PROVN OF 05 NOS TOILET BLOCKS CONTAINING 08 WCS EACH AT VARIOUS LOCATIONS UNDER AGE B/R-I OF GE GOLCONDA

Amount

Surface excavation n.exc 30cm deep and averaging 15cm deep and getting out in hard/dense soil compete all as specified and directed.

Excavation in trenches n.exc 1.5 m wide and n.exc 1.5 m in depth for foundation etc or for shafts wells, cesspits, manholes, pier holes etc n.exc 10 Sqm on plan and n.exc 1.5 m in depth and getting out in hard/dense soil compete all as specified and directed.

Excavation in trenches n.exc 1.50m wide and n. exc 1.50m in depth and getting out in hard rock by means of mechanical plant or by chisel cutting compete all as specified and directed.

Excavation over areas n. exc. 1.5m deep and getting out in hard / dense soil complete all as specified and directed.

Returnng, filling in including spreading, levelling, watering and well ramming in layers not exc 25cm compete all as specified and directed.

Labour only for Spreading, Levelling and well ramming including watering as required the soil obtauned from excavation, in layers n.exc 25 cm thick compete all as specified and directed.

Removing excavated material to a distance n exc 50m and depositing where directed at a level n exc 1.5m above the starting point compete all as specified and directed.

M&L for PCC type D2 1:4:8 (using 40mm graded stone Aggr) in foundations, filling and mass concrete compete all as specified and directed.

M&L PCC 1:2:4, type B1 (using 20 mm graded stone aggregated) as in benching of manholes and coping including necessary form work complete all as specified and directed.

M&L for RCC 1:2:4 type B1 using 20mm graded stone aggregate as in Pre-cast cover slabs for mahnoles incl necessary from work, set in CM 1:4 complete all as specified and directed (Reincorcement will be measured & paid separately).

M&L for salt glazed stoneware drain pipes 150mm dia bore (Grade 'A' pipe) laid in trenches and jointed as specified incl demolition and breaking of same bore drain pipe complete all as specified and directed

M&L for concrete bed to drain pipes 150mm dia using cement concrete 1:3:6 type C2 including packing under and haunching against the sides of pipes after they are laid and tested in complete all as specified and directed

Use & waste of form work to sides of concrete foundations rafts, footing, base of columns, raft and raft beams, sides & soffits of foundation (if any) and plinth beams and similar work for rough finished surfaces compete all as specified and directed.

M & L for reinforced Cement Concrete (Nominal mix) type B1 1:2:4 (using 20 mm graded granite stone aggregate) in foundations including rafts, footings and mass concrete, foundation beams, plinth beams, bases for columns, basement slabs etc.

Use and waste of form work to sides and soffits of floor or roof beams, lintles, cantlevers, shelves incl supports etc for rough finished surface of concrete compete all as specified and directed.

M&L for reinforced cement concrete (Nominal mix) type B1 (1:2:4) (20 mm graded aggregate) in lintel bands, roof beams and cantilevers etc. compete all as specified and directed.

Use & waste of rough finished Square, rectangular or polygonal Form work to sides of pillars, posts, struts, columns and stanchions compete all as specified and directed.

M & L for reinforced Cement Concrete (Nominal mix) type B1 (1:2:4) (using 20 mm graded granite stone aggregate) in Columns, piers, posts and struts compete all as specified and directed.

Use & waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) for rough finished surface compete all as specified and directed.

Use & waste of formwork to edges of concrete flats, treads, breaks in floors,window cills, concrete railings,openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide for rough finished surfaces compete all as specified and directed.

M&L for reinforced Cement Concrete type (Nominal mix) type B1 (1:2:4) (Using 20 mm graded aggregate) for slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, desk slabs and in shelves and the like compete all as specified and directed.

M&L MS TMT bars 10mm dia and over, cut to length bent to shape required including cranking, bending spirally for hooping for columns hooking ends and binding with and including mild steel wire (annealed not less than 0.9 mm dia) or securing with clips compete all as specified and directed.

M&L MS TMT bars 6 to 8 mm dia and over, cut to length bent to shape required including cranking, bending spirally for hooping for columns hooking ends and binding with and including mild steel wire (annealed not less than 0.9 mm dia) or securing with clips compete all as specified and directed.

M&L MS TMT bars 5mm dia and over upto and incl 10 mm dia, cut to length bent to shape required including cranking, bending spirally for hooping for columns hooking ends and binding with and including mild steel wire (annealed not less than 0.9 mm dia) or securing with clips as in spacers, stirrups and binders compete all as specified and directed.

M&L for Cutting into existing manholes for connecting new drains. Making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B1 smooth finished, and reforming benching as required for 150 mm dia compete all as specified and directed.

M & L Pre-cast cement concrete solid block masonry, 1:2:4 Type B1 ( 20mm graded stone aggrigate) exc. 10 cm in width and setting in cement mortar 1:6 complete all as specified and directed.

M&L precast cement concrete solid blocks masonry 1:2:4 Type B1 (20mm graded stone aggrigate) 10cm thick (with plain or interlocking joints as directed) setting in mortar 1:4, complete as in walls complete all as specified and directed.

M&L brick work with fly ash bricks built in CM 1:4 with sub class 'B' bricks straight or curved on plan exc 6 mtr mean radius complete all as specified and directed

M&L for providing, cement concrete 1:2:4 Type B1 using 20 mm graded stone aggregate in coping/benching/surface channel etc including necessary formwork complete all as specified and directed.

M&L for rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 finished smooth and even without using extra cement complete all as specified and directed.

M&L for rendering 5 mm thick on fair faces of concrete surfaces of ceilings in cement mortar 1:3 and finished even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 15mm thick in CM 1:4 mixe with WPC on fair faces of brick work or on concrete surfaces finished even and smooth (without using extra cement) (IWPC measured and paid separately) complete all as specified and directed.

M&L for rendering 15mm thick in CM 1:4 on fair faces of brick work or on concrete surfaces finished even and smooth (without using extra cement) complete all as specified and directed.

Supply only integral water proofing compound

M & L three coats of white wash on newly plastered surfaces of wall including preparation of surfaces complete all as specified and directed.

M & L three coats of white wash on newly plastered surfaces of ceilling including preparation of surface complete all as specified and directed.

M&L for preparation of new plastered surfaces and applying two coats of cement based paint complete all as specified and directed.

M&L hardcore of gauge n.exc 63mm of broken stone or boulders, deposited, spread and levelled in layers n.exc 15cm thick, watered and rammed to a true surface complete all as specified and directed.

M & L for 75mm thick PCC type D-2, 1:4:8 (using 40mm graded stone aggregate) as in sub base of floor complete all as specified and directed.

M&L for 25mm thick cement concrete type B-1,1:2:4 (20mm graded aggregate) as levelling course of flooring complete all as specified and directed.

S&F for non skid coloured ceramic tiles 7 to 8mm thick (square or rectangular) area of each tile exceeding 0.06sqm but not exceeding 0.11 sqm, in floors etc, laid over and including cement screed in CM 1:6, 15mm thick, jointed and pointed in neat cement slurry complete all as specified and directed.

S&F for glazed ceramic coloured tiles of size 300x450x7mm thick as in vertical surfaces in dado/skirtings set and jointed in neat cement slurry and pointed in white or coloured cement to match, fixed over and including10mm thick back coat in CM 1:4 complete all as specified and directed.

M & L for 75 mm thick Cement concrete 1:3:6 type C-2 (using 40 mm graded crushed stone aggregate ) as in plinth protection finished even aned smooth without usisng extra cement complete all as specified and directed.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube complete all as specified and directed.

S & F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.

S&F 100 mm long extruded Aluminium alloy butt hinges fixed to PVC door shutter complete all as specified and directed.

S&F 150mm long aluminium anodized barrel tower bolts of extruded section complete all as specified and directed.

S&F 150 mm long alluminium alloy anodized handles fabricated type complete all as specified and directed.

S&F Vitreous China squatting pan, "Orissa" pattern size 580 X 440 mm white, with intgrel footrest (excluding flushing cistern & flush pipe) including 110mm dia PVC SWR 'P' or 'S' trap including provision of cement concrete complete all as specified and directed.

S&F PVC valveless syphonic action type flushing cistern 10 lit capacity low level, white with inlet, ball valve, float and handle including brackets and 32mm PVC flush pipe complete all as specified and directed.

S & F PVC connections 15 mm size with PTMT nuts, length 450 mm complete all as specified and directed.

S&F stop valve/angle cock 15mm bore cast copper alloy chromium plated and cup screwed down high pressure screwed both end for iron pipes or for unions complete all as specified and directed.

S&F fancy type bib tap 15 mm bore chromium plated, cast copper alloy, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S&F GI pipes medium grade 15 mm dia with all fittings, fixed to walls/ ceilings or laid in floors complete all as specified and directed.

S&F GI pipes medium grade 20 mm dia with all fittings, fixed to walls/ ceilings or laid in floors complete all as specified and directed.

Supply & fixing galvanized steel water tubing medium grade with all fittings such as bends elbows, tees, short pieces, connectors, back nuts, diminishing pieces, caps and pigs, unions etc of size 25mm dia complete all as specified and directed.

S&F GI pipes medium grade 50 mm dia with all fittings, fixed to walls/ ceilings or laid in floors complete all as specified and directed.

Supply & fixing gun metal globe or gate valve with iron wheel head screwed both ends for iron pipe pipe of size 20 mm complete all as specified and directed.

Supply & fixing gun metal globe or gate valve with iron wheel head screwed both ends for iron pipe pipe of size 25 mm complete all as specified and directed.

S & F 110 MM PVC (SWR) pipe single socketed in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed.

S & F 110 mm PVC (SWR) junction single (Single T) equal or unequal with access Door complete all as specified and directed.

S & F 110 mm PVC (SWR) bends complete all as specified and directed.

S & F 110mm PVC (SWR) vent cowl complete all as specified and directed.

Cutting existing steel tubing of size 50mm/40mm dia for alterations or additions (Each cut measured)

Screwing existing steel tubing of size 40mm/50mm dia for alterations or additions (or lengthening screw on pipe to form connector)

M&L for two coats of synthetic enamel painting to new steel surfaces over a coat of red oxide zinc chrome including preparation of surfaces area exc 10cm width & girth complete all as specified and directed.

S&F steel ventilator with top hung shutter including hinges, steel peg stay complete all as specified and directed.

S & F figured glass pin headed quality in squre n.exc. 0.5 Sqm in each pane of 3.00mm thick complete all as specified and directed.

M & L rendering 10mm thick on concrete surfaces in CM 1:4 mixed with water proofing compound and finished even and smooth without using extra cement including laying APP based polymeric membrane minimum weight 3Kg/Sqm and minimum 3mm thick reinforced with polyster non wove fabric (weight not less than 150 gms/Sqm) over primed surface with bituminous primer conforming to IS-3384 applied @ 0.3 Ltrs/Sqm by forced application and applying one coat bitumen grade 85/25 @ 1.2 Kg/Sqm finised with one coat of aluminium paint @ 100ml/Sqm, 10cm overlap fused uniformly by LPG torched flame complete all as specified and directed. Note: Water proofing compound shall be measured and paid separately.

M&L Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering

M&L Point wiring for one light point/fan point/bell point controlled by one switch with 1.5 sqmm multistrand copper conductor cable PVC (FRLS) insulated sheathed single core multi stand flexible cable and 1.50 sqmm PVC (FRLS) insulated unsheathed copper conductor single core cable ( green colour) as earth lead in and including PVC rigid conduit with all fittings for Concealed type on stone / brick, masonary walls, roof etc including new CI/MS sunken box of required size & 3 mm thick plastic laminated sheet for housing switches sockets, regulators etc. including cutting/running chases, pinning in and making good the disturbed surfaces to match with the existing specification, complete all as specified and directed.

M&L switch piano flush type single pole one way 5 Amps complete all as specified and directed.

S & F LED light fittings, 1x10 watts bulk head luminaires etc complete with all accessories and including connecting up with twin core twisted flexible PVC copper conduct cabe of 23/0.0076 from ceiling rose all as specified

S&F Ceiling rose surface bakelite 65 x 50 mm 2/3 terminals complete all as specified and directed.

M&L lamp holder insulated body with back plate suitable for battern fittings complete all as specified and directed.

S&F 9/10 W LED bulb of base B22d with color temp 6500K all as specified and directed.

Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed.

S&F Sheet metal enclosure MCB DB including 200 Amps bus-bar single pole and neutral 240V, 4 Ways, double door complete all as specified and directed.

Supply and fixing 240V, 10 KA 'C' curve miniature circuit breaker (MCB) of SPN and current carrying capacity 6 to 32 AMP with connection testing and commissioning complete all as specified and directed.

Supply and fixing 240V, 10 KA 'C' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 6 to 32 AMP with connection testing and commissioning complete all as specified and directed.

Earthing complete with galvanized steel earth plate electrode 60cmx60cmx6mm thick buried directly in ground (earth pit not less than 2.25 mtr below ground level) with top edge o the plate not less1.5 mtrs below normal ground level connected to galvanised earth lead wire 4 mm dia by means of bolts nuts, check nuts and washers of galvanized iron of steel all as shown in electrical plate No.3 connected to earthing test point incl necessary earth work, excavation PCC 1:3:6 type CI using 20mm graded stone aggregate for earth chamber provn of PCC cover 40 mm thick 1:2:4 mm type B1 funnel with water Pipe, GI pipe, 15mm dia medium grade protection pipe, GI earth lead complete all as specified and directed.

Supply, laying and testing XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 10 sqmm, 2 Core complete all as specified and directed.

Supply and spread approved dry river sand for cable cushioning laid in trenches including watering and consolidation complete all as all as specified and directed. Note:- Punned thickness shall be measured and paid.

M&L brick protection with common burnt bricks sub class ‘B’ of size 230 x 115 x 75mm for cable protection complete all as specified and directed.

M & L for cutting of Road/hard standing made of concrete ,soiling and morrum filling including excavation for laying of cable/pipe all as directed and making good the road/hard standing by using all old/new materials and with PCC (1:2:4) etc, required to match with the existing surface complete all as specified and directed.

Amutha Constructions

STANDARD AGENCIES

Sri Lakshmi Enterprises

Sri Associates

M/S SAI MURALI ENTERPRISES

RAFEEQ AND CO

M/S Veerabhadra Constructions

m/s s indra reddy constructions

M/s Amit Associates