Repairs to brick work, joinery, painting, plumbing, flooring and other misc repairs in Offrs Md accn under AGE B/R-II, GE Gurdaspur.

Amount

Taking down chowkats with shutter n.exc 1.50 Sqm each (without taking off shutter for the chowkats and removing to store complete all as specified and directed.

All as per Srl item No 2 above but exc 1.50 sqm but n.exc 4.00 Sqm.

Taking down shutter of any description exc 1.00 Sqm but n.exc 2.00 Sqm complete all as specified and directed.

Dismantling floor hearth or wall tilling including cement mortar bedding removing serviceable tile to store and rubbish off premises complete all as specified and directed.

M& L Non skid dark coloured ceramic tiles 7 to 8 mm thick joint free (square/rectangular) area of each tile exceeding 0.11 sqm but not exc 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white cement or clolured cement to match including 15 mm thick screed bed in cm 1:6 complete all as specified and directed.

M&L for ceramic glazed dark shed coloured tiles of size 300x200x7 mm thick joint free on and incl 10mm thick screed/ rendering in CM (1:4) set and jointed in neat cement slurry and pointed in colored cement mixed with pigment to match the colour of tiles on vertical surfaces of well as in skirting/dado complete all as specified and directed.

M&L vitrified tiles light shade 10mm thick (square/ rectangular) polished area of each tiles not exceeding 0.36 sqm in floor etc set and jointed in neat cement slurry and pointed in white cement or coloured ceemnt to match including 15mm thick screed bed in CM 1:6 complete all as specified and directed.

Demolition of cement concrete (unreinforcement) of any description and in any position not otherwise, specifically provided for including sunken floor, disposal of debris and rubbish, unserviceable materials etc. to a distance not exc. 100m distance complete all as specified and directed.

M&L plaster 15mm thick in cm 1:4 in sunken portion of slab with using waterproofing compound complete all as specified and directed. Note : WPC shall be measured and paid separately.

Material only integral water proofing compound.

S&F 3 mm thick reinforced with polyster non wove fabric APP modified membrane of weight not less than 3.0 Kg/Sqm torch shield using gas burner including minimum 100 mm side laps and 150mm end lap including bitumen primer @ 0.3 Kg / Sqm in sunken portion complete all as specified and directed by Engineer-in-Charge.

M&L for PCC 1:5:10 type E-2 using 40 mm stone aggregate as in filling, foundation and mass concrete, in sunken floor complete all as specified and directed.

M&L 25 mm thick cement concrete 1:2:4 type B-0 (using 12.5mm graded stone aggregate) as in sub base for receiving the floor finishes complete all as specified and directed.

Taking down cement plaster of any description on brick walls etc including raking out joints, hacking for key scrubbing down with water and removal of rubbish off the premises where directed complete all as specified and directed.

M&L 15mm thick cement plastering in cm 1:6 on brick or concrete surfaces other than fair surface, finished the surfaces even and smooth without using extra cement complete all as specified and directed.

All as per item No 16 above but 10mm thick on ceiling in CM 1:3.

M&L 15mm thick cement plastering on fair faces in CM 1:4 on brick or concrete surfaces fair finished the surfaces even and fair using water proofing compound complete all as specified upto height 12 mtr complete all as specified and directed. Note : Note : WPC shall be measured and paid separately.

M&L preparation of new plaster surface and applying two coats of cement base paint complete all as specified and directed.

M&L preparation of new plaster surface of ceiling and applying three coats of white wash complete all as specified and directed.

Preparation of new plastered surfaces and applying two coats of oil bound distemper (of approved shade) on walls over a coat of primer on plastered surfaces complete all as specified.

M&L for preparation of old surfaces of existing treatment and applied one coat of cement base paint complete all as specified and directed.

M&L preparing old plastered or unplastered surfaces of walls and applying one coat of white wash complete all as specified and directed.

M&L preparing old plastered or unplastered surfaces of ceiling and applying one coat of white wash complete all as specified and directed.

M&L preparing old plastered or unplastered surfaces of walls including cornices and applying one coat of distemper oil emulsion paint, white or tinted complete all as specified and directed.

M&L for preparing old decorated plastered surface by complete removal existing treatment and applying two coats of OBD over a coat of primer over 1mm thick wall care putty to make surface smooth complete all as specified and directed.

M&L for preparation of new wooden surface exc 10cm width or girth and applying two coat of synthetic enamel paint over one coat of pink primer complete all as specified and directed.

M&L for preparation of new steel surface exc 10cm width or girth and applying two coat of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed.

M&L prepartion of old painted surface of wood & wood based surfces of any decsription not other wise described over 10cm width or girth and apply one coat of synthetic enamel paint complete all as specified and directed.

All as per Srl item No 29 above but on steel / iron surfaces.

S&F pressed steel frames of size 105 X 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike, plate etc and filling of chowkats with PCC 1:3:6 type C-1 (using 20mm graded stone aggregates) and tarring and sanding to inner surface (surface in contact with concrete/brick surface) of chowkats and painting two coats of synthetic enamel paint over primering with red oxide zinc chrome to outer surface after prepration of surfaces complete all as specified and directed.

S&F MS Framed work, chowkats as in doors or gates of angle or other section with gusset plates, rails,braces, etc., and similar work incl primer conforming to Fe 290 (Gde - E-165) complete all as specified and directed.

S&F pressed frames of size 125 x 60 mm for doors with one or more rebate including necessary fixing lugs, hings, lock strike, plate etc and filling of chowkats with PCC 1:3:c type C-1 (using 20 mm graded stone aggregates ) and tarring and sanding to inner surafce (surface in contact with concrete/brick surface) of chowkats and painting two coats of synthetic enamel paint over priming with red oxide zinc chrome to outer surface after preparation of surfaces complete all as specified & directed.

S&F 30mm thick factory made solid panel PVC door shutter 30mm thick (Style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rails, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail. Paneling of plain colour PVC sheet to e fitted in the MS frame welded/ sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement, complete all as specified and directed.

S&F glazed and skeleton shutters 35mm thick of 2nd class hard wood open rebated and prepared to receive gauge & glass etc with edge of sash bar and number edges of framing plain chamfered beads for securing glass etc size of number of shutters as spd SSR Part-I & section 8 clause 8.24 (a) complete all as spd

S&F flush shutters 35 mm thick soild core construction with board core and plywood face panels commercial type on both sides

S & F solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforeced with MS square tube complete all as specified & directed by Engineer-in-charge

M&L in repair veneered particle boards interior grade size 18/19mmm thick,solid core ,general purpose types ,with faces veeners of type 'BB' fixed with screws to timber frame work for shelf all as specified & directed.

M&L in repair veneered particle board exterior grade size 18/19mmm thick,solid core ,general purpose types ,with faces veeners of type 'BB' fixed with screws to timber frame work all as specified & directed.

S & F magnet catch of approved quality, 75 mm size complete all as specified & directed.

S & F continous (piano) hinges, mild steel ,bright finish or electro galvanised complete all as specified 7 directed,width of flaps (when open)40 mm

S & F in repair of steel telescopic channels, rollers for smooth sliding of drawers complete all asw specified & directed.

S& F in repair knobs 40 mm dia, cup board knobs of mild steel fixed with nut ,screw and washer, bright finish complete all as specified & directed.

S & F in repair 150 mm Hasp and staple, safety type,brass with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified & directed.

S&F Aluminium anodized barel tower bolt of extruded section 150mm long

All as per Srl item No 45 above but 250mm long

S&F aluminium alloyed handle cast type anodized of size 100mm long

All as per Srl item No 47 above but 150mm long

S&F but hinge med weight cold rolled mild steel 100mm size

S&F 300mm, mild steel ordinary rat tail rod pattern springs, including roller and roller plate complete. Note : Repair required on steel door frame, welding to be carried out or necessary alternative arrangements to be done.

S&F 300mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete

Hacking out old broken glass (any thickness, size, quality or description) from wooden/steel frame, glazed with putty and fixed with beads.

S&F sheet glass 3mm thick ordinary quality , fixed with oil putty in square n exe 0.5sq m in each pane.

S&F Figured glass pin head type glazing with oil puty glass 3mm thick , fixed with oil puty in square n exe 0.5sq m in each pane.

S&F sheet glass 4mm thick ordinary quality, in squares exceeding 0.50 sqm in each pane fixed with oil putty

S & F in repair door stooper of aluminium alloy body and tongue, anopdise with hard drawn steel spring fixed to doors shutter of overall length of cover plate 140mm.

Taking down old existing window and S&F steel window box type made of ERW tube hollow P section of size 60mmX 25mm outer frame double rebated comprising double shutters i.e. guaged skelton & glazed, shutter frame of ERW tube P section size 50mmX20mm with two openable leaf for each shutter consisting two Nos sash bars of T-section 20mmX3mm welded to frame with one vertical mullion of ERW box type T-section of size 60mmX25mm and FI 2mm thick welded/ screwed to frame for fixing of wire gauge including MS guard bars, fittings and fixtures welded to frame/ shutters as given below and all as shown on drg No. CEJZ/TD-1020/08 Sh 1/3 to 3/3 complete: :- (i) Hold fast,150mm long of flat iron 12mmX3mm- 04Nos per window (ii) Handle of Z section 20mmX25mm,100mm long-01Nos per leaf (iii) MS Tower bolt 150mm long-02 Nos per leaf (iv) Z section 20mmX25mm,100mm long stopper -01 Nos per leaf (v) Cleat 55mm long of hollow square 15mmX12mm -02 Nos per leaf (vi) MS pintol hinges size 75mmx12mm- 2 Nos. per leaf (vii) Making good dismantled portion in PCC 1:2:4 type B-1 for hold fasts (four Nos for each window). (viii) Two coat of synthetic enamel paint over one coat of red oxide primer on steel surfaces. Note: Wire cloth, glass shall be measured and paid for separately

Taking down old existing window/ ventilator and S&F steel window/ ventilator box type, made of ERW tube hollow P section of size 60mmX25mm outer frame (single rebated), fixed/ skelton single shutter frame of ERW tube P section and sash bars including MS guard bars, fittings and fixtures welded to frame/ shutters all as shown on drg No. CEJZ/TD-1019/08 Sh 1/3 to 3/3 including Making good dismantled portion in PCC 1:2:4 type B-1 for hold fasts, Two coat of synthetic enamel paint over one coat of red oxide primer on steel surfaces complete all as specified and directed. Note: Glass/ wire cloth shall be measured and paid for separately

S&F galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18mm fixed with tinned tacks complete all as spd.

S&F in repair galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18mm fixed with tinned tacks including making exisiting fitting good all as spd.

Taking up and down GI pipe15mm bore including fittings, connection, all as spd.

All as per Srl item No 61 above but 20mm bore of pipe

S&F GI tubing 15mm bore medium grade, fixed to wall/ceiling or floor etc with all fittings ISI marked all as spd

All as per Srl item No 63 above but fixing only (old serviceable pipe re-used) including cleaning.

S&F GI tubing 20mm bore medium grade, fixed to wall/ceiling or floor etc with all fittings ISI marked all as spd

All as per Srl item No 64 above but fixing only (old serviceable pipe re-used) including cleaning.

S&F rotational moulded polyethylene 3 layer water storage tank of 500 ltr capacity (cylindrical vertical with closed top) hoisted and fixed in position including dismantling of old unserviceable all as specified and directed.

Supply & fix rotational moulded polyethylene 3-layer water storage tanks 1000 ltr capacity (cylindrical vertical with closed top) hoisted and fixed in postition including dismentling of old unsv all as specified and directed by Engr-in-Charge.

S&F in repair bib taps 15mm dia chromium plated fancy type with capstan head screwed down screwed for iron pipe or for brass ferrule and fixed in repairs all as specified and directed.

S& F in repair PVC cabinet with mirror, size 350 x 450 mm with shelves of best quality including fixing arrangements ,complete all as specified and directed.

S& F in repair glass shelf assembly 60 cm in oval shape consisting 8mm to 10 mm thick glass including CP guard railing with double rail, complete all as specified and directed.

S&F in repair for 15mm bore angle Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handles, screwed both ends for iron pipe or for unions, fancy type, chromium plated with long shank and cup ( concealed type) and fixed

S&F in repair stop value 20mm bore cast copper alloy with butterfly handle screwed down for high pressure, screed on bath ends, fixed with iron pipe etc all as spd

S&F in repair cast copper alloy CP shower rose 125mm size with swivel joint fancy type as spd

S & F in repair cast copper alloy single hand shower with 1.5 m flexible tube & hook complete all as specified and directed.

S&F 20 mm float ball brass valve high pressure with epoxy coated Aluminium rod & high-density plastic ball screwed for iron pipe and fixed. (make Prayag/ polytuff)

S&F in repair 20 mm float ball brass valve high pressure with epoxy coated Aluminium rod & high-density plastic ball screwed for iron pipe and fixed. (make Prayag/ polytuff)

S & F in repair brass CP mixer 15 mm bore, for mixing hot & cold water, screwed down for iron pipe and fixed complete all as specified & directed.

S&F in repair CP brass towel rail `D’ type 60 Cm long fixed to wall all as spd and directed by Engr-in-Charge

S&F 110mm bore PVC (SWR) ISI marked pipes single socketed in any length with rubber ring joints fixed to wall or floor all as specified and directed.

S&F 75mm bore PVC (SWR) ISI marked pipes single socketed in any length with rubber ring joint fixed to walls or floor complete all as specified.

Dismantling of cast iron ,PVC or SGSW drain pipes, jointed in cement mortar and taking out of trenches , if required

S&F in repair vitreous china squatting pan “Orrisa Pattern” white of size 580x440mm with internal foot rest with PVC 'P’ or 'S’ trap, integral foot rest including connection to trap and flushing pipe etc complete and bedding in PCC 1:7:12 type F-2 complete all as specified

S&F in repair for Vitreous China wash down water closet pan (pedestal pattern) white (EWC) including plastic water closet seat white with jet, closed pattern with flat botton and cover and mild steel chromium plated or aluminized hinging device complete all as specified and directed.

S&F in repairs plastic water closet seat black closed pattern with flat bottom cover and mild steel chromium plated or aluminized hinging device all as specified and directed.

S&F in repair health faucet (ABS Body) mild steel chromium plated suitable for 15mm dia pipe with 1.25 metere long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed.

S&F in repair 10 litres capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and 32 mm bore PVC flush pipe etc. all as spd.

S&F in repair Flush pipe of polythylene of low or high density or PVC,32mm dia for low level cistern.

S&F in repair Vitreous china wash basin,white flat back,size 630x450mm excluding taps,waste,chain and plug and porcelain stopper but including brackets.

S&F in repair Pillar taps, cast copper alloy but fancy type, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed.

S&F in repair Waste coupling of brass CP (half or full threaded), bore/ dia of discharge pipe 32mm.

S&F in repair PVC waste pipe 32mm dia 600 to 750mm long fixed to wash fitting of wash basin/ urinal all as specified and directed.

S & F in repair PVC connections 15 mm size with PTMT nuts of length 600 mm

S&F in repair PVC (SWR ) bends 110 mm bore any radius

S&F in repair PVC (SWR ) bends 75 mm bore any radius

S&F in repair PVC (SWR )single junction ( single T ) 110 mm bore equal or unequal

All as per Srl item No 97 above but 75 mm bore

S&F in repair PVC (SWR ) vent cowl 110 mm bore.

All as per Srl item No 99 above but 75 mm bore.

M&L in repair PVC (SWR ) floor trap 100/75 mm plain with grating incl. jointing with solvent cement.

S & F in repair Stack clamps (100 mm pipe) out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof.

All as per Srl item No 102 but 75 mm bore.

Supply and fixing in repair cutrain rod 20mm dia of anodised aluminium alloys with fixing brackets, stops, rollers etc fixed to wall with screws, PVC plug complete all as specified and directed.

S&F in repair stainless steel plate rack of size 600mm x 900mm x 250mm width made out of 1 mm thick steel sheet including fixing arrangement complete all as specified and directed.

Cutting down plants/shrubs of girth not exc 15cm from roof tops/ sides of external walls of building ,chajjas, wall, junction etc. Including taking out penetrated roots in to yhe wall, slab surfaces, shafts and aapplying "STUFALO" solution (harbal medicine) as per manufacturer's instructions in and around the surfaces and making good the location with PCC (1:2:4) and cement mortar (1:2) including necessary scaffolding as per site requirement all as specified and directed.

S&F in repair kitchen sinks with drainage board made of stainless steel 1 mm thick with plugs, washers, coupling and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm including fittings arrangement complete all as specified and directed

S&F in repairs Mortice lock, vertical type size 100mm 4 levers Mild steel .

S&F in repair Aluminium (die cast) body door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed

S&F in repair 150mm floor door stopper of aluminimum alloy body and tongue anodized with hard drawn steel spring

M & L coloured Chequered cement concrete tiles with grey cement and pigment , 30cm x 30cm x 25mm thick,set, jointed and pointed in neat cement slurry in floors in floors over and including 15 mm thick screed bed in cement mortar 1:6 & PCC 1:4:8 type D-2 (using 40 mm graded stone aggregate ),75 mm thick, as in sub base of floor finishing even & fair complete all as specified and directed.

M&L for 40 mm thick PCC 1:2:4 type B-1 using 20mm graded stone aggregate, as in under layer in flooring, finishing fair & even complete all as specified.

M&L Cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate as in coping, benching, apex stone, bed plate, kneelers including weathering, slightly rounded or chamfered angles and throating including form workcomplete all as specified.

Demolition of cement concrete in ground floor & paving n.exc 15cm above ground level

M&L for cement cocnrete type B-1 (1:2:4) (20mm graded aggregate) as in plinth protection thickness of 50mm finished even and smooth without using extra cement.

Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc.,repairs to minor crack repair ,stopping leaking and inlet/outlet with ,disinfecting the tank surfaces by suitable methods including writing with paint cleaning date on tank complete all as specified & directed of following size exc 250 ltrs but n.exc. 500 ltrs capacity

All as per Srl item No 116 above but size exc. 500 ltrs but n. exc. 1000 ltrs capacity.

Note: A Schedule of Credit for old/unserviceable demolished/dismantled items has been catered for in the tender. The Schedule of Credit is pre-priced by MES. The final amount of the tender shall be arrived at after deducting the total amount of Schedule of Credit from the total amount of BoQ as per General Summary sheet catered for after Schedule of Credit.

MALKIT SINGH AND SONS

AVTAR SINGH RAJU

DEEPAK AND CO

KAILASH CONSTRUCTION CO

multani construction co

JOGRAJ CONSTRUCTION COMPANY

M/s SODHI SALES CORPORATION

VOHRA CONSTRUCTION CO