Rehabilitation of existing infrastructure at Ghaggar at Khannauri and Ghaggar at Chandu

Amount

(A) Estimate for Flood control room , khanouri Providing and laying Cement concrete GRADE M-10(1:3:6 ) with stone ballast or shingle including Supply, carriage, loading and unloading of material from approved quarry, complete in all respect (10.11(ii))

Providing and laying vitrified floor tiles of 600 x600 mm size in light colour shades made using Double Charge technology (thickness to be specified by the manufacturer) with water absorption’s less than 0.08% and conforming to IS : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement: 4 fine sand), complete. ( Design is homogenous throughout the tile body ).(14.113(a))

Providing and fixing 1st quality ceramic glazed wall tiles Matt/Semi Matt/Glosy/Highly Gloss finish/Highlighter/emboss conforming to IS : 15622 (thickness to be specified by the manufacture of approved make in all colours, shades except burgundy, bottle green, black of size 200 x 300 mm, 100x200mm, 200x200mm as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:4 (1 cement: 4 fine sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete.(14.125)

Dismentling plain Cement Concrete 1:2:4 (8.6(d))

Earth work in excavation in foundations trenches etc. in all kinds of soil where Pick-Jumper work is not involved and not exceeding 2.0 metres depth including dressing of bottom and sides of trenches, stacking the excavated soil clear from the edge of excavation and subsequent filling around masonry in 15 cm, layers with compaction including disposal of all surplus soil as directed within lead of 30 metres.(6.6)

Providing and laying Rectified Porcelin floor tiles 400x400mm or more (thickness to be specified by the manufacturer) of premium quality conforming to IS:15622 of approved make in all colours laid on 20mm thick bed of Cement Mortar 1:4 ( 1 Cement : 4 Fine sand) for new flooring or laid with cement based high polymer modified quick set tile adhesive (water based) of approved make IS 15477 marked using 5 Kg adhesive per Sqm of tile area in average 3mm thickness over existing floor, including pointing the joints with white cement and matching pigments etc., complete (14.123)

Providing and fixing 1st quality ceramic glazed wall tiles Matt/Semi Matt/Glosy/Highly Gloss finish/Highlighter/emboss conforming to IS : 15622 (thickness to be specified by the manufacture of approved make in all colours, shades except burgundy, bottle green, black of size 600 x 300 mm as approved by Engineer-in?Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:4 (1 cement: 4 fine sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete.(14.128)

Black Granite stone tiles 15mm to 20mm thick in skirting, risers of steps, dado walls and pillars laid in 12.5mm thick cement mortar 1:3 (1 cement 3 coarse sand) and jointed with neat cement slurry mixed with pigment to match the shade of stone, including rubbing and polishing including labour for fixing dowel pins and ramps (14.87)

Removing Doors and Windows (Steel or wood) with chowkhats by making recesses in walls when the wall is not to be dismantled doors of area less than 3 sqm and below (8.26(a))

Supply & Fixing of pressed steel frames (Chowkats) consisting of 18 gauge (1.25mm) thick steel sheet of the specified section(standard design latest) including iron lugs (hold fasts) iron hinges, confirming to P.W.D. specifications including bolts for fixing stops, locknotch provision for receiving tower bolts, Hydraulic spring and finished with one priming coat of approved quality, fixed in position, including the cost of cement concrete 1:3:6 for filling in the frame and cement concrete 1:2:4 for lugs complete Doors and windows frame of size 151mm x 60mm with 35 mm wide double rebate weighing 3.95 kg per meter. (18.24(c))

Supply & Fixing of pressed steel frames (Chowkats) consisting of 18 gauge (1.25mm) thick steel sheet of the specified section(standard design latest) including iron lugs (hold fasts) iron hinges, confirming to P.W.D. specifications including bolts for fixing stops, locknotch provision for receiving tower bolts, Hydraulic spring and finished with one priming coat of approved quality, fixed in position, including the cost of cement concrete 1:3:6 for filling in the frame and cement concrete 1:2:4 for lugs complete Doors and windows frame of size 113 mm x 60 mm with 35 mm wide single rebate weighing 3.95 kg per meter. (18.24(b))

Deodar wood doors shutter with 12mm thick phenol Bonded BWP ply (Anchor Kit ply, Nova teak , or National or any other ISI approved quality) I/C hinges, screws, chocks & cords etc. Complete fixed in position (Single leaf) Phenol Bonded Ply Panel 35 mm thick complete in all respects. (17.10(ix) (a)(ii)

Labour charges for Deodar wood doors shutter with 12mm thick phenol Bonded BWP ply (Anchor Kit ply, Nova teak , or National or any other ISI approved quality) I/C hinges, screws, chocks & cords etc. Complete fixed in position (Single leaf) Phenol Bonded Ply Panel 35 mm thick complete in all respects. (17.10(ix) (a)(ii)

Fixing of Wire gauze deodar wood door shutter without springs housed in chowkats (Single Leaf) 35 mm thick (17.11 (i)(a))

Dismantling brickwork tile masonry or tile lining in cement complete in all respect (8.5(b))

First class burnt brick work laid in Cement Sand Mortar 1:5 in first storey upto 4 meters above plinth level (11.6)

Cement pointing 1:3 deep variety complete in all respect (15.60)

Scraping cement plaster complete in all respect (8.31 ©

12.5mm thick Cement plaster 1:4 ratio including supply, carriage, loading and unloading from an approved quarry, complete in all respect (15.9)

Dismantling sanitary fixtures such as European/Indian/Orissa W.C. PVC china ware cistern, Wash Hand Basin, Urinal pot, sinks and C.P. fittings and disposal of dismantled material with a distance of 100 mtr. Complete in all respect as required by Engineer-in-charge. European/ Indian/Orissa W.C. (30.88(a))

Dismantling sanitary fixtures such as European/Indian/Orissa W.C. PVC china ware cistern, Wash Hand Basin, Urinal pot, sinks and C.P. fittings and disposal of dismantled material with a distance of 100 mtr. Complete in all respect as required by Engineer-in-charge. Wash Hand Basin/ Uniral Pot. (30.88(c))

Providing and fixing in position Chinaware European type water closet P trap or S trap (to the approval of the Engineer-in-charge) suite- consisting of 10 ltr. PVC flushing cistern supported on angle iron bracket, short bend 32 mm dia including cost of solid white cover complete in all respect and to the entire satisfaction of engineer in charge (30.4)

Providing and fixing Stainless steel health faucet complete in all respect (30.24)

Providing and fixing in position CP brass grab bar of approved make (to the approval of Engineer-in-charge) fixed into wall with brass screws complete in all respect size 450 mm. (30.12)

Extra for providing and fixing PVC waste pipe 32 mm complete in all respect. (30.20)

Providing and fixing in position gully traps fixed in cement concrete 1:4:8 complete with Grating 150mm x 150mm, cover and frame clear opening 300mm x 300mm and out of side size 330mm x 330mm and chamber including cost of all bricks work in cement mortar 1:5 cement concrete 1:2:4 in coping around cover and frame etc. with three coats of black bitumastic superior paint of approved manufacture on all C.I. work as per standard design minimum depth of water should be 150 mm with a minimum seal 50mm. 100mm internal Diametre S.W.gully trap with H.C.I. grating and cast iron cover weighing approximately 7.26 kg. and frame clear opening 300mm x 300mm and out of side size 330mm x 330mm (30.99(a))

Providing and fixing in position SWR UPVC special for soil waste vent or anti syphonage pipes as per as per IS - 14735 of approved make (to the approval of Engineer-in-charge) including cutting and wastage etc. cutting holes in walls, roofs or floors etc. and making good to its original condition but excluding cost of lead joining 110mm i/d P trap/floor trap110 mm x 110 mm (30.81(iii)(B)(ix))

Providing and fixing in position S.S. Grating with frame of approved make (to the approval of Engineer-in-charge) complete in all respect (30.80)

Providing and fixing 15 mm C.P. brass laboratory cock swan neck one way tap of approved make (to the approval of Engineer-in-charge) complete in all respect (30.68(a))

Providing and fixing in position stop cock / angle valve C.P. brass 15 mm angle valve without flange of approved make (to the approval of Engineer-in-charge) complete in all respect (30.66(c))

Providing and fixing in position 15 mm i/d bib cock long nose/ long body without flange of approved make (to the approval of Engineer-in-charge) complete in all respect (30.65(A)(i))

Providing and fixing in position C.P. brass flange dome of approved make (to the approval of Engineer-in-charge) under various fixtures complete in all respect. (30.64 (A))

Providing and fixing in position C.P. brass extension piece 25 mm long to 50 mm long approved make (to the approval of Engineer-in-charge) under various fixtures complete in all respect. (30.64 (B))

Providing and fixing in position aluminium khunti with 6 pegs of approved make (to the approval of Engineer-in-charge) fixed into wall with C.P. brass screws and rawl plugs etc. complete in all respect. (30.63 (f))

Providing and fixing in position vitreous chinaware white laboratory sinks of approved make (as required by Engineer-in-charge) consisting of pair of brackets ,c.p. brass waste 40 mm complete in all respect of size 470 mm x 370 mm x 180 mm (30.55 (b)

Providing and fixing in position C.P. brass soap dish of approved make (to the approval of Engineer-in-charge) fixed into wall with C.P. brass screws and rawl plugs etc. complete in all respect. (30.60)

Providing and fixing in position towel ring of approved make (to the approval of Engineer-in-charge) fixed into rawl plugs embedded in wall with brass screws complete in all respect. (30.58(b))

Providing and fixing in position stainless steel sinks of Rectangular sink with deluxe border single bowl overall size 555 mmx 475mm × 200 mm (net size excluding flat edge) of approved make (to the approval of Engineer-in-charge) 1 mm thick, grade 304 18/8 with waste coupling complete in all respect. (30.47(b))

Providing and fixing vitreous chinaware standard white pedestal of approved make (to the approval of Engineer-in-charge) for wash hand basin complete in all respect. (30.43(A))

Providing & Fixing in position best indian make bevelled edge 5mm thick mirror mounted on 4mm thick Cardboard sheet ground fixed in position by means of 4 nos. chromium plated brass screws and washers over rubber washers and rawl plugs embedded in the walls or chromium plated brass clamps with C.P. brass screws (as required by the Engineer-in- Charge) complete including cutting and making good the walls etc. of size 600 mmx450 mm (30.61(a))

scraping white wash and colour wash (8.31(a)

Preparation of plastered or concrete surface for painting (including sand papering the surface) using ready mixed cement based wall putty by applying two or more coats to get required finish (16.65)

Distempering with Acrylic washable oil bound distemper (of approved manufacture) two coats over one priming coat to give an even shade. (16.10)

Finishing walls with exterior decorative cement based paint such as snowcem, robbiacem etc. two coats to give an even shade. (16.13)

Painting two or more coats with synthetic enamel paints in all shades on old wood work or metallic or plastered or concrete surface to give an even shade including rubbing down old paint . (16.18)

Providing and laying 60 mm thick factory made cement concrete interlocking paver block of M-35 grade made by block making machine equipped with steel mould clamped to a strong vibratory table with hydrulic pressure for compacted of concrete as per IRC SP 63-2014 and of approved size and design /shape laid in ordinary grey colour and pattern over and including 40 mm thick compacted bed of coarse sand , filling the joints with fine sand etc all complete as per directions of Engineer in charge.(14.138)

Terracing consisting of tiles 22.86x11.43x3.83 cm laid over 25 mm mud plaster 7.5 cm mud filling on another layer of 25 mm mud plaster including two coats of bitumen laid hot at 1.65 Kg/sqm top of RCC slab including grouting with cement sand mortar 1:4 and top surface to be left clean after wire brushing etc. complete in all respect. (13.13(i)

Providing and installation of 1 KW solar Panels including supply and installation of solar PV mono Perc Modules (330 wp monoperc for 1 KW ) ,solar ongrid inverter with energy export feature , fixing tilt Galvanized iron mounting structure to support 1 KW plant , including balance of system (DCDB junction boxes , earthing kits , AC & DC cables , civil material , contour pipes etc.) including Engineering , procurement and commisioning ( design , supply , installation , testing and commisioning of project ) along with inverter with battery complete in all respect for power backup at flood control room khanouri during flood season . ( as per quotation attached)

Wrought iron and mild steel ladders , framed grills , grating etc. with ends of bars , riveted or welded or forged , framed window guards , barred iron doors , stair case , iron railing including cost of bolts and nuts or screws or welding rod , complete fixed in position . (18.4) ( approx weight 4 kg / rft )

Cutting chase in brick walls in cement or in floor for embedding G.I. or C.I pipes line and making good the same to its original condition size 75 mm x 75mm (30.85(a)) (lumpsum)

CONCEALED IN WALL: Providing & fixing CPVC (Chlorinate Polyvinyl Chloride) pipes as per IS 15778 (ISI marked with the prior approval of Engineer-in-charge) having thermal stability for Hot & Cold Water Supply including all CPVC plain and brass threaded fittings including fixing the pipes with clamps at 1 m spacing including jointing of pipes and fittings with one step CPVC Solvent Cement testing of pipes complete as per direction of Engineer in Charge. CPVC SDR-11 pipe & fittings 25 mm o/d (28.19(c)) (Lump sum)

CONCEALED IN WALL: Providing & fixing CPVC (Chlorinate Polyvinyl Chloride) pipes as per IS 15778 (ISI marked with the prior approval of Engineer-in-charge) having thermal stability for Hot & Cold Water Supply including all CPVC plain and brass threaded fittings including fixing the pipes with clamps at 1 m spacing including jointing of pipes and fittings with one step CPVC Solvent Cement testing of pipes complete as per direction of Engineer in Charge. CPVC SDR-11 pipe & fittings 32 mm o/d (28.19(d)) (Lump sum)

Providing, laying, fixing and jointing of PVC pipes as per IS 4985 (ISI marked with the prior approval of Engineer-in-charge) along the trenches and laying the same in trenches to correct alignment and gradients, cutting, jointing and testing complete as per specifications 110 mm o/d pipe of 6 Kgf/sqcm. (28.13(xv)) (Lump sum)

Providing and fixing iron grated doors, including pintle hinges and arrangements complete in all respect (18.5)

First class burnt brick work laid in cement sand mortar 1:5 in foundation and plinth (11.5)

Damp proof course 4cm thick of cement concrete 1:2:4 with water proofing compound as per manufactures guidelines.(10.27)

Providing and fixing 14 gauge MS sheet garage doors with 40mmx40mmx6mm angle iron frame with diagonal braces 3.15mm gusset plates including locking arrangement with handles etc. complete in respects

Providing and laying Reinforced cement concrete M-20 mechanically batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in superstructure.(10.20)

Cold twisted detormed (Ribbed/ Tor steel) Bars (Fe 500 grade as per IS 1786-2008) , for R.C.C works, where not including in the complete rate of RCC including bending and binding placing in position complete(18.18)

Providing and fixing in position Chinaware Indian Orisa water closet size 580x440 mm of approved make (to the approval of the Engineer-in-charge) consisting of 10 ltr. PVC flushing cistern ISI makred including cost of PVC long bend 32 mm dia complete in all respect and to the entire satisfaction of Engineer-in-charge. (30.2)

Miscellaneous hidden Expenditure like electricity repair,furniture etc.

(B) Estimate for rooms at village Chandu at Jhambowali choe in distt. Sangrur. Preparation of plastered or concrete surface for painting (including sand papering the surface) using ready mixed cement based wall putty by applying two or more coats to get required finish (16.65)

Distempering with Acrylic washable oil bound distemper (of approved manufacture) two coats over one priming coat to give an even shade. (16.10)

Painting two or more coats with synthetic enamel paints in all shades on old wood work or metallic or plastered or concrete surface to give an even shade including rubbing down old paint . (16.18)

Providing and installation of 2 KW solar Panels including supply and installation of solar PV mono Perc Modules (390 wp monoperc for 2 KW ) ,solar ongrid inverter with energy export feature , fixing tilt Galvanized iron mounting structure to support 2 KW plant , including balance of system (DCDB junction boxes , earthing kits , AC & DC cables , civil material , contour pipes etc.) including Engineering , procurement and commisioning ( design , supply , installation , testing and commisioning of project ) along with 2500 VA inverter with 160 AH ( 2 Batteries) complete in all respect for power backup at flood control room khanouri during flood season . ( as per quotation attached)

Miscellaneous items eg. Minor Plumbering , electricity repairs etc.

THE UDHAM NAGAR CO OPERATIVE LABOUR AND CONSTRUCTION SOCIETY LIMITED