REPAIR/MAINT OF VARIOUS TYPE OF PUMP MOTOR AND CONNECTED WORK, ANNUAL MAINT OF LIFT AT MH AT NEW CANTT AND LIFT CENTRAL AC PACKAGE TYPE OF DAD AREA AT NEW CANTT ALLAHABAD

Amount

Supply and installation commissioning and testing water electro chlorinator plant (on site sodium hypoclrite generator) model PBP-200p250 gm/hrs having hypochlorite strength 7-8 GPL capable to produce 280 ltr Naocl per batch consuming 9 Kg salt and 300 liters water complete with all accessories including complete maintenance for one year free of cost. Make Prisine, comprising of following material specification :- (a) Anode : Titanium as per ASTM B 265 & 348 Gr. 1 & 2. (b) Cathode : Titanium as per ASTM B 265 & 348 Gr.1&2. (c) Coating on Anode : Platinum group of metal oxides like, Ruthenium and Iridium MMO coated DSA. (d) Control Module : Electronic SMPS type power supply provided with electronic timer with auto stop after 8 hours. Ammeter and volt meter provided. Copper cable is provided between the module and electrolyzer.

Taking out centrifugal pump incl. electric motor 3 to 5 HP ,3 phase ,415 Volts after ,disconnecting the electric connection. Dismantling the motor .Cutting the burnt winding and cleaning the slots with non greasy materials and rewinding with super enameled copper wire (Gauge of copper is to match the existing size) with insulating material, varnishing complete. Reassembling the motor, repair and overhauling of pumps, replacement of bearing, grinding , polishing of impeller, neck ring ,greasing complete all as directed , and making electric connection and testing complete to entire satisfaction of Engr-in-charge

Taking out air compressor incl. electric motor 10 HP 3 Phase 415 V installed at STP disconnecting electric connection and dismantling motor, cutting burnt winding and cleaning slots with non greasy chemical and rewinding with super enameled copper wire of existing gauge incl. insulating material, varnishing complete and repair of compressor by dismantling, grinding, polishing of cylinders, pistons, replacement of piston rings, bearings incl. replacement of compressor oil 5 Ltr , complete all as specified & directed by engineer- in- charge

S&F 100mm bore sluice valve, heavy duty both ends flanged class PN-I with high tensile brass spindle cast iron head operated wheel and cap top, nuts and bolts, washers including 3mm thick rubber gasket joint including taking down old unserviceable valve complete all as specified and directed.

S&F 150mm bore sluice valve, heavy duty both ends flanged class PN-I with high tensile brass spindle cast iron head operated wheel and cap top, nuts and bolts, washers including 3mm thick rubber gasket joint including taking down old unserviceable valve complete all as specified and directed.

S&F in replacement 100mm bore cast iron non returning valve, heavy duty both ends flanged, with high tensile brass spindle, cast iron head operated wheel and cap top, nuts, bolts and washers including 3mm thick rubber gasket joint complete all as specified and directed.

S&F in replacement 150mm bore cast iron non returning valve, heavy duty both ends flanged, with high tensile brass spindle, cast iron head operated wheel and cap top, nuts, bolts and washers including 3mm thick rubber gasket joint complete all as specified and directed.

Comprehensive Monthly Maintenance of dosing plants installed at various installations ( Pump Houses -13 Nos) of GE (West) New cantt Allahabad comprising of the following

(a) Checking of all parts for functional aspects of dosing plants such as checking of valve, checking of gauge etc and making the plant functional for operation also by arresting any kind of leakage/ blockage of plants any time any location under GE (West) Allahabad area, the work will be done by skilled mechanic and other minor parts not specifically mentioned shall also be replaced where required for proper functioning along with safety equipment

Disconnecting and taking out the UNSV 120 Watts agitator motor 960 RPM single phase 230 volts complete and rewinding with copper enemelled wire of suitable gauge, replacement of bearing , brackets and tolerance rings suitable for agitator including refixing complete all as directed.

S&F in replacement of gun metal gate valve 15 mm size ISI marked with iron wheel head, screwed both end for iron pipe complete all as specified and directed

Supply only Spacer of 1/2 HP capacity chemical dosing pump complete all as specified and directed.

Supply only Spacer gasket of 1/2 HP capacity chemical dosing pump complete all as specified and directed.

Supply only Piston of 1/2 HP capacity chemical dosing pump complete all as specified and directed.

Supply only Gear plate of 1/2 HP capacity chemical dosing pump complete all as specified and directed.

Supply only diaphragm of 1/2 HP capacity chemical dosing pump complete all as specified and directed.

Dismantling and taking out defective unserviceable butterfly valve and replacement with new butterfly valve 65 mm bore incl. jointing with MS nuts, bolts packing, minor adjustment complete all as specified and directed

Dismantling and taking out defective unserviceable butterfly valve and replacement with new butterfly valve 80 mm bore incl. jointing with MS nuts, bolts packing, minor adjustment complete all as specified and directed

Supply only common salt (granular) in bulk packing of jute/poly bags complete all as specified and directed. NOTE: Bulk supply of salt to be taken on charge through receipt voucher and to be issued through issue voucher based on specified daily consumption.

Supply only sodium hypo chloride solution in 50 litre packing each container PVC of strength 10 to 12% complete all as specified and directed. Make: Hibird or as approved. NOTE: Bulk supply of solution to be taken on charge through receipt voucher and to be issued through issue voucher based on specified daily consumption.

Supply only 1/2" hypo pump outlet NRV complete all as specified and directed. Make: RMCO/ VARIMA/ Prestine.

Supply only 1/2" hypo pump inlet NRV complete all as specified and directed. Make: RMCO/ VARIMA/ Prestine.

Supply only 1/2" NRV between hypo pump outlet and main line complete all as specified and directed. Make: RMCO/ VARIMA/ Prestine.

Supply only digital timer XT-246, 220 volt AC complete all as specified and directed. Make: RMCO/ VARIMA/ Prestine.

Supply only CPVC MTA 1/2" complete all as specified and directed. Make: RMCO/ VARIMA/ Prestine.

Supply only CPVC FTA 1/2" complete all as specified and directed. Make: RMCO/ VARIMA/ Prestine.

Supply only CPVC union complete all as specified and directed. Make: RMCO/ VARIMA/ Prestine.

Supply only drain valve complete all as specified and directed. Make: RMCO/ VARIMA/ Prestine.

Supply only flow guard gold complete all as specified and directed. Make: RMCO/ VARIMA/ Prestine.

Supply only PVC dosing pipe 10mm dia complete all as specified and directed. Make: Vardhman or equivalent as approved.

Supply only SMPS of rating AC 170-260V DC-9V-30A complete all as directed.

Supply only SMPS of rating AC 170-260V DC-15V-30A complete all as directed.

Repair and maint of LT panel/ star delta panel at water supply installation including provision of necessary PVC insulated copper wire, lugs, bushes, insulating material including necessary re-wiring with suitable size copper conductor complete all as specified and directed. NOTE: Spare parts of shall be measured and paid separately under respective item of schedule.

Supply only 4 pole power contactor Type-ML of rating 63/70 Amp for star delta starter/ LT panel complete all as specified and directed. Make: L&T/ Legrand/ ABB/ Schneider/ Siemens.

Supply only 3 pole power contactor Type-ML of rating 45/50 Amp for star delta starter/ LT panel complete all as specified and directed. Make: L&T/ Legrand/ ABB/ Schneider/ Siemens.

Supply only 2 pole power contactor Type-ML of rating 32 Amp for star delta starter/ LT panel complete all as specified and directed. Make: L&T/ Legrand/ ABB/ Schneider/ Siemens.

Supply only Timer ET-100 complete all as specified and directed. Make: L&T/ Legrand/ ABB/ Schneider/ Siemens.

Supply only Over Load Relay of capacity 30-50 Amp complete all as specified and directed. Make: L&T/ Legrand/ ABB/ Schneider/ Siemens.

Supply only Over Load Relay of capacity 45-75 Amp complete all as specified and directed. Make: L&T/ Legrand/ ABB/ Schneider/ Siemens.

Supply only Starter/stop push button complete all as specified and directed. Make: L&T/ Legrand/ ABB/ Schneider/ Siemens.

Supply only Single Phasing preventer VSP-3 complete all as specified and directed. Make: Minilec or equivalent as approved.

Supply only indicator LED type R, Y, B complete all as specified and directed. Make: L&T/ Legrand/ ABB/ Schneider/ Siemens.

Supply only Timer ETS D-1 complete all as specified and directed. Make: Minilec or equivalent as approved.

Supply and fixing in replacement of MCCB, 3 pole, 415 volts, 50 Hz, rated current 100 Amp, breaking capacity 25 KA, with thermal and magnetic release complete all as specified and directed. Make: L&T/ Legrand/ ABB/ Schneider/ Siemens.

Supply and fixing in replacement of MCCB, 3 pole, 415 volts, 50 Hz, rated current 200 Amp, breaking capacity 35 KA, with thermal and magnetic release complete all as specified and directed. Make: L&T/ Legrand/ ABB/ Schneider/ Siemens.

Repair, overhauling and testing of existing Starter panel board of any size and type including cleaning with compressed air, tightening of all electric connections to switches including replacement of MCB and switch fuse disconnect or units each of any rating, opening and refixing of doors with proper locking arrangement, replacement of wornout lugs, nuts, bolts, internal wiring with suitable size (minimum 1.5 sqmm) of PVC copper conductor wire and connection to main earth lead and spray painting with synthetic enamel paint of light grey shade in outer/ inner side of panel after cleaning and preparing surface including sign writing complete all as specified and directed. NOTE: Spare parts of shall be measured and paid separately under respective item of schedule.

Supply only 4 pole power contactor Type-TF 34 of rating 100 Amp for star delta starter/ LT panel complete all as specified and directed. Make: L&T/ Legrand/ ABB/ Schneider/ Siemens.

Supply only 3 pole power contactor Type-TF 30 of rating 45 Amp for star delta starter/ LT panel complete all as specified and directed. Make: L&T/ Legrand/ ABB/ Schneider/ Siemens.

Supply only 3 pole power contactor Type-TF 31 of rating 45 Amp for star delta starter/ LT panel complete all as specified and directed. Make: L&T/ Legrand/ ABB/ Schneider/ Siemens.

Supply only PVC connector complete all as specified and directed.

Supply only Over Load Relay of capacity 20-30 Amp complete all as specified and directed. Make: L&T/ Legrand/ ABB/ Schneider/ Siemens.

Supply only Over Load Relay of capacity 10-20 Amp complete all as specified and directed. Make: L&T/ Legrand/ ABB/ Schneider/ Siemens.

Supply only MCB Triple Pole and neutral, 63 Amps 415 volts, 10KA breaking capacity, convenient to 'C' Curve complete all as specified and directed. Make: L&T/ Legrand/ ABB/ Schneider/ Siemens.

Supply only MCB Triple Pole and neutral, 32 Amps 415 volts, 10KA breaking capacity, convenient to 'C' Curve complete all as specified and directed. Make: L&T/ Legrand/ ABB/ Schneider/ Siemens.

Taking out burnt/ unserviceable submersible pump set suitable for MS column pipe 100 mm bore from 35 to 40m below ground level complete all as specified and directed.

Lowering of submersible pump set after necessary repair and rewinding suitable for MS column pipe 100 mm bore including replacement of rubber packing, nuts, bolts, washers and cable connection with suitable size copper conductor complete all as specified and directed.

Taking out burnt/ unserviceable submersible pump set suitable for MS column pipe 150 mm bore from 35 to 40m below ground level complete all as specified and directed.

Lowering of submersible pump set after necessary repair and rewinding suitable for MS column pipe 100 mm bore including replacement of rubber packing, nuts, bolts, washers and cable connection with suitable size copper conductor complete all as specified and directed.

M&L in replacement of MS column pipe, 100mm bore and 5.4 mm thick, each 3 RM long including lowering, making threads and provn of MS Flange, cutting of Slot 3 Nos. in each flange, welding of flanges complete all as specified and directed.

M&L in replacement of MS column pipe, 150mm bore and 7.1 mm thick, each 3 RM long including lowering, making threads and provn of MS Flange, cutting of Slot 3 Nos. in each flange, welding of flanges complete all as specified and directed.

Taking out submersible pump set from column pipe of 40 HP capacity including disconnection of all electrical connections with all fittings for repair and transportation from site to workshop situated at local city for necessary repair/rewinding by cutting the burnt winding coils and cleaning the slots with non greasy materials and rewinding with PVC insulated copper wire as per existing size with insulating material complete reassembling the motor and back after repair and lowering and refixing of pump set with MS column pipe of 150 mm bore in bore well, including provn of replacement of all minor parts like rubber packing, nuts, bolts etc and reconnecting all electrical connection and including replacement of 16 sqmm 3 core PVC insulated flat submersible cable and testing complete all as specified and directed.

Taking out submersible pump set from column pipe of 35/33 HP capacity including disconnection of all electrical connections with all fittings for repair and transportation from site to workshop situated at local city for necessary repair/rewinding by cutting the burnt winding coils and cleaning the slots with non greasy materials and rewinding with PVC insulated copper wire as per existing size with insulating material complete reassembling the motor and back after repair and lowering and refixing of pump set with MS column pipe of 150 mm bore in bore well, including provn of replacement of all minor parts like rubber packing, nuts, bolts etc and reconnecting all electrical connection and including replacement of 10 sqmm 3 core PVC insulated flat submersible cable and testing complete all as specified and directed.

Taking out submersible pump set from column pipe of 20/25 HP capacity including disconnection of all electrical connections with all fittings for repair and transportation from site to workshop situated at local city for necessary repair/rewinding by cutting the burnt winding coils and cleaning the slots with non greasy materials and rewinding with PVC insulated copper wire as per existing size with insulating material complete reassembling the motor and back after repair and lowering and refixing of pump set with MS column pipe of 150 mm bore in bore well, including provn of replacement of all minor parts like rubber packing, nuts, bolts etc and reconnecting all electrical connection and including replacement of 10 sqmm 3 core PVC insulated flat submersible cable and testing complete all as specified and directed.

M&L for developing of bore well by means of 300 PSI air compressor and high velocity jet complete all as specified and directed.

Supply and fixing in replacement of CI Impeller for the pump of capacity 30 to 40 HP complete all as specified and directed.

Supply and fixing in replacement of bearing for the pump of capacity 30 to 40 HP complete all as specified and directed.

Supply and fixing in replacement of Thrust bearing for the pump of capacity 30 to 40 HP complete all as specified and directed.

Supply and fixing in replacement of seal for the pump of capacity 30 to 40 HP complete all as specified and directed.

Supply and fixing in replacement of bowl assembly for the pump of capacity 30 to 40 HP complete all as specified and directed.

Supply and fixing in replacement of CI Impeller for the pump of capacity 20/25 HP complete all as specified and directed.

Supply and fixing in replacement of bearing for the pump of capacity 20/25 HP complete all as specified and directed.

Supply and fixing in replacement of Thrust bearing for the pump of capacity 20/25 HP complete all as specified and directed.

Supply and fixing in replacement of seal for the pump of capacity 20/25 HP complete all as specified and directed.

Supply and fixing in replacement of bowl assembly for the pump of capacity 20/25 HP complete all as specified and directed. NOTE: (i) All supply materials (Item Nos 68 to 77) shall be taken on ledger charge through receipt voucher and to be issued for fixing through issue voucher. (ii) Contractor shall submit purchase voucher of all supply materials along with supply.

M&L for MS flanged reducer suitable for 150x100mm bore pipe including jointing with rubber gasket, MS nuts, bolts and washers complete all as specified and directed.

M&L for MS flanged reducer suitable for 100x80mm bore pipe including jointing with rubber gasket, MS nuts, bolts and washers complete all as specified and directed.

M&L for Pump non return valve 100 mm dia MS including jointing with rubber gasket, MS nuts, bolts and washers complete all as specified and directed.

Supply, jointing and testing of flat submersible cable PVC insulated PVC sheathed copper conductor of 25 sqmm 3 core complete all as specified and directed.

Supply, jointing and testing of flat submersible cable PVC insulated PVC sheathed copper conductor of 16 sqmm 3 core complete all as specified and directed.

Supply, jointing and testing of flat submersible cable PVC insulated PVC sheathed copper conductor of 10 sqmm 3 core complete all as specified and directed.

M&L in replacement DOL starter three phase 415 volts suitable for 3 to 5 HP motor including connection and fixing complete all as specified and directed. Make: Havells/ Indoasian/ Crompton

M&L in replacement DOL starter single phase 230 volts suitable for 3 to 5 HP motor including connection and fixing complete all as specified and directed. Make: Havells/ Indoasian/ Crompton

M&L for Earthing complete with galvanised steel earth plate electrode 600x600x6mm thick, burried directly in ground (earth pit not less than 2.25m deep below ground level) with top edge of the plate not less than 1.5m deep below normal ground level, connected to GI earth wire 4mm dia (7.50m) by means of bolts, nuts, check nuts & washers of galvanised iron or steel, earth lead wire protected by 15mm dia GI pipe light grade, 20mm dia light grade GI pipe for watering, meshed funnel, alternate layer of charcoal and common salt complete all as SSR Item No. 19471 and shown in electrical plate No. 3 of SSR part-I with PCC chamber, 50mm thick RCC cover in 1:2:4 type B-1 using 20mm graded stone aggregate reinforced with 8mm dia TMT bar @ 80mm c/c both way in lieu of CI pit cover and protection including necessary excavation and earth work complete all as shown in electrical plate No 5 of MES schedule Part-I and as specified and directed.

S&F in replacement 1.0 HP submersible pump with motor 2800 RPM single phase 230 volt complete all as specified and directed. Make: KSB/ CG.

S&F in replacement 1.5 HP horizontal submersible pump with motor 2800 RPM single phase 230 volt complete all as specified and directed. Make: KSB/ CG.

Disconnecting the electric motor of capacity 2 HP to 30 HP, 3 phase, 415 volts 50 C/S with booster pump of any make from the set, rewinding the stator coil with super enamelled copper winding wire of existing gauge and size including all winding/ insulating material, reassembling and re-fixing the same with true alignment, testing and commissioning complete all as specified and directed.

Disconnecting the DSM pump of 2 HP to 30 HP capacity and repair pump impeller, shaft, bush and bearing incl melt work, grinding and gland packing as required for smooth functioning of pump complete all as directed.

M&L in replacement star-delta starter three phase 415 volts suitable for10 to 12.5 HP motor including connection and fixing complete all as specified and directed

M&L for packing pea gravel of size 2.00x 4.00 mm natural shape brought directly from river bed and packing around casing pipe to entire depth upto ground level all as specified and directed

S&F in replacement Aviation Obstruction light with LED lamp with all accessories complete all as specified and directed. Make: Bajaj cat No. BGAV302LED or equivalent in Havells/ Crompton/ Philips.

M&L for two core 1.5 sqmm copper conductor cable for connecting up aviation light to main switch complete all as specified and directed.

S&F in replacement of 6 mm thick MS plate chequred plate including welding / grinding to make in shape complete all as specified and directed.

S&F in replacement of 6 mm thick MS Angle / flat iron/ MS bar including welding / grinding to make in shape complete all as specified and directed.

S&F in replacement motor protection relay SPG D2 DIN Rail Mounted 3 Phase to prevent motor dry run, under voltage, and over voltage complete all as specified and directed. Make: Minilec / schnieder / Hagger

M&L Sodium hypo chloride (Naocl) granular 65% packed in 45/50 Kg drum Used as disinfecting agent in pump house for disfinction of water complete.

M&L in replacement of Deep Bag Net of polypropylene and white polyester netting with 1.5" butterfly nut / clip connection and suitable to trap deep pool larger sediments complete.

Supply, installation, testing and commissioning in replacement of indoor type cubical panel board suitable for 3 phase, 4 wire, 415V, 50 Hz and CPRI approved manufacturer factory fabricated with CRCA sheet not less than 3 mm thick having modern fabrication process powder coating in approved shade provided with suitable gasket to make it dust and vermin proof and general constructions conforming to IS : 8623/93. The LT panel shall be front and back operable and duly compartmentalized for each control gears. The panel should have suitable size of aluminium Bus -bar three phase 4 wire system having current carrying capacity 400 Amps of the incomer MCCB. The panel should have the following incoming and out going controls duly fixed with the panel by means of suitable link plates complete all as specified and as directed by Engineer -in-charge. (PCC platform of suitable size for mounting the LT Panel is deemed to be included in the quoted rate;- (i) MCCB 4, pole 35 KA with adjustable thermal setting, 415V, 160 Amp - 01 No. (ii) MCCB 4, pole 35 KA with adjustable thermal setting, 415V, 100 Amp - 01 No (iii) Star delta starter comprising suitable size of 3 pole contactors for 40 HP submersible pump with thermal over load relay complete - 01 No (iv) Motor protection relay for single phase, over load, over voltage (v) Digital Volt meter 0-500 volts (vi) Ammeter 0-500 amps with suitable size of Cts (vii) All connections to be done through suitable size PVC insulated copper cables (viii) LED RYB indicator - 01 Set (ix) MCB' TP 32 Amps 10 KA - 01 No (X) MCB SPN 32 Amps 10 KA - 01 No (xi) Single phase preventer - 01 No Make of MCCB, MCB & Contactor: L&T (MNX Series), Hagger, Siemens,

SECTION : I (PASSANGER LIFT)

Comprehensive maintenance of electrically operated Johnson make lifts 01 No of Ground + 03 floor (total Four landings) with electric power operated doors, auto electric levelling device of capacity patient lift (8 passenger) installed at PCDA (P) Admin bldg complete all as specified and directed.

Comprehensive maintenance of electrically operated Johnson make lifts 01 No of Ground + 03 floor (total Four landings) with electric power operated doors, auto electric levelling device of capacity patient lift (8 passenger) installed at PCDA (P) New bldg complete all as specified and directed.

Comprehensive maintenance of electrically operated Johnson make lifts 01 No of Ground + 03 floor (total Four landings) with electric power operated doors, auto electric levelling device of capacity patient lift (13 passenger) installed at PCDA (P) Grants bldg complete all as specified and directed. Notes : Applicable for item Sch '101 to103" (a) Major unserviceable parts shall be measured and paid separately under section -II Srl item of supply only in replacement and cost of labour required for replacement of spares / accessories included in the Srl item Nos 105 & 109 However srl item no 105 & 109 is deemed to be included the cost of minor spares/ accessories as mentioned in Srl item Nos 105 & 109 (b) The tenderer shall have to replace the unserviceable materials with the OEM materials only. Necessary paid vouchers shall be submitted from OEM for the materials like ARD, drive, motors etc. Contractor is responsible for renewal of license fee. The charges for annual government inspection is deemed to be included. c) The comprehensive maintenance include weekly, fortnightly, monthly , quarterly, half yearly inspection/testing/ preventive maintenance, replacement of unserviceable parts/ material including labour, transportation etc. complete. (d) The complaints shall be attended forthwith as the complaint/failure from the time to time of receipt of the same. Deemed to be inclusive of T&P required to carry out repairs, stationery for upkeep of records, uniform to mechanic and helper etc. The contractor shall maintain the attendance register of personnel deployed for the work and the same shall be put upto concerned JE E/M as & when asked. (e) The contractor shall obtain signature of Authorized Representative of GE and in token of satisfactory completion of defects. Any minor complaint requiring no spare part, shall be rectified within 1 hour & if requiring minor parts, shall be rectified within 2 hrs. Any major complaint requiring major spare part/repair, shall be rectified within 24 hours. In case delay in rectification of any minor complaint, a panel recovery @ Rs 100/- per hour shall be imposed upon the Contractor & in case of delay in major repair of the lifts for more than 24 hours & up to 10 (Ten) days, penalty on the Contractor for a sum of Rs. 2000/- per lift per day or part (f) A complaint register will be maintained by the contractor and the contractor will obtain the complaint from AGE E/M office on every working day at 0800 hrs or will be informed telephonically by the Dept. at any time. Two mobile Nos and two email IDs to be maintained by the contractor to communicate the complaints. After attending the complaints the contractor will obtain the signature from the Rep of user/AGE/GE every day as token of complaints attended. (g) Srl item Nos 01 & 02 of consists of comprehensive maintenance of M/S Johnson lifts at PCDA (P) building. The work will be carried out under Authorised dealer comprehensive maintenance of lifts, special condition, Particular specification, MES SSR and as directed by GE/Engineer-In-Charge. (h) Lift mechanic shall be well experienced in lift/elevators repairs and ITI qualified in related trade maintenance and fully equipped with required T&P. (j) Contractor shall carry out daily, weekly, fortnightly, monthly, quarterly and half yearly inspection and report as mentioned in Check list of PS and same shall be submitted to the Engineer-In-Charge.

SECTION : II

Supply & installation of sleeve (C/I/casting traction sleeve 4 grooves pulley Code OD 560x4x13mm in passenger lifts) as per site requirement welding/ brazing etc complete and testing on load all as per directed by Engr-in-Charge.

Supply only in replacement of LOP of door with digital display (Ground floor/I/II/III/Top floor)

Supply only in replacement of shoe liner as per existing size of lift

Supply only in replacement of PCB unit for MCU, CCU & CTU

Supply only in replacement of maintenance free battery with initially charged Capacity 12 V 18 AH complete all as directed.

NOTE: (i) The above maintenance shall be done through OEM, The tenderer has to submit a intent of MOU from JOHNSON LIFT.

AC PLANT

M&L for checking the leakage in both low and high side of the system by feeding dry nitrogen upto 300 PSI to maintain adequate pressure in the system, plugging the leaks including S&F in replacement of Teflon sealing of all refrigerant line valves like liquid lines valves/ suction/ discharge valves of compressors, gland packages of all angle valves flaring of all connections framing welding etc complete for Package AC plant of capacity 8.5 TR for DPTI, complete all as specified and directed by Engr-in-Charge.

M&L for opening the upper sheet and side sheet of AHU for access to cooling coil including M&L for washing/cleaning of cooling coil externally with mild acid (or caustic soda hot water solution) followed by water jet including cleaning/washing of air filters and re-fixing and changing of V Belt both set with necessary fitting and T&P for mounting for Package AC plant of capacity 8.5 TR for DPTI, complete all as specified and directed by Engr-in-Charge..

M&L for dismantling of electric driven horizontal induction motor of capacity 5/7.5 HP of any type and make, by engaging sufficient man power and suitable T&P to ensure safety of motor including disconnecting of electric connections, dismantling of motor, taking out the burnt windings, cleaning and washing of slots and rewinding the same with copper winding wire of existing gauge and quantity (as per original manufacturer design) including replacement of all damaged parts i. e. bearings, bush, thrust plate, thrust bearing, connector plate, insulating materials such as insulating sheets insulating paper (Class "F"), sealing compounds etc and reassembling the motor after varnishing, heating/drying, greasing of moving parts etc and reinstallation of the motor in original location, checking the alignment, making proper electric connection, testing for smooth operation, complete all as directed. Note : (i) The cost of winding wire and all replaced defective parts are deemed to be included in quoted rates and no extra cost shall be paid to the contractor in this effect. (ii) The cost of transportation (to and fro) and other necessary equipment shall be arranged/brought by contractor to complete the job at site or at repair shop and no extra cost shall be paid to the contractor in this effect.

M&L for opening the outer sheets of package unit to access the cooling coil, washing / cleaning of cooling coil externally with mild acid (or caustic soda hot water solution ) followed by water jet including cleaning / washing of air filter and re-fixing for AC Plant of capacity 8.5 TR Plant complete all as specified and directed by Engr-in-Charge. (a) Servicing by oiling & cleaning with liquid soap , cleaning of fins by means of air blower and water with pressure jet and changing of air filter complete with cleaning of Cooling & Condensing coil all as directed by EIC. (b) Major items requiring renewal shall be measured and paid separately as supply only as given below.

Dismantling of burnt fan motor of 8.5 TR Package AC double shaft and supply & fixing new fan motor (Suitable for Carrier/Voltas/Blue star/LG/Samsung Make AC) as per sample complete all as specified and directed.

Supply only refrigerant gas Non CFC compatible to R-407 in returnable sealed cylinder all as specified and directed. (Make:- Floran / Mafron/R value)

Servicing of IDU (Indoor unit) of ceiling mounted casket type split Air conditioner of 3 TR/4 TR capacity comprising of Blower, blower motor ,water lifting motor, oiling & greasing of moving parts complete all as specified and directed.

S&F in repairs ML-1 contractor 240 volt, 25 Amp for split type AC complete all as specified and directed

S&F in repairs copper capillary of size 0.55 mm complete all as specified and directed

Taking out the existing unserviceable low pressure cut - out switch and supply & fixing new low pressure cut-out switch type. MP - 1 all as specified and directed. (Make:- INDFOSS / RANUTROL)

Taking out the existing unserviceable low pressure cut - out switch and supply & fixing new low pressure cut-out switch type. MP - 5 all as specified and directed. (Make:- INDFOSS / RANUTROL)

Supply and replacement of return air grill aluminium with powder coated white collers of size 300 mm x 900 mm complete all as specified and directed.

Supply and replacement of air grill MS air control damper of size 300 mm x 900 mm complete all as specified and directed.

M&L for servicing of air curtain by removing the existing choked fins/filters complete all as specified and directed by Engr-in-Charge.

Taking down defective /unserviceable AC compressor of capacity 8.5 TR package type and rewinding/repair of compressor of make Tecumseh, Toshiba, Mitsubishi, Hagelin at company's authorized outlet, refixing including brazing work, etc., pressure testing & establishing vacuum for dehydration, complete all as specified and directed by Engr-in- Charge.

M&L in replacement for EWT/LWT sensor suitable for AFT tripping for AC plant of 2x8.5 TR package AC, complete all as specified and directed by Engineer-in-Charge.

Removing burnt / defective sealed compressor unit of any make from any type of air conditioner package type 8.5 ton capacity by cutting of suction and discharge lines unscrewing the foundation nuts, bolts etc, supply amd fixing of new sealed compressor unit of suitable make as existing by connecting suction and discharge lines with gas welding/brazing work and tightening foundation nuts & bolts etc all as directed

S&F in repairs PCB with Micro Computer Control LCD display suitable for 8.5 TR central AC plant complete all as specified and directed. (make Blue Star)

Supply and laying LT XLPE insulated under ground 1100 volt grade with stranded aluminium conductor of following sizes in trenches /passing through pipes/ on poles etc complete all as specified and directed.

(a) 16 sqmm 4 core

(b) 25 sqmm 4 core

(c) 35 sqmm 3.5 core

(d) 95 sqmm 3.5 core

Supply and laying in replacement of 2.5 mm thick insulated synthetic mat of confirming to IS 15652 : 2006 and meeting the requirements of IS 5216 (Part 1.2 & 3) IS 8437, IFC-479 Pub-1, alongwith suitable adhesive/chemibound, PU resin, waterproofing compound and sealing material as per in service recommendation of IS : 15652 class – B suitable for working voltage up to 11 KV with trolley movement complete all as specified and as directed by Engineer-in-charge. Make : SAFEVOLT/INSULICA

Comprehensive maintenance of electrically operated lifts 01 No in MH of Ground + 01 floor (total two landings) with electric power operated doors, auto electric levelling device of capacity patient lift (13 passenger) installed at Family ward MH bldg complete all as specified and directed. ( Make: Johnson)

Notes : Applicable for item Sch 'A" (a) Major unserviceable parts shall be measured and paid separately under section -II Srl item No 135 to 138 of supply only in replacement and cost of labour required for replacement of spares/ accessories included in the Srl item Nos 133 . However srl item no 133 is deemed to be included the cost of minor spares/ accessories as mentioned in Srl item Nos 133 (b) The tenderer shall have to replace the unserviceable materials with the OEM materials only. Necessary paid vouchers shall be submitted from OEM for the materials like ARD, drive, motors etc. Contractor is responsible for renewal of licence fee. The charges for annual government inspection is deemed to be included. c) The comprehensive maintenance include weekly, fortnightly, monthly , quarterly, half yearly inspection/testing/ preventive maintenance, replacement of unserviceable parts/ material including labour, transportation etc. complete. (d) The complaints shall be attended forthwith as the complaint/failure from the time to time of receipt of the same. Deemed to be inclusive of T&P required to carry out repairs, stationery for upkeep of records, uniform to mechanic and helper etc. The contractor shall maintain the attendance register of personnel deployed for the work and the same shall be put upto concerned JE E/M as & when asked. (e) The contractor shall obtain signature of Authorized Representative of GE and in token of satisfactory completion of defects. Any minor complaint requiring no spare part, shall be rectified within 1 hour & if requiring minor parts, shall be rectified within 2 hrs. Any major complaint requiring major spare part/repair, shall be rectified within 24 hours. In case delay in rectification of any minor complaint, a panel recovery @ Rs 100/- per hour shall be imposed upon the Contractor & in case of delay in major repair of the lifts for more than 24 hours & up to 10 (Ten) days, penalty on the Contractor for a sum of Rs. 2000/- per lift per day or part (f) A complaint register will be maintained by the contractor and the contractor will obtain the complaint from AGE E/M office on every working day at 0800 hrs or will be informed telephonically by the Dept. at any time. Two mobile Nos and two email IDs to be maintained by the contractor to communicate the complaints. After attending the complaints the contractor will obtain the signature from the Rep of user/AGE/GE every day as token of complaints attended. (g) Srl item Nos 133 of consists of comprehensive maintenance of M/S Johnson lifts at MH building. The work will be carried out under Authorised dealer comprehensive maintenance of lifts, special condition, Particular specification, MES SSR and as directed by GE/Engineer-In-Charge. (h) Lift mechanic shall be well experienced in lift/elevators repairs and ITI qualified in related trade maintenance and fully equipped with required T&P. (j) Contractor shall carry out daily, weekly, fortnightly, monthly, quarterly and half yearly inspection and report as mentioned in Check list of PS and same shall be submitted to the Engineer-In-Charge.

SECTION : II

Supply & installation of sleeve (C/I/casting traction sleeve 4 grooves pulley Code OD 560x4x13mm in passenger lifts) as per site requirement welding/ brazing etc complete and testing on load all as per directed by Engr-in-Charge. NOTE : (i) The above maintenance shall be done through OEM, The tenderer has to submit a intent of MOU from JOHNSON LIFT.

Supply only in replacement of LOP of door with digital display (Ground floor /Top floor)

Supply only in replacement of shoe liner as per existing size of lift

Supply only in replacement of PCB unit for MCU, CCU & CTU

Ambrish Builders

P S TRADERS

MTR GROUP & COMPANY

Aawadh associates