Repair/Replacement of internal rewiring and E/M fittings/fixtures and allied work of zone C and D at old cant Allahabad.

Amount

Taking down carefully point wiring of any type and any description / caping or concealed [light point, fan point or socket point] including removal of battens, pipes, plug sockets, switches, shades, ceiling roses, light fittings etc complete and making good disturbed surface to match the exisitng, complete all as specified and directed.

Taking down main switches, distribution boards and cut outs of any capacity along with the exisitng boards and removing the same from site and making good disturbed surface or portion of walls complete all as specified & directed.

Taking down carefully sub main wiring of any numbers of wire on wooden batten or surface conduit or concealed conduits/ casing caping any type complete all as specified & directed.

Point wiring complete with PVC insulated unsheatehd, 1100 volts grade cable 1.5 sq.mm (nominal area) FR type multi stranded copper conductor, single core drawn in and including not less than 20mm dia rigid PVC conduit 'medium grade' ISI marked including all conduit accessories, including provision of concealed pressed steel terminal box of required size not less than 1.6 mm thick factory made duly painted inside and outside with two coats of black bituminous paint over and including a coat of red oxide primer, with 3.0 mm thick top cover of plastic laminated sheet of required colour for mounting switch, sockets, fan regulator etc, including 1.5 sq.mm FR type PVC insulated unsheathed cable multi stranded copper conductor of green colour as continuous earth wire and connected to earth dolly as required at site and including chases cutting and making good the disturbed surface and applying finishes to match the existing surface, complete all as specified and directed for the following:-

(a) One light / fan / bell / exhaust fan point, controlled by one one-way 5Amp switch

(b) One light point controlled by two, two way switches.

(c) One 3 pin, 5 Amp socket outlet on the same board with other switches

(d) One 3 pin, 5 Amp socket outlet point on an independent board.

Point wiring complete with PVC insulated unsheatehd, 1100 volts grade cable 2.5 sq.mm (nominal area) FR type multi stranded copper conductor, single core drawn in and including not less than 20mm dia rigid PVC conduit 'medium grade' ISI marked including all conduit accessories for concealed wiring for socket outlet, 3 pin, 15 Amps including provision of concealed opressed steel terminal box of required size not less than 1.6 mm thick factory made duly painted inside and outside with two coats of black bituminous paint over and including a coat of red oxide primer, with 3.0 mm thick top cover of plastic lmainated sheet of required colour for mounting switch, sockets, fan regulator etc, including 2.5 sq.mm FR type PVC insulated unsheathed cable multi stranded copper conductor of green colour as continuous earth wire and connected to earth dolly as required at site and including chases cutting and making good the disturbed surface and applying finishes to match the existing surface, complete all as specified and directed.

Point wiring complete with PVC insulated unsheatehd, 1100 volts grade cable 1.5 sq.mm (nominal area) FR type multi stranded copper conductor, single core drawn in and including PVC casing and caping (ISI marked with thickness not less than 1.2mm) including all accessories, including provision of concealed pressed steel terminal box of required size not less than 1.6 mm thick factory made duly painted inside and outside with two coats of black bituminous paint over and including a coat of red oxide primer, with 3.0 mm thick top cover of plastic laminated sheet of required colour for mounting switch, sockets, fan regulator etc, including 1.5 sq.mm FR type PVC insulated unsheathed cable multi stranded copper conductor of green colour as continuous earth wire and connected to earth dolly as required at site and including chases cutting and making good the disturbed surface and applying finishes to match the existing surface, complete all as specified and directed for the following:-

(a) One light / fan / bell / exhaust fan point, controlled by one one-way 5Amp switch

(b) One 3 pin, 5 Amp socket outlet on the same board with other switches

(c) One 3 pin, 5 Amp socket outlet point on an independent board.

Point wiring complete with PVC insulated unsheatehd, 1100 volts grade cable 2.5 sq.mm (nominal area) FR type multi stranded copper conductor, single core drawn in and including PVC casing and caping (ISI marked with thickness not less than 1.2mm) including all accessories for socket outlet, 3 pin, 15 Amps including provision of concealed pressed steel terminal box of required size not less than 1.6 mm thick factory made duly painted inside and outside with two coats of black bituminous paint over and including a coat of red oxide primer, with 3.0 mm thick top cover of plastic laminated sheet of required colour for mounting switch, sockets, fan regulator etc, including 2.5 sq.mm FR type PVC insulated unsheathed cable multi stranded copper conductor of green colour as continuous earth wire and connected to earth dolly as required at site and including chases cutting and making good the disturbed surface and applying finishes to match the existing surface, complete all as specified and directed.

Point wiring complete with 1.5 sq.mm PVC insulated unsheathed multi-stranded FR copper conductor 1100 Volts grade, ISI marked, drawn in existing PVC / Mild Steel conduit with 3.0 mm thick prelaminated sheet cover of colour as approved and duly concealed in walls for housing switches, sockets, regulators etc., including 1.5sq.mm PVC insulated unsheathed multi-stranded FR copper conductor cable of green colour, as earth continuity conductor and connecting to common earth dolly, complete all as specified and directed. NOTE:- (i) The quoted rate shall deemed to include the cost of pressed steel terminal boxes, prelaminated sheet cover etc. (ii) Quoted rate shall also deemed to include cost of making necessary chases in walls for inserting metal boxes and making good the disturbed surfaces to match with existing complete all as specified & directed for following point wirings:---

(a) One light / fan / bell / exhaust fan point, controlled by one one-way 5Amp switch

(b) One 3 pin, 5 Amp socket outlet point on an independent board.

(c) One light point controlled by two, two way switches.

(d) One buzzer or bell point controlled by one one-way switch

Point wiring complete with 2.5 sq.mm PVC insulated unsheathed multi-stranded FRLS copper conductor 1100 Volts grade, ISI marked, drawn in existing PVC / Mild Steel conduit for socket outlet 15 Amps, with 3.0mm thick prelaminated sheet cover of colour as approved and duly concealed in walls for housing switches, sockets, regulators etc., including 2.5 sq.mm PVC insulated unsheathed multi-stranded FRLS copper conductor cable of green colour, as earth continuity conductor and connecting to common earth dolly, complete all as specified and directed. NOTE:- (i) The quoted rate shall deemed to include the cost of pressed steel terminal boxes, prelaminated sheet cover etc. (ii) Quoted rate shall also deemed to include cost of making necessary chases in walls for inserting metal boxes and making good the disturbed surfaces to match with existing complete all as specified & directed.

Sub main wiring complete with 2 runs of 4 sq.mm PVC insulated and unsheathed 1100V grade multistranded copper conductor cable drawn through and including provision of PVC rigid conduit 20mm dia and accessories connecting terminal ends to DB's including providing 1 run of 4 sq.mm PVC insulated unsheathed multistranded copper cable as earth continuity conductor and connecting to common earth dolly including making good disturbed surfaces to match with existing including sinking of boxes , complete all as specified and directed. NOTE:- (i) Two runs of 4 sq.mm copper conductor, one run of 4 sq.mm copper earth continuity conductor and one run of PVC rigid conduit and with accessories shall be measured as one unit length. (ii) Extra length of cable / wire required for connection to MCBs shall not be measured and the rate quoted per unit shall deemed to be inclusive of the same accordingly.

Sub main wiring complete with 2 runs of 6 sq.mm PVC insulated and unsheathed 1100V grade multistranded copper conductor cable drawn through and including provision of PVC rigid conduit 20mm dia and accessories connecting terminal ends to DB's including providing 1 run of 6 sq.mm PVC insulated unsheathed multistranded copper cable as earth continuity conductor and connecting to common earth dolly including and making good disturbed surfaces to match with existing including sinking of boxes , complete all as specified and directed. NOTE:- (i) Two runs of 6 sq.mm copper conductor, one run of 6 sq.mm copper earth continuity conductor and one run of PVC rigid conduit and with accessories shall be measured as one unit length. (ii) Extra length of cable / wire required for connection to MCBs shall not be measured and the rate quoted per unit shall deemed to be inclusive of the same accordingly.

Sub main wiring complete with 2 runs of 6 sq.mm PVC insulated and unsheathed 1100V grade multistranded copper conductor cable drawn through and including surface casing and caping and accessories connecting terminal ends to DB's including providing 1 run of 6 sq.mm PVC insulated unsheathed multistranded copper cable as earth continuity conductor and connecting to common earth dolly including making good disturbed surfaces to match with existing including sinking of boxes , complete all as specified and directed. NOTE:- (i) Two runs of 6 sq.mm copper conductor, one run of 6 sq.mm copper earth continuity conductor and one run of PVC rigid conduit and with accessories shall be measured as one unit length. (ii) Extra length of cable / wire required for connection to MCBs shall not be measured and the rate quoted per unit shall deemed to be inclusive of the same accordingly.

Sub main wiring complete with 2 runs of 10 sq.mm PVC insulated and unsheathed 1100V grade multistranded copper conductor cable drawn through and including provision of PVC rigid conduit 25mm dia and accessories connecting terminal ends to DB's including providing 1 run of 10 sq.mm PVC insulated unsheathed multistranded copper cable as earth continuity conductor and connecting to common earth dolly including making good disturbed surfaces to match with existing including sinking of boxes , complete all as specified and directed. NOTE:- (i) Two runs of 10 sq.mm copper conductor, one run of 10 sq.mm copper earth continuity conductor and one run of PVC rigid conduit and with accessories shall be measured as one unit length. (ii) Extra length of cable / wire required for connection to MCBs shall not be measured and the rate quoted per unit shall deemed to be inclusive of the same accordingly.

Sub main wiring complete with 4 runs of 16 sq.mm PVC insulated and unsheathed 1100V grade multistranded copper conductor cable drawn through and including provision of PVC rigid conduit 32mm dia and accessories connecting terminal ends to DB's including providing 2 run of 16 sq.mm PVC insulated unsheathed multistranded copper cable as earth continuity conductor and connecting to common earth dolly including making good disturbed surfaces to match with existing including sinking of boxes , complete all as specified and directed. NOTE:- (i) Four runs of 16 sq.mm copper conductor, two run of 16 sq.mm copper earth continuity conductor and one run of PVC rigid conduit and with accessories shall be measured as one unit length. (ii) Extra length of cable / wire required for connection to MCBs shall not be measured and the rate quoted per unit shall deemed to be inclusive of the same accordingly.

Sub main wiring complete with 2 runs of 6 sq.mm PVC insulated and unsheathed 1100V grade multistranded FRLS grade copper conductor cable drawn through existing conduit and accessories connecting terminal ends to DB's including providing 1 run of 6 sq.mm PVC insulated unsheathed multistranded FRLS grade copper cable as earth continuity conductor and connecting to common earth dolly including taking down existing sub main wiring any type and making good disturbed surfaces to match with existing including sinking of boxes , complete all as specified and directed. NOTE:- (i) Two runs of 6 sq.mm copper conductor, one run of 6 sq.mm copper earth continuity conductor and one run of PVC rigid conduit and with accessories shall be measured as one unit length. (ii) Extra length of cable / wire required for connection to MCBs shall not be measured and the rate quoted per unit shall deemed to be inclusive of the same accordingly.

Switch piano, flush type single pole, one way 5/6 Amp 240 volts, ISI marked, complete all as specified and directed.

Switch piano, single pole, one way 15 Amp 240 volts, ISI marked, complete all as specified and directed.

Switch piano, single pole, two way 5 Amp 240 volts, ISI marked, complete all as specified and directed.

Switches, bell push, flush type, 5 amp, fixed in repairs, complete all as specified and directed.

Socket outlet, 2 in 1, 5 pin, 5/6 Amps 240 Volts, flush type, fixed in repairs, complete all as specified and directed.

Socket outlet, 2 in 1, 6 pin, 15 Amps 240 Volts, flush type, fixed in repairs, complete all as specified and directed.

Lamp holder, PVC/polycarbonate body with back plate/ cord grip cap suitable for batten/ angle/ pendent fittings, fixed in repairs complete all as specified and directed.

Ceiling rose, single phase, PVC / polycarbonate, insulated body, three terminals, surface bakelite sheet 63.5mm dia, fixed in repairs, complete all as specified and directed.

Stepped type electronic fan regulator flush type duly fixed on the existing phenolic laminated sheet etc. as required, 240V, humming free, 2 module, ISI marked, complete all as specified and directed.

Electric bell ding dong type AC 230 Volt 50 hz single pole, ISI marked, complete all as specified and directed.

Taking down existing ceiling fan, any sweep, by disconnecting carefully all electric connection and refixing the same after necessary repair work as required (such as cleaning all the serviceable parts thoroughly, reassembling the fan after testing for proper functioning), with and including provision of electrical wire 3-core 23/0.0076 copper conductor, complete all as specirfied and directed. NOTE : The quoted shall deemed to be inclusive of every minor items i.e., nut, bolts, screws, lugs etc., which are fairly required for the smooth functioning of fans.

Taking down existing light fittings any type, removing from site, keeping in safe custody and again refixing light fitting any type and connection with three core flexible copper conductor cable, complete all as specified and directed.

Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20Amp 240V, complete all as specified and directed.

LED luminaire soft light glare free symmetrical illumination surface mounting ceiling light 2' x 2' panel fitting 36W LED high lumen efficasy LED lighting fixture, environmental friendly, energy efficient complete with all accessories, prewired and making connection with and including 23/0.0076 flexible copper wire two core from connector to ceiling rose not more than 1.2mtr, fixed on wall firmly complete all as specified and directed. Make : Havells model pluto panel 2X2 Neo Cat Part No- PLUTONEO 2X2 PLR34WLED8405 or techno-commercially equivalent model in Bajaj or Philips as approved by GE.

LED street light 25W, 230V single phase AC electric supply with necessary MS pipe 25mm bent to shape and fixed to wall with MS clamps made of MS 40 X 6 with necessary nut, bolts and washers, connecting upto ceiling rose with help of 3 core PVC insulated copper conductor cable of 1.5Sq mm complete all as specified & directed. MAKE: Wipro cat part No. LR02-291-xxx-57-xx/ Bajaj Cat part No. BRLEP25W LEDWH or techno-commercially equivalent model in Havells or Philips as approved by GE.

LED tube light fitting 1 x 18 watt, LED 6000 K decorative , ultra slim linear LED lighting fixture with co extruded polycarbonate body , environmental friendly , energy efficient complete with all accessories, prewired and making connection with and including 23/0.0076 flexible copper wire two core from connector to ceiling rose not more than 1.2 mtr, fixed on wall firmly complete all as specified and directed. Make : E-Lite LED Pride Plus -18 W of Havells Cat Part No. LHEXBLP7PN1W018/ Crompton Trim Linea Cat part no. LCTL-18-CDL/ Bajaj cat part No. BCLSB18 W

LED mirror light fitting 1 x 9/10 watt, LED 6000 K decorative , indirect up down LED lighting fixture with co extruded polycarbonate body , environmental friendly , energy efficient complete with all accessories, prewired and making connection with and including 23/0.0076 flexible copper wire two core from connector to ceiling rose not more than 1.2 mtr, fixed on wall firmly complete all as specified and directed.

LED bulk head light fitting 10 W LED 600 Lumen enclosed in polycarbonate body, weather proof, LED lighting fixture with co extruded polycarbonate body , environmental friendly , energy efficient complete with all accessories, prewired and making connection with and including 23/0.0076 flexible copper wire two core from connector to ceiling rose not more than 1.2 mtr, fixed on wall firmly complete all as specified and directed. Make : Havell's Cat Part No. HEXAFT10WLED857SSYMBOPC / Bajaj Model Wee Plus Cat Part No. BIBWP10LED or techno-commercially equivalent model in Crompton or Philips as approved by GE.

Wall mounting light fitting 15 watt polycarbonate body, decorative unbreakable complete with all accessories, prewired and making connection with and including 23/0.0076 flexible copper wire three core from connector to ceiling rose not more than 1.2 mtr, fixed on wall firmly complete all as specified and directed. Make : Havells Model LHFODFE1TC1W015 or equivalent of Philips/ Crompton/ Bajaj.

LED ceiling mounted light fitting 12 W LED 6000 K surface decorative type polycarbonate body, LED lighting fixture , environmental friendly , energy efficient complete with all accessories, prewired and making connection with and including 23/0.0076 flexible copper wire three core from connector to ceiling rose not more than 1.2 mtr, fixed on ceiling/wall complete all as specified and directed. Make : CROMPTON GREAVES Cat part No. LCSR12-CDL/ Bajaj model : TARA, Cat Part No. : BGCML 12 WH

LED spot light fitting 6 W LED 6000 K interior decorative type polycarbonate body, LED lighting fixture , environmental friendly , energy efficient complete with all accessories, prewired and making connection with and including 23/0.0076 flexible copper wire three core from connector to ceiling rose not more than 1.2 mtr, fixed on ceiling complete all as specified and directed. Make : CROMPTON GREAVES Cat part No. LCSSR-6-CDL/TL/WW or Havells Cat part No LHEBKJPIZ1W005 or techno-commercially equivalent in Bajaj /Philips

LED spot light fitting 9 W LED 6000 K interior decorative type polycarbonate body, LED lighting fixture , environmental friendly , energy efficient complete with all accessories, prewired and making connection with and including 23/0.0076 flexible copper wire three core from connector to ceiling rose not more than 1.2 mtr, fixed on ceiling complete all as specified and directed. Make : CROMPTON GREAVES Cat part No. LCSSR-6-CDL/TL/WW or Havells LHEBKJP7IZ1W009 or techno-commercially equivalent in Bajaj /Philips

LED spot light fitting 12 W LED 6000 K interior decorative type polycarbonate body, LED lighting fixture , environmental friendly , energy efficient complete with all accessories, prewired and making connection with and including 23/0.0076 flexible copper wire three core from connector to ceiling rose not more than 1.2 mtr, fixed on ceiling complete all as specified and directed. Make : CROMPTON GREAVES Cat part No. LCDN-12-CDL/TL/WW or Havells Endura HO ENDURAHOLDR12WLED857S or techno-commercially equivalent in Bajaj /Philips

Earthing complete with GI earth plate electrode 600mm x 600mm x 6mm thick buried directly in ground vertically to a depth of not less than 2.25m deep below ground level with the top edge of earth plate at a depth of not less than 1.5m below ground level connected to GI earth lead of 4mm dia by means of bolts, nuts, washers of galvanised iron or steel, GI earth wire shall be protected by 15mm dia GI pipe 'medium grade', GI wire meshed funnel, alternate layer of charcoal and salt on all side to earth plate upto a thickness of 150mm, filling of black cotton soil in earth pit upto GL and connected to earth plate including necessary excavation & earthwork, PCC (1:2:4) type B-1 earth chamber and mild steel angle iron frame 25 x 25 x 6 mm and 40mm thick pre-cast RCC cover (1:2:4), type B-1 (using 20mm graded crushed aggregate) mix with 6mm dia MS bars @75mm c/c both ways, mild steel handle 12mm dia, PGI funnel and wire mesh, 20mm dia GI pipe light grade(ISI marked) for watering, etc complete all as shown in electrical plate No.3 of SSR Part-1, connected to earthing test point, including testing on completion, complete all as speciifed and as directed. NOTE:- The quoted rates shall also deemed to include the cost of Earth Test point and earth wire and protection pipe upto 7.5 metre beyond the earth plates electrode.

Sheet metal enclousre for MCCB DB TPN, 4 way, double door vertical, 415 Volts with 200 Amp rated bus bars and provision of MCCB of 160A TPN, breaking capacity 25KA with thermal magnatic release, as incomer and 6 Nos. MCB single pole,6 amp to 32 amp, B series bracking capacity 10 KA as outgoing, complete all as specified and directed.

Sheet metal enclosure for Double Door DBs when MCBs to be used SPN 230 V, 8 Way with 200 amps rated bus bar complete with incoming/outgoing connection through proper size of lugs complete all as directed.

Sheet metal enclosure for Double Door DBs when MCBs to be used TPN 4 Way 230 V with 200 amps rated bus bar complete with incoming/outgoing connection through proper size of lugs complete all as directed.

MCB SPN 6-32 Amp, 240 volts 10 KA 'B series' complete all as specified and directed.

MCB SP 6-32 amps 230 Volts, 10 KA 'B series' complete all as specified and directed.

MCB TPN, four pole 63 Amp, 415 volts 10 KA 'C series' complete all as specified and directed.

LED panel driver powered by an independent, SELV output electronic LED driver (SMPS based constant current supply suitable for 240 volt for 20/22 watt fitting Make Havells Cat part No LSSCRX2205 or techno-commecially equivalent make of Philips/Bajaj all as specified and directed.

LED panel driver powered by an independent, SELV output electronic LED driver (SMPS based constant current supply suitable for 240 volt for 34/36 watt fitting Make Havells Cat part No LSSCRX2208 or techno-commercially equivalent make of Philips/Bajaj all as specified and directed.

Air termination single pointed Aluminium rod 12mm dia, 300mm long including fixing with PCC on roof top, complete all as specified and directed.

Aluminium strip 25 x 3.15mm with saddles and fixing screws etc. for roof conductors and down conductors above ground, complete all as specified and directed.

Galvanised iron strip 25 x 4mm with saddles and fixing screws etc. for roof conductors and down conductors above ground, complete all as specified and directed.

Test point terminal block made of 01 mtr phosphor bronze of size 75 x 75 x 25mm drilled and screwed including 03 Nos 8mm dia 25mm long hexagonal lead screws, complete all as specified and directed.

Earthing complete with using copper plate electrode 600mm x 600mm x 3.15 mm thick buried directly in ground (earth pit not less than 2.25 m deep below ground level) with top edge of earth plate not less than 1.5m below the ground level connected to cppper strip 20 x 3 mm by means of bolts nuts check nuts and washers of galvanised iron at 2 points & GI pipe 15 mm bore light grade for protection of earthing wire PCC chamber 1:3:6 (type C-1) using 20mm graded stone aggregate, watering pipe 20mm bore light grade, funnel with wire mesh, 50 mm thick cover of RCC 1:2:4 type B-1 using 20mm graded stone aggregate reinforced with 8 mm TMT bars at 80 mm centre to centre both ways and charcoal dust and common salt all as shown in electrical plate No. 3 of MES SSR part-I and as specified including excavation & earth work & connecting the earthing point/equipment and testing complete all as specified & directed.

Galvanised Tube"medium grade" 40mm dia with all fittings and fixed to walls and ceiling or laid in floors, fixed in repairs,complete all as specified and directed.

Mohit Enterprises

PITAMBARI TRADERS

R K GUPTA AND SONS

Raj Contruction