Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹8.9 CrAdmitted-Finance | ₹8.9 Cr | L1 | Admitted-Finance |
| Sl No | Description | Qty | Unit | REHMAN BUILDERS PRIVATE LIMITED L1 |
|---|---|---|---|---|
| 1.01 | Supply of submersible pump set coupled with wet type motor suitable for pumping treated effluent water operation on 3 phases, 415 volt, 50Hz, 1480 RPM, Delivery- 250mm with discharge of 947cubic mtr/hr (5 MGD) at head of 30 mtrs. The pump shall be capable of handling 100 mm size solids, the material of constriction with test report 2.2 to EN 10204. Stationary with dual SS guide pipe of required size and SS chain of 10 Mtrs length . 15 mtr length of 02 Nos. power Cable & 01 No. of control cable of suitabel size and specifications along with starter panel/control unit outdoor use canopy type comprising of star delta starter, MCBs, MCCBs, Single phase preventer, Ammeter, voltmeter, over load relay and other required accessories duly wired and painted (suitable for above pump). Duckfoor bend, Integral Bend & auto coupling / portable skirt base with 900 Bend as per site requirement. ) Make: KSB/Mody/Aqua/Darling/Any approved make of DJB | 3 | Nos. | 66,03,669 ₹73,96,109.28 Lowest |
| 1.02 | Supply of sluice valve, non-rising with SS spindle flanged ends of size 250 mm PN 1.0 MAKE: Jupiter/Kirloskar / IVC/ Any approved make of DJB | 3 | nos. | 2,42,571 ₹2,71,679.52 Lowest |
| 1.03 | Supply of sluice valve, non-rising with SS spindle flanged ends of size 600 mm PN 1.0 MAKE: Jupiter/Kirloskar / IVC/ Any approved make of DJB | 1 | nos. | 6,66,195 ₹7,46,138.4 Lowest |
| 1.04 | Supply of sluice valve, non-rising with SS spindle flanged ends of size 200 mm PN 1.0 for dewatering of header line. MAKE: Jupiter/Kirloskar / IVC/ Any approved make of DJB | 1 | nos. | 57,700 ₹64,624 Lowest |
| 1.05 | Supply of C.I. NRV without bye pass swing type flanged ends of size 250 mm PN 1.0 MAKE: Jupiter/Kirloskar / IVC/ Any approved make of DJB | 3 | nos. | 2,04,720 ₹2,29,286.4 Lowest |
| 1.06 | Supply of C.I. NRV without bye pass swing type flanged ends of size 600 mm PN 1.0.MAKE: Jupiter/Kirloskar / IVC/ Any approved make of DJB | 1 | nos. | 6,25,000 ₹7,00,000 Lowest |
| 1.07 | SITC of CI Kinetic air valve with isolating sluice valve of size 100 mm. MAKE: Kirloskar/ IVC/ Any approved make of DJB | 1 | nos. | 40,500 ₹45,360 Lowest |
| 1.08 | Supply & fixing of sluice gate 1000mmx1000mm in effluent sump channel. Make:- Jash/IVC/Vag Any approved make of DJB | 1 | Job | 8,46,560 ₹9,48,147.2 Lowest |
| 1.09 | SITC of electromagnetic flow meter with complete accessories having size 500 mm dia. Make:- Krohne marshall/ Any approved make of DJB | 1 | Job | 5,75,900 ₹6,45,008 Lowest |
| 1.10 | supply of 150 mm pressure guage with all accessories. Make: Hguru/FIEBEG/Wika | 4 | Nos. | 9,200 ₹10,304 Lowest |
Tender Value
₹6.5 Cr
EMD Value
₹12.9 L
Closing Date
28 Mar 2022, 3:00 pmClosed
EE(C)SDW-NW
O/o EE(C)SDW-NW, Delhi Jal Board, Shalimar Bagh SPS Opp RBI Colony Delhi-110088
Providing, laying and jointing treated effluent water rising main including installation of pump sets and allied works from Keshopur STP for rejuvenation of Paschim Vihar Lake in DDA District Parks. (RE-INVITE)
2022_DJB_218007_1
PRESS NIT NO.59 (21-22)
Open Tender
Composite Works
Lump-sum
180 days
KESHOPUR
as per tender documents.
2 documents required · 2 mandatory
₹1,500
sab paisa/ Allahabad Bank
₹12.9 L
CE(SDW)NW, FIRST FLOOR KESHOPUR STP
13 Apr 2022
4 Mar 2022
28 Mar 2022
4 Mar 2022
28 Mar 2022
4 Mar 2022
11 Mar 2022
Supply of submersible pump set coupled with wet type motor suitable for pumping treated effluent water operation on 3 phases, 415 volt, 50Hz, 1480 RPM, Delivery- 250mm with discharge of 947cubic mtr/hr (5 MGD) at head of 30 mtrs. The pump shall be capable of handling 100 mm size solids, the material of constriction with test report 2.2 to EN 10204. Stationary with dual SS guide pipe of required size and SS chain of 10 Mtrs length . 15 mtr length of 02 Nos. power Cable & 01 No. of control cable of suitabel size and specifications along with starter panel/control unit outdoor use canopy type comprising of star delta starter, MCBs, MCCBs, Single phase preventer, Ammeter, voltmeter, over load relay and other required accessories duly wired and painted (suitable for above pump). Duckfoor bend, Integral Bend & auto coupling / portable skirt base with 900 Bend as per site requirement. ) Make: KSB/Mody/Aqua/Darling/Any approved make of DJB
Supply of sluice valve, non-rising with SS spindle flanged ends of size 250 mm PN 1.0 MAKE: Jupiter/Kirloskar / IVC/ Any approved make of DJB
Supply of sluice valve, non-rising with SS spindle flanged ends of size 600 mm PN 1.0 MAKE: Jupiter/Kirloskar / IVC/ Any approved make of DJB
Supply of sluice valve, non-rising with SS spindle flanged ends of size 200 mm PN 1.0 for dewatering of header line. MAKE: Jupiter/Kirloskar / IVC/ Any approved make of DJB
Supply of C.I. NRV without bye pass swing type flanged ends of size 250 mm PN 1.0 MAKE: Jupiter/Kirloskar / IVC/ Any approved make of DJB
Supply of C.I. NRV without bye pass swing type flanged ends of size 600 mm PN 1.0.MAKE: Jupiter/Kirloskar / IVC/ Any approved make of DJB
SITC of CI Kinetic air valve with isolating sluice valve of size 100 mm. MAKE: Kirloskar/ IVC/ Any approved make of DJB
Supply & fixing of sluice gate 1000mmx1000mm in effluent sump channel. Make:- Jash/IVC/Vag Any approved make of DJB
SITC of electromagnetic flow meter with complete accessories having size 500 mm dia. Make:- Krohne marshall/ Any approved make of DJB
supply of 150 mm pressure guage with all accessories. Make: Hguru/FIEBEG/Wika
Supply, installation, testing and commissioning of Ductile iron delivery piping complete with flanged fittings, dismantaling joint, gaskets bolts & nuts etc., including specicals:- DI Pipe 250 mm dia
Supply, installation, testing and commissioning of Ductile iron delivery piping complete with flanged fittings, dismantaling joint, gaskets bolts & nuts etc., including specicals: DI Pipe 600 mm dia
Supply of DI heavy Bend of siz 250x250 mm (ii) Supply of DI dead flanges of size 600mm (iii) Supply of DI reducer/increaser of size 500x6000mm
Supply of rubber packing for flange joint as per site requirement.
Supply of nut & bolts with washers of different size.
Supply of rubber insulating mat for electrical purposes of size 1000x2000x10mmthick Make: Jyoti/Vardhman/Voltmat
Earthing will G.I. plate 600mmx600mmx6mm thick including accessories and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 mtrs. long etc with charcoal/ coke and salt as required.
Supplying & laying 25mm x 5mm G.I. strip at 0.50 mtrs. bellow ground as earth electrode. Including connection/terminating with G.I. nut bolts as required.
Supplying and installing following size of perforated HotDipped Galvanised Iron cable tray (Galvanisation thickness not less than 50 microns) with perforation not more than 17.5%, inconvenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required. 150 mm width X 50 mm depth X 1.6 mm thickness.
Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray "bends" ( galvanisation not less than 50 microns) with perforation not more than 17.5%, inconvenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required. 150 mm width X 50 mm depth X 1.6 mm thickness.
Supply of P.V.C insulated & PVC sheathed aluminum conductor armored heavy dusty XLPE insulated power cable of 1.1 KV grade of size 240 sq. mm x 3.5 core. MAKE: Havells/Grandly/Polycab/Any other DJB approved make
Laying of 3.5 core x 240 mm cable in ground from existing LT Panel of STP up to the proposed SPS with end termination on both side.
Lighting and Electrification in & around the effluent pumping station with following works::-Supplying of 30 watt. LED street light fitting with complete accessories as required. MAKE: usha/Orient/Havells/Philips
Supplying and fixing 32mm dia. X 2 mtrs. long G.I. pipe medium class bracket for mounting of L.E.D. street light fitting on road/walls including bending of pipes to the required shape, 2 no. 40mmx3mm flat iron clams with nut bolt and washer as required.
Supply of 600 mm air circulator fan wall mounting type. Make: Almonard/Polycab/Orient/Any other DJB approved make
Supply of 18’’ heavy duty exhaust fan, 1400 RPM. Make: - Almonard/crompton/orient
S/o 1x18 Watt 4 ft LED Fitting with tube, box type with electronic driver. Make: Havells/Usha/Philips/Orient
Supply & drawing Internal and external wring of pump house with 20 nos. light point, 10 Nos. of 5A and 15A plug points with GI Boxes, 8 nos. LED Types florescent tube light fitting 4 nos., 18 W LED, 2 nos. Air circulator fan, 02 Nos. Exhaust fans, 6 Nos. 30 w LED street light fixing &grouting of suitable accessories with copper wires, MCBs, Switch gears as per site requirement
SITC of 3 Ton EOT crane with girder and supporting pillars. Make:- Morris/Indef/Wester/ Any approved make of DJB with following specifications: Capacity:3Ton Lift: 12 Mtrs, Support Pillars: C channel 210 mm, 4 mtrs, CT Girder: NPB-400mm Size- 10 Mtrs
Supply of 4.5 kg capacity CO2 types fire extinguishers complete with charging and accessories as required. MAKE: Agni yodha/Safeguard/Safety plus/Any other ISI Marked
First aid box with all accessories. Make: St Johns/ExFlame/W warsi/Any other ISI Marked
Bidder Name
Amount
REHMAN BUILDERS PRIVATE LIMITED(GSTN-07AACCR1030J1ZQ)
stage.html
html • 0.03 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 2.02 MB
BOQ_280729.xls
BOQ • 0.35 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .