PROVN OF CERTAIN NEW SANCTIONED WORKS, ADDN/ALTN TO WASH ROOM, WET CANTEEN AT CQA (A) AND SQAE (A) KHADKI, UNDER GE (CENTRAL) KHADKI.

Amount

Taking down chowkhat or frame n. exc 1.5 Sqm each but with shutter (without taking off shutter from the frame) complete all as specified and as directed.

Taking down chowkhat or frame exc. 1.5 Sqm but n. exc 4 Sqm each but with shutter (without taking off shutter from the frame) complete all as specified and as directed.

Supply and fix Pressed steel frames of size 105x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, tarring back of chowkhats & holdfast etc, complete all as specifed and as directed.

Material and labour for providing cement concrete type C-0 (1:3:6) (using 12.5mm graded aggregate) as in pressed steel door frame (backfil), complete all as specified and as directed.

Material and labour for providing cement concrete type C-1 (1:3:6) (using 20mm graded aggregate) as in hold fast, complete all as specified and as directed.

Supply and fix factory made Solid PVC Door Frame of size 50mm x 47mm single revated made out of extruded 5mm plain colour PVC sheet reinforced with M.S. Square tube etc complete all as specified and as directed.

Supply and fix for Factory Made Solid PVC Moulded Door Shutter with particle board core, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing etc complete all as specified and as directed.

Supply and fix for flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides face is covered with decorative face veneer with lipping/frame to match etc complete all as specified and as directed.

Supply and fix aluminium powder coated window sliding type (3 track) with frame size 100x35x1.2mm thick and shutter frame size 39.40x17.70x1.2mm thick with and including two glass shutter and one mesh shutter including necessary jointing cleats, glazing clips, rubber packing, powder coated aluminium snap beading screws with and including 4mm thick tinted float glass and 0.36mm dia apperture 1.4mm SS wire mesh and fittings etc complete all as specified and as directed.

Supply and fix aluminium louvered ventilators of section size 80mmx20mmx1.50mm including 5mm thick frosted glass fixed in half portion & adjustable type louvers in another half and stainless steel wire mesh fixed type on outside frame etc.complete all as directed.

Supply and fix extruded brass handles, fabricated type polished 150mm long fixing with screws etc complete all as specified and as directed.

Supply and fix brass, sliding door bolt with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed, complete all as specified and as directed.

Supply and fix butt hinges 100mm in size, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 complete all as specified and as directed.

Supply and fix extruded aluminium alloy handles 150mm long in size , fabricated type, anodised complete all as specified and as directed.

Supply and fix Aluminium anodised, barrel tower bolt 200mm long, powder coated of extruded section and fixed complete all as specifed and as directed.

Dismantling floor hearth or wall tilling including cement mortar bedding (but not backing ) and removing the debris outside the defence land complet all as specified and as directed.

Material and labour for Non-skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm over & including 15mm thick screed bed or bedding layer in CM 1:6 for laying floor finishes, set and jointed in neat cement slurry and poited in white or coloured cement to match complete all as specified and as directed.

Material and labour for Glazed coloured ceramic tiles External/Internal in vertical surface 300mm x 450mm x 7mm /300mmx600mmx7mm thick over & including 10mm thick rendering in CM 1:4 set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

Material and labour for Granite 20mm thick work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms, vertical surface of wall also and like in 12mm thick screed bed or bedding layer cement mortar (1:3) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed.

Supply and fix in repairs for Vitreous China table top/Under counter wash basin, white or ivory colour flat back or ovel type, size (620x450x175mm) excluding taps, waste chain and plug and porcelain stopper but including brackets any size, including cutting for and pinning in ends of brackets or erecting stand stand but exclusive of fixing of suppy and waste pipe etc fixed complete all as specified and directed. (SINATRA Cat No. A2020109) (Make : CERA)

Supply and fix in repairs for vitreous china Urinal, half stall type white standard size (excluding flushing cistern flush pipe and waste pipe ) including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement, fixing urinal spreader of PTMT any colour, grating and union for discharge pipe fixed complete all as specifed and as directed.

Supply and fix in repairs for vitreous china white urinal partition of size 310 x 700mm fixed to wall with brass CP screws fixed complete all as specified and as directed.

Supply and fix in repairs for vitreous china wash down water closet pan, pedestal pattern, white, including PVC flush pipe fixed complete including connection to existing cistern including 'P' or 'S' trap complete all as specifed and as directed.

Supply and fix in repairs for Plastic water closet seat white closed pattern with flat bottom and cover and mild steel chromium plated hinging device any type (as per site requirement any type any size), ISI marked fixed complete all as specifed and as directed.

Supply and fix in repairs for PVC valveness, symphonic action type, flushing cistern 10 liters capacity, low level, white with inlet ball valve, float and handle including brackets.

Supply and fix in repairs for PVC waste pipe 32mm dia, complete with 80cm long flexible for WHB/Urinals/Sink fixed complete all as specifed and as directed.

Supply and fix in repair for 15mm bore stop valve, cast copper alloy, screwed down,, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for union and fixed complete all as specifed and as directed.

Supply and fix in repairs for PVC connection 15mm dia and 60 cm long with 2 Nos PTMT nuts, fixed complete all as specifed and as directed.

Supply and fix in repairs 2- Way bib cock, chromium plated with side handle, wall flange and aerator screwed down, screwed for iron pipe or for brass ferrule and fixed 15mm bore complete all as specifed and as directed. (Cat No . F 1099161) (Make : CERA)

Supply and fix in repair Health faucet (ABS body) mild steel chromium plated suitable for 15mm dia pipe with 1.25 mtr long flexible tube and ABS wall hook including making connection and fixed in position complete all as specifed and as directed.

Supply and fix 15mm bore tubes, 'medium grade' galvanised, with all fitting and fixed complete to wall and ceiling or laid in floors including necessary cutting chasing into wall/concelled including taking down old steel tubing etc complete all as specified and as directed.

Supply and fix 20mm bore tubes, 'medium grade' galvanised, with all fitting and fixed complete to wall and ceiling or laid in floors including necessary cutting chasing into wall/concelled including taking down old steel tubing etc complete all as specified and as directed.

Supply and fix in repair grating doom 125mm dia with waste hole of PTMT (min wt 40g) all as specifed and as directed.

Supply and fix in repair for sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long, complete all as specifed and as directed.

Supply and fix in repairs for fancy pillar taps, cast copper alloy with capstan heads, chromium plated, screwed down high pressure , with or without lettered Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipe and fixed for 15mm bore etc complete all as specifed and as directed.

Supply and fix in repairs Wall Mixer telephonic type chromium plated with CP wall flange complete all as specifed and as directed.

Supply and fix in repairs for Tubular towel rail of brass chromium plated, 20mm dia, D type, 60cm long between flanges fixed complete all as specified and as directed.

Supply and fix in repairs 75mm bore PVC (SWR) pipe single socket in any length with rubber ring joints, laid in trenches, wall, floors or laid in sunken floor upto height 10 mtr etc complete all as specifed and as directed.

Supply and fix in repair for 75mm bore PVC bends, branch piece or similar fitting are reqd to make the system functional complete all as specified and as direced.

Supply and fix in repair PVC floor trap/Nahani trap 75mm complete all as specifed and as directed.

Supply and fix Brass chromium plated shower rose 125mm size with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and as directed.

Material and labour for 15mm thick Rendering on brick /concrete or dubbed surface in CM 1:6 on wall finishing even & smooth without using extra cement and similar like at any height including necessary scaffolding , ladder & formwork including taking down cement plaster, raking out joints, hacking for key & scrubbing down with water and removing the debris outside defence land complete all as specified and as directed.

Material and labour for preparation of new plastered wall surface and applying two coat of oil bond distemper emulsion white or tined over one coat of Priming plastered and other surfaces with alkali resistant priming paint, on plastered surfaces, preparatory on wall complete all as specified and directed.

Supply and fix for gypsum reinforced boards 595x595x8 to 10mm thick for ceiling on Hot dipped Galvanised iron imposed grid with 24mm wide T-section exposed flanges which shall be powder coated white. The frame work shall comprise of main runner made from 0.33mm thick GS sheet and of size 24x32x3000mm and spaced at 1200mm centers securely fixed to the structural soffits by approved hangers at 1200mm maximum centers. Hangers of GI wire 4mm dia to be fixed by approved rawl plug, level and justers and screws etc. The last hanger at the end of each main runner shall not be greater than 450mm from adjacent wall. Flush fitting of 1200mm long cross tee (with double stitching) to be interlocked between main runners at 600mm center to form 1200x600mm modules cross tee longer than 600mm to be supported independently. 600x600mm modules to be formed by fitting 600mm long cross Tee centrally between the 1200mm cross tee. Tee, Perimeter wall angle shall be of 0.45mm thick GS sheet of size 19x19mm and 300mm long of white colour all as per manufacture instruction including taking down old/existing ceiling boards of any type (fibre, pulp insulation etc) or insulation boards any thickness incl fillets complete all as specified and as directed.

Demolition of brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars etc, but excluding ashlars facings, dressed stonework and precast concrete articles and removing the debris outside the defence land complete all as specified and as directed.

Material and labour for Brick work with fly ash old size bricks, straight or curved on plan exceeding 6m mean radius, built in cement mortar 1:6 in any position, complete all as specifed and as directed.

Material and labour for 15mm thick Rendering on brick /concrete or dubbed surface in CM 1:6 finishing even & smooth without using extra cement and similar like etc complete all as specifed and as directed.

Supply and fix in repair Rotational moulded polythylene water storage tanks 500 liters capacity (three layered), ISI marked cylindrical vertical with closed top including 3 Nos GI check nuts and tank nipple of 20mm bore for inlet and outlet, 20mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball hoisted and fixed in position all as specifed in SSR Part I complete all as specifed and as directed.

Material and labour for 15mm thick Rendering on brick /concrete or dubbed surface in CM 1:4 finishing even & smooth without using extra cement and similar like etc complete all as specifed and as directed.

Material and labour for preparing new plastered surface of walls and applying two coat of cement base paint at any height including necessary scaffolding ladder etc complete all as specifed and as directed.

Material and labour for Machine cut kota stone slab flooring 20-25mm thick laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing to mirror finish laid over 20mm thick Screed bed or beddidng layer in CM 1:6 for laying floor finishes including dismantling and removing the debris outside the defence land complete all as specified and as directed.

Material and labour for plain cement concrete (1:2:4) type B-0, 50mm thick (using 12.5mm graded stone aggregate) as in sub base complete all as specified and as directed.

Excavating in post holes in soft/loose soil (or similar holes) each n. exc 0.5 Cum getting out returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm watering etc complete all as specified and as directed.

Material and labour for cement concrete (1:2:4) type B-2 (using 40mm graded stone aggregate) as in foundation filling and mass concrete complete all as specified and as directed.

Supply and fix Joist, channel, angle, or tee section, in vertical posts fixed independently, with/without connecting plates & column bracing etc conf to Fe-410W or E-250 quality A etc complete all as specified and as directed.

Supply and fix Rolled sections as in main and cross beams , hip and jack rafters ; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates conf to Fe-410W or E-250 quality A etc complete all as specified and as directed.

Material and labour for preparation of new or previously untreated steel surface of any description over 10cm in width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.

Supply and fix Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as as specified and as directed.

Supply and fix Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall/Ridge fixed with self tapping screws complate all as specifed and as directed.

Surface dressing of soft/loose soil n exc 15 cm deep complete all as specified and as directed.

Removing excavated material/soil n. exc. 50 m and depositing where directed at a level n. exc 1.5 m above the starting point directed complete all as specified and as directed.

Material and labour for hard core of gauge n.exc 63mm, deposited, spread and leveled in layers n.exc 15cm thick, watered and rammed to a true surface of broken stone or boulders complete all as specified and directed

Material and labour for plain cement concrete type D-2 (1:4:8) (using 40mm graded stone aggregate) as in sub base complete all as specifed and as directed.

Providing and laying 60mm thick rubber moulded machine pressed factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc. of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand; including demolition of existing tiles and removal outside the MoD land complete all as specified and as directed.

Material and labour for cement concrete (1:2:4) type B-1 (using 20mm graded stone agg) as in bed block, benching, kerb, mud stop, rounded or chamferred on edges, coping including necessary formwork wherever required complete all as specifed and as directed

Material and labour for point wiring in PVC conduit of suitable size but not less than 20mm including all fittings such as elbow, bends, junction boxes, saddles, etc. on surface with and including ISI marked two runs of PVC insulated unsheathed multistranded copper conductor cable (FRLSH) 1.5 sqmm nominal cross sectional area, 1100 volts grade and including one run of 1.5 sqmm (green colour) ISI marked PVC insulated unsheathed multistranded (FRLSH) copper conductor cable as earth wire to be terminated in and incl PVC rectangular block of suitable size for mounting, switches, sockets, fan regulator etc. with 3 mm thick plastic laminated sheet cover for one light point or one fan point controlled by one switch including making good the disturbed wall and painting the same with matching to existing wall all as specified and directed. For light/fan/exhaust fan point controlled by one switch.

Description all as per Srl item No 66 above but 5 pin switch socket outlet 5 Amps on independent board controlled by one switch.

Description all as per Srl item No 66 above but 5 pin switch socket outlet 5 Amps on same board controlled by one switch.

Description allas per Srl item No 66 above but for for one 6 pin switch socket outlet 15 Amps t on independent board controlled by one switch.

Material and labour for Sub main wiring at any height and surface with and including two single core PVC insulated multi stranded copper conductor cable, conforming to IS, FRLSH type, 4.0 Sqmm, 1100 volts grade, drawn through and including New PVC conduit 20 mm dia including connected accessories and one single core PVC insulated multi stranded unsheathed copper conductor cable, FRLSH type, 4.0 sqmm, 1100 Volts grade,,green in colour as earth contuinity wire complete all as specified and as directed.

Supply, fixing, connecting & testing sheet metal enclosures, double door, for SPN DBs suitable for single pole and neutral, 8 way, 240 volts IP 43 protection, with steel door having copper bus bars suitable for 200 Amps rating per phase and separate neutral, door earthing including taking down old DBs and making good the surface complete all as specified and as directed.

Supplying & fixing MCB 6 to 32 Amps, single pole and neutral, "C" curve 10 kA breaking capacity with integrated label holder, sliding bottom clamp, color coded On/Off indication on dolly complete all as specified and directed.

Supplying & fixing MCB 6 to 32 Amps, single pole, 10 kA breaking capacity with integrated label holder, sliding bottom clamp, color coded On/Off indication on dolly, complete all as specified and directed.

Supply & fix exhaust fan 240mm crisp air 150mm sweep complete including connecting up to ceiling rose with twin core twisted flexible copper conductor cable with suitable size & all accessories for fixing on steel trusses / false / normal ceiling all as specified & directed.

Supply & fix 1 x 20 watt mirror light 2 feet PC housing PC Diffuser weatherproof LED batten luminaire with 120 lm/W efficacy equipped with 4 KV in built surge protection IP65 protection rating durable instrial lighting solution luminaire with integrated LED channel complete all as specified and as directed.

Supply & fixing, LED tube light fitting suitable for and including 1x18 W 4 feet long tube with polycarbonate diffuser complete including connecting up to ceiling rose with twin core twisted flexible copper conductor cable with suitable size & all accessories for fixing on steel trusses / false / normal ceiling complete all as specified and as directed.

Supply and fixing in replacement Stepped type electronic fan regulator flush type suitable for ceiling fans, prewired 230 volts AC 50Hz supply 100Watt complete all as specified & directed.

Supply and fix LED security Light fitting of 90 watt with LED driver complete with bracket made of 25/32 mm GI Pipe Light grade, clamps, nut, bolt and washers complete all as specified and as directed.

Material and labour PVC Insulated flat servies cable 2 core 4 sq mm including 4 mm suspention wire complete all as specified and as directed.

Supply and fix switch piano flush type single pole, one way 5 Amp complete all as specified and as directed.

Supplying & fixing ceiling rose PVC/polycarbonate, isolated body, three terminals, complete all as specified & directed .

Supply and fixing ceiling fans complete with blades, down rods, ectronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) all as specified and directed.

SAMBHAJI D JARANDE (BID ID -3377365)

S.R.M.K Enterprises (BID ID -3368996)