Murrum, Metalling and Ashphalting Road From Shivanur - Kalloti road To Kareppan Tota Road Km 0.00 To 2.00 at Shivanur Village in Athani Taluka of Belagavi Dist.

Murrum, Metalling and Ashphalting Road From Shivanur - Kalloti road To Kareppan Tota Road Km 0.00 To 2.00 at Shivanur Village in Athani Taluka of Belagavi Dist.

code01 Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceabl... 24.15 100 Sqm

code02 Scarifying Existing Granular Surface to a Depth of 50 mm by Mechanical Means using Hydraulic excavator etc complete as per direction of the Engineer incharge of the work. 10350.00 Sqm

code03 Construction of Embankment by excavating the available approved Gravel/Murrum deposited at a

place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading... 2587.50 Cum

code04 Construction of sub-grade and earthen shoulders with approved material obtained from borrow pits with all lifts & leads, transporting to site, spreading, grading to required slope and compacted to mee... 254.48 Cum

code05 Water Bound Macadam Grading-I (63 mm to 45 mm) Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thic... 228.15 Cum

code06 Water Bound Macadam Grading-II (53 mm to 22.4 mm) Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform t... 219.38 Cum

code07 Prime Coat over WMM/WBM Providing and applying primer coat with SS1 grade Bitumen Emulsion on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.... 2925.00 Sqm

code08 tack coat on Bituminous surface Providing and applying tack coat with RS1 Bituminous Emulsion using emulsion pressure distributor at the rate of 0.20 kg/m2 on the prepared bituminous surface cleaned ... 2925.00 Sqm

code09 Providing, laying and rolling of open - graded premix surfacing of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using viscosity grade bitumen VG-30 to required line, grade and level... 2925.00 Sqm

code10 Seal Coat Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type A and B seal coats with bituminous binder VG-30 Type B ... 2925.00 Sqm

code11 Providing and fixing board displaying information, such as 'Name of work, Tender cost, Name of Contractor, Work completion and liability period etc', having rectangular shape of 1.20m x 0.90m size mad... 1.00 Nos

Murrum, Metalling and Ashphalting Road From Shivanur - Kalloti road To Kareppan Tota Road Km 0.00 To 2.00 at Shivanur Village in Athani Taluka of Belagavi Dist.

code01 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li... 20.74 Cum

code02 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggrregates as per relevant I... 3.16 Cum

code03 Providing and laying in Cement Concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/basalt crushed graded coarse aggregates and fine aggr... 12.49 Cum

code04 Providing and laying reinforced cement concrete pipe NP3 for culverts on first class bedding of granular material insingle row including fixing collar with cement mortar 1:2 but excluding excavation, ... 7.50 m

code05 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r... 7.24 Cum

code06 Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, ty... 474.80 Kg