PERIODICAL SERVICES TO CAMOUFLAGED PAINTING OF CERTAIN BLDG IN TECH AREA UNDER GE AF TECH AREA AT AF STN AGRA

Amount

Taking down cement plaster in cement or cement lime mortar on brick or stone walls etc. including raking out joints, hacking for key, scrubbing down with water etc, and removal of debries to a distance exc 1.5 Km but not exc 5.0 Kmetc complete all as specified and as directed.

M&L for rendering 15mm thick in cement mortar 1:4 mixed with water proofing compound as per manufacture instruction on fair faces of brick work or concrete surfaces of external wall and finish the surface even and smooth without using extra cement all as specified and as directed. (WPC shall be measured and paid seperatly)

Supply only Integral water proofing compound.

M&L for preparation of new surface of walls (external surfaces) and applying Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) in camoflage pattern, as per manufactures instructions etc complete all as specified and as directed.

M&L for complete removal of existing treatment of old surface of wall including brooming down/ steel wire brushing, scrapping down smoke soot, mould, mos and efforescent salts and trading oil and greasy spots and cleaning with water (Height upto 25 Mtr) etc complete all as specified and as directed.

M&L for preparation of old surface of walls (external surfaces) and Finishing walls with Acrylic Smooth exterior camoflage paint of required shade, in two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) complete all as specified and as directed.

M&L for providing & applying average 1mm thick of Birla/ JK wall care putty over prepared surface to achieve the surface even and smooth for painting, complete all as specified and as directed

M&L for applying one coat of weather proof exterior emulsion paint in normal pattern/camouflage pattern by diluting of water (as per manufacturer direction). incl cleaning and ensure that the surface to be painted is free from any loose paint, and filling the surface, imperfections such as holes, dirt, fine cracks are to be filled with putty or mixture of white cement and fine sand (in the ratio of 1:3) complete all as specified and directed by Engr-in-charge

M&L preparation of old steel sheet roofing of CGI sheet/aluminium sheeting surfaces, iron /framed work of any description over 10 cm girth or width by scrubbing down the dust, dirt by wire brushing, sand paper etc to complete removal of rusting portion and apply two coats of synthetic enamel paint in normal pattern / camouflage pattern, over a coat of red oxide, zinc chrome primer complete all as specified and directed by Engr-in-charge. Note for all items :- (i) Any CI/AC/PVC pipes or pipe fittings damaged during the process of work shall be replaced by new one without any extra cost to the department. The decision of the GE at in this regard shall be final and binding. (ii) The labour employed by the contractor for carrying out the work shall be provided with safety equipment and quoted rate shall be deemed to be included the same. (iii) All window, joineries, mirrors, fittings and doors etc shall be covered before painting the surfaces and the same shall be cleaned including cleaning of floors as directed by the Engr in Charge, failing which a recovery shall be done from the RAR as decided by Garrison Engineer and quoted rate shall be deemed to be included of these provision. (iv) "Work to be carried out upto 25.00 meter hight with necessary MS scaffolding including all other safety precautions"

deva engineers

M/s Srijan Construction Company

M/S SINGH ELECTRIC CO

SUBASH MAHAJAN

C P Singh and Co

M/s K S Builders

Rakesh Kumar