Loading
Loading…
Loading…
| # | Company | Quoted % | Amount | Rank | Status |
|---|---|---|---|---|---|
| 1 | L1₹1.6 LAdmitted-Finance | -36.02% | ₹1.6 L | L1 | Admitted-Finance |
| 2 | L2₹1.8 L+₹18,050.37 (11.3%)Admitted-Finance | -28.80% | ₹1.8 L+₹18,050.37 (11.3%) | L2 | Admitted-Finance |
Tender Value
₹2.5 L
EMD Value
₹5,000
Closing Date
27 Jul 2026, 6:00 pmClosed
Er. Sandeep Gupta
XEN
Repair of Quarter No. 14 NGO colony Bakshi Nagar
2026_PWDJK_316114_2
eNIT NO. 40 of 2026-2027 Dated 15-07-2026
Open Tender
Civil Works
Percentage
30 days
Jammu
BOQ
2 documents required · 2 mandatory
₹600
Executive Engineer PWD R and B Division
₹5,000
Yes
12 Aug 2026
15 Jul 2026
28 Jul 2026
15 Jul 2026
27 Jul 2026
15 Jul 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Supplying providing fixing of pvc panelling of superior quality including cost of material labour etc complete job, | 369 | sft | 120 | ₹44,280 |
| 2 | Providing and fixing aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixed with dash fastener of required dia. and size including necessary filling up of gaps at junctions i.e, at top, bottom and sides with required EPDM rubber / neoprene gasket felt etc. Aluminum sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminum snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge (glazing, panelling and dash fasteners to be paid for separately.)
For fixed portion
Powder coated aluminum (minimum thickness of powder ]coated 50 microns) | 61.99 | kg | 514.3 | ₹31,878.89 |
| 3 | Providing and fixing aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixed with dash fastener of required dia. and size including necessary filling up of gaps at junctions i.e, at top, bottom and sides with required EPDM rubber / neoprene gasket felt etc. Aluminum sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminum snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge (glazing, panelling and dash fasteners to be paid for separately.). For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately.). Powder coated aluminum (minimum thickness of powder coated 50 microns) | 60.39 | kg. | 607.4 | ₹36,680.89 |
| 4 | Providing and fixing glazing in aluminum door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge. (Cost of aluminum snap beading shall be paid in basic item.). With float glass panes of 5.0 mm thickness (weight not less than 12.50 kg / sqm) | 6.92 | sqm | 1,201.8 | ₹8,316.46 |
| 5 | Supplying / providing/ fixing 4mm to 8mm thick ACP sheet of superior quality including material, labour, carriage, etc complete job | 24.86 | sft | 120 | ₹2,983.2 |
| 6 | Supplying /Providing and fixing wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of \Engineer-in-charge | 55.38 | sft | 60 | ₹3,322.8 |
| 7 | Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. | 11.39 | sqm | 18.7 | ₹212.99 |
| 8 | Providing and applying white cement based putty of specified thickness,of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
13.88.1 1 mm thick | 17.08 | Sqm | 138.1 | ₹2,358.75 |
| 9 | Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface. | 17.08 | Sqm | 66.85 | ₹1,141.8 |
| 10 | Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound) content less than 50 grams/ liter, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour.
13.90.2 Two coats | 37.96 | Sqm | 109.9 | ₹4,171.8 |
stage.html
html • 0.03 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.18 MB
BOQ_1029237.xls
BOQ • 0.31 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .