Renovation /Repairing work for office of the sharda canal division in Distt. Shahjahnapur

Amount

Dismentling existing old Plaster including disposal of refuse as directed by the Engineer in charge with a distance of 60m (200fit)

Dismentling of old BOE Soling and stackng of dismentaled bricks at site Required for proper completion of work as directed by engineer in charge.

Dismentling of brick or stone work and cement Concrete work in cement mortar and including stacking of material with in a distance of 60m as per direction of engineer in charge.

Dismentling Door and window, chaukhat with hold fast including stacking material with in a distance of 60m as per direction of engineer in charge.

12.5 mm thick cement plaster in 1:4 cement and course sand including cost of all material labour T&P complete etc.

Finishing wall with water proofing cement paint of approved make such as super snowcem , durrocem, guttucm, supreme quality of required shade on uncoated throughly brushing the surface to remove all dirt and remains of loose powdered materials including curing and cost of all materials including prividing and applying POP 2mm Thick.

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacture) with water absorptions less than 0.08% and conforming to IS : 15622 OF Approved make in all colours and shades laid on 20mm thick cement mortar (1cemnt :4 coarse sand) including grouting the joints with white cement and machining pigments etc complete (size of tile 60x60) cm

Supplying and Fixing sal wood chaukhat 0.10x0.1250m size including all cost of material labour T&P etc For Proper Completion of Work.

Supply and fixing 4cm. Thick sal wood shutter partialy pannel partialy Glazed including cost of all material carriage up to site of work all taxes T&P Labour Required for proper completion of work.

Finishing wood work with enamel paint of approved quality asian OR Equivalent including all cost of material and primer to achieve even painted surface of required coat, carriage up to site of work all Taxes T&P and Labour Required for Proper completion of work.

3.50cm. Thick CC 1:2:4 on Roof treatment with G.I. steel jali as a membrane including all co0st of material carriage up to site of work all Taxes T&P and Labour Required for Proper completion of work.

Supply and fixing 6mm (1/4") china white glazed in flooring or skurting dado laid with 1:3 cement and approved coarse sand mortar finished white cement slurry jointing and polishing complete including supply of all material labour and T&P Required for Proper completion of work.

Supplying and fixing galvanized jali shutter including cost of all material carriage up to site of work all Taxes T&P and Labour Required for Proper completion of work.

Supplying fabrication and fixing of steel gate (5.00x1.80m) with cc pillars as required hold fast locking arrangement etc including cost of all material carriage up to site of work all taxes, T&P and labour Required for proper completion of work.

Providing and fixing false ceiling at all height providing and fixing of frame work made of special sections power pressed from MS sheeys and galvanized with zinc coating of 120 gsm/sqm (both side inclusive) as per IS :277 of 27 mm and 37 mm at 1200mm centre to centre one flange cleat fixed to the ceiling with dashfastener 12.5mm dia x50mm long with 6mm dia bolts other flange cleat fixed to the angle hangers of 25x1x0.50 mm of required size and other end of angle hanger fixed with intermediate G.I. Channels 45x15x0.90 mm running at the spacing ogf 1200mm centre to centre, to which the ceiling section 0.50mm thick bottom wedge of 80mm with tapered flanges of 26 mm each having lips of 10.50 mm at 450 mm centre to centre shall be fixed in a direction perpendicular to GI intermediate channel with connecting clips made out of 2.64 mm dia x230 mm long g.i. wire at every junction, including fixing perimeter of ceiling fixed to wall /Partition with the help of rawl plugsat 450mm centre with 25 mm long dry wall screws @230 mm interval, including fixing of sypsum board to ceiling section and perimeter channel with thje help of dry wall screws of size 3.5x25 mm at 230 mm centre to centre including jointing and finishing to flush finish of tapered square edges of the board with recomended jointing compound, jointing tape s, finishing with jointing compound in 3 layers covering up to 150 mm on both sides of joints and two coat of primer suitable for board . all as per manufacturers specification and also including the cost of making openings for light fittings, grills , diffusers, cutout made with frame of perimetr channels suitable fixed all complete as per drawing , specification and directionof the enginer in charge but excluding cost of painting with 12.5 mm tappered edge gypsum moisture resistant board.

RACHANA ENTERPRISES