Erection of 11 KV HT Line 0.4 KV LT Over head Line construction of 11 0.4 KV new sub station for feeding temporary power supply for typeIV (Block B) quarters and type III (Block B) quarters in new constructed tower buildings of new colony HTPS Ka

Amount

Erection of Rail/round pole/RS joist pole 09-11 Mtr. Long including digging of pit raising, back filling, ramming and cement concreting as per scop of work.

Providing & fixing of :-

V shape 11 KV MS angle cross arm 65x65x6 mm with Fclamp, cross arm holding clamp with nut -bolt /MS channel cross arm 100x50x2240 mm. , Clamps with nut & bolt for channel cross arm.

11 KV pin insulator with pin or 11 KV disc insulator T&C type with disc fitting .

MS angle iron size 65x65x6 mm., 2700 mm long with 04 clamp (For Cross bracing arrangement of double pole)

complete pole stay with wire on the HT/LT line poles.

Barbed wire GI

Laying of line conductor including stringing, jointing and sagging of HT/LT line poles in Tower area, New colony.

Providing & fixing of Shakle insulator, M.S. clamps set with nuts & bolts etc.for LT lines.

Providing of guarding on overhead HT lines including provision of 75x75x6 mm, 1.8 Mtr. Long angle iron, G.I. wire 08 swg. with MS clamps, nuts & bolts including stringing, jointing, sagging of G.I. wire complete in all respect as per scope of work.

Cutting of tree branches along the line side (Approx 700 mtr.) as required.

Painting of poles with 02 coats red oxide primer and 02 coats silver colour good quality paint like Asian etc.

Carriage of 09-11 mtr. long RS joist/rail pole from site store to work place (about 2.5 Km.) as required.

Installation, Erection & fitting of 11 KV Double pole structure for Transformer 11 KV supply including Top Channel, disc fitting, TPMO set, fuse set & dropper conductor arrangement including digging of pit ramming and fillingwith 1:4:8 cement,concrete and sand ratio including making pole plinth 45 cm above the ground lavel.

Carriage of Transformer & putting it on plinth and making proper HT/LT connection including testing of line and Transformer.

Providing and fixing of Complete GI pipe earthing of transformers, MCCB panel, Double pole structure, HT/LT Poles and 04 nos. elevators of tower buildings including masanary work.

Providing and fixing of GI earth strip of size 25x3 mm. with suitable fixing arrangement.

Laying of 185-300 Sq.mm. 3.5 core PVC/XLPE LT cable in ground with supply of sand and bricks with its termination and end connections.

Fabrication of MCCB pannel with fixing of MCCB and three phase DB on bakalite sheet including connection of cables with lugs

Providing & Fixing and making connection to 3-phase junction box with connection of 3-phase supply cables for feeding Tower quarters.

Providing and fixing of 25 Sqmm. Multi strand single core copper cable on wall with the help of wall clips and connection to DB with 25 mm. copper lugs.

Providing and Fixing of copper lug of 25 mm. size to the 25 Sqmm. cable for DB connection.

Making new tubular/RS joist pole of 09-11 mtr. long by jointing the small size good pole to the small pieces of poles of same size by cutting and welding work on old and unused small pieces of poles (Including 02 cut and 02 joint maximum).

Olympus Engineers and Contractor

SHARMA ELECTRIC WORKS