Construction of compound wall around the Valluvan pet burial ground at Periapet Village in Villianur Commune

Amount

code 2.8.1 Earth work in excavation by mechanical means (Hydraulic excavator)/manual means in foundation trenches or drains (not exceeding 1.5m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms , lift upto 1.5m, including getting out the excavated soil and disposal of surplus excavated soil as directed , within a lead of 50m -All kinds of soil.

Code No. 4.1.10 Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering.- All work upto plinth level -1:5:10 (1 cement:5 Fine aggregate : 10 graded stone aggregate 40mm nominal size)

code No.5.12 Providing , hoisting and fixing upto floorfive level precast reinforced cementconcrete work in string courses, bands,copings, bed plates, anchor blocks, plain window sills and the like, including the cost of required centering, shuttering but excluding cost of reinforcement , with 1:2:4 (1 cement : 2 Fine aggregate : 4 graded stone aggregate 20mm nominal size)

Code No. 5.2.2 Reinforced cement concrete work in walls (any thickness) , including attached pilasters, buttresses , plinth and sting courses , fillets , columns , pillars , piers , abutments , posts and struts etc. upto floor five level excluding cost of centering , shuttering , finishing and reinforcement - 1:1.5:3 (1 cement : 1.5 fine aggregate : 3 graded stone aggregate 20mm nominal size)

Code No. 5.3 Reinforced cement concrete work in beams ,suspended floors, roofs having slope upto15 degree landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto floor five level excluding the cost of centering, shuttering,finishing and reinforcement with 1:1.5:3 (1 cement : 1.50 fine aggregate : 3 graded stone aggregate 20mm nominal size)

Code No. 5.9.1 Centering and shuttering including strutting , propping etc and removal of form for - foundations, footings, bases of columns etc for mass concrete

Code No. 5.9.5 Centering and shuttering including strutting , propping etc and removal of form for - Lintels, beams, plinth beams, girders, bressumers and catilevers

Code no. 5.22.6 Steel reinforcement for R.C.C.work including straightening , cutting , bending , placing in position and binding all complete upto plinth level - Thermo -Mechanically treated bars Fe - 500D or more

Code No.6.2.2 Brick work with common burnt clay modular bricks of class designation 7.5 in foundation and plinth in - cement mortar 1:6 (1 cement : 6 fine aggregate)

Code No.6.4.2 Brick work with common burnt clay F.P.S (non modular ) bricks of class designation 7.5 in superstructure above plinth level upto floor five level in all shapes and sizes in - cement mortar 1:6 ( 1 cement : 6 fine aggregate)

Code No.9.165.1A Providing and fixing of 65mm Godrej Navatal lock of 6 levers etc complete.

Code No.10.25.2 Steel work welded in built up sections /framed work , including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required - in gratings, frames, guard bar, ladder, railings, brackets,gates and similar works

Code No.13.8.3 12mm cement plaster of mix cement mortar1:5(1 cement : 5 fine aggregate)

Code No.13.46.1 Finishing walls with Acrylic Smooth exterior paint of required shade - New work (Two or more coat applied @ 1.67 ltr / 10 sqm over and including base coat of water proofing cement paint applied @ 2.20 kg /10 sqm

Code No.13.62.1 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade - Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture

Code No.15.9.2 Demolishing stone rubble masonry manually /by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metre lead - In cement mortar.

Code No.20.2.1 Boring , providing and installing bored cast -in-situ reinforced cement concrete piles of grade M-25 of specified diameter and length below the pile cap, to carry a safe working load not less than specified, excluding the cost of steel reinforcement but including the cost of boring , with bentonite solution and temporary casing of appropriate length for setting out and removal of same and the length of the pile to be embedded in the pile cap etc, by percussion drilling using direct mud circulation (DMC) or bailer and chisel technique by tripod and mechanical winch machine all complete, including removal of excavated earth with all its lifts and leads (length of pile for payment shall be measured upto bottom of pile cap) - 450 mm dia piles - Note: Truck Mounted rotary/TMR/Tubewell boring machine shall not be used

code no. 30.7 Supply of Quary rubbish including stacking to department gauge for premeasurement and spreading required thickness

M. GUNASEKARAN (BID ID -52354)

R Vasu (BID ID -52311)

M/S TAS COMPANY KULOTHUNGAN J (BID ID -52322)

J. KANNIYAMMAL (BID ID -52369)