8230 REPAIRS TO WOODEN JOINERY, ALUMINIUM JOINERY, FLOOR / DADO, SANITARY, PLUMBING AND CERTAIN MISC WORKS IN MD ACCN OF A AND B WING OF DAD COMPLEX LULLANAGAR AREA UNDER AGE BR I SOUTH PUNE

Amount

Taking down / cutting steel window shutters by means of gas cutter without disturbing of soffit / jambs / cills etc. of any description not exc. 1.5 sqm (without taking off guard bars) complete all as specified and as directed.

S&F in repair three track sliding window with two or more shutter witth 4 mm thick tinted glass , one shutter of stainless steel wire cloth 0.36 mm nominal dia & 1.18 mm width aperture for mosquito proofing with good quality bearing, handle lock, rubber beading and glazing clips etc using following aluminium powder coated sections conforming to catalogue of 'JINDAL' or of equivalent make complete all as specified directed by Engr-in-Charge. (a) Bottom frame 20620 (b) Top frame & Verrtical 20621 (c) Handle (side) 20606 (d) Shutter inter lock 20724 (e) Shutter top & Bottom 20844 (f) Glazing Clip 19352

S&F ventiltors/ louvers with partially guaged shutter using 5 mm thick x 10 cm wide frosted glass strips and following aluminium powder coated sections conforming to catalogue of 'JINDAL' or of equivalent make and rubber beading etc complete all as specified and as directed. (a) SP 20048 (b) Glazing clips 19352

Dismantling of structural steel work including door gates framed truss etc. complete all as specified and as directed.

M&L for MS structural steel work, framed as in trusses, purlins, rafter etc. conforming to grade E-250 (Fe-410W, quality A) including shaped washers including necessary cutting required length, notching drilling, riveting and or welding or connecting with nut bolts with angle cleats, fish plate, gusset plate and also erecting in true position complete all as specified and as directed.

M &L for preparation of new steel surface & applying two coats of synthetic enamel to steel surface of any description over 10 cm in width or girth not otherwise described over a coat of red oxide primer complete all as specified and as directed.

Dismantling of AC sheet corrugated, or semi corrugated in roof covering complete all as specified and as directed.

S & F roof sheeting prepainted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and as directed.

Excavation in post holes each not exc 0.50 cum getting out in soft/hard soil incl returning filling in ramming / earth and removing surplus soil to a distance not exc 150m making good surface complete all as specified and as directed.

M&L for PCC 1:3:6 type C-2 (using 40mm graded stone aggregate) as in foundations filling and mass concrete complete all as specified and as directed.

Taking down wooden door shutter and refixing in including resecuring or easing and adjusting in the same opening.exc 1.00 but nexc 2.00 sqm each complete all as specified and as directed.

S&F aluminium powder coated fancy type curtain rod 25mm bore complete all as specified and as directed.

S & F aluminium powder coated brackets suitable for 25mm bore curtain rod (minimum projection from wall 75mm) fixed in wall including drilling, rawl plug, screws etc and repair the damaged surface and match with the existing complete all as specified and directed.

Taking down angle iron/ wooden chowkats or frames with shutters (without taking off shutters from the frame) exc. 1.5 sqm but not exc. 4sqm each and removed to store complete all as specified and as directed.

Taking down shutters of any description exc 1 sqm and not exc 2 sqm each complete all as specified and as directed.

S&F Pressed steel door frame of frame size 105x60mm with one or more revates incl necessary fixing, hinges, lock, strike plate filled with PCC 1:3:6 type C-0 etc complete all as specified and as directed.

S&F pressed steel frame 125x60mm for doors with one or more rebates incl necessary fixing lugs, hinges lock strike plate filled with PCC 1:3:6 type C-0 etc complete all as specified and as directed.

S&F 30 mm thick Flush shutters, solid core construction, with particle board core and one face is covered with decorative face veneer with lipping/frame to match, supplied and fitted to chowkats complete all as specified and as directed.

S & F 30 mm thick Iind class hard wood glazed and skeleton shutters, devided into squres with plain, chamfered or rounded mitered and rebated sash bars any numbers, open rebated prepared to receive guaze, edges of framing plain, chamfered or rounded , fitted with cut and mitered beads for securing glass etc size of members of shutters in SSR Part- I, Section 8, Clause 8.24 (a) complete all as specified and as directed.

S & F stainless steel wirecloth 0.36 mm nominal dia of wire and average width of aperature 1.40 mm & fixed with stainless steel wire stapples complete all as specified and as directed.

M & L preparing surfaces of wood or wood based material new or old if any description or girth treating end of post, back of chowkats etc with tar or coal tar black paint complete all as specified and as directed.

S&F solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet, reinforced with M.S square tube, supplying & fixing in opening as per specifications, drawings complete all as specified and as directed.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting, of frame made out of MS tubes for top & bottom rails MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width struck inside with solvent cement for steel & plain co lour PVC sheets for top rail, lock rail& bottom rail on either side & or gap insert for top rail & bottom rail, paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stile & rails with suitable PVC sheet banding, and joints to gather with solvent cement, supplying & fixing in the frame at site as per specification & drawing complete all as specified and as directed.

S&F 200 mm aluminium anodized barrel tower bolts of extruded section for door shutters complete all as specified and as directed.

S & F 300 mm long aluminium alloy , anodised sliding door bolt with hasp , staple( bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast - aluminium alloy and fixed complete all as specified and as directed.

S & F 150 mm extruded aluminium alloy handles, fabricated type anodised complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

M&L for coloured Ceramics tiles 450x300x7to8mm thick in vertical surfaces such as skirting dado set & jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles over and including 15mm thick rendering in cement mortar 1:4 on stone / brick/ concrete masonry surfaces complete all as specified and as directed.

M&L for non skid ceramic colored tiles 7to8mm thick, (square/ rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm in floor etc.set and jointed in neat cement slurry & pointed in white or coloured cement to match including 15mm thick screed bed or bedding layer as in CM 1:6 complete all as specified and as directed.

M&L for non skid ceramic colored tiles 7to8mm thick, (square/ rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm in floor etc.set and jointed in neat cement slurry & pointed in white or coloured cement to match including 15mm thick screed bed or bedding layer as in CM 1:6 complete all as specified and as directed.

Demolition of stone slabs and tiles of any description of thickness in floors, aprons etc laid bedded and pointed in any mortar complete all as specified and as directed.

M & L for granite ( of any type ) work ( table rubbed and polished ) 18 to 20 mm thick in steps, jambs, pillars, window cill , cooking platform and flooring in CM 1:4 including pointing in white cement 1:2 using marble dust with admixture of pigment to match with shade of granite with and including screed bed or bedding layer 15 mm thick, in CM 1:6 on stone masonry surfaces complete all as specified and as directed.

M&L for Machine cut cudappah stone slab 20 to 25mm thick, over cement screed base laid and jointed in grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing complete all as specified and as directed.

Taking up or down steel tubing 15 mm bore & connections complete all as specified and as directed.

S & F 15 mm GI tubing medium grade with all fittings & fixed complete to walls / ceiling or laid in floors all as specified & as directed

Taking up or down steel tubing 20 mm bore & connections complete all as specified and as directed.

S & F 20 mm GI tubing medium grade with all fittings & fixed complete to walls / ceiling or laid in floors all as specified & as directed.

S & F in repairs vitreous china squatting Pan " Orissa " pattern of size 580 mm X 440 mm white with integral foot rests (excluding flushing cistern and flush pipe) including provn of cement concrete bedding complete all as specified and as directed.

S&F sink without drainage board made of stainless steel, 1mm thick for kitchen or laboratory, with plug, waste pipe, washers and wastes, including bedding in cement mortar on to dwarf walls or including fixing cantilever brackets and connecting union to pipe overall size 550mm X 460mm with bowl size 410 mm X 330 mm X 160 mm complete all as specifed and directed. (Make : Nirali/Bluestar/Diamond).

S & F in repairs wash hand basins, vitreous china of size 550mm X 400mm ( flat back or angle back type) including cutting for and pinning in ends of brackets or erecting stand inclusive of supply and fixing waste pipe etc. complete all as specified and as directed.

S & F 15 mm bore pillar taps,fancy type swan neck spout (Left) and aerator, cat No. F2002104 of cera or of equivalent make specified here-in-after complete all as specified and as directed.

S & F in repairs 15 mm bore bib taps,fancy type cast copper alloy chromium plated with crutch or butterfly handle, screwed down and screwed for iron pipe or for brass ferrule complete all as specified and directed.

S & F 32 mm bore waste fittings brass chromium plated with long screwed shanks and fly nuts,screwed for iron pipe complete all as specified and as directed.

S & F in repairs 15 mm bore, 600 mm long PVC connections with PTMT nuts complete fixed to iron pipe at both ends complete all as specified and directed.

S & F in repairs 15 mm stop valves, fancy type cast copper alloy chromium plated with crutch or butterfly handle, screwed down and screwed both ends for iron pipe or for union complete all as specified and directed.

All as per item No. 45.00 above but concealed long shank complete all as specified and as directed.

S & F in repairs 10 ltr capacity PVC valveless, syphonic action type, flushing cistern, low level, white, including flush pipe 32 mm dia complete all as specified and as directed.

S & F gratings 100 mm dia of PTMT ( minimum wt 25 gms) complete all as specified and as directed.

S & F in repairs chromium plated soap dish fixed to plugs with chromium plated brass screws as fixed complete all as specified and as directed.

S & F in repairs 125 mm dia swivel type brass chromium plated shower rose of approved quality complete all as specified and as directed.

M & L for Cleaning of PVC water tank of capacity exc 250 but n.exc 500 ltr and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc. complete all as specified and as directed.

S & F in repairs ball valves high pressure of PTMT with epoxy coated, aluminium rod & high density plastic ball complete screwed for iron pipe or brass ferrule 20 mm bore complete( 210 gms weight) complete all as specified and as directed.

Demolition and breaking of drain pipes AC /CI/PVC set in cement mortar or adhensive all as directed of 75mm to 110 mm dia complete all as specified and as directed.

S & F 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls including dismantling of old pipes complete all as specified and as directed.

All as per item No. 54.00 above but 110 mm bore complete all as specified and as directed.

S & F 75 mm bore PVC (SWR) bends any radius complete all as specified & directed.

All as per item No. 56.00 above but 110 mm bore complete all as specified and as directed.

S & F 75 mm bore PVC (SWR) bends any radius provided with access door complete all as specified & directed.

All as per item No. 58.00 above but 110 mm bore complete all as specified and as directed,

S & F 75 mm bore PVC (SWR) vent cowl complete all as specified and as directed.

All as per item No. 60.00 above but 110 mm bore complete all as specified and as directed.

S & F Transparent Glass 7.5 x 7.5 inch corner bathroom shelves with bracket (set of 2) (Model- Joyo Cera Gls 132) complete all as specified and as directed.

S & F in repairs brass chromium plated Tubular towel rail 20mm dia "D" type 60cm long complete all as specified and as directed.

S & F towel ring square CAT No CAN 1121 N complete all as specified and as directed.

Demolition of cement concrete in ground floors and paving not exc 15cm thick (below or above ground level) un-reinforced complete all as specified and as directed.

M&L for 75mm thick PCC (1:3:6) type B2 (using 20mm graded aggregate) as in plinth protection/hard standing, finishing cement concrete surface even and smooth without using extra cement complete all as specified and directed.

Surface excavation n.exc 30 cm deep and averaging 15 cm deep and getting out in soft/loose soil complete all as specified and as directed.

M&L for 100mm thick PCC (1:4:8) type D-2 (using 40mm graded stone aggregate) as in sub base / flooring complete all as specified and as directed.

M&L for coloured precast cement concrete interlocking tiles 60mm thick, of any shape and size, conforming to IS-15658-2006 glossy finish as in floor/pavement laid on 50mm thick stone dust cushioning, laid dry to the profile over hard concrete sub base or rammed earth/murrum filling complete all as specified and as directed.

Anand Trading Co

M/s.BAJRANG CONSTRUCTION

PRASHANT CONSTRUCTION

Gauri Associates

L.K.R.TIWARI CONSTRUCTION

SARATH ENTERPRISES

M/s Omkar Associates

MANISH VEDPRAKASH ARORA

Reliable Enterprises