Repair /Renovation of Girls Hostel Muthi Jammu by way of roof treatment and pre fabricated hall.

Amount

Earth work in bulk excavation by manual means over areas (exceeding 30 cm indepth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge. All kinds of soil :

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) Including carriage

Centering and shuttering including strutting, propping etc. and removal of form for: Foundation,Plinth Beam, footing bases of column , suspended floor

Centering and shuttering including strutting, propping etc. and removal of form for: Suspended floor roofs landing balconies

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)Including carriage

Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 5.3.1 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)Including carriage

Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete. (Thermo- Mechanically treated bars.) Including carriage

Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in :Cement mortar 1:4 ( 1 cement : 4 coarse sand)Including carriage .

CEMENT PLASTER (IN FINE SAND) 15mm Cement plaster of mix:1 : 4 ( 1 cement : 4 fine sand) Including carriage

CEMENT PLASTER (IN FINE SAND) 12mm Cement plaster of mix:1 : 4 ( 1 cement : 4 fine sand) Including carriage

Providing and applying Plaster of Paris putty of 2mm thickness over plastered surface to prepare the surface even and smooth complete

Wall Painting with acrylic emulsion paint of approved brand and manufacture to give an even shade. Two or more coats on new work

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete Size of tile 600x600 mm Including carriage

Providing and fixing aluminum work for doors, windows, ventilators andpartitions with extruded built up standard tubular sections/appropriate Zsections and other sections of approved make conforming to IS: 733 andIS: 1285, fixed with dash fastener of required dia. and size includingnecessary filling up of gaps at junctions i.e, at top, bottom and sides withrequired EPDM rubber / neoprene gasket felt etc. Aluminum sectionsshall be smooth, rust free, straight, mitred and jointed mechanicallywherever required including cleat angle, Aluminum snap beading forglazing / panelling, C.P. brass / stainless steel screws, all complete as perarchitectural drawings and the directions of Engineer-in-Charge (glazing, panelling and dash fasteners to be paid for separately.)Powder coated aluminum (minimum thickness of powder coated 50 microns)

Providing and fixing aluminium work For Shutter of doors ,windows and ventilators including P/F hinges/Pivots and fixing of fittings wherewver required including cost of EPDM rubber/ neoprene gasket as required , Powder coated aluminum (minimum thickness of powder coated 50 microns)

Providing and fixing glass panes with putty and glazing clips in steel doors,windows, clerestory windows, all complete with : 5.0mm thick glass panes

Providing and fixing Anodized aluminum grill (Anodized transparent ordyed to required shade according to IS: 1868 minimum anodic coating ofGrade AC 15) of approved design/pattern, with approved standardsection and fixed to the existing windows frame with C.P. brass/stainlesssteel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixingapproved Anodized aluminum standard section around the opening, allcomplete as epr requirement and direction of Engineer-in-charge. (onlyweight of grill to be measured for payment)

Providing and laying water proofing treatment on roofs of slabs byapplying cement slurry mixed with water proofing cement compoundconsisting of applying :(a) after surface preparation, first layer of slurry of cement @ 0.488kg/sqm mixed with water proofing cement compound@ 0.253 kg/sqm.(b) laying second layer of Fibre glass cloth when the first layer is still green. Overlaps of joints of fibre cloth should not be less than 10 cm.(c) third layer of 1.5 mm thickness consisting of slurry of cement @1.289 kg/sqm mixed with water proofing cement compound @ 0.670kg./sqm. and coarse sand @1.289 kg/sqm. This will be allowed to aircure for 4 hours followed by water curing for 48 hours.The entire treatment will be taken upto 30cm on parapet wall and tuckedinto groove in parapet all around.(d) fourth and final layer of brick tiling with cement mortar (which willbe paid for separately)For the purpose of measurement the entire treated surface will bemeasured

Regrading terracing of mud phaska covered with tiles or bricks, in cement by dismantling tiles or bricks, removing mud plaster, preparing the surface of mud phaska to proper slope, relaying mud plaster gobri leaping and tiles or bricks, grouted in cement mortar 1:3 (1 cement: 3 fine sand), including replacing unserviceable tiles or bricks with new ones and disposal of unserviceable material to the dumping ground (the cost of the new tiles or brick excluded) within 50 meters lead.

Manufacturing supply and errection of Pre-febricated steel rectangular hollow sections with fuff insulated panels for walls and roof of building mentioned in the drawings . The panels shall be inserted one byone into U shaped ground track of size 52.5x55x52 mm and 0.63 mm thick made of, G.I sheet/Steel coil. The The height upto ceiling should be 11.5 ft with columns, trusses,purlins and rafters with necessary fixing arrangement wall cladding made withdouble skin puff insulated 50 mm thick ,0.5 mm thick precoated sheet at both sides of the panel fitted with puff of high density of 40 kg/m3, 30 mm puff panel in roof with 0.5 mmm thick PPGI sheet with density 40 kg/m3 and quality ( Sintex /Lsollyd/jindal/bnal/Rinac or equivalent)make , false ceiling of calcium silicate tiles over frame work of MS channels (Aluminium Powder Coated) Doors & Windows of Aluminium 3mm thickness for frame & 2 mm for shutters with 5 mmm thick glass panes. ( including flush mouldings in corners) Aluminium grill to window openings and wire gaugze) along with foundation bolts as per drawing and specification complete job including electrification using quality product ( anchor/havels or equivilant) and one no. AC of 3ton capacity for each room with complete acessories of approved make complete with quality workmanship incliding design/drawing dully vetted from any recognozed govt institute ( complete Job) Including carriage.

Providing and Fixing of 1.5ton Split AC

Providing and Fixing AC transformer

Providing and fixing panelled or panelled and glazed shutters for doors,windows and clerestory windows fixing with butt hinges of required size withnecessary screws, excluding panelling which will be paid for separately, allcomplete as per direction of Engineer-in-charge. (Note: -Butt hinges andnecessary screws shall be paid separately).Second class deodar wood

Providing and fixing panelling or panelling and glazing in panelled or panelledand glazed shutters for doors, windows and clerestory windows (Area ofopening for panel inserts excluding portion inside grooves or rebates to bemeasured). Panelling for panelled or panelled and glazed shutters 25 mm to 40mm thick. : 12 mm thick Marine plywood conforming to IS: 710

P/F of 5.0 mm thick glass pane (weighing not less than 12.50 kg/sqm)

Dismantling doors, windows and clerestory windows (steel or wood)shutter including chowkhats, architrave, holdfasts etc. complete andstacking within 50 meters lead : Of area of 3 sqm. and below ( including disposal )

Demolishing brick work manually/by mechanical means including stacking of serviceable material and disposal of unserviceable materialwithin 50 meters lead as per direction of Engineer-in-charge:In cement mortar ( including disposal )

Dismantling tile work in floors and roofs laid in cement mortar includingstacking material within 50 meters lead. For thickness of tiles above 25 mm and upto 40 mm ( including disposal )

Demolishing cement concrete manually/by mechanical means includingdisposal of material within 50 meters lead or as per direction of Engineer-incharge: 1:3:6 or richer mix (i/c equivalent design mix) ( including disposal )

SHUBHOM PREFABS AND ASSOCIATES