Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Finance 145 1 0 NEAR OLD LIC SHIV NAGAR VILLAGE TOWN MODIPURAM CITY MEERUT MEERUT UTTAR PRADESH 250110 INDIA | MEERUT | UTTAR PRADESH | 250110 | Admitted-Finance |
| 2 | Admitted-Finance | Admitted-Finance |
| 3 | Admitted-Finance 2ND FLOOR SHOP NO 303 MARUTI PLAZA RONCHI BANGAR TOWNSHIP MATHURA | MATHURA | UTTAR PRADESH | 281001 | Admitted-Finance |
Tender Value
₹14.3 L
EMD Value
₹14,000
Closing Date
8 Jun 2023, 1:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
SE ETC Mathura
132 KV S/S Aurangabad Mathura
Works for Increasing Capacity from 2X40 MVA to 3X40 MVA with construction of transformer bay and other associated works at 132 KV Sub-Station Sasni Under ETD Hathras
2023_UPTCL_806690_1
ET-07/ETC(M)/23-24
Open Tender
Electrical Works
Lump-sum
180 days
Under ETC Mathura
Please refer Tender documents.
2 documents required · 2 mandatory
₹590
EE ATT ETC Mathura
₹14,000
15 Jun 2023
27 May 2023
9 Jun 2023
27 May 2023
8 Jun 2023
27 May 2023
Amount
Supply for 132 KV Bay
Supply of Bolted type busbar tension fitting suitable for single Moose conductor made of LM-6 alloy Complete with ball eye socket and ‘D’ shackle single phase type turn buckle in all respect.
Supply of Bolted type busbar tension fitting suitable for single ACSR Panther conductor made of LM-6 alloy Complete with ball eye socket and ‘D’ shackle single phase type turn buckle in all respect.
Supply of 132 KV line tension fitting suitable for panther conductor
Supply of four bolted type P.G. clamp made of LM-6 alloy along with Galv. Nut, bolt & washer suitable for Moose to Moose Conductor.
Supply of P.G. clamp made of LM-6 alloy along with Galv. nut, bolt & washer suitable for Panther to Panther conductor.
Supply of P.G. clamp made of LM-6 alloy along with Galv. nut, bolt & washer suitable for Moose to Panther conductor.
Supply of 33 KV Isolator clamp made of LM-6 alloy with Galv. Nut bolt & washer suitable for Twin Moose conductor.
Supply of 33 kv VCB clamp made of LM-6 alloy with Galv. Nut 'bolt & washer suitable for Twin Moose conductor.
Supply of line suspension fitting suitable for Panther Conductor.
Supply of tinned copper bond of size 15x550mm made of stranded copper rope with well compressed copper lugs (16 mm hole) at both ends.
Supply of 150 mm spacer for Twin Moose conductor made of LM-6 aluminum alloy with 12mm dia HDG nut, bolt & washer as per technical specification.
Supply of Post insulator clamp for Moose conductor
Supply of Post insulator clamp for Panther conductor
Erection & Commissioning Work for Bay
Erection of main and auxiliary structure consisting of columns, beams, peaks, masts etc. and auxiliary structure required for installation of Jack busbar isolators, P.I., CVTs., L.As. and all other equipments. The job consists of shifting of all material i.e. conductor, equipments, fittings, structure parts, nuts, bolts, washer etc. from store to site of erection, erection of structure as per relevant drawing and practices using flat and spring washer with each bolt. Matching of holes, cutting, matching of members if required shall also be done by the contractor without any extra cost to complete the work satisfactorily. All material to be erected shall be supplied by UPPTCL free of cost but all labour and T&P required for satisfactorily completion of work shall be arranged by the contractor at his own cost.
Dismatlling of following equipments and structure after opening all jumpers, earthing and cable connection with the help of skilled labour and required T&P. Work also include stacking of material at the place decided by the supervising engineer.
250 KVA 33/0.415 KV Substation Transformer
Erection of following equipments and earthing as per instruction manual of various equipments and technical specifications including shifting of material/equipments from store to erection site, cable laying for S/S T/F and all other associated work to complete the job satisfactorily.
250 KVA 33/0.415 KV Substation Transformer
132KV CT Junction Box
133 KV PT Junction Box
132 KV BI/LI/TI
ABT Meter cubicle
33 KV VCB
33KV CT Junction Box
Stringing of various main & jack busbar of 132 KV with diffrent type conductor and different length of span mentioned below including fitting of tension clamp, hoisting of insulators, cutting of conductor and also shifting of all materials form store to work site and all other associated works required for completion of job satisfactorily as per technical specification.
132 KV Main bus 3x Single Moose
132 KV Transfer bus 3x single Panther
132 KV Jack bus 3x single Panther (for T/F)
Making new jumpers of 132KV & 33KV CB, CT, Isolator and LA by Moose/Zebra/Panther conductor by cutting, bending and shaping of conductor along with shifting of material from site store to work place.
Providing inter connection diagram and cable schedule as per drawing to complete connection of C.B., C.T., Isolator, Panel and Transformer etc.
Shifting of PVC control cable of 132 KV Sasni-Aligarh-III line control & Relay panel to 132 KV Odpura-Sasni line control & Relay panel in control room. Work includes making holes in cable plate, termination of cable with gland and ferrul and complete connection for satisfactory operation.
Laying of following sizes of control cable in the cable trench from control relay panel to various equipments/junction box etc. in switchyard as per cable schedule, their saddling at every 750mm distance with M.S. saddles of size 25x3mm, including carriage of cable drums from store to laying site and shifting back the removed material to store and all other associated work to complete the job satisfactorily as per technical specification.
6x2.5 Sq. mm.
4x2.5 Sq. mm.
2x2.5 Sq. mm.
Termination of following sizes of cable as laid above with proper cable gland, cable tag, ferrules by making necessary holes in gland plate or box wherever required. Supply of cable glands, ferrules and tags shall be done by contractor at his own cost. (Termination of control cable include all cores of one cable at one end)
6x2.5 Sq. mm.
4x2.5 Sq. mm.
2x2.5 Sq. mm.
Laying of 40 mm dia MS Round bar for earthmat of extended switchyard, 900 mm below ground level in X-Y direction including cutting , straightening, welding ,excavation of trench, connecting with old earthmat, soil back filling and other associated work to complete the job satisfactorily as per drawing and technical specification excluding the cost of MS round ( row to row distance 6 mtr)
Fabrication of 3 M long electrode from 40mm MS Round bar having 150 mm long conical shape and then its pierecing vertically inside the ground with top 800 mm below ground level and its welding with earthmat, excluding the cost of MS round.
Fabrication of 20 cm cleat with 50x6 MS angel including cutting and welding.MS angle and other material shall be provided by the contractor at his own cost.
Cutting, straightening, bending & laying 900mm below in ground and above ground of following size of M.S. flat for earthing of main and auxiliary structure, equipment structure etc. including welding with main earthmat and with object to be earthed, excavation of trenches, its back filling, painting with one coat of primer and two coats of bush green synthetic enamel paint from Aisan/Berger/Nerolac and all other associated work as required to complete the work satisfactorily excluding the cost of M.S. flat.
Providing and fixing new generation energy saving and enviournemnt friendly long life versatile pressure die cast aluminium out door high beam flood light with high power 120W LEDs as light source and exclusively design poly carbonate cover satisfying IP65 standard alongwith electronic driver and complete fitting including GI pipe, suitrable for 220 V AC supply from CGL/Havells/Philips. Guarantee period provided by OEM should be atleast one year and service within guarantee period shall be endured by contractor.
Providing and fixing of junction box of 16 SWG MS sheet duly painted having size 150x150x200mm for above light on bottom of main structure and pole with the help of clamps jumction box contain 01 No., 6Amp single pole MCB (L&T/Havells/Schneider make), 01 No. link and cable gland etc. as per specification.
Laying, dressing and termination of contorl cable for the light with the help of clamps vertically on the gentry and all other associated work to complete the job. Cable shall be provided by the department free of cost and all other materials shall be provided by the contractor at his cost.
Shifting of 20 mtr. highmast ligh after dismantling 400 W flood light with accessories, structure with motor, sling, control cubicle etc. and re-installation of highmast light at designated place by casting new RCC foundation in 1:2:4 ratio as per drawing, erection of complete structure with light, motor, sling and control cubical with all cabling work required.
Safe shifting of old and new material from old open store/yard to new open store with the help of hydra.
Demolition of RCC foundation of old high mast and shifting waste from site to dumping place.
Following works are required for shifting of 132 KV Sasni -Aligarh-III line bay and Odpura-Sasni line bay from existing bays to other bays as to spare 132 KV Odpura-Sasni line bay for 40 MVA T/F-lll.
Dismentalling of R, Y and B phases conductor from gantry to dead end tower and dead end tower to adgecent tower of 132 KV Odpura-Sasni line and Sasni-Aligarh-III line.
Dismentalling of existing 03 nos. cross arm of dead end tower of each i.e.132 KV Odpura-Sasni line and Sasni-Aligarh-III line.
Fabrication of box type cross arm at dead end tower for 132 KV Odpura-Sasni line and Sasni-Aligarh-III line from old cross arm angle and GI angle of old tower. Old tower parts and nut & bolts shall be provided by the department free of cost.
Erection of box type cross arm at dead end tower for 132 KV Odpura-Sasni line and Sasni-Aligarh-III line.
Stringing of R, Y and B phases conductor from gantry to dead end tower and dead end tower to adgecent tower of 132 KV Odpura-Sasni line and Sasni-Aligarh-III line. Work also includes making joint with the help of Mid span compression joint if required. Compression joint shall be provided by the department free of cost.
Sorting and counting of G.I. structure (app. 23.5 MT) as per drawing and BOM at EFU Naini (Prayagraj) with the help of skilled labour and T&P, shifting the structure from store to loading site, proper stacking as per direction of concerned engineer. Work also include loading of alloted approximate 23.5 MT G.I. structure in private vehicale at EFU Naini (Prayagrag) with the help of skilled labour and T&P or crane.
Carriage of approximate 23.5 MT G.I. Structure in private vehicale of suitable capacity from EFU Naini ( Prayagraj) to 132 KV Substation SASNI under ETD Hathras ( distance app. 650 km)
Safe unloading of approximate 23.5 MT G.I. Structure from private vehical at 132 KV Sasni with the help of skilled labour. Work also includes stacking of structure from unloding place to store or designated place as per direction by concerned engineer.
Carriage of approximate 09 MT, 40 mm MS round in private vehicale of suitable capacity from Rashtriya Ispat Depot (Ghaziyabad) or other depot within 150 Km. to 132 KV Substation Sasni under ETD Hathras, Work also includes loading, unloding and stacking of material at depot and Sasni site.
Erection & Commissioning Work for Transformer
Shifting of 20 KL oil tank from any substation within 100 Km to 132 KV S/S Sasni including loading & unloading.
Shifting of 20 KL oil tank from 132 KV S/S Sasni (After completion of work) to the substation as directed by Engineer incharge, within 100 Km including loading & unloading.
Shifting of main tank of 40 MVA,132/33 KV transformer from unloading place to the plinth distance about 20 meter including turning of tank, if required , including all T&P and all other works required to complete the job satisfactorily.
Additional shifting of approx. 5 Mtrs or part thereof, if any.
Draining out fresh transformer Oil from 209 Ltr. drums to 20 KL tank. (App. 29 Drums)
Centrifuging of transformer oil in 20 KL storage tank for atleast 72 hours by 10 KL/Hour capacity centrifuging machine until required standard of oil parameters achieved. Centrifuging machine with fresh oil filters shall be arranged by the contractor alongwith operator and taking the B.D.V values of the oil periodically till the required value is achieved as per direction of supervising engineer. Calibrated BDV machine shall be provided by the contractor at his own cost.
Complete erection of 40 MVA capacity transformer by erection of radiators conservator tanks, all bushing, turrets, connecting oil pipe lines, cooling fans, motor drive mechanism of tap changer, C&R panel, RTCC panel alongwith their earthing and shifting form store to control room etc to complete the job satisfactory. Work also include replacement of factory fitted gaskets, 'O' rings as per requirement of site Engineer with brand new gasket, 'O' rings as per standard of OEM.
Filling of approximate 06 KL fresh centrifuged transformer oil in 40 MVA T/F after complete erection of transformer as per direction of supervising engineer.
Centrifuging of transformer oil in transformer main tank for atleast 72 hours by 10 KL/Hour capacity centrifuging machine until required standard of oil parameters achieved. Centrifuging machine with fresh oil filters shall be arranged by the contractor alongwith operator and taking the B.D.V values of the oil periodically till the required value is achieved as per direction of supervising engineer. Calibrated BDV machine shall be provided by the contractor at his own cost.
Earthing of 40 MVA T/F HV and LV Neutrals, Body, Marshaling box, Drive mechanism etc. with 75X10/50X6 MS flat (To be provided by department) including, bending, cutting & welding etc. Work also include painting of MS flat by applying one coat of red oxide and two coats of bush green synthetic enamel paint from Nerolac/Asian Paints/Berger.
Jumpering of 40 MVA transformer on HV side with single panther conductor and LV side with twin/single Moose conductor.
Laying of following sizes of control cable in the cable trench from control Relay panel to various equipments/junction box etc. in switchyard as per cable schedule, their saddling at every 750mm distance with M.S. saddles of size 25x3mm including carriage of cable drums from store to laying site and shifting back to store. Work also include shifting of control cable from CP and DPP of 132 KV Odpura-Sasni line to new T/F C&R panel.
10x2.5 Sq. mm
6x2.5 Sq. mm.
4x2.5 Sq. mm.
2x2.5 Sq. mm.
Termination of following sizes of cable as laid above with proper cable gland, cable tag, ferrules by making necessary holes in gland plate or box wherever required. Supply of cable glands, ferrules and tags shall be done by contractor at his own cost. (Termination of control cable include all cores of one cable at one end)
10x2.5 Sq. mm
6x2.5 Sq. mm.
4x2.5 Sq. mm.
2x2.5 Sq. mm.
Construction of delta grounding system for 40 MVA T/F HV and LV neutral separatly with the help of 40 mm dia, 3 meter long MS round; 75x10 mm MS flat. Work include excavation of 3 nos 4 meter depth, 200 mm wide borehole in ground, placing 3 meter long pointed 40 mm round in middle of bore and filling the surrounding cavity with raw salt and wood charcoal mixture in 50:50 ratio. Connecting 3 nos 40 mm electrodes with the help of 75x10 mm flat then grounding of neutral point with 75x10 mm double MS flat separately and connecting the delta with switchyrard earthmat at 'X' and 'Y' axis earthing MS round.
Construction of separate grounding system for 120 KV and 33 KV LA with the help of 40 mm dia, 3 meter long MS round, 75x10 mm flat. Work include excavation of 6 nos 4 meter depth, 200 mm wide borehole in ground, placing 3 meter long pointed 40 mm dia rod in middle of bore and filling the surrounding cavity with raw salt and wood charcoal mixture in 50:50 ratio. Connecting 6 nos 40 mm dia electrodes with the help of 75x10 mm flat then grounding of structure with yard eathmat and LA grounding point with 75x10 mm MS flat separately.
Erection of 03 Nos. 120 KV LA and 03 Nos. 33 KV LA along with structure. Work Include shifting of structures and LAs from store to site, jumpering etc.
Providing and fixing new generation energy saving and enviournemnt friendly long life versatile pressure die cast aluminium out door high beam flood light with high power 120W LEDs as light source and exclusively design poly carbonate cover satisfying IP65 standard alongwith electronic driver and complete fitting including GI pipe, suitrable for 220 V AC supply from CGL/Havells/Philips. Guarantee period provided by OEM should be atleast one year and service within guarantee period shall be endured by contractor.
Providing and fixing of junction box of 16 SWG MS sheet duly painted having size 150x150x200mm for above light on bottom of main structure and pole with the help of clamps jumction box contain 01 No., 6Amp single pole MCB (L&T/Havells/Schneider make), 01 No. link and cable gland etc. as per specification.
Laying, dressing and termination of contorl cable for the light with the help of clamps vertically on the gentry and all other associated work to complete the job. Cable shall be provided by the department free of cost.
Providing & fixing of glow shine board for control room building of size 8ftx5ft made of milky acrylic board and frame of 28 SWG G.I. Sheet having depth 150mm with 05 Nos. 20W, 230V betton LED tube light fitted inside for glowing the board. Board is to be supplied alongwith the back support frame and four leg for grouting including framing around the board wire mesh. All materials, labour and T&P shall be Provided by the contractor at his own cost. Material to be printed shall be given by supervising engineer.
Providing, fixing and grouting of retro reflective sign board for 132 KV S/S Sasni at main gate and main road of size 6ftx4ft made of 2mm thick aluminum sheet, face to fully covered with 3M DG cube retro reflective sheet of yellow colour. The letters and symbols shall be computer cut and in blue colour. Board is to be supplied along with the back support anlge with two legs for grouting. Material to be printed shall be given by supervising engineer.
Providing, fixing and grouting of retro reflective sign board for new T/F of size 3ftx2ft made of 2mm thick aluminum sheet, face fully covered with 3M DG cube retro reflective sheet of yellow colour. The letters and symbols shall be computer cut and in blue colour. Board is to be supplied along with the back support with two legs for grouting. Backside of aluminum sheet shall be painted with stove enamel paint. Material to be printed shall be given by supervising engineer.
Providing and fixing of digitally printed glow shine board of Single Line Diagram of 132 KV S/S Sasni of size 6ftx4ft made of acrylic sheet having thickness 2 mm minimum. Single line diagram shall be provided by the supervising engineer.
Fabrication of hut shaped fire bucket stand made of MS angle of size 40x40x6 mm and ISI mark asbestos roofing sheet, having arrangment for hanging 06 buckets. All the metal surfaces should be painted with one coat of red oxide and two coats of first quality post office red synthetic enamel paint from Asian Paints/Nerolac/Berger. " FIRE" in 25 cm should be written in white color on the top of the both side of roof after painting in red colour. All the material except MS angle shall be provided by the contractor at his own cost.
Providing and painting fire buckets of 9 ltr capacity as per IS 2546, buckets should be painted inside by white, outside by fire red; ear, handle and letters by black color with two coats of first quality synthetic enamel red paint after one coat of red oxide, from Asian Paints/Nerolac/Berger. "FIRE" and "avkx" in 10 cm font in black color should be written on opposite sides of buckets. All the material shall be provided by the contractor at his own cost.
P&H Engineering
M/s S.S. Refregeration
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .