Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹7.9 LAccepted-AOC 158 A 2 9 DR RAJARATHINAM STREET KATTOOR COIMBATORE 641 009 TN | COIMBATORE | COIMBATORE | TAMIL NADU | 641009 | L1 | Accepted-AOC beingL1 | |
| 2 | L2₹8.2 L+₹9,173 (1.14%)Rejected-Finance | L2 | Rejected-Finance quoted amount is higher than 1st lowest | |
| 3 | L3₹8.2 L+₹16,203 (2.01%)Rejected-Finance 18 KUSHAL LAYOUT 1ST CROSS KAGGADASAPURA CV RAMAN NAGAR POST BENGALURU 560093 | BENGALURU | BENGALURU URBAN | KARNATAKA | 560093 | L3 | Rejected-Finance quoted amount is higher than 1st lowest | |
| 4 | L4₹8.3 L+₹20,443 (2.53%)Rejected-Finance E 37 CWE AF SOUTH BANGALORE A I A II B I | BENGALURU URBAN | KARNATAKA | 560001 | L4 | Rejected-Finance quoted amount is higher than 1st lowest | |
| 5 | L5₹9.5 L+₹1.4 L (17.7%)Rejected-Finance 1 181 KAMATCHI AMMAN KOVIL STREET KANNAN COLONY CHINTHAMANI MADURAI 625009 | MADURAI | MADURAI | TAMIL NADU | 625009 | L5 | Rejected-Finance quoted amount is higher than 1st lowest |
| Sl No | Description | Qty | Unit | POOJA ENGINEERING L1 | SEMBA ELECTRICALS L4 | TECKXPERT ENTERPRISES L3 | Hydro Therm Engineers L2 | R K BUILDERS L5 |
|---|---|---|---|---|---|---|---|---|
| 1.00 | M&L for servicing / greasing of bearings and cleaning to squirrel cage induction type motor of capacity upto 5/7.5 HP, 3 phase 415V, cleaning, varnishing, heating and drying re-erecting, aligning with the pump, testing, including replacement of gland packings, painting the motor with two coats of synthetic enamel paint after preparing the surfaces and split cauge centrifugal pump set including disconnect/reconnect the suction and delivery line of any size with replcement of suction/deliverry rubber gaskets by dismantling of motor from the pump set removing the stator/rotor separately, cleaning, and graseing pump and motor the bearings (long life grease) including replacement of bearing, minor parts such as nuts & bolts, washers, stud, O ring, coupling, locking key, air vent valve etc re erecting along with pump with proper allingnment in common base frame with sprit level, and laminated packing sheets in any situation, testing, complete all as directed by Engineer-in-charge. | 2 | Each Job | 1,635 ₹3,270 | 1,480 ₹2,960 Lowest | 1,560 ₹3,120 | 1,500 ₹3,000 | 2,070 ₹4,140 |
| 2.00 | All as per item No 01 here - in - before but Electric motor/pump set of 10/12.5/14 HP Capacity. | 2 | Each Job | 2,000 ₹4,000 | 1,900 ₹3,800 | 1,700 ₹3,400 Lowest | 1,750 ₹3,500 | 4,950 ₹9,900 |
| 3.00 | All as per item No 01 here - in - before but Electric motor/pump set of 30 HP Capacity. | 2 | Each Job | 4,660 ₹9,320 | 5,200 ₹10,400 | 4,400 ₹8,800 Lowest | 4,500 ₹9,000 | 5,900 ₹11,800 |
| 4.00 | All as per item No 01 here - in - before but Electric motor/pump set of 50 HP Capacity. | 1 | Each Job | 7,500 ₹7,500 | 6,500 ₹6,500 Lowest | 7,500 ₹7,500 | 7,100 ₹7,100 | 9,800 ₹9,800 |
| 5.00 | M&L for repairing/overhauling of split cage centrifugal pump set of capacity upto 5/7.5 HP, 3 Phase, 415 Volts, coupled with motor by replacing of unserviceable parts like bearings, sleeves bushes, housing, shaft with gunmetal impeller including transporting to workshop & back and lath work for filling and grinding of shaft etc assembling the pump with new packing materials, nuts and bolts, washers, greasing and checking the alignment disconnect/connecting up with delivery, suction pipes testing of pump set after complete the work all as directed and specified by Engr - in - charge. Note :- (i) All spares suitable to existing pump set. | 3 | Job | 2,300 ₹6,900 Lowest | 2,600 ₹7,800 | 2,450 ₹7,350 | 2,300 ₹6,900 Lowest | 4,100 ₹12,300 |
| 6.00 | All as per item No 05 here - in - before but Pump set of 10/12.5 HP Capacity. | 1 | Job | 2,800 ₹2,800 | 2,720 ₹2,720 | 2,700 ₹2,700 | 2,550 ₹2,550 Lowest | 4,500 ₹4,500 |
| 7.00 | All as per item No 05 here - in - before but Pump set of 14 HP Capacity. | 1 | Job | 2,980 ₹2,980 | 3,500 ₹3,500 | 2,880 ₹2,880 | 2,800 ₹2,800 Lowest | 5,100 ₹5,100 |
| 8.00 | All as per item No 05 here - in - before but Pump set of 30 HP Capacity. | 2 | Job | 5,350 ₹10,700 | 6,000 ₹12,000 | 4,700 ₹9,400 Lowest | 5,000 ₹10,000 | 6,100 ₹12,200 |
| 9.00 | All as per item No 05 here - in - before but Pump set of 50 Capacity. | 1 | Job | 6,200 ₹6,200 | 7,500 ₹7,500 | 7,000 ₹7,000 | 6,000 ₹6,000 Lowest | 9,000 ₹9,000 |
| 10.00 | M&L for disconnect / reconnect the electrical connection and uncoupling from pump and dismantling from common base frame and opening of stater and rotor removing the burnt wiring and rewinding of the induction motor of capacity 5/7.5 HP, 3 Phase, 415 Volts with suitable size of supper enameled copper winding wire of existing gauge and insulating materials and sleeves, varnishing the winding, drying, replacement of terminal plate re assambled/installed in common base frame testing the motor with existing pump set including transportation to workshop & back all as directed by Engr -in - charge. Note : (i) The contractor will be provide standby Pump & motor set during repair work. (ii) The quoted rate deemed to be including rate of standy Pump & motor set. | 1 | Job | 6,750 ₹6,750 | 6,500 ₹6,500 | 6,800 ₹6,800 | 6,250 ₹6,250 Lowest | 8,650 ₹8,650 |
Tender Value
Refer Docs
EMD Value
₹18,000
Closing Date
30 Jun 2026, 6:00 pmClosed
AGE I AF coimbatore
AGE I AF COIMBATORE AFAC COMPLEX KAMARAJAR ROAD RED FIELD POST COIMBATORE PIN -641018
MAINTENANCE AND REPAIRS TO PUMPS MOTORS BOREWELL PUMPS ELECTRICAL CONTROL PANELS STARTER WATER LEVEL INDICATORS AND ESSENTIAL REPAIRS TO WATER SUPPLY INSTALLATIONS COMPREHENSIVE MAINTENANCE OF RO PLANT Domestic and tech area of AFAC
2026_MES_770716_1
8189_E8
Open Tender
Electrical and Maintenance Works
Item Rate
270 days
Coimbatore
Class-E category-b (i)(see NIT for detail)
8 documents required · 8 mandatory
₹500
AGE I AF Coimbatore
₹18,000
Yes
17 Aug 2026
9 Jun 2026
3 Jul 2026
9 Jun 2026
30 Jun 2026
23 Jun 2026
9 Jun 2026 - 20 Jun 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | M&L for servicing / greasing of bearings and cleaning to squirrel cage induction type motor of capacity upto 5/7.5 HP, 3 phase 415V, cleaning, varnishing, heating and drying re-erecting, aligning with the pump, testing, including replacement of gland packings, painting the motor with two coats of synthetic enamel paint after preparing the surfaces and split cauge centrifugal pump set including disconnect/reconnect the suction and delivery line of any size with replcement of suction/deliverry rubber gaskets by dismantling of motor from the pump set removing the stator/rotor separately, cleaning, and graseing pump and motor the bearings (long life grease) including replacement of bearing, minor parts such as nuts & bolts, washers, stud, O ring, coupling, locking key, air vent valve etc re erecting along with pump with proper allingnment in common base frame with sprit level, and laminated packing sheets in any situation, testing, complete all as directed by Engineer-in-charge. | 2 | Each Job | - | - |
| - | All as per item No 01 here - in - before but Electric motor/pump set of 10/12.5/14 HP Capacity. | 2 | Each Job | - | - |
| - | All as per item No 01 here - in - before but Electric motor/pump set of 30 HP Capacity. | 2 | Each Job | - | - |
| - | All as per item No 01 here - in - before but Electric motor/pump set of 50 HP Capacity. | 1 | Each Job | - | - |
| - | M&L for repairing/overhauling of split cage centrifugal pump set of capacity upto 5/7.5 HP, 3 Phase, 415 Volts, coupled with motor by replacing of unserviceable parts like bearings, sleeves bushes, housing, shaft with gunmetal impeller including transporting to workshop & back and lath work for filling and grinding of shaft etc assembling the pump with new packing materials, nuts and bolts, washers, greasing and checking the alignment disconnect/connecting up with delivery, suction pipes testing of pump set after complete the work all as directed and specified by Engr - in - charge. Note :- (i) All spares suitable to existing pump set. | 3 | Job | - | - |
| - | All as per item No 05 here - in - before but Pump set of 10/12.5 HP Capacity. | 1 | Job | - | - |
| - | All as per item No 05 here - in - before but Pump set of 14 HP Capacity. | 1 | Job | - | - |
| - | All as per item No 05 here - in - before but Pump set of 30 HP Capacity. | 2 | Job | - | - |
| - | All as per item No 05 here - in - before but Pump set of 50 Capacity. | 1 | Job | - | - |
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.21 MB
BOQ_863096.xls
BOQ • 0.35 MB
General_pages_.pdf
Tender Documents • 0.56 MB
PS_.pdf
Tender Documents • 0.09 MB
credit_exc.pdf
Tender Documents • 0.09 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .