Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹16.5 LAccepted-AOC | L1 | Accepted-AOC The lowest bidder | |
| 2 | L2₹19.3 L+₹2.2 L (12.9%)Rejected-AOC H NO 24 BEHIND GURUDWARA JUTOGH CANTT SHIMLA HP 171008 | SHIMLA | HIMACHAL PRADESH | 171008 | L2 | Rejected-AOC Other than the lowest bidder | |
| 3 | L3₹20.6 L+₹3.5 L (20.4%)Rejected-AOC | L3 | Rejected-AOC Other than the lowest bidder |
Tender Value
₹20 L
EMD Value
₹40,000
Closing Date
15 Jun 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (I) JUTOGH
GE (I) JUTOGH, JUTOGH CANTT SHIMLA (HP) - 171008
REPAIR/ REPLACEMENT AND CERTAIN B/R WORKS IN THE AREA OF KELVIN GROVE, KUFRI AND SHIMLA UNDER GE (I) JUTOGH
2023_MES_593761_2
GE (I)/JUT-15 OF 2023-24
Open Tender
Civil Works
Item Rate
180 days
SHIMLA
CLASS E CATEGORY a (i)
6 documents required · 6 mandatory
₹500
GE (I) JUTOGH
₹40,000
Yes
13 Jul 2023
27 May 2023
17 Jun 2023
27 May 2023
15 Jun 2023
2 Jun 2023
27 May 2023 - 30 May 2023
Amount
Taking down cement or cement lime plaster on brick or stone walls, etc including raking out joints, hacking for key, scrubbing down with eater etc, of any height (G Floor to 3rd floor) including necessary scaffolding and T&P required to complete the work, complete all as specified and directed.
Demolition of brick or stone masonary built in cement mortar incl all quoins, arches, pillars, etc but excluding ashlar facing, dressed stone work and precast concrete block, at any height, complete all as specified and directed.
M&L for brick work with old size kiln burnt sub class 'B' bricks, straight or curved on plan exc 6 m in mean radius, built in CM 1:6 complete all as specified and directed.
M&L for brick work with sub class 'B' brick in cement mortar 1:6, straight or curved on plan to any radius in half brick thick wall built complete all as specified
M&L for rendering 15 mm thick on fair surfaces of brickwork or concrete surface in cement mortar 1:6 finished even and smooth without using extra cement. complete all as specified and directed.
M&L for rendering 15 mm thick on other than fair surfaces of brickwork or concrete surface in cement mortar 1:4 finished even and fair without using extra cement with including WPC as per manufacturer instructions, of any height (G Floor to 3rd Floor) including necessary scaffolding and T&P required to complete the work complete all as specified and directed.
Preparation of newly plastered surfaces of wall and applying two coats of distemper oil emulsion over a coat of alkali resistant priming paint and one coat of wall putty on wall surfaces including preparation of surfaces, complete all as specified and directed.
M&L for preparing of plastered or unplastered on new surface walls and applying two coats of weather proof paint on external surfaces including a coat of alkali resistant priming paint of any height (G Floor to 3rd Floor) including necessary scaffolding and T&P required to complete the work, complete all as specified and directed.
Supply only Liquid water proofing compound, complete all as specified and directed.
Demolition of cement concrete unreinforced of any description and in any position not otherwise specifically provided, complete all as specified and directed.
M&L for Rendering/screed bed 15mm thick in CM 1:3 in (Sunken slab) with water proofing compound as per manufacturer instruction's surface shall be finished even and smooth without extra cement, complete all as specified and directed. Note: Water proofing compound will be measured and paid separately.
M&L for applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2 Kg per sqm including cleaning surfaces etc. complete as in sunken portion, complete all as specified and directed.
M&L for PCC 1:5:10, type E-2, using 40mm graded crushed stone aggregate as in filling and mass aggregate, complete all as specified and directed.
S&F 1.5 mm thick PVC tiles/ sheets, laminated plain coloured, marbled mosaic or mottled finish, homogenious laid with approved rubber based adhesive in floors complete all as specified and as directed (including dismantling of old PVC sheet from floor and removing from site), complete all as specified and directed.
Demolition of cement concrete in ground floors or pavings n.exc 15cm thickness below or above ground level, complete all as specified and directed.
M&L for 50mm thick for PCC 1:3:6, type C-2, using 40mm graded crushed stone aggregate as in sub base, plinth protection and paving finished even and smooth without using extra cement, complete all as specified and directed.
M&L for 75mm thick PCC 1:4:8, type D-2, using 40mm graded crushed stone aggregate as in subbase of flooring, complete all as specified and directed.
M&L for chequered cement concrete tiles rubber moulded pre polished with lacquer finish pre polished glossy finish 30cmx30cmx22-25mm thick, set, jointed and pointed in neat cement slurry with grey cement and pigment in floors over 20mm thick screed bed in CM 1:6, complete all as specified and directed.
M & L for Machine pressed precast concrete interlocking paver block with lacquer finish pre polished glossy finish of any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade Machine pressed precast concrete interlocking paver block any shape and size with grey cement and pigment set, complete all as specified and directed.
M & L for sand filling under floors or in foundations including watering and consolidation, complete all as specified and directed.
Dismantling of floor hearth or wall tiling incl cement mortar bedding (but not backing) removing serviceable tiles to store & rubbish of the premises, complete all as specified and directed.
S&F vitrified ceramic-coloured tiles light shade, 7-8mm thick size 600X600 mm floors etc set & jointed in neat cement slurry & pointed in white or coloured cement to match including 15mm thick screed bed in CM (1:6), complete all as specified and directed.
S&F vitrified ceramic-coloured tiles light shade, 7-8 mm thick size 600X600 mm floors etc set & jointed in neat cement slurry & pointed in white or coloured cement to match on vertical surfaces such as skirting, dados and risers to steps over 10mm thick backing coat in cement mortar 1:4 etc. complete all as specified and directed.
M&L for coloured Non Skid Ceramic tiles 7 to 8mm thick (square/rectangular) area of each tiles exceeding 0.11 sqm but not exceeding 0.18 sqm , in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match fixed over and including screed bed 15mm thick in CM 1:6, complete all as specified and directed.
M&L for glazed ceramic coloured tiles joint free in vertical surfaces of size 350x250x7mm/ 450x300-350x7mm, 300x200x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10mm thick backing coat in cement mortar 1:4 complete complete all as specified and directed.
Demolition of Stone slabs and tiles of any description laid beded and pointed or thickness in floors, aprons etc. complete all as specified and directed.
M&L for granite (of any type) 19-20 mm thick one side machine polished in steps, jambs, pillars, window Cills, and top of kitchen platform and top of counter top wash basin etc set and jointed in neat cement slurry and pointed with coloured cement to match including 20mm thick screed bed in CM 1:6, complete all as specified and directed.
M&L for Machine cut pre polished Kota stone slab flooring 18-20mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing including 20mm thick screed bed with cement mortar 1:6 complete all as specified and directed.
M&L for pre polished Machine cut Kota stone slab flooring 18-20mm thick in skirting/dados and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing including 10mm thick backing coat in cement mortar 1:4 complete all as specified and directed.
M&L for rounding to edges of stone slabs one edge, such as in, cooking platform, and other similar situations, complete all as specified and directed.
Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc) or insulation boards/ slabs/ blankets, any thickness, including cover fillets or GI grid frame work, complete all as specified and directed.
S&F GI metal suspended ceiling system OREO GI lay in plain of make DEXUNE / HUNTER DOUGLAS / LINDNER 600 x 600x 0.5mm (TEGULAR) Edge tiles in global white colour to be laid on strong 24mm T-section flanges colour white having rotary stitching on the main runner with web height of 38mm. The tiles should have humidity resistance of 100% with light reflection of 62%, and incl necessary scaffolding of any height etc complete all as specified and directed. Note: (i) To comprise main runner spaced at 1200mm centres securly fixed to the structural soffit at 1200 mm maximum centre. The first/last suspension system at the end of each main runner should not be greater than 450mm from the adjacent wall. Flush fitting 1200 mm long cross tees to be interlocked between main runners at 600 mm centre to form 1200 x 600 mm module. Cut cross tees longer tahn 600mm require independant support. 600 x 600 mm module to be formed by fitting 600mm long flush fitting cross tees centrally between the 1200mm cross tees. Perimeter trim to be wall angles of size 3000 x 19 x 19mm, secured to walls at 450mm maximum centres. (ii) Suspension system accessories consisting of HLC sleeve anchor fasterners of thread size 6.5mm x 25/5 with soffit cleat made of galvanised steel of size 27 x 37 x 25 x 1.6mm and level clip in dimensions of 85x30x0.8mm with 4mm GI wire.
Demolition of cement concrete reinforced (reinforcement cut as required to facilitate demolition) of any description and in any position not otherwise specifically provided, complete all as specified and directed.
M&L for RCC 1:2:4, type B-1, as in chhaja and cover slab of manholes etc and in shelves and the like complete all as specified and directed.
M&L for Formwork flat rough finished surfaces of concrete to soffits of suspended slabs, roof slabs, landings and similar work, complete all as specified and directed.
S&F TMT bar 10 mm dia and over cut to length bent to shape required including cranking, binding spirally hooking end and binding with MS wire annealed not less than 0.9mm dia, complete all as specified and directed.
Dismantling plain or corrugated steel sheeting, with ridge, gutters, wall clading etc, any gauge, and thickness incl Nainital pattern roof covering, fixed with J/L hooks or coach screws, complete all as specified and directed.
S&F pre-engineered galvalume aluminium zinc coating GI based profile steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/clading to wall, in segment work fixed with self-tapping screws complete all as specified and directed.
S&F pre-engineered galvalume aluminium zinc coating GI based Plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, in segment work fixed with self-tapping screws as specified
Dismantling wrought iron or mild steel work of any description not otherwise provided, complete all as specified and directed.
S&F framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors frame, ladders, framed balusters, walk ways, railings, weldmesh, framework of water tanks and similar work conforming to Fe-290. Gde-E-165, complete all as specified and directed.
S & F rolled section as in framing for cladding, glazing and the like fixed with angle/Rectangular or Square pipe cleats and connecting plates etc of Gde Fe-410-W (Gde-E250 quality-A, complete for sheet fixing, complete all as specified and directed.
Taking down chowkat or frames with shutters without taking off shutters from the frames) n exc 1.5 Sqm each complete all as specified and directed.
Taking down chowkat or frames with shutters without taking off shutters from the frames) exc 1.5 Sqm and n exc 4Sqm each, complete all as specified and directed.
Taking down shutters of any description exc 1 Sqm and n exc 2 Sqm each, complete all as specified and directed.
S&F 2nd class hardwood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, complete all as specified and directed.
M&L for bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required, hooks (stay), heavy, for large gates, hook and pintle hinges, large hasps and staples, chains, hand made sliding bolts, clamps, hold fasts, wall ties, hooks for hanging fans, plain angle cleats for securing purlins to wood trusses or rafters, knee piece inserts, two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165, complete all as specified and directed.
M&L for PCC 1:3:6, type C-1, using 20mm graded crushed stone aggregate as in coping, block for hold fast block or similar work and finished the surface with existing and including form work, complete all as specified and directed.
S&F aluminium anodised powder coated sliding type three track window with shutter and frame including aluminium grill and mosquito proofing net and 5 mm thick tinted glass, size of frame 93.00 x 31.75 x 1.3 mm thick for top and sides, 93.00 x 31.75 x 1.3 mm thick, bottom and shutter frame 38 x 18 x 1.5 mm thick., Aluminium grill 6 mm dia design No DG-102 make DEDO grill or design No A-103 make aluminium grill fixed to 50 x 20 x 1.5mm thick including necessary handles, tower bolts, stopper etc complete all as specified and directed.
S&F factory made solid panel pvc door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame welded/ sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing, complete all as specified and directed.
S&F solid PVC door frame of size 50mmx47mm made out of 5mm wood grain printed PVC sheet used instead of Plain colour PVC Sheet & edges will be painted to match with printed sheet reinforced with MS square tube, complete all as specified and directed.
S&F Flush shutters,35 mm thick, solid core construction, with block board core and plywood face panels, commercial type on both sides with 2nd class hardwood lipping/frame to match complete all as specified and directed.
S&F glazed and skeleton shutters 35mm thick 2nd class Hard wood open rebated and prepared to receive glass, gauge etc. edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass etc. sized of members of shutter with three number of panels complete all as specified and directed.
S&F Galvanized mild steel wire cloth 0.56 mm nominal dia of wire and average width of apertures 1.18 mm fitted with tinned tacks or galvanised wire staples, complete all as specified and directed.
S&F in repair Galvanized mild steel wire cloth 0.56 mm nominal dia of wire and average width of apertures 1.18 mm fitted with tinned tacks or galvanised wire staples in steel, wooden and aluminium frame work, complete all as specified and directed.
Hacking out old broken glass (any thickness, size, quality or description) from wooden frames, glazed with putty or fixed with beads, of any height including necessary scaffolding and T&P required to complete the work, complete all as specified and directed.
S&F sheet glass ordinary quality 4 mm thick glazing in square/ rectangle n.exc 0.50 sqm each pan with oil putty or aluminium beads fixed to steel and wooden of any height including necessary scaffolding and T&P required to complete the work, complete all as specified and directed.
S&F figured glass ordinary quality 4 mm thick glazing in square/ rectangle n.exc 0.50 sqm each pan with oil putty or aluminium beads fixed to steel and wooden of any height including necessary scaffolding and T&P required to complete the work, complete all as specified and directed.
S&F mild steel sliding door bolts plate type stove enamelled black with bright bolt not less than 12 mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate 250mm long, complete all as specified and directed.
S&F 300mm ordinary rat rail pattern springs including roller and roller plate, complete all as specified and directed.
S&F aluminium extruded alloy handles fabricated type anodised 150mm long, complete all as specified and directed.
S&F butt hinges medium weight cold rolled mild steel powder coated of 100mm size, complete all as specified and directed.
S&F Butt hinges 100mm long, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21, complete all as specified and directed.
S&F aluminium anodized barrel tower bolt of extruded section of size 200mm long, complete all as specified and directed.
S&F aluminium anodized barrel tower bolt of extruded section of size 150mm long, complete all as specified and directed.
S&F aluminium door stoper fixed in wooden/aluminium door shutters with screws, complete all as specified and directed
M&L for preparation of new wooden surfaces not otherwise described, over 10cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer, complete all as specified and directed.
M&L for preparation of new steel surface of any description over 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
Taking up or down 15mm bore, steel water tubing & connections, complete all as specified and directed.
Taking up or down 20 bore, steel water tubing & connections, complete all as specified and directed.
S&F CP grating doom 100mm dia complete all as specified and directed.
Refixing old steel tubing 15mm dia and connections in new or old position (walls, ceiling, floors etc.) complete all as specified and directed.
Refixing old steel tubing 20mm dia and connections in new or old position (walls, ceiling, floors etc.) complete all as specified and directed.
S&F steel water tubing medium grade galvanised with all fittings and fixed complete to walls, ceiling or laid in floors of 15mm bore, complete all as specified and directed.
S&F steel water tubing medium grade galvanised with all fittings and fixed complete to walls, ceiling or laid in floors of 20mm bore, complete all as specified and directed.
S & F in repair 15mm bore concealed stop valve fancy type chromium plated screwed down high pressure with crutch or butter fly handle screwed both ends for unions pipe fitted complete all as specified and directed.
S & F in repair 15mm bore CP bib tap fancy type chromium plated long body cast copper alloy with capstan head handle screwed for iron pipe or for brass ferrule complete all as specified and directed.
S & F in repair 15mm brass CP wall mixer for mixing hot and cold water with hand shower complete all as specified and directed.
S & F in repair 15mm brass CP basin mixer for mixing hot and cold water, complete all as per specified and directed.
S& F in repairs 15mm dia and 600mm long PVC connection pipe with PTMT nuts, complete all as specified and directed.
S&F in repairs vitreous China wash down water closet (pedestal pattern) coloured including all fittings, fixing bolts, waste pipe, inbuilt fluhsing cistern and flush pipe complete all as specified and directed.
S&F in repairs vitreous China wash basin pedastal pattern super white/ colour of size 560x475mm including all fittings complete, decorative type complete, fixed complete all as specified and directed.
M&L for 20 mm dia stainless steel, curtain rod incl same brackets, stops & rollers, complete all as specified and directed.
S&F 21–22-inch dia galvanised mild steel pan mortar (Tasla/ghamela) not less than 1mm thick with for 04 Nos bolt of 5-6mm dia with 8 Nos nut bolt with 8 Nos washer including fixing on water storage tank as tank cover, complete all as specified and directed.
S&F in repair CP brass jet spray (health faucet) with flexible pipe 1.50m long fixed to EWC suitable for 15mm bore of pipe, complete all as specified and directed.
S&F in repairs sink with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and waste coupling/waste pipe, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm, complete all as specified and directed.
M&L for 1.25mm Steel rolling shutters, with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer, erected in position as indicated, complete: push pull or manual type including taking down existing rolling shutter, complete all as specified and directed.
Fixing only 1.25mm Steel rolling shutters, with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer, erected in position as indicated, complete: push pull or manual type including taking down existing rolling shutter, complete all as specified and directed.
S & F Safety lever locks mild steel with 4 levers for rolling shutters, complete all as specified and directed.
S & F Ball bearing for rolling shutters, complete all as specified and directed.
Dismantling of water tanks exc 250 ltrs capacity but not exc 500 ltr capicity and removal at site, complete all as specified and directed.
S&F 500 litres capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) double layered hoisted and fixed in position, complete all as specified and directed.
Dismantling of water tanks exc 500 ltrs capacity but not exc 1000 ltr capicity and removal at site, complete all as specified and directed.
S&F 1000 litres capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) double layered hoisted and fixed in position, complete all as specified and directed.
S&F in repair sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated brackets, bracket guard and railing 60cm long incl screws, complete all as specified and directed.
S&F bathroom glass corner shelf in tringle shape,set of three with chromium plated brass screws, and cup wasgers complete all as specified and directed.
S&F in repairs pre-laminated particle board 19mm thick, interior grade pre laminated one side with decorative choice laminations and other side balancing white lamination, fixed with screws to timber / steel frame work as in shelves or shutters or wall panelling, complete all as specified and directed.
S&F continuous piano hings, mild steel, bright finish or electro galvanised, with open flap width 30mm, fixed with screw, complete all as specified and directed.
S&F magnetic catches 75 mm brass body for use in cup boards of kitchen, ward robes etc., complete all as specified and directed .
S&F 40mm dia cupboard knob of brass, polished, fixed with nut screw and washer, fixed, complete all as specified and directed.
S&F aluminium hook and eye anodised 150mm size, complete all as specified and directed.
S & F in repair stainless steel plate rack (utencil rack for kitchen of size 750 x 600 x 250mm and min 0.80 to 1.00 mm thick fixed with stainless steel screw and rawl plug complete as specified and directed.
Dismantling timber scantlings in any position in fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section (unframed work), complete all as specified and directed.
M&L for IInd class hard wood plain fillet square or rectangular in section clean sawn sectional area exc 13sqcm and n. exc. 25 sqcm secured with nails or brads complete all as specified and directed.
S&F 25mm thick IInd class hardwood wooden planks, width n.exc 20cm etc, complete all as specified and directed.
S&F in repair 4.5mm thick PVC mat with standard line marking and incl all necessary required for proper surface finished, complete all as specified and directed.
S&F in repair 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall/floor including elbow, bend, tee, socket & clamps etc,necessary required scaffloding, complete all as specified and directed.
S&F in repairs double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty, complete all as specified and directed.
S&F in repairs brass chromium plated tubular towel rail 20mm dia, 'D' type, 60 cm long between flanges, complete all as specified
M&L for mild steel sheet eaves gutters, 1.25 mm thick, 150mm dia, sheet galvanised class 3, half round with rounded edges, incl suitable of brackets for gutter, complete all as specified and directed.
M&L for 25mm thick PCC 1:2:4, type B-1, using 20mm graded crushed stone aggregate, as in sub base for floors, complete all as specified and directed.
M&L for Non Skid coloured ceramic tiles 7 to 8mm thick (squares/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and incl 15mm thick screed bed in CM 1:6, complete all as specified and directed.
M&L for Non Skid coloured ceramic tiles 7 to 8mm thick (squares/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, fixed over and including 10mm thick rendering in CM 1:4 on vertical surface such as skirting/dado set and jointed in neat cement slurry and pointed in white cement mixed with colour pigment to match the surface complete all as specified.
M&L for RCC 1:2:4, type B-1, as in columns/ beams/ slab, landings and in shelves and the like, complete all as per specified and directed.
M&L for applying Two or more coats of 100% Premium acrylic emulsion paint (weather proof paint on external surfaces) having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces at any height of building / tower complete all as specified and directed.
S&F Solid PVC Wall Lining consisting of 5mm thick plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing, incl where as required fillet (cross section area 6 to 13 Sqcm) & beading, complete all as specified and directed.
S & F 0.63 mm thick galvanized, corrugated mild steel sheeting with two corrugation side lap fixed with with coach screws and washers, in roofs, walls etc. with grade of Zinc coating 120 GSM complete all as specified and directed.
S&F plain, galvanised, 0.63mm thick,mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings and facia board ornamental type (length and girth as fixed) with grade of Zinc coating 120 GSM, bent to shape as required, fixed with coach screws and washers in roofs and wall etc., complete all as specified and directed.
S & F in repair sink with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastecoupling/waste pipe; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.
Dismantling timber scantlings ,framed/unframed work of size 40 sqcm and over in section, in any position with nails etc complete all as specified and directed.
S&F structural steel work as in roof trusses (framed), trussed, purlins crane gantries, rails & fastenings & heavy brackets framimg (Beam, tee, angle, channel or flat section) including distance pieces, cleats etc. Structural steel conforming to Fe-410W, Grade-E 250, Quality 'A', etc., complete all as specified and directed.
Taking down shutters only of size exc.1 sqm and n. exc 2 sqm each and refixing in same opening after necessary repair, complete all as specified and directed.
M&L for framed work as in doors frame/chowkats or gates of angle or other section with gusset plates , rails , braces etc complete drilled for fixing of steel sheeting etc of Fe 410-W (Gde- E- 250), complete all as specified and directed.
S&F steel windows with side hung shutters including box type hinges with MS handles, MS peg stay with glazing bars, complete all as specified and directed.
S & F steel window with side hung shutter including projecting type hinges with steel handle and steel peg stay complete without galzing bars dovetailed or welded complete all as specified and directed.
S&F factory made steel ventilator with top hung shutters including box type hinges with steel handle, and steel peg stay, complete with glazing bars complete all as specified and directed.
S&F 35mm thick, IInd class hard wood, plain framed, panelled shutters (any numbers of panels), with panels of timbers flat on bith sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers, complete all as specified and directed.
Dismantling boarding any description, fixed in any position with nails for cupboards complete all as specified and directed.
S&F block board 18/19 mm thick, grade 2 quality, 'interior grade', decorative type with decorative face veneer on one face, fixed with nails/ screws sin cup board shutter/ pelmets etc. or to timber frame work, incl sunmica complete all as specified and directed
S&F Hasp and staple 100mm safety type, aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws, complete all as specified and directed.
S&F Butt hinges 75mm long, extruded aluminium alloy with galvanised mild steel hinge pin, anodisedand fixed, type C-21, complete all as specified and directed.
S&F in repair 20mm ball valves high pressure of PTMT with apoxy coated aluminium rod and high density plastic ball screw for iron pipe mini weight for 210 gms, complete all as specified and directed.
M&L for cleaning and removing all scale and dirt etc. from tanks and from mounts of circulating pipes etc. capacity of tanks exc. 250 Ltr and nexc. 500 ltr complete all as specified and directed. Note : Any damage to FV, pipe etc shall be make good by the contractor.
M&L for cleaning and removing all scale and dirt etc. from tanks and from mounts of circulating pipes etc. capacity of tanks exc. 500 Ltr and nexc. 1000 ltr complete all as specified and directed. Note : Any damage to FV, pipe etc shall be make good by the contractor.
S&F in repair stop valve 20mm nominal bore, cast copper alloy, screwed down high pressure with cluch or butterfly handle screwed both ends for iron pipes or for unions and fixed, complete all as specified and directed.
S&F in repairs cast copper alloy chromium plated Angle valve 15mm dia with round headed knobs complete all as specified and directed.
S&F in repair 15mm pillar taps, fancy type, cast copper alloy, with capstan heads, CP screwed down high pressure, with or without lettered Hot or Cold with long screwed shanks and fly nuts screwed for iron pipe, complete all as specified and directed.
S&F 60 cm long (PVC connection) 15 mm bore with PTMT nut, complete all as specified and directed.
S&F in repair 90 cm long PVC waste pipe 32 mm bore with PTMT nut complete all as specified and directed.
S&F in repair colour/ plain EWC vitreous china wash down water closet pan padestal pattern white with complete fitting including P or S Trap and fixing with brass screw, complete all as specified and directed.
S&F in repair Plastic water closet seat covers flat bottom with mild steel chromium plated or aluminium anodised hinge device, complete all as specified and directed.
S&F in repair of vitreous china squatting pan ‘Orrisa pattern’ size 580 x 440 mm white with integral foot rest including replacement of ‘P’ or ‘S’ CI trap, lime concrete bedding and making good floor, complete all as specified and directed.
S&F PVC valve less, syphonic action type low level flushing cistern, white with inlet ball valve , float handle , including brackets 10 ltr capacity including 32 mm PVC flush pipe complete all as specified and directed.
S&F in repair vitreous china wash hand basin including brackets, white, size 550x400 mm, incl brackets cutting for and pinning in ends of brackets, CP brass waste coupling and waste pipe of strandard length, complete all as specified and directed.
S&F in repair 75mm bore, PVC (SWR), floor trap with grating including jointing with solvent cement complete all as specified and directed.
S & F 75 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints laid in tranches or in floor, complete all as specified and directed.
S&F PVC (SWR) bends 110 mm bore with access door complete all as specified and directed.
S&F PVC (SWR) bends 75 mm bore with access door complete all as specified and directed.
Disconnecting existing tanks, setting aside (or lowering if required) for repair, cleaning, etc. and hoisting if required reconnecting and refixing in position of cap exc. 250 Ltr nexc. 500 ltr, complete as specified and directed.
M&L for bitumen flash strip 100MM width, 10mtr long for repairs of roof sheet (any type) leakage in patch work and applying as per direction of Engineer-in-Charge, complete all as specified and as directed.
M/S J.S.ENTERPRISES
NIRMAL SINGH BHOGAL AND SON
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .