Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Tender Value
₹5.9 Cr
EMD Value
₹11.8 L
Closing Date
4 Dec 2026, 3:00 pm
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
Above/Below/Par
BUILDING
14 conditions · 3 needing a document upload
Financial Eligibility Criteria: The tenderer must have minimum average annual contractual turnover of V/N or V whichever is less; where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet. Non submission of the documents shall lead to summarily rejection of the offer.
The tender is for Composite works. The work involves Civil Engineering works and Electrical Works. In terms of Clause 10.1 (b) (1) of part of I of IRGCC April 2022: tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited:(i)Three similar works each costing not less than the amount equal to 30% of advertised value of each component of tender, or (ii) Two similar works each costing not less than the amount equal to 40% of advertised value of each component of tender, or(iii)One similar work each costing not less than the amount equal to 60% of advertised value of each component of tender. Note: Separate completed works of minimum required values shall also be considered for fulfillment of technical eligibility criteria for different components. Seprate value of Tender :- Civil Engineering works (Part-A to E) -Rs 4,73,21,344.86 and Electrical Wo rk s (Part-F) -Rs 1,18,93,245.18. To evaluate the technical eligibility of tenderer, only components of work as stipulated in tender documents for evaluation of technical eligibility, shall be considered. The scope of work covered in other remaining components shall be either executed by tenderer himself if he has work experience as mentioned in clause 7 of the Standard General Conditions of Contractor through subcontractor fulfilling the requirements as per clause 7 of the Standard General Conditions of Contract or jointly i.e., partly himself and remaining through subcontractor, with prior approval of Chief Engineer in writing. However, if required in tender documents by way of Special Conditions, a formal agreement duly notarized, legally enforceable in the court of law, shall be executed by the main contractor with the subcontractor for the component(s) of work proposed to be executed by the subcontractor(s), and shall be submitted along with the offer for considering subletting of that scope of work towards fulfillment of technical eligibility. Such subcontractor must fulfill technical eligibility criteria as follows: The sub contractor shall have successfully completed at least one work similar to work proposed for subcontract, costing not less than 35% value of work to be subletted, in last 5 years, ending last day of month previous to the one in which tender is invited through a works contract.
Similar nature work defined for Civil Engineering work- "Any Civil construction or repair work". Similar nature work defined for Electrical Work- "(i) Erection & Commissioning of 11/33 KV overhead lines, (ii) Installation & Commissioning of 11/33 KV substation, (iii) Installation & Commissioning of electrical cabling works of 11/33 kv, (iv) Laying & Commissioning of electrical cabling works of 11/33 kv (Any above work or combination of (i) to (iv) above)".
19 conditions · 3 needing a document upload
The local content requirement for this work is minimum 50% for Make in India compliance. If the tenderer does not submit the required local content percentage in the proposal submitted, the proposal will be summarily rejected. The tenderer has to enter the local content percentage as required, under Sr.No. 2 of Commercial-Compliance with their offer
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Indian Railways Standard General Conditions of Contract, April 2022 (IRGCC, April 2022) with correction slips issued up to date of inviting tender will be applicable for this tender.
If the bidder submits Bid Security in form of Bank Guarantee,"The Original Bank Guarantee should be delivered in person in this office (i.e. in Receive and Dispatch Section of DRM office, Engineering Branch, West Central Railway, Jabalpur) before closing date for submission of bids (i.e. excluding the last date of submission of bids)
Jabalpur- Construction of new Running Room having capacity of 80 beds at JBP under Assistant Divisional Engineer (HQ) Jabalpur sub-division.
DRMW-JBP-224-2026~WCR
DRMW-JBP-224-2026
Open
Works - General
18 Months
Jabalpur, Madhya Pradesh
₹0
₹11.8 L
6 Nov 2026
6 Nov 2026
20 Nov 2026
283 items across 81 schedules · ₹5,64,99,471.94 total
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| 1 | Disposal of moorum/building rubbish/ malba/ similar unserviceable, dismantled or waste material by mechanical transport including loading, transporting, unloading to approved municipal dumping ground for lead upto 10 km for all lifts, complete as per directions of Engineer-in-charge. | cum | 873 | 411.3 | 3,59,064.9 |
| 2 | All kinds of soil | cum | 1453 | 205.45 | 2,98,518.85 |
| 3 | All kinds of soil | cum | 698 | 104.5 | 72,941 |
| 4 | Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete. | cum | 60 | 2,161.2 | 1,29,672 |
| 5 | All kinds of soil | Sqm | 233 | 28.15 | 6,558.95 |
| 6 | Chlorpyriphos emulsifiable concentrate of 20% | Litre | 4167 | 200.9 | 8,37,150.3 |
| 7 | With Chlorpyriphos E.C. 20% with 1% concentration | Sqm | 364 | 256.15 | 93,238.6 |
| 8 | 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) | cum | 70 | 7,365.15 | 5,15,560.5 |
| 9 | 1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) | cum | 55 | 6,833.4 | 3,75,837 |
| 10 | 1:1.5:3 (1 cement : 1.5 coarse sand (zone- III) derived from natural sources: 3 graded stone aggregate 20 mm nominal size derived from natural sources) | cum | 364 | 8,364.2 | 30,44,568.8 |
| 11 | 1:1.5:3 (1 cement : 1.5 coarse sand(zone- III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) | cum | 128 | 10,185.05 | 13,03,686.4 |
| 12 | cum | 398 | 10,719.3 | 42,66,281.4 | |
| 13 | Foundations, footings, bases of columns, etc. for mass concrete | Sqm | 161 | 307.95 | 49,579.95 |
| 14 | Suspended floors, roofs, landings, balconies and access platform | Sqm | 1453 | 766.55 | 11,13,797.15 |
| 15 | Lintels, beams, plinth beams, girders, bressumers and cantilevers | Sqm | 1671 | 608.35 | 10,16,552.85 |
| 16 | Columns, Pillars, Piers, Abutments, Posts and Struts | Sqm | 1744 | 804.25 | 14,02,612 |
| 17 | Small lintels not exceeding 1.5 m clear span, moulding as in cornices, window sills, string courses, bands, copings, bed plates, anchor blocks and the like | Sqm | 41 | 307.95 | 12,625.95 |
| 18 | Weather shade, Chajjas, corbels etc., including edges | Sqm | 189 | 814.95 | 1,54,025.55 |
| 19 | Providing, hoisting and fixing above plinth level up to floor five level precast reinforced cement concrete work in string courses, bands, copings, bed plates, anchor blocks, plain window sills and the like, including the cost of required centering, shuttering but , excluding cost of reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). | cum | 7 | 9,673.5 | 67,714.5 |
| 20 | Thermo-Mechanically Treated bars of grade Fe-500D or more. | Kg | 47928 | 89.65 | 42,96,745.2 |
| 21 | Thermo-Mechanically Treated bars of grade Fe-500D or more. | Kg | 58094 | 89.65 | 52,08,127.1 |
| 22 | Cement mortar 1:4 (1 cement : 4 coarse sand) | cum | 18 | 6,882 | 1,23,876 |
| 23 | Cement mortar 1:4 (1 cement : 4 coarse sand) | cum | 437 | 8,414.65 | 36,77,202.05 |
| 24 | Area of slab over 0.50 sqm | Sqm | 18 | 4,425.35 | 79,656.3 |
| 25 | Granite work | Metre | 41 | 418.85 | 17,172.85 |
| 26 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. | Sqm | 873 | 1,063.45 | 9,28,391.85 |
| 27 | Sal wood | cum | 3 | 1,06,720.85 | 3,20,162.55 |
| 28 | 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws | Sqm | 85 | 2,818.5 | 2,39,572.5 |
| 29 | Kiln seasoned selected class of sheesham wood | Sqm | 63 | 3,626.55 | 2,28,472.65 |
| 30 | 300x16 mm | Each | 85 | 180.55 | 15,346.75 |
| 31 | 75x47x1.80 mm | Each | 106 | 64.2 | 6,805.2 |
| 32 | 150x10 mm | Each | 51 | 232.3 | 11,847.3 |
| 33 | 250x16 mm | Each | 77 | 234.9 | 18,087.3 |
| 34 | 125 mm | Each | 77 | 60.05 | 4,623.85 |
| 35 | Providing and fixing factory made P.V.C. door frame of size 50x47 mm with awall thickness of 5 mm, made out of extruded 5mm rigid PVC foam sheet, mitred at corners and joined with 2 Nos of 150 mm long brackets of 15x15 mm M.S. square tube, the vertical door frame profiles to be reinforced with 19x19 mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100 mm size, complete as per manufacturer's specification and direction of Engineer- in- Charge. | Metre | 176 | 408.25 | 71,852 |
| 36 | 30 mm thick plain PVC door shutters | Sqm | 55 | 2,455.1 | 1,35,030.5 |
| 37 | Three track three panels sliding window with fly proof SS wire mesh (Two nos. glazed & one no. wire mesh panels) made of (small series) frame 92 x 44 mm & sash 32 x 60 mm both having wall thickness of 1.9 +/- 0.2 mm and single glazing bead of appropriate dimension (Area of window upto 1.75 sqm). | Sqm | 132 | 10,030.3 | 13,23,999.6 |
| 38 | Providing and fixing 19mm thick both side balancing lamination factory pressed BWP grade marine ply as per IS 710 of approved brand boxes,shelves,racks,almirah,cupboard and drawer etc. including necessary nails,screws etc. complete as per direction of Engineer-in-charge. | Sqm | 117 | 2,339.6 | 2,73,733.2 |
| 39 | 200 mm | Each | 66 | 153.15 | 10,107.9 |
| 40 | Providing and fixing stainless steel soft closing spring hinges at 0 degree hinges (hydraulic type) of approved make/brand to cupboard shutters with full threaded steel screws including making necessary recess in board and finished etc. complete as per direction of Engineer-in-charge. | Each | 176 | 226.75 | 39,908 |
| 41 | Providing and fixing stainless steel soft closing heavy type telescopic drawer channels of approved make 500 mm long with screws etc. complete as per directions of Engineer- in-charge. | Set | 66 | 749.7 | 49,480.2 |
| 42 | Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6 mm, with 40 mm dia steel pulleys, complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer. | Sqm | 23 | 9,397.35 | 2,16,139.05 |
| 43 | Hot finished welded type tubes | Kg | 4067 | 154.9 | 6,29,978.3 |
| 44 | In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works | Kg | 14524 | 142.3 | 20,66,765.2 |
| 45 | Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). | Kg | 2905 | 612.25 | 17,78,586.25 |
| 46 | Dark shade pigment using ordinary cement | Sqm | 18 | 983.95 | 17,711.1 |
| 47 | 25 mm thick | Sqm | 60 | 1,706.6 | 1,02,396 |
| 48 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete. | Sqm | 204 | 935.6 | 1,90,862.4 |
| 49 | Size of Tile 600x600 mm | Sqm | 1635 | 1,416.65 | 23,16,222.75 |
| 50 | 75 mm diameter | Metre | 88 | 213 | 18,744 |
| 51 | 110 mm diameter | Metre | 233 | 319.75 | 74,501.75 |
| 52 | 75 mm bend | Each | 8 | 91.8 | 734.4 |
| 53 | 110 mm bend | Each | 15 | 132 | 1,980 |
| 54 | 75 mm | Each | 30 | 310.85 | 9,325.5 |
| 55 | 110 mm | Each | 66 | 309.5 | 20,427 |
| 56 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in- charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15- 18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | Sqm | 117 | 671.55 | 78,571.35 |
| 57 | 1:4 (1 cement: 4 fine sand) | Sqm | 8715 | 339.7 | 29,60,485.5 |
| 58 | 1:4 (1 cement: 4 fine sand) | Sqm | 17 | 361.3 | 6,142.1 |
| 59 | Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete. | Sqm | 8279 | 214.3 | 17,74,189.7 |
| 60 | Two or more coats on new work | Sqm | 8279 | 137.85 | 11,41,260.15 |
| 61 | Two or more coats on new work | Sqm | 393 | 131.45 | 51,659.85 |
| 62 | Providing and laying 60mm thick factory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge. | Sqm | 233 | 951 | 2,21,583 |
| 63 | Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in- charge). | cum | 2 | 8,613.55 | 17,227.1 |
| 64 | White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests | Each | 4 | 5,781.35 | 23,125.4 |
| 65 | W.C. pan with ISI marked white solid plastic seat and lid | Each | 4 | 5,540.55 | 22,162.2 |
| 66 | One urinal basin with 5 litre white P.V.C. automatic flushing cistern | Each | 4 | 5,268.85 | 21,075.4 |
| 67 | White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps | Each | 34 | 2,040.85 | 69,388.9 |
| 68 | White Vitreous China Flat back wash basin size 550x 400 mm with single 15 mm C.P. brass pillar tap | Each | 4 | 1,679.6 | 6,718.4 |
| 69 | Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings. | Each | 36 | 1,500.05 | 54,001.8 |
| 70 | 510x1040 mm bowl depth 250 mm | Each | 3 | 6,008.45 | 18,025.35 |
| 71 | Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge. | Each | 23 | 299.35 | 6,885.05 |
| 72 | 32 mm dia | Each | 41 | 104.35 | 4,278.35 |
| 73 | 32 mm nominal dia Pipes | Metre | 146 | 500.95 | 73,138.7 |
| 74 | 40 mm nominal dia Pipes | Metre | 48 | 674.35 | 32,368.8 |
| 75 | 20 mm nominal dia Pipes | Metre | 350 | 513.75 | 1,79,812.5 |
| 76 | 25 mm nominal dia Pipes | Metre | 204 | 626.05 | 1,27,714.2 |
| 77 | 20 mm dia nominal bore | Metre | 66 | 373.35 | 24,641.1 |
| 78 | 25 mm dia nominal bore | Metre | 138 | 491.2 | 67,785.6 |
| 79 | 40 mm dia nominal bore | Metre | 66 | 725.15 | 47,859.9 |
| 80 | 20 mm dia nominal bore | Metre | 21 | 315.35 | 6,622.35 |
| 81 | 25 mm dia nominal bore | Metre | 19 | 417.95 | 7,941.05 |
| 82 | 40 mm dia nominal bore | Metre | 117 | 558.35 | 65,326.95 |
| 83 | 40 mm nominal bore | Each | 7 | 707.3 | 4,951.1 |
| 84 | 25 mm nominal bore | Each | 10 | 399.15 | 3,991.5 |
| 85 | 15 mm nominal bore | Each | 168 | 85.2 | 14,313.6 |
| 86 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. | Litre | 37000 | 9.7 | 3,58,900 |
| 87 | 15 mm nominal bore | Each | 7 | 434.2 | 3,039.4 |
| 88 | 15 mm nominal bore | Each | 66 | 708.4 | 46,754.4 |
| 89 | 15mm nominal bore | Each | 138 | 500.35 | 69,048.3 |
| 90 | 150 mm nominal size square 100 mm diameter of the inner hinged round grating | Each | 36 | 169.7 | 6,109.2 |
| 91 | 150 mm dia. R.C.C. pipe | Metre | 45 | 493.1 | 22,189.5 |
| 92 | 300 mm dia. R.C.C. pipe | Metre | 18 | 902.05 | 16,236.9 |
| 93 | Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) | Kg | 117 | 433.95 | 50,772.15 |
| 94 | Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) | Kg | 46 | 531.8 | 24,462.8 |
| 95 | With float glass panes of 4.0 mm thickness (weight not less than 10kg/sqm) | Sqm | 117 | 1,019.8 | 1,19,316.6 |
| 96 | Supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20 cm, in recharge pit, in the required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge. | cum | 13 | 1,302.3 | 16,929.9 |
| 97 | With semi perforated 12 mm thick micro tegular edged GRG false ceiling tiles. | Sqm | 873 | 1,690.45 | 14,75,762.85 |
| Schedule total | ₹4,89,87,330.15 | ||||
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
letterforcredit.pdf
ATTACHMENT
AnnexureVIB.pdf
ATTACHMENT
PreferencetoMakeinIndialetterdated20.08.2024_compressed.pdf
ATTACHMENT
Listofapprovedbrand.pdf
ATTACHMENT
RlyBdsletterdated03.6.24JPO-CableCut.pdf
ATTACHMENT
ElectricalConditionRunningRoom.pdf
ATTACHMENT
IRGCCApril2022correctionslipupto12.pdf
ATTACHMENT
SpecialconditionsofCivilWork.pdf
ATTACHMENT
Embletter.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .