CERTAIN REPAIRS TO TECH AREA AND OTHER BLDGS OF 9 I R AND O FLT UNDER GE SOUTH UDHAMPUR

Amount

Demolition of Brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pilars, etc but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and as directed.

Demolition cement concrete in ground floors and paving ( unreinforced ) nexc. 15 cm thickness ( below or above ground floor) complete all as specified and as directed.

Dismantling floor, hearth or wall tilling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish of the premises complete all as specified and as directed.

Excavating in trenches, n exc 1.5 m wide and n.exc 1.5 m in depth; for foundation, & n exc 10 Sqm on plan and n exc 1.5 m in depth and getting out in hard /dense soil, complete all as specified and as directed.

Excavation in post holes each not exceeding 0.50 cum getting out, returning filling in and well ramming earth around in layers not exceeding 25cm, watering and removing surplus soil to a distance exceeding 1.5 kilo mtr and making good distrub surfaces as in any type of soil.

PCC 1:4:8 type D2 (using 40mm graded stone aggregate) in foundations, filling and mass concrete, complete all as specified and as directed.

Shingle filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled, and blinded with earth and rammed including watering complete all as specified and as directed.

PCC(1:2:4) type B-2 (40 mm graded aggregate as in fdn, filling in post holes complete all as specified and as directed.

Dismentling wrought iron or mild steel work of any description not otherwise provded for complete all as specified and as directed

Dismanttling of plain or corrugated AC sheets/steel sheetings any thicness as in roof coverings complete all as specified and as directed.

Roof trusses (framed) trussed, purlins, crane gantries rails and fastenings and heavy brackets, post, eves board incl frame work and similar work framing (beam, tee, channel or flat sections) including distance pieces cleats including welding reavrign etc complete all as specified and as directed.

Pre painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick crimpted/tapard at the external end slop of any colour having tansile strength 550 Mpa as in roof covering fixed with self tapping screws and caps etc complete all as specified and as directed.

Pre-painted galvatume aluminum zinc coating GI based Plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws complete all as specified and as directed.

MS flat iron as in wind ties etc confirming to fe 410-0 or Fe 310-0 including clampscomplete all as specified and as directed.

Material and labour preparation of new steel surfaces of any description over 10 cm idth or girth and applying two coat of synthetic enamel paint over a coat of red oxide chrome primer all as specified and as directed

Brick work with sub class 'B' brick straight or curved on plan exc 6m mean radious built in CM 1:6 as in brick work/brick pillars etc complete all as specified and as directed.

Brick work with sub class 'B' brick straight or curved on plan to any radious in half brick thic wall built in CM 1:4 as in brick work etc complete all as specified and as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc. 25cm thick all as specified and as directed.

Removing excavated soil material n.exc 50m and depositing where directed at a level not exc. 1.5m above the base in soil all as specified and as directed.

Taking down cement plaster on brick or stone walls, etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed.

Rendering 5 mm thick in CM 1:3 on fair faces of concrete as in ceiling surfaces even and smooth without using extra cement. all as specified and as directed by Engr -in - charge/ GE.

15 mm thick rendering on fair faces of brick or concrete surfaces in CM 1:6 and finishing the surfaces even and smooth without using extra cement complete all as specified and as directed.

15 mm thick rendering on fair faces of brick or stone/concrete surfaces in cement mortar 1:4 upto G+2 story bldgs including microconcreting, jalli and at chajja's and finished surface even and smooth without using extra cement complete with water proofing compound all as specified and as directed.

Applying two coats of weather proof exterior emulsion paint (Asian Ultima APEX or Berger Weather Allguard or equivalent) over a coat of exterior weatherproof wall care putty up to G+2 floor height including preparation of surface complete all as specified and as directed.

Preparation of new plastered or un- plastered surfaces and applying three coats of white wash on ceiling, chajja complete all as specified and directed.

Applying two coats of cement based paint over a coat of chalk whiting including preparation of new/old plastered surfaces complete all as specified and as directed.

Two coats of distemper oil emulsion over a coat of primer including preparation of new plstered surfaces of walls all as specified and directed.

75 mm thick PCC 1:4:8 type B2 using 40mm graded aggregate as in sub base of floor etc complete all as specified and as directed.

M&L for 25mm thick cement concrete 1:2:4 type B-0 using 12.5mm graded crushed stone aggregates as in levelling course of floor and finished even and fair complete all as specified and as directed.

Screed bed or bedding layers of 15mm thick cement mortar 1:6 for laying floor finishes all as specified and as directed.

Dismantling of kota stone/Granite in slab any desctription or thickness as in flooring laid bedded and pointed in any mortar complete all as specified and as directed.

Machine cut kota stone slab flooring 20-25 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slabe including rubbing and mirror polishing complete all as specified and as directed.

All as per item No 32 above but on vertical serfaces complete all as specified and as directed.

Non skid coloured tiles 7 to 8 mm thick area of each tile exceeding 0.06 Sqm but not exc 0.11 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.

Non skid coloured tiles 7 to 8 mm thick area of each tile exceeding 0.11 Sqm but not exc 0.18 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.

Ditto as per item No 35 above but in vertical surfaces such as skirting/dado etc complete all as specified and as directed.

Vitrified (Double charge) dark shade tiles, area of each tile not exc 0.36sqm , 10mm thick (square or rectangular) of superior quality as in floor surfaces set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles complete all as specified and directed.

Ditto as per item No 37 above but in vertical surfaces such as skirting/dado etc complete all as specified and as directed.

Vitrified coloured heavy duty (Dura stone) 300 x 300 x 10mm thick tiles as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

Rendering 10mm thick on fair faces of brick work or concrete surface in CM 1:4 on vertical surfaces/backing coat complete all as specified and as directed.

Glazed ceramic coloured tiles of size 300x200mmx7mm thick, on vertical surfaces, set and jointed in neat cement slurry and pointed in coloured cement to match complete all as specified and as directed.

Glazed ceramic coloured tiles of size 600x300x7-8mm wall tiles set and jointed in neat cement and in white/coloured cement to match with the colour of tile etc, complete all as specified and directed

20mm thick granite (of any type) machine cut as in dado etc laid over cement backing coat and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grainding and polishing complete all as directed by Engr-In-Charge/GE.

M & L for sand cushioning/filling under gloors or laying interlocking tiles all as specified and directed

Machine pressed precast concrete interlocking paver blocks lacquor finish any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 grade with grey cement and pigment all as specified and as directed

Backing coat of cement mortar 10mm thick in 1:3 to receive tiles in vertical surfaces all as specified and as directed

Wall cladding colour designer tiles of size 300mmx600mmx7mm thick (shade as approved by GE) set and jointed in neat cement slurry and laid over screed bed/backing layer of 10mm thick in cement mortar and pointed in white/coloured cement to match the colour of tiles as on vertical surfaces such as dado/skirtings complete all as specified and directed.

50 mm thick PCC type BI 1:2:4 using 20mm graded crushed stone aggregate as in plinth protection laid in alternate pannels finished even and smooth without using extra cement complete all as specified and as directed.

Taking down aluminium door/window shutters form frame repair to shutter and frame and making good and serviciable and refixing to existing frame including fixing to rubber kit, handle, and similar items etc complete all as specified and as directed.

M&L in repair spot welding as in steel work such as window, door, ventilater, gate and santry post and similar work with running welding including greasing and oiling complete all as specified and directed

M & L for fixed in repairs stainless steel for gate/railling as in post or struts fixed independently or fixed in framed structure incuding welding, cutting and bending to shape as directed drilling holes etc. complete all as specified and directed

Taking down frames with shutters (without taking off shutters from the frame ) area not exc 1.5 Sqm Each incl iron mangery complete all as specified and as directed.

Taking down frames with shutters (without taking off shutters from the frame) area exc 1.5 Sqm but n.exc 4 Sqm Each incl iron mangery complete all as specified and as directed.

Taking down shutters of any description exc 1 sqm but n exc 2 sqm each complete all as specified and as directed.

Factory made 35mm thick 2nd class hard wood, plain framed, paneled shutters (two panels) with lock rail and panel of 9 mm BWP commercial ply or 12 mm veneered particle board with commercial veneering on both sides, the side of rail and stile as per IS-1003 (Part-I), kiln seasoned and chemically pressure treated, 35 mm thick complete, all as specified and directed by Engr-in-Charge/GE.

35 mm thick second class hard wood factory made Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc., (without sash bars) chamfered or rounded, fitted with cut and mitred beads for securing glass etc., sizes of members of shutters as specified in SSR Pt I Section 8, clause 8.24 (a) all as specified and as directed.

PVC moulded door frame of size 50x47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplying and fixing in opening as per specification and drawing all as directed

Factory made solid panel PVC door shutter 30 mm thick (style)consisting of frame made out of MS tubes for top and bottom rail. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail ; panelling of plain colour PVC sheet to be fitted in the M.S frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, suppling & fixing in the frame at site as per specification and drawing.

Steel window (box type) factory made with side hung shutters including pintol hinges, steel handles, steel peg stay and all locking arrangement complete with glazing bars dovetailed or welded including one shop coat of red oxide primer complete all specified. Note : i) The window shall be fabricated as per Drg No CEUZ/TD/1269/2008 Sheet 1/3 to 3/3 ii) MS fillets, glazing, wire gauge shall be measured and paid separately.

All as per Item No 59 aobve but wire gauge shutters complete all as specified and as directed.

Steel Ventilators with top hung/side hung shutter including hinges steel peg stay, complete all as specified and directed .

Butt hinges, 100 mm size extruded aluminium alloy with galvanised mild steel hinge pin, anodised complete all as specified and as directed.

100mm size mild Steel butt hinges medium weight cold rolled complete all as specified and as directed.

150mm long Aluminium anodised barrel tower bolt of extruded section complete all as specified and as directed.

150 mm length Aluminium handles fabricated type anodised complete all as specified and as directed.

Sheet glass 3mm thick ordinary quality and glazing with oil putty in square n.exc 0.5 Sqm in Each pane up to G+2 height bldg complete all as specified and as directed.

Sheet glass 4mm thick figured glass, pin headed type and glazing with oil putty or wooden beads not exceeding 0.5 Sqm in Each pane complete all as specified and as directed.

Hacking out old broken glass from metal frame, including cleaning and removing old putty clip etc and S&F of sheet glass 3mm thick ordinary quality and glazing with oil putty in square n.exc 0.5 Sqm in Each pane complete all as specified and as directed.

M&L in repair galvanised mild steel wire cloth 0.56 mm nominal dia of wire and awerage width of aperture 1.18 mm and fixed with tinned tacks complete all as specified and as directed.

S&F in repair 75mm long aluminium alloy handles, fabricated type, anodised (ISI Marked ) all as approved by Engg-in-charge/GE.

S&F 105 x 60mm pressed steel frames for doors with one or more rebate including necessary fixing lugs, hinges lock strike plate etc complete as specified including a coat of shop coat zinc chrome primer complete all as specified and as directed.

S&F in repairs for framed work such as grill, gratings, etc with ends of bars shouldered and/or riveted or forged in to spikes, framed guard bars, barred iron doors ladders framed balusters and similar work conforming to Fe 290 Gde E-165 all as specified and as directed.

Galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm complete all as specified and as directed.

Preparation of new wooden surfaces of any description ,not other wise described over 10 cm width or girth applying two coats of synthetic enamel paint over a coat of primers complete all as specified and as directed.

300 mm long aluminium alloy anodised sliding door bolt with hasp staple (bolt type ) and fixing clips of sheets ,cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed complete all as specified and as directed.

MS 300 mm ordinary rat rail rod pattern spring including roller and roller plate complete all as specified and as directed.

S&F floor door stoper (140mm length) of aluminium alloy body complete all as specified and as directed.

S&F in repairs for door closer hydraulically regulated, designation no 2 universal type suitable for door shutter of 701 to 850 mm in width and of weight between 36 to 60 kg Aluminium (extruded section) body complete all as specified and as directed.

Powder coated Anodised Aluminium frames for doors, windows, ventilators with one or more rebates including jointing cleats for fixing etc complete all as specified and directed.

Powder coated aluminium anodised window and ventilator shutters, side hung type without sash bar, aluminium section weighing 0.55 kg/m including necessary jointing cleat glazing clips, rubber packing, anodised aluminium snap beading screws etc. complete all as specified and directed.

Powder coated aluminium anodised door shutters, aluminium section weighing 0.55 kg/m including necessary jointing cleat glazing clips, rubber packing, anodised aluminium snap beading screws etc. complete all as specified and directed.

M&L in Repairs for prelaminated particle board of 18/19mm thick interior grade prelaminated one side with decorative choice lamination & other side balancing white lamination fixed with timber frame work of cupboards book cases etc complete all as specified and as directed.

S&F in repairs 18/19mm thick block board, grade 2 quality, interior grade, commercial type fixed with screws to timber frame work/iron frame work (Termite treated / water proof) complete all as specified and as directed.

2nd class HW plain fillets squre ,rectangular or triangular in section clean sawn ,secured with nails or brads exc 3 sq cm but n exc 6 sqcm complete all as specified and as directed.

0.9 mm thick decorative choice of lamination type -1 of surface finish , colour and pattern as approved adhesive as per manufacturers instructions complete all as specified and as directed.

Hasp & staple 100mm size aluminium anodised fixed with screws complete all as specified and as directed.

Continous (Piano) hinges , mild steel, bright finished or electrogalvanised width of flaps in 30mm complete all as specified and as directed.

40mm dia cupboard knobs fixed with nuts screws and washers of brass polished of approved quality complete all as specified and as directed.

S&F in repair stain less steel catcher of superior qualityall as specified and directed by Engr in charge/GE.

S&F in repair 50mm stain less steel pivoted type hinges of superior quality and directed by Engr in charge/GE.

M & L in repaiors Steel rolling shutters 1.25mm thick, with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete: push pull or manual type complete all as specified and as directed.

Brass mortice lock, vertical type, size 100 mm, 4 leaver complete all as specified and as directed.

S&F in repairs sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratary with plugs washer and wastes including bedding in cement mortar to drawf wall or including fixing cantiliver brackets and connecting union to pipes overall size 915 mm x 460 mm bowl size 410 mm x 330 mm x 160 mm complete all as specified and as directed.

S&F in repairs water closet wall mounted pattern pattern colour 535 x 380 x 400mm (as approved by Engineer-in-charge) Make CERA CAT PART No (S1041109 P trap,) , Seat cover B1510108 Clair seat cover, complete all as specified and as directed.

S&F in repairs WHB coloured 550MMX480MM with Pedestal Make CERA Cat No (S2040115 & S2090111) (as approved by Engineer-in-charge complete all as specified and as directed.

S&F in repairs 15mm bore centre hole basin mixer with round spout with 450mm long copper pipes and brass nuts with out Pop up Make: Cat No CON 167KNB and equvalent.

S&F in repairs 15mm bore long body Bib tap Make:Cat No CON-037KN and equvalent complete all as specified and as directed.

S&F in repairs 15mm bore Bib tap Make: Cat No CON 107KN and equvalent in CERA.

S&F in repairs 15mm bore angular stop cock with wall flange Make: Cat No CON- 059KN and equvalent.

S&F in repairs health faucet ABS body with wall hook and 1 mtr chrome plated PVC hose pipe Make : Cat No F8030103.

S&F in repairs chromium plated toilet paper holder make Jaquar at No ACN 1153N and equvalent in CERA.

S&F in repairs Glass shelf with chromium plated guard rails Make: Cat No ACN-1171N and equvalent.

S&F in repairs 600mm long brass chromium plated towel rail fancy type make: Cat No ACN-1111NM and equvalent.

S&F in repairs soap dish Make Cat No ACN 1131N and equvalent.

S&F in repairs towel rack Make: CAT NO ACN 1181FN and equvalent.

S&F in repairs Double Coat hook cat No ACN 1161N and equvalent.

S&F in repair rotational moulded polyethylene water storage tanks 500 ltrs(cylindlerical verrtical with closed top) hoisted and fixed in position all as specified in SSR part I inclding dismantaling of existing damaged water tanks complete all as specified and as directed.

S&F in repair rotational moulded polyethylene water storage tanks 1000 ltrs(cylindlerical verrtical with closed top) hoisted and fixed in position all as specified in SSR part I inclding dismantaling of existing damaged water tanks.

PTMT ball valves 20 mm dia high pressure with epoxy coated aluminium rod and high denscity plastic ball screwed for iron pipes(Min weight 210 gms) and fixed to iron pipes complete all as specified and as directed.

S&F in repair PTMT ball valves 20 mm dia high pressure with epoxy coated aluminium rod and high denscity plastic ball screwed for iron pipes (Min weight 210 gms)and fixed to iron pipes complete all as specified and as directed.

S&F in repairs Gun metal globe or gate valves high pressure with polythene float and fly nut complete screwed for iron pipe or for unions of 20 mm bore and complete all as specified and directed.

Taking up or down of 15 mm bore pipes steel tubing and connections complete all as specified and directed.

Steel tubing galvanized, medium grade with all fittings, laid in floors or fixed to walls,15mm bore.including taking down old pipe complete all as specified and as directed.

Steel tubing galvanized, medium grade with all fittings, laid in floors or fixed to walls, 20mm bore.including taking down old pipe complete all as specified and as directed.

Refixing 15 mm bore old steel water tubing medium grade galvanised and connections in new or old position (walls, ceiling, floor etc.) complete all as specified and as directed.

Refixing 20 mm bore old steel water tubing medium grade galvanised and connections in new or old position (walls, ceiling, floor etc.) complete all as specified and as directed.

S&F in repair 40 mm waste coupling of PTMT ( half or full threaded) (Min weight 60 gms) all as specified and directed.

S&F in repairs 40 mm dia PVC waste pipe for sink and wash hand basin of pressure rating 10 kgf/Sqm complete all as specified and as directed.

S&F in repairs PVC (SWR) Floor trap, 75 mm dia of outlet, plain with grating including jointing with solvent cement including removing old trap and making good. All as directed by Engr-in-charge.

110 Bore PVC (SWR) Pipes in repairs single socketed in any lenth with rubber ring joints fixed to walls complete all as specified and directed..

75 mm Bore PVC ( SWR) Pipes in repairs single socketed in any lenth with rubber ring joints fixed to wall complete all as specified and directed..

PVC (SWR) bends any radius 75 mm bore complete all as specified and directed..

PVC (SWR) bends any radius 110 mm bore complete all as specified and directed..

S&F in repairs PVC connection 15mm dia and 45cm long with two Nos of PTMT checknuts and washers complete all as specified and as directed.

S&F in repairs PVC bathroom cabinet mirror 450 x 350 mm (Prayag Cat No 557) with door fitted with looking mirror. all as directed by Engr-in-charge/GE.

Supply and fixing in repairs vitreous china squatting pan,Orrisa pattern of size 580mmx440mmwhite with integral foot rests excluding flushihng cistertn and flush pipe complete all as specified and as directed.

S&F in repair Vitreous china ware wash down water closet pan, (pedestal pattern) coloured including connection to drain and to flushing pipe, anti syphonage pipe complete all as specified and as directed.

S&F in repair WHB vitreous china (flat back or angle back type ) any size ,including cutting for pinning in ends size 550x400 mm including brackets ,32 mm CP waste fittings coupling ,connection pipe 450mm long and 15mm dia CP piller taps fancy type complete all as specified and as directed.

S&F in repairs10 ltrs capacity PVC valveless syphonic action type flushing cistern low level with inlet ball valve float and handle complete all as specified and as directed.

S&F in repair vitreous china bowl urinal flat back, size 465x355x265 mm white (min) with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) complete all as specified and as directed.

S&F in repairs Plastic water closet seat, black or white closed pattern, solid type with flat bottom, and cover and mild steel chromium plated hinging device (Make CERA ) any type of EWC .complete all as specified and as directed.

S&F in repair 15mm pillar tap cast copper alloy with capstan head ,chromium plated screwed down high presure with or with out lettered fixed with iron pipe complete all as specified and as directed.

S & F in repair 15mm stop valves cast copper alloy chromium plated with long shank (concealed), screwed both ends for iron pipe complete all as specified and as directed.

S & F in repair bib taps cast copper alloy with crutch or butter fly handle screwed for iron pipe of dia 15mm fixed complete all as specified and as directed.

S&F in repair CP bib taps disc fitting face half turn or full turn suitable for bib taps and similar work complete all as specified and as directed.

S&F in repairs 20mm dia mild steel powder coated tubular curtain rail with brackets all as directed by Engr-in-Charge/GE.

S&f in repairs to PVC water tank cover 500 ltr to 1000 ltrs approval quality all as directed by Engr -in -charge/GE.

Dismantling of wall and ceiling boards (fibre pulp insulation etc) or insulation boards / slabs /blankets any thickness, including cover fillets complete all as specified and as directed.

Providing false ceiling GI frame work for seamless ceiling comprising of GI perimerter channel 0.55 mm thick with two unwqual flages of 20 to 30 mm and web of 27 mm fixed to surrounding wall using screws at 452 mm C/C channel 0.9 mm thick having two wqual flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm C/c with GI cleat and steel expansion or sutable hanging from soffits\trusses\bracking supporting hanger compressing of GI wire .complete all as sepcified and directed by Engr-In-Charge/GE.

4 mm thick 600x600mm size asbestos cement plain E-boards designer ceiling (Make; Everest of equvalent) ,fixed to GI grid work with screws and applying new surfaces two coat of distempers and one coat of primers complete all as specified and as directed.

10-12mm thick gypsum boards seemess false ceiling as in ceiling plain, moisture resistant, including GI hanging wires & frames with intermediate, perimeter channel ceiling channel, along nuts and bolts connecting plates gypsum boards, dry wall screws soffits cleats, ceiling section, rowel plugs fixtures and screws and applying two coats of emulsion paint over a coat primer on exposed surface, complete all as specified and as directed by Engr-in-Charge/GE. Note : (a) Design of ceiling board as approved by Engr -in- Charge. (b) GI grid/hanging system shall be of the same make as of false ceiling manufacturer.

Rolled Mild steel sections as in frame work for fire point structure with hook, main and cross beams hip and jack rafters, purlines fixed independently and similar work including welding all as specified and directec by Engr-in-charge/GE.

2mm thick fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with coach screw and washer in roof, wall etc. complete all as specified and directed.

Roughening surfaces of old concrete surfaces by picking up, sweeping, cleaning and washing down with water to remove dust etc including taking down tarfelt and brushing neat cement slurry @ 3 kg/Sqm including 10mm thick plastering in CM (1:3) finished even and smooth mixed with water proofing compound (WPC shall be measured and paid separately). Applying bituminous primer on roof surfaces @ 0.40 ltr/Sqm and applying one coat of hot blown bitumen of grade 85/25 @ 1.20 Kg/Sqm and provide modified polymeric five layred APP (Atactic Polypropylene) Modified Polymeric Membrane with 100 micron high molecular high density polyethylene film. Min wt of membrane will be 3.5 Kg/Sqm and bonded completely to the surfaces with min end overlap of 15 cms and side lap 75 mm (overlaps to be bounded with thermo fused by flame) and over APP applying one coat of hot blown bitument 85/25 @ 1.2 Kg/Sqm blinded with fine sand in dry condition @ 0.5 Kg/Sqm & including two coats of bituminous Aluminium paint, complete all as specified and as directed by Engr-in- Charge.

Supply only integral water proofing compound complete all as specified and as directed.

PCC 1:2:4 type B1 using 20mm graded aggregate as in PCC filling in MS chowkhat & base of water tank on roof surface complete all as specified and as directed.

Demolition of cement concrete reinforced (reinforcement cut as required to facilitate demolition) complete all as specified and as directed.

Precast cement concrete louvres and jallies 45-50mm thick set in cement mortar 1:6 type B0 (1:2:4 using 12.5mm graded aggregate etc sample as approved by GE incl taking out old precast jali. complete all as specified and directed by Engr-In-Charge/GE.

Precast cement concrete jallies size 300mm x 300mm x 25-30 mm thick set in cement mortar 1:4 type B0 (1:2:4 using 12.5mm graded aggregate etc fixed between precast pillars size 75mm x 75mm x 300 mm height,sample as approved by GE incl takong out old precast jali. complete all as specified and directed by Engr-In-Charge/GE.

Precast cement concrete jallies size 300mm x 450mm 25-30 mm thick set in cement mortar 1:4 type B0 (1:2:4 using 12.5mm graded aggregate etc fixed between precast pillars size 75mm x 75mm x 450 mm height, sample as approved by GE incl takong out old precast jali. complete all as specified and directed by Engr-In-Charge/GE.

Precast reinforced cement concrete (1:2:4) type B-1 (using 20mm graded stone aggregate ) for drain cover and other covers etc including necessary form work and set in CM (1:4). (Note:- reinforcement will be measured and paid seperately.)

Mild TMT bar 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for colums,hooking ends, and including mild steel wire not less than 0.9mm dia or securing with clips quality conforming to, TMT bars.

6mm to 8 mm thick solid pvc lining / pannelling fixed with rowel screws fixed over PVC slits grid of 5 mm thick fixed over wall so as to provide base for overleaping of lining and sealing the same at top and bottom if reqd at site as per directions of Eng-in-charge/GE.

S & F in repairs Aluminium body heavy duty double action floor spring of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other part made of mild steel , mad suitable for glass shutter at both side rotable complete all as specified and as directed.

M & L for preparation of old steel surfaces and applying one coats of synthetic enamel paint on walls and roof of hangers in camoflageing pattern all as specified and as directed.

Taking down carefully, copper/ aluminum point wiring (light, fan, socket or power) complete including fitting such as switch, sockets, ceiling rose, pendants socket,fan regulators any type, rectangular board ,light fittings,terminal boxes etc removing materials for taking credit and making good disturbed surfaces of walls floors and ceiling complete all as specified and as directed.

Taking down carefully copper/aluminium sub main wiring of size 2.5/4/6 sqmm from surface/concealed at any height and removing the materials from site and making good the disturbed surfaces of walls,floors roofs etc complete all as specified and directed.

Taking down Old/ Unserviceable MCCB/MCB DBs TPN / Main Switches by disconnection of electric connection including old unsv MCCBs,MCBs, isolators etc and making good to distrubed surface complete all as specified and directed.

Point wiring for one light/ fan/bell point controlled by one switch using 1.5 Sq mm FRLS copper conductor cables (multistanded) PVC insulated and unseathed in and including PVC concealed conduit as per site requirement (thickness not less than 1.5mm and 20mm dia), medium grade with Modular sunken boxes & PVC back plate for mounting modular type switches, sockets & regulators etc with front plate modular type including supplying and laying PVC insulated unsheathed 1100 volts coppper conductor cable 1.5 Sq mm as earth wire stranded and conected to earth dolly as specified.Note:- Cutting and making same the wall patchs after laying the wire and conduit using putty, white wash and distamper. The surface should be made smooth using putty and should match exactly with the existing wall finish complete all as specified and as directed.

All as per srl item No 161 but for 3 pin 6 Amps socket outlet independent board including PVC insulated PVC unsheathed 1.5 sq mm earth wire and connected to earth dolly complete all as specified and as directed.

All as per srl item No 161 but for 3 pin 6 Amps socket outlet on the same board including PVC insulated PVC unsheathed 1.5 sq mm earth wire and connected to earth dolly complete all as specified and as directed.

All as per Srl item No 161 but for 3 Pin 16 Amps socket outlet independent board with cable 2.5 Sq mm including copper PVC insulated PVC unsheathed 1.5 sq mm earth wire standard and connected to earth dolly complete all as specified and as directed.

Modular switch 6 Amps single pole one way 230 V, 50 Hz, AC , with outer strip complete all as specified and directed by Engr In charge/GE.

Modular switch 16 Amps single pole one way 230 V, 50 Hz, AC , with outer strip complete all as specified and directed by Engr In charge/GE.

Modular socket 3 Pin 6 Amps flush type 230 V, 50 Hz, AC , with outer/inner cover complete all as specified and directed by Engr In charge/GE.

Modular socket combined 2-in-1, 6 Pin 6 & 16 Amps 230 V, 50 Hz, AC , flush type with outer/inner cover complete all as specified and directed by Engr In charge/GE.

Ceiling rose, surface bakelite 65x 50mm two to three terminals fixed on PVC Round Blockcomplete all as specified and directed by Engr In charge/GE.

S & F in replacement calling Bell ding dong 230 volts single pole 50Hz complete all as specified and directed by Engr In charge/GE

Electronic step type fan regulator 120 watt 230 volts 50Hz two module C/S deluxe type complete all as specified and directed/GE.

Sub main wiring with two single core PVC insulated with copper conductor cable stranded of size 10 Sqmm in PVC concealed conduit /casing capping 25mm dia including PVC insulated copper conductor cable 6 Sq mm as earth lead complete all as specified and as directed.

Sub main wiring with two single core PVC insulated with copper conductor cable stranded of size 6 Sqmm in PVC concealed conduit /casing capping 25mm dia including PVC insulated copper conductor cable 6 Sq mm as earth lead complete all as specified and as directed.

Sub main wiring with two single core PVC insulated with copper conductor cable stranded of size 4 Sqmm in PVC concealed conduit/casing capping 25mm dia including PVC insulated copper conductor cable 4 Sq mm as earth lead complete all as specified and as directed.

Sub main wiring with two single core PVC insulated with copper conductor cable stranded of size 2.5 Sqmm in PVC concealed conduit/casing capping 25mm dia including PVC insulated copper conductor cable 1.5 Sq mm as earth complete all as specified and as directed.

Sheet metal enclosure double door type for MCCB TPN DB upto 125 Amps, 4 way vertical type 415 volts with 400 Amps rated busbar and neutral link , chases wall for fixing DB and making good distributed wall surfaces to match with existing specification complete all as specified and directed.

Sheet metal enclosure double door type for MCB TPN DB upto 4 way vertical type 415 volts with 400 Amps rated busbar and neutral link , chases wall for fixing DB and making good distributed wall surfaces to match with existing specification complete all as specified and directed.

Sheet metal enclosure double door type for DBs (when MCB to be used) Single pole & neutral 12 way 240 volts with 200 Amps rated busbar and neutral link including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification complete all as specified and directed.

Sheet metal enclosure double door type for DBs (when MCB to be used) Single pole & neutral 8 way 240 volts with 200 Amps rated busbar and neutral link including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification complete all as specified and directed.

Sheet metal enclosure double door type for DBs (when MCB to be used) Single pole & neutral 4 way 240 volts with 200 Amps rated busbar and neutral link including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification complete all as specified and directed.

S & F in replacement MCCB Three Pole & Neutral capacity of 125 amps 415 volts rupturing capacity 16 KA complete all as specified and directed.

S & F in replacement MCB Single pole and neutral 240 volt any rating from 40 amps"C" series, with rupturing capacity 10 KA ,inculding providing thimble for out going cable complete all as specified and directed.

S & F in replacement MCB single pole 240 volt any rating from 10 to 40 amps "C" series, with rupturing capacity 10 KA ,inculding providing thimble for out going cable complete all as specified and directed.

S & F in replacement MCB single pole and neutral 240 volt any rating from 63 Amps "C" series, with rupturing capacity 10 KA ,inculding providing thimble for out going cable complete all as specified and directed.

S & F in replacement MCB TPN 415 volt any rating from 63 Amps "C" series, with rupturing capacity 10 KA ,inculding providing thimble for out going cable complete all as specified and directed.

S & F in replacement MCB TPN 415 volt any rating from 100 Amps "C" series, with rupturing capacity 10 KA ,inculding providing thimble for out going cable complete all as specified and directed.

S & F in replacement Sheet metal enclosure single pole and neutral with a two pin and earth plug and socket complete with one single pole MCB 240 Volts 20 Amps nicluding taking down of old one comlete all as directed by Engr-in-cahrge/GE.

S & F in repairsLED bulb 5/12/20 watt white/ warm white Base2 Cap B22/E27 light fitting 6500K /2700K(White/yellow) with all necessary fixing arrengement complete all as directed by Engr-in-charge/GE.

S & F in repairs LED lamp 0.5 Watt Safelite white/ warm white Yellow/Green/Red Base Cap B22 for engagement lights with all necessary fixing arrengement complete all as directed by Engr-in-charge/GE.

S & F in repairs Electronic LED panel driver/ adoptor with universal connector for easy installations to light fittings suitable for 15/18/24W, 230 Volt ,AC complete all as specified and directed.

S & F in repairs PVC Casing Caping of Size upto 25 mm and 12 mm including all connected accessories (Nail, Tee, Albow etc).

S & F in repairs fan Capacitor 2.5/3.15mfd AC, 230 volt complete all as specified and directed by Engr-in-charge/GE.

S & F in repairs LED lights fitting 1x 10W, 230V,AC white/ warm white decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed.

S & F in repairs LED lights fitting 1x 20W, 230V,AC white/ warm white decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed.

S & F in repairs LED building security light fitting 30 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp,clamps,suitable bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and as directed.

S & F in repairs LED wall mounting mirror type white/ warm white pitcture light fitting with high out put diffuser 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with flexible copper conductor cable of suitable size complete all as specified and as directed.

S & F in repairs LED decorative down light fitting/recess mounted round type white/ warm white with high out put diffuser 8 watt 220 V AC with driver holder and LED lamp including connecting up with flexible copper conductor cable of suitable size complete all as specified and as directed.

S & F in repairs LED decorative surface mounted light fitting round/square type white/ warm white with high out put diffuser 18 watt 220 V AC with driver holder and LED lamp including connecting up with flexible copper conductor cable of suitable size complete all as specified and as directed.

S & F in repairs LED panel decorative down light fitting/recess mounted square type white/ warm white 2X2 36W with high out put diffuser 220 V AC with driver holder and LED lamp including connecting up with flexible copper conductor cable of suitable size complete all as specified and as directed.

S & F in repairs LED Decorative, STYLO wall mounting, champagne gold finish fixture with plastic body suitable for 9 W LeD lamp B22 base.with driver holder and LED lamp including connecting up with flexible copper conductor cable of suitable size complete all as specified and as directed.

S & F in repairs metal clad plug and socket for AC plug and geysers complete all as specified and directed/GE.

GI tubing light grade 40 mm dia along the wall/ in trenches/ in duct / in culvert /road crossing and including provisioning of suitable mild steel flat iron clamps and bolts, nuts and double washers etc for holdining of GI pipe alongwith poles all as specified and directed.

S & F in repairs Switch - socket combination 5 Amps, 5 pin multipurpose with PVC Box, 4 holes complete all as specified and directed.

S & F in repairs Switch - socket combination 15 Amps, 6 pin multipurpose with PVC Box, 4 Holes complete all as specified and directed.

M/S ASHOK KUMAR PACHIALA (BID ID -3121938)

SINGH CONST CO (BID ID -3125434)