Construction of Sub Health Centre at village Bham Bhewa in Distt. Jind. (Pdg. E.I. and Street light only)

Amount

( c ) Moulded case Circuit breakers. 31.12 (c) Supply and erection of moulded case circuit breakers on wall or on existing pedestal including bonding to earth and necessary connections.

31.12 c (i) 15 amp.to 60 amp.415 V,10 KA 3-phase

(L) Miniature Circuit Breaker and Isolator. 31.17 Supply and erection of miniature circuit breaker / isolator 240 /415 V in the existing distribution board including making necessary connections.

(a) Miniature circuit breakers of 9 KA breaking capacity.

31.17a) (ii) SP MCB 6 amp. to 32 amp

31.17(a) (ii) TP MCB 6 amp. to 32 amp.

31.17(a) (ii) TPN MCB 6 amp. to 32 amp

(M) Supply and erection of Fittings and Accessories.

31.18 (vii) Call bell 220 / 230 volts A.C. bakelite with double coil.

31.18 (ix) (b) Bell push flush type ( without flexible wire ) in existing sheet.

31.18 (xi) Bakelite angle / straight button holder large size.

31.18 (xxvi) Supply and erection of hexagonal M.S. box 1.60 mm thick having each side 8 cms , 7.5 cms deep top covered with M.S. lid by means of screws including 10 mm dia 30 cm long mild steel rod made into suitable suspension hook and erected in RCC slab for erection of fan , the bottom covered with 3 mm thick bakelite sheet with suitable holes , painting etc. complete with all labour and material required to complete the job

(P) Pipe Laying 31.21 Supply and erection of pipe for wiring purposes including bends inspection boxes etc. where necessary and painting as required

31.21 (xxi) Heavy gauge welded conduit pipe 20 mm dia 1.60 mm thickness flushed

31.21 (xxii) Heavy gauge welded conduit pipe 25 mm dia 1.60 mm thickness flushed

31.22 (Q) Earthing

31.22(i) Earthing with GI earth pipe 4.5 m long and 40 mm dia with masonry enclosure on the top etc. as required

31.22(ii) Extra for using salt and charcoal / coke for pipe earth electrode as required

31.22(xii) Pdg. and laying earth connections from earth electrode with 4.00 mm dia G.I. wire in 15 mm dia G.I. pipe from earth electrode as required

31.22(xvi) Pdg. and fixing 4.00 mm dia G.I.wire on surface or in recess for loop earthing as required

31.26 Supply and erection of under ground cable ,loose in existing pipe or trenches complete with necessary connections

31.26 (xxv) Ard. 25 Sq. mm 3.5 Core Cable

31.26 (xxxix) Ard. 10 Sq. mm 4 Core Cable

31.26 (xI) Ard. 16 Sq. mm 4 Core Cable

31.36 PVC insulated wiring in recessed conduit wiring in 1.5 sqmm PVC insulated copper conductor cable in 1.6 mm thick conduit pipe.

( I ) Fan Point

( b) Medium Point.

( b) Long Point

( II ) Light Point-

(a) Short Point

( b) Medium Point

( c) Long Point.

( VI ) Call bell point including M.S. Box of size 180 mm x 100 mm x 60 mm deep for call bell.

( c) Long Point

( VII ) 3-Pin 5 Amp. plug point including earthing the 3rd Pin etc.

(b) Medium Point

(c) Long Point

( VIII ) 3-Pin 15 Amp. plug point with 4 Sqmm PVC insulated copper conductor cable including earthing the 3rd Pin etc.

(c) Long Point

31.30 Street Light.

31.30 (IV) Supply and erection of weather proof M.S.Box of size 20 cm x 15 cm x 10 cm. covered with 3.00 mm thick M.S.sheet hinged cover, locking arrangemrnt , housed in wall , including the cost of 1 no. 16 Amp.. 415 volts kit-kat and 2 nos. 63 Amp.. 415 volts neutral links fixed on hard wood board in the M.S.Box including painting and necessary connections .

31.40 Supply & erection of PVC unsheathed copper conductor cbale single core 1100 volts grdae in pipe of suitable size excluding cost and erection of pipe.

31.40 (i) Cable size 1.5 Sqmm ( 3/0.81 mm ).

31.40 (iii) Cable size 4 Sqmm ( 7/0.85 mm ).

31.40 (v) Size 10 sqmm ( 7/1.35 )

31.41 Supply & erection of double door sheet steel enclosure distribution board suitable for MCBs and ELCBs etc. recessed in wall including bonding to earth with all labour and material required to complete the job in all respect upto the entire satisfaction of the Engineer-in-charge of the work.

31.41 (v) 4-way , TP&N ( Horizontal) (8+12)

31.44 Supply and erection of PVC pipe ISI marked ( Medium ) recessed in wall / ceiling etc. including the cost of PVC bends , inspection boxes , iron hooks and cement concrete etc. complete in all respect upto the entire satisfaction of Engineer-in-charge of work.

31.44 (ii) 25 mm dia.

31.48 Supply and erection of MS Saddle and clamps duly galvanised , on wall / RCC parapit for fixing underground cable at a distance of 0.60 metre center to center fixed by means of rawl plug including the cost of all labour and material required to complete the job in all respect and upto entire satisfaction of the Engineer-in-charge of work.

31.51 Supply and erection of MS stand made of 50mmx50mmx6mm angle iron frame and 150cm long, 30cm wide with MS sheet covering size 30cmx30cm 3.15mm thick fixed on the top of board & legs duly embedded in 1:2:4 cement concrete block 30cm below ground level including the cost of cement sand, welding, painting & fabrication charges etc. up to the entire satisfaction of Engineer - in - charge of the work.

31.55 Supply and erection of socket size rotary step type electronic regulator for A.C. Ceiling fan Anchor Make Deluxe Model No. 50440 ISI / SSK make PC 561 operated on 120 /280 Volt A.C. Supply complete including cutting of existing bakelite sheet and making necessary connection etc. upto the entire satisfaction of Engineer-in-charge of work.

31.67 Supply and erection of mark double walled corrugated (DWC) HDPE pipe laid 1Mtr. Below ground level including diging and refilling of earth including cost of sutiable size socket/cuppler for HDPE pipe including the cost of labour and material required to complete the job in all respect upto the entire satisfaction of Engineer-in-Charge of the work.

(i) HDPE pipe 63/50 mm outer dia/inner dia.

31.68 Supply and Erection of Hot Dip Galvanized octagonal pole of 3 mm thickness, with base plate including cost of nut and bolts and all accessories as supplied by the manufacture including cost of foundation accessories etc. The foundation bolts as per manufacturer design should be hot dipped galvanized pole complete with door locking arrangement, Terminal plate consisting of 2 nos. 100 Amp.., 4 pole neutral links including connection etc. with suitable connecting arrangements for 2 No. MCB's / Kit-Kat including cost of R.C.C 1:1, 5:3 for foundation of size 0.7 M x 0.7 M x 1.8 M with minium 8 Nos. 12 mm dia longitudinal MS reinforcement rods with rings of 8 mm dia not more than 200 mm C.C for fixing the pole with all labour and material required to complete the job in all respect upto the entire satisfaction of Engineer in Charge of the work.

(i) 7 Mtr. Long pole with top dia 70 mm and bottom dia 130 mm with base plate of size 220 mm x 225 mm x 12 mm.

M.R. items NS-1 Supply & erection of M.S. Box made of size d 8" x 10" x 4" (20cm x 25cm) and 10cm deep made one of 1.6mm thick MS covered with 5 mm thick bakelite sheet for fixing of 4 Nos. socket ans switch of 6 Amp. and one no. socket and switch of 15 amp. including fixing of one no. fuse unit and indicator of approved make. The MS box is recessed in wall including cost of necessary cement sand and mixture required to complete the job in all respect with cost of necessary labour charges for fixing the bakelite sheet and complete the job in all respect upto the entire satisfaciton of Engineer-in-charge of the work.

N.S - 2 Supply & erection of double door (Indo Asian / Havells / standard make) sheet steel enclosure distribution board (Suitable for MCCB as incomer and MCB for out going circuit but with out cost of MCCB / MCB etc. The distribution board duly recessed in wall / surface mounting necessary connections with all labour & material required to complete the job in all respect up to entire satisfaction of Engineer-in-charge of the work. i) 4 way

N.S - 3 Supply & Erection of LED flood light fitting of Havells make JETAIRISFLS 100W LED 757ASYMLTG or its equivalent make & specifications of Wipro / Philips / HPL / C&S Electric with pressure die cast alluminium housing, reflector and enclosed with toughened glass with all accessories as supplied by the manufacturer complete in all respect upto the entire satisfaction of Engineer-in-Charge of the work.

N.S - 4 S/E of AC ceiling fan 1400 mm sweep ISI mark Orient,Usha,Bajaj make complete in all respect upto entire satisfaction of Engineer-in-Charge of the work.

N.S - 5 S/E of Exhaust Fan 300 mm ISI mark Orient,Usha,Bajaj make with louver/Shutter with all accessories as supplied by the manufacture including cost of all labour material required to complete the job in all respect upto entire satisfaction of Engineer-in-Charge of the work.

N.S - 6 Supply and Erection of LED Tube Light 20 watt model of Philips, Havells, Bajaj / HPL / C&S Electric etc. Complete in all respect up to the entire -satisfaction of Engineer-In-Charge of work.

N.S - 7 Supply and Erection of Led Tube Light 36 watt model of Phillips, Havells, Bajaj / HPL / C&S Electric etc. Complete in all respect up to the entire -satisfaction of Engineer-In-Charge of work.

N.S - 8 Supply and Erection of LED street light fitting Havells make ENDURA PEARL PLUSSSL 60W LED 757 SASYYOPC make or its equivalent make & specifications Wipro/Philips/HPL/C&S Electric with pressure dia cast aluminium housing, IP-66 reflector and enclosed with toughened glass with all accessories as supplied by the manufacture including cost of all labour and material required to complete the job in all respect upto the entire satisfaction of Engineer-in-charge of the work

N.S - 9 Supply & Erection of single arm bracket made of 40mm dia Gl pipe B class lSl 1.25mtr. Long with coller pipe (Gl) 75mm dia 60 cm Long top covered with ornamental cap duly welded painted 2 coats of aluminum paints on bracket and golden paint of ornamental cap including the cost of labour and petty material etc. complete in all respect up to the entire satisfaction of Engineer-in charge of the work.