E T No. 17/W/EUDC/SRE/2020-21

Amount

Carriage of 9 no. Round pole, metering cubical 11kv CT/PT comfined unit and other line material from ESC, SRE/JE stare to site of work including loading and unloding at both end distance upto 10km.

Erection of R/Pole including fiting of all accessories for 11KV line.

Errection of D/Pole structure of R/Pole.

Fixing of tap/traper/S/s xarm on the pole.

Grouting of poles.

Making the pole plinth.

Providing and fixing of R/Pole clamp make by m.S. strip of size 50x50x6 mm including nut/bolts of sutiable size.

Mounting of CT/PT unit on the D/Pole including complete connection.

Mounting of 11KV metering cubical including fixing of 11KV cable both site.

Laying, stringhing and sagging of ACSR Dog contractor including limping and jumpering.

Laying, stringthing and sagging of 11KV X LPE cable 3x120 sq. mm.

Filling of outdoor/indoor type cable box complete in all respect.

Earthing of CT/PT unit and metering cuincale by boaring 40' deep GI pipe of best quality connected with GI strip 35x4mm including spreading of charcoil and rollar per site requirment.

Safe cartage of 11 mtr. Long STP pole from ESC, SRE, to site of work including loading & unloading at both eends. (Distance about 35 km.)

Safe cartage of complete line material from ESC, SRE to site of work including loading & unloading at both ends. (Distance about 35 km.)

Erection of Single support on ST poles up to 8.5/11 mtr. Long with complete fitting of all accessories of 11 KV/LT as per RESPo specification.

Safe cartage of 11 KV XLPE cable size 3x300 sqmm. From ESC, SRE to site of work including loading & unloading at both ends. (Distance about 35 km.)

Erection of double pole on 11 mtr. Long STP poles with complete fitting e.g. channel including fitting of Disc/Pin insulators duty of 450x450x1500 mm. with new brick ballast size 1"x1.5" with plinth as per RESPO specifications.

Grouting of stay rods by digging of pits in block of 600x600x300 mm & cement concreting in ratio 1:4:8 with cement, sand and brick ballast and nozzling of stay wire 7/10 SWG and fitting the same on the pole including fixing of stay insulator in stay wire.

Earthing of STP poles with earthing rod complete.

Providing and fixing of all type clamps with nuts and bolts for STP poles made of new MS flat iron 50x6 mm as per RESPo specification.

Laying, lifting, stringing, sagging jumpring & binding o ACSR Reccon conductor for 11KV & LT line including complete.

Laying lifting, Stringing , sagging jumpring & binding of ACSR weasel conductor for 11KV & LT line including complete.

Removal old & used ACSR conductor then making roll conductor & shifting the same site to JE store at S/s.

Laying of 11 KV XLPE cable 3x70 sqmm. In to the trench after spreading the sand into the trench and then laying of 1st class bricks in to the trench and put the cable on the bricks and then covered the cable with 1st class bricks from all three sides of cable and then filling the earth with ramming.

Providing and filling the cable jointing kit indore & outdoor type size 3x70 sqmm as per RESPo specification.

Grouting of pole.

Providing and fixing of various type MS nut and Bolts.

Providing and fixing fo Stone pad properly.

Safely fixing of 11KV Quibical metering 10/5 Amp peroperly.

Safely fixing of 11KV CT/PT metering Unit 10/5 Amp properly.

KAPIL TRADERS

Omveer Singh Contractor and Enggineer