Beatification to Neera Left Bank Canal in Muncipal Area Baramati Tal. Baramati Dist.Pune

Amount

Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 milimetre, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned up to a lead of 1000 metres including removal and disposal of top organic soil not exceeding 150 milimetre in thickness.

Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 metre beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting, dewatering etc. complete. (Lift upto 1.5 metre) by Mechanical Means..

Excavation for foundation in hard murum including removing the excavated material upto distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting, dewatering etc. complete. (Lift from 1.5 metre) by Mechanical Means..

Construction of granular sub-base by Plant Mix Method by providing close graded Material, mixing in a mechanical mix plant at Optimum Moisture Content, carriage of mixed Material to work site,spreading in uniform layers with Motor Grader/ Paver on prepared surface and compacting with vibratory power roller to achieve the desired density complete as per clause 401.For Grading I Material.

Providing and laying white / off white Sea sand in Play Area or required locations in Gardens, as per the instructions given by the garden department, inclusive of material, Labour, Transportation, Taxes, etc all complete

Stamp Concrete of 100 mm Thickness - Providing and Laying in-situ M-30 Grade unreinforced plain cement stamp concrete of 100 mm thickness pavement over a prepared sub-base with 43 grade cement, coarse and fine aggregate (natural sand / VSI grade finely washed crushed sand) conforming to IS:383, as per mixed in a batching and mixing plant/ non tilting mixer and weigh batcher as per approved mix design, admixtures, transporting to site, including spreading, laying with approved make paver, compacted and finished in a continous operation, finishing to lines and grades. Also Providing, Placing and applying stamp powder which is light fast UV resistant pigment with appropriate chemical compounds of desired colour on base concrete after excess bleed water has evaporated using dry shake method @5kg per sqm. Including texturing and covering with plastic sheet (min. 200 micron thickness) and also applying two coats of UV-stable, 30% solids clear sealer @ 150 to 250 gms per square metre using surface roller and protecting from falling dust,dirt and curring by curring compound/ by providing cement vata in cement Mortor 1:8 @ 0.6 meter x 0.6 meter center to center, admeasuring 80 Millimeter at bottom and 40 Millimeter at top with depth of 75 mm and maintaining the same throughout curing period by any other method approved by Engineer-incharge or Landscape architect etc. complete. (Prior approval of superinteding Engineer will be necessary).

Providing and fixing heavy duty inter locking concrete Rubber mould glossy paving blocks of 80 milimetre thickness of having a strength of 400 kilogram per square centimetre of approved quality and shape on a bed of crushed sand of 25 to 30 milimetre thick including skirting joints and cleaning etc. complete using 100 percent crushed sand.

Providing and laying Cast in situ/ Ready Mix cement concrete in Mix- 10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, formwork, laying/ pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based Programmable Logic Controller with Superwisery Control and Data Acquisition enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand V.S.I. Grade).

Transportation of Excavated Soil

Providing dry/ trap/ granite/ quartzite/ gneiss rubble stone soling 15 centimetre to 20 centimetre thick including hand packing and compacting etc. complete.

Providing and laying in situ/ Ready Mix cement concrete Mix-25 of trap/ granite/quartzite/ gneiss metal for Reinforced Cement Concrete work in foundations like raft, strip foundations, grillage and footings of Reinforced Cement Concrete columns and steel stanchions etc. including bailing out water, formwork, laying/ pumping cover blocks, compaction and curing roughening the surface if special finish is to be provided, (Excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based Programmable Logic Controller with Superwisery Control and Data Acquisitionenabled Reversible Drum Type mixer/ concrete Batch Mix plant (Pan mixer) etc. complete, with fine aggregate (Crushed sand V.S.I. Grade).

Providing and laying cast in situ/ Ready Mix cement concrete Mix-25 of trap/ granite/ quartzite/ gneiss metal for Reinforced Cement Concrete columns as per detailed designs and drawing or as directed including centering, formwork, cover blocks, laying/ pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete, (Excluding reinforcement and structural steel) with fully automatic micro processor based Programmable Logic Controller with Superwisery Control and Data Acquisitionenabled Reversible Drum Type mixer/ concrete Batch Mix plant (Pan mixer) etc. complete with fine aggregate (Crushed sand V.S.I. Grade).

Providing and laying Cast in situ/ Ready Mix cement concrete Mix-25 of trap/ granite/quartzite/ gneiss metal for Reinforced Cement Concrete Beams and Lintels as per detailed designs and drawings or as directed including centering, formwork, cover blocks, laying/ pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel), with fully automatic micro processor based Programmable Logic Controller with Superwisery Control and Data Acquisitionenabled Reversible Drum Type mixer/ concrete Batch Mix plant (Pan mixer) etc. complete with fine aggregate (Crushed sand V.S.I. Grade).

Providing and Fixing Precast Divider of Mix-20 Grade as per approved detailed design and drawing in position etc completed.

Providing and laying Cast in situ/ Ready Mix cement concrete in Mix-25 of trap/ granite/ quartzite/ gneiss metal for Reinforced Cement Concrete Pardi of required thickness including centering, formwork, cover blocks, laying/ pumping, compacting, curing, finishing and rougheningthem if special finish is to be provided and curing complete, (Excluding reinforcement and structural steel) with fully automatic micro processor based Programmable Logic Controller with Superwisery Control and Data Acquisitionenabled Reversible Drum Type mixer/ concrete Batch Mix plant (Pan mixer) etc. complete, with fine aggregate (Crushed sand V.S.I. Grade).

Providing and fixing in position Thermo Mechanically Treated (TMT) FE -500 bar reinforcement of various diameters for Reinforced Cement Concrete pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules, including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete.

Providing and laying Cast in situ/ Ready Mix cement concrete Mix-25 of trap/ granite/ quartzite/ gneiss metal for Reinforced Cement Concrete Slabs and Landings as per detailed designs and drawings including centering, formwork, cover blocks, laying/ pumping, compactionfinishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete, (Excluding reinforcement and structural steel) with fully automatic micro processor based Programmable Logic Controller with Superwisery Control and Data Acquisitionenabled Reversible Drum Type mixer/ concrete Batch Mix plant (Pan mixer) etc. complete, with fine aggregate (Crushed sand V.S.I. Grade).

Providing second class Burnt Brick masonry with conventional /Indian Standard type bricks in cement mortar 1:6 in foundations and plinth of inner walls /in plinth external walls including bailing out water manually, striking joints on unexposed faces, raking out joints on exposed faces and watering complete.

"L type Kerb: Providing & fixing Reinforced precast-L shape kerbstone Using 6 mm steel bars 4 number along the kerb length and 8mm steel bar 500 mm c/c vertical reinforcement , M-30 gradeconcrete with dimensions 350 mm high,150 mm thick with built inbase of 187 mm x 75 mm, including 2 numbers of 50 mm diasleeves for services at the top of the base & with top external edgewith rounding of 20 mm radius in highly superior quality surface &edge finish in 1 meter length & Painting as per direction ofEngineer - in - Charge. ( Including excavation for kerbing, lead liftand transportation of excavated material, P.C.C. below kerbing)"

Providing second class Burnt Brick masonry with conventional / Indian Standard type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding complete.

Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 milimetre thick in cement mortar 1:4 using waterproofing compound at 1 kg per cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 milimetre thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc. complete.

Providing internal cement plaster 12 milimetre thick in single coat in cement mortar 1:4 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete.

Providing internal cement plaster 6 milimetre thick in a single coat in cement mortar 1:4 without neeru finish to concrete surface in all positions including scaffolding and curing etc. complete.

Providing and fixing in position powder coated aluminium louvered windows ventilator of various sizes with powder coating as per detailed drawing and specifications including aluminium frames 80 x 38 milimetre x 1.22 milimetre box type, 5 milimetre thick sheet glass louvers, of approved quality complete.

Providing and laying telephone black/ Amba White/ Cadbury Brown/ Ruby red/ Ocean Brown granite stone of 18 to 20 Millimeter thick for door frame/ dado/ window boxing etc. on Cement Mortar 1:6 including filling joints with polymer base filler nosing the sharp edges wherever necessary, curing, etc. complete.

Providing and fixing fibre glass reinforced polyster door shutter 30 milimetre thick as per IS 14856 (2000) (reaffirmed 2006 ) without ventilator including chromium plated fixtures and fastening with chromium plated handles on both sides, complete.

Providing structural steel work of rectangular hollow steel section for steel trusses, other similar trussed items like purlin and members with all bracing, gusset plates etc. as per detailed designs and drawings or as directed including cutting, fabricating, hoisting, erecting, fixing in position making riveted/bolted/ welded connections and one coat of anticorrosive paint and over it two coats of oil painting of approved quality and shade complete.

Providing and fixing solid core flush door shutter in single leaf 32 milimetre thick decorative type of exterior grade as per detailed drawings approved face veneers 3 milimetre thick on both faces or as directed, all necessary beads, mouldings and lipping, wrought iron hold fasts, chromium plated fixtures and fastenings, with brass mortise lock, chromium plated handles on both sides, and finishing with French Polish etc. complete.

Providing and supplying with fixing the FRP dust bin of 42 lit. capacity. Outer cover of FRP Finish (600 Millimeter dia x 1325 Millimeter height to be fixed 1125 Millimeter height above footpath finish level having dumping opening of size (500 Millimeter (W) 1000 (H)) openable door on the war side of 600 width, consisting of removable internal bucket of TAP Finish (500andiax 1000 height) anchored internally on two side, as per drawings and designs, specifications etc. Complete as directed by Engineer-in-charge. including transportation, loading, unloading and including all other taxes and excluding GST.

Providing and laying ceramic tiles of RAK/ Kajaria/ Nitco/Asian or equivalent make having size 30 centimetre x 45 centimetre for dado and skirting in required position with readymade adhesive mortar of approved quality on plaster of 1:2 cement mortar including joint filling with white/ colour cement slurry cleaning curing etc. complete.

Providing and fixing Orissa type white glazed earthenware 575 milimetre water closet pan including 'S' trap with earthenware foot rests, cast iron soil and vent pipe upto outside face of the wall 1:2:4 brick bat lime concrete bedding without flushing tank and its accessories complete.

Providing and fixing European type white glazed earthenware coupled closet syphonic trap with syphonic low level white glazed 10 litres cistern with black backlite seat with all necessary pipe connection complete.

Providing and fixing wall hung white wash basin of size 350x450x165 milimetre with approved make pillar cock, C.P. Angular stop cock long thread approved make continental including SS bottle trap of approved make having necessary pipe connection up to the outside face of the wall etc complete as directed by Engineer in charge.

Providing and fixing High Density Polymer container Syntex or alike one piece moulded water tank made out of high density polythyler and built corrugated inclusive of delivery up to destination hoisting and fixing of accessories such as inlet, outlet overflow pipe inclusive of all tanks capacity between 200 to 1000 liters.

Providing waterproofing in Water Closet and bath including brick bat coba in all position including providing and laying 12 milimetre bedding in cement mortor 1:3 on vergin concrete slab with waterproofing compound at the rate of 1kg/ per bag of cement laying brick bat coba of required thickness in cm 1:5 with waterproofing compound 1 kilogram per bag of cement grouting and finishing the top layer with 20 milimetre thick brick bedding in cement mortor 1:3 with waterproofing compound 1 kilogram per bag of cement and testing the treated portion for 48 hours by pond test and covering ten years' guarantee on requisite stamp paper including curing etc. complete.

Providing cement based water proofing treatment to terraces (Indian water proofing or alike) with brick bats laid in required slope to drain the water for any span after cleaning the base surface. Applying a coat of cement slurry admixed with approved water proofing compound and laying the brick bats on bottom layer in cement mortar 1:5 admixed with approved water proofing compound filling up to half depth of brick bats, curing this layer for 3 days, applying cement slurry over this layer joints of brick bats with cement mortar1:3 admixed with approved water proofing compound and finally top finishing with average 20 milimetre thick layers of same mortar added with jute fiber at 1 kilogram per bag including finishing the surface smooth with cement slurry admixed with approved water proofing compound. Marking finished surface with false squares of 300 milimetre x 300 milimetre making the junctions at the parapet rounded and tapered top for required height, with drip mould at the junction of plaster and parapet and curing and covering 10 years Guarantee against leakproofness on Court fee stamp paper of Rs. 500/- including ponding test etc. complete.

Providing and laying in situ/ ready mix Mix-20 plain cement concrete of trap/ granite/ quartzite/ gneiss metal for cast in citu piers, abutment, returns, wings etc. including provision of "V" shaped false joints to form suitable panels on the faces to approve design with compacting by vibrating and curing complete, including plywood/ steel formwork centering, (excluding dewatering by means of pump) and including bailling out water and curing finishing in cement mortar 1:3 etc. complete, as directed by engineer in charge, for height upto 5 metre, with Concrete Mixer, with with fine agreegates of required specifications (VSI sand finely washed etc.) The basic rate shall be increased for height above 5.00 metre in following manners (A) Depth upto 10 metre percent extra for rate, (B) Depth upto 15 metre Add 40 percent extra for rate, C) Depth upto 20 metre Add 60 percent extra for rate, (D) Depth upto 20 metre Add 100 percent extra for rate.

Providing uncoursed rubble masonary of trap stones in cement mortar 1:6 in foundations and plinth of inner walls/in plinth of external walls including bailing out water manually, striking joints on exposed faces and watering complete.

Supply & Fixing precast cement concrete cylindrical Bollard of size (as per detaild drawing attatched) & 950 Millimeter height (650 Millimeter above finish level of 150 Millimeter Diameter manufactured by Mix-30 grade of concrete (with VSI quality standard Artificial Sand) by vibro compaction process using FRP moulds & painting with approved weather sheild paint of approved colour & texture, single & Double Groove cut inside of 10mm width and 75mm wide placed at 150 Millimeter from top finish (Reflective fluorescent tape should be sticked at 75 Millimeter grooved placed) as per detal drawing as directed by engineer in charge. including transportation, Loading, unloading and including all other taxes and excluding GST.

Providing coursed rubble masonry second sort of trap stones in cement mortar 1:6 in external walls of plinth including bailing out water manually, striking joints inside and racking out joints from outside and watering complete.

Providing and Laying factory made coloured chamfered edge Cement concrete grass paver blocks of required strength,thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50 milimetre thick compacted bed of fine fine aggregate (natural sand/crushed sand VSI grade finely washed etc.), compacting and proper embedding/laying of inter locking paver blocks into the fine aggregate (natural sand/crushed sand VSI grade finely washed etc.) bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine aggregate (natural sand/crushed sand VSI grade finely washed etc.) and cutting of paver blocks as per required size and pattern, finishing and sweeping extra fine aggregate (natural sand/crushed sand VSI grade finely washed etc.) and complete as per manufacturer spsecifications & direction of Engineer-in-Charge. 60 milimetre thick CC paver block of M-35 grade concrete with approved colour and design & pattern.

Providing and laying ceramic tiles having size 30 centimetre x 30 centimetre conforming I.S.15622/2006 (group D II-A) and 7 to 8 milimetre thick for flooring in required position laid on a bed of 1:4 cement mortar including cement float, filling joint with white/ colour cement slurry cleaning curing etc. complete.

Providing and fixing heavy duty inter locking concrete RUBBER MOULD GLOSSY PAVING BLOCKS of 60 millimeter thickness of having a strength of 400 kilogram per square centimetre of approved quality and shape on a bed of crushed sand of 25 to 30 millimeter thick including striking joints and cleaning etc. complete using 100 percent crushed sand.

Providing and constructing Brick Masonry Inspection Chamber 60 centimetre x 45 centimetre x 90 centimetre including 1:4:8 cement concrete foundation 1:2:4 cement concrete channels half round Glazed Stone Ware pipes, Brick Masonry, plastering from inside and with frame fixed in cement concrete with Reinforced Cement Concrete cover medium duty 140 kilogram with frame etc. complete.

Providing and constructing Brick Masonry Inspection Chamber 90 centimetre x 45 centimetre x 90 centimetre including 1:4:8 cement concrete foundation 1:2:4 cement concrete channels half round Glazed Stone Ware pipes, Brick Masonry, plastering from inside and with frame fixed in cement concrete with Reinforced Cement Concrete cover medium duty 140 kilogram with frame etc. complete.

Providing and laying Cast in situ/ Ready Mix cement concrete in Mix-20 of trap / quartzite /granite /gneiss metal for Reinforced Cement Concrete Waist Slab, and steps of staircases as per detailed design and drawings or as directed including steel centering, plywood/ steel formwork, steel props, laying/ pumping, compaction, finishing uneven and honeycombed surface with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening the surface if special finish is to be provided and curing etc. complete, with fully automatic micro processor based Programmable Logic Controller with Superwisery Control and Data Acquisitionenabled Reversible Drum Type mixer/ concrete Batch Mix plant (Pan mixer) etc. complete, with fine aggregate (Crushed sand V.S.I. Grade). (Excluding einforcement, including cover block).(Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin ).

Filling in plinth and floors with contractors material/ brought from outside and approved by Engineer incharge in layers of 15 centimetre to 20 centimetre including watering and compaction etc. complete.Spec. No. : Bd.A. 11/Page No. 263

Providing and laying cement concrete pipe of Indian Standard 458:2003 non pressure-3 class of 1200 milimetre diameter in proper line, level and slope including providing and fixing collars in cement mortar 1:2 complete.

Supplying and fixing Cobbels stone of size 100 Millimeter x100 Millimeter x65 Millimeter thick of black color with natural finish and four side machine cut Granite cobells of different colours & fixing in 1:6 cement mortar on an average 55 Millimeter thick cement bed. Gaps in two stones to be filled by 1:3 cement morter & filler of colour cement with sunk pointing and machine cut straight line looks square shape as per detail drawing & specifications & as per the directed by engineer-in-charge including transportation. Loading, unloading and all other taxes and excluding GST.

Providing and fixing on walls / ceiling / floor 15 milimetre diameter Chlorinated Poly Venyl Chloride pipe with necessary fittings, remaking good the demolished portion. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed complete.

Providing and fixing on walls / ceiling / floor 20 milimetre diameter Chlorinated Poly Venyl Chloride pipe with necessary fittings, remaking good the demolished portion. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed complete.

Providing and fixing on walls / ceiling / floor 40 milimetre diameter Chlorinated Poly Venyl Chloride pipe with necessary fittings, remaking good the demolished portion. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed complete.

Providing and fixing Crome Plated BIB cock with wall flange of approved make including necessary sockets/union nut etc. complete.

Providing and fixing 15 centimetre x 10 centimetre salt glazed stoneware gully trap in cement concrete 1:4:8 out side the building including cast iron grating in the sink, connecting glazed stonewre pipe brick masonry chamber with cast iron lid and cast iron grating for the gully trap.

Providing and fixing 8 centimetre rigid Poly Venyl Chloride Nahani trap including Poly Venyl Chloride grating, bend, connecting piece of Unplasticised Poly Venyl Chloride pipe up to the outside face of wall ,making the good damaged surface and testing complete ( Prior approval of sample and brand by Ex. Engr. is necessary before use).

Providing and fixing 450 milimetre x 550 milimetre size superior type Belgium mirror with 16 milimetre diameter nickel plated towel rod complete.

Providing and fixing White Glazed Earthenware full stall type Urinal with Poly Venyl Chloride flushing cistern of 5 litre capacity with fittings, inlet pipes and stop tap, brackets for fixing the cistern, 32 milimetre diameter Poly Venyl Chloride flush pipe with fittings and flushing arrangement including lead soil pipe, lead trap and soil pipe connection up to the outside face of the wall.

Providing and fixing mild steel grill work for windows, ventilators, 15 kilogram per square metre as per drawing including fixtures, necessary welding and painting with one coat of anticorrosive paint and two coats of oil painting complete.

Providing & fixing Precast-Concrete Grating for Tree Girth of 30 Cm to 60 Cm Section of Size maximum 1500 x 1500 x75 mm thick machine moulded steam cured cement concrete perforated slab for tree guard layer over crushed gravel and crush stone in FRP having circular opening as per requirement on site as per detailed drawing & specification, and as directed by Engineer in Charge As directed by Engineer In charge

Providing and laying concrete pipe of Indian Standard Non Pressure class of 300 milimetre diameter in proper line, level and slope including necessary collars, excavation, laying, fixing with collars in cement mortar 1:1 and refilling the trench complete.

Providing and applying two coats of exterior white weather shield paint of approved manufacture and of approved colour to the plastered surfaces including cleaning, prepairing the plaster surface, applying primer coat, scaffolding if necessary and watering the surface for two days complete.

Providing and applying, plastic emulsion paint of approved quality, colour and shade to old and new surface in three coats including scaffolding, preparing the surface.(excluding primer coat). complete.

Providing and laying a Paving Fabric CE Marked Needle Punched and Mechanically Bonded Non-Woven Geotextile of Techfab India, TFI TechPave-C040 indigenously manufactured from high quality polypropylene staple fibres (continuous filament will not be accepted) with heat treatment on one side to form a strong, flexible and dimentionaly stable fabric structure, with optimum bitumen retention capacity to asphalt overlay over flexible pavement and distresses regid pcc pavement for moisture barrier, avoid refelective cracking and stress relieving membrane with necessary overlaps as per drawing, etc. complete. (Specification: MORTH section-700). with prior approval of concerned Superitending Engineer.

Providing & fixing CE Marked Metal Gabions For 1metre height indigenously manufactured as per required section including boxes made of mechanically woven hexagonal shaped wire mesh of type, (8 x 10) cm, edges mechanically selvedged made of heavily (Zinc+PVC) coated G.I. wires as per BS:443, mesh wire 2.70/3.70 mm Ø (ID /OD), edge wire 3.40/4.40 mm Ø (ID/OD) of Techfab India type and filled with 20 to 50 Kg weight trap stones including conveying with all leads and lifts and placing at required places in required line, level, slope, section as directed, etc. and tied by 5% lacing wire 2.20/3.20 mm Ø (ID/ OD) as directed by Engineer-in-charge. For retaining walls, toe walls, etc. for slope protection and erosion control application of river bank & sea-shore etc. complete (Specification: MORTH section-2500. (Excluding Rubble) with prior approval of concerned Superitending Engineer.

Supplying and laying trap stones upto 20 kilogram for Filter / Core layer including conveying with all the leads, lifts, laying in required lines, level, slope as per drawing including necessary equipments and machinery as directed by etc. complete in tidal conditions.

Providing and Fixing Processed Stone Cladding on wall surface/ plywood surface. RCC pardi/ Wall and all type of Interior, Exterior Compound wall and Gate etc. of cladding processed stone with material of Processed clay, Wooden chips, Silica sand, Cement, GFRC admixtures, Colour pigments, Fiber up to thick of 230 mm/ 25 mm including scaffolding, fixing of screw, etc. (As directed by Engineer in Charge)

Providing earth work in embankment with approved materials obtained from other sources upto lead of 50 metre including all lifts, laying in layers of 20 centimetre to 30 centimetre thickness breaking clods, dressing to the required lines, curves, grades and section, watering and compaction with vibratory roller with V-Sat attachment to achieve not less than 97% of standard proctor density etc. complete (Material obtained from Other sources).

Providing and laying polished Kotah stone flooring 25 millimeter to 30 millimeter thick and of reqd. width in plain/ diamond pattern on a bed of 1:6 cement mortar including cement float,filling joints with neat cement slurry,curing,polishing and cleaning complete.

Newasa Basalt stone for wall 15 cm thick : Providing and fixing Newasa Basalt stone for wall 15 cm thick( Two line dressed stone of size 0.45x0.30x0.125 to 0.15 and not less than 0.30x0.30x0.15 Mtr, cut in shape and two adjacent sides to be dressed, from Newasa, Dist Ahmednagar ) in 1:1 Cement mortar in super structure including striking joints and watering complete to the entire satisfaction of the architect (Ashlar Masonary in tichiv style )

Providing and fixing 450 milimetre x 550 milimetre size superior type Belgium mirror with 16 milimetre diameter nickel plated towel rod complete.

Providing and laying Weep Holes of 100 milimetre diameter Asbestos Cement / PolyVenylChloride pipes as per drawing for abutment returns, return walls etc. complete.

Providing and casting in situ or precast tapering Reinforced Cement Concrete Mix-20 Barrier type Kerb without gutter (as per IRC:86-1983) embedded 125 milimetre below ground level over Mix-10 Plain Cement Concrete finished neatly with Cement Mortar 1:2, setting the same in Cement Mortar 1:2, including the required excavation in any strata and removing the excavated stuff anywhere in city and redoing the surface as specified and directed by Engineering In-charge. Using Concrete Batching and Mixing Plant.

Providing and errecting chain link fencing 1.6 metre height with galvanised iron chain link of size 50 x 50 milimetre 8 guage thick and fixed 75 milimetre above Ground level on vertical Mild Steel Angle of 40x40x6 milimetre size including excavating pits for foundation and embeded in cement concrete block of 1:4:8 mix of size 450x450x670 milimetre at 1.75 metre center to center with iron bar 16 milimetre diameter as hold fast including welding link with angle frame at 30 cm. c/c nuts and bolts and horizontal Mild Steel Angles at top and bottom of 25x25x5 metre size and vertical Mild Steel flat 35 x 5 metre and 25 x 5 metre horizontal including cross support of 40x40x6 metre Angles both sides at every corner or bends embeded in concrete blocks of 1:4:8 of size 450x450x670 milimetre including 3 coats of oil painting etc. complete.

Providing and constructing granite kitchen platform with fixing of stainless steel sink 600 milimetre x 450 milimetre size as per detailed drawing including vertical both side polished kadappah stone 25 to 30 milimetre thick supports with kadappah top 35 to 40 milimetre thick and polished granite 16 to 20 milimetre top with side strips of granite at front and both sides of platform raised with two vertical granite supports 15 centimetre height and top granite of 75 x 40 centimetre including cutting, opening for sink of required size in kadappah as well as granite etc. complete.

Providing and fixing Manglore tiled roofing with class "AA" tiles including securing the last course of tiles near the eaves with steel flat 40 milimetre x 3 milimetre and 1.22 milimetre wire fixing country teak wood sloping battens of 25 x 12 milimetre teak wood horizontal battens of 50milimetre x 25 milimetre over the sloping battens, all iron work and coal tarring the battens complete (excluding ridge and hip tiles)

Providing and fixing Manglore tile ridge and hip tiles of class "AA" including scaffolding if necessary, pointing with coloured cement mortar and curing complete.

Providing and fixing 6.00 milimetre thick Indian Standard Institute mark Asbestos Cement Corrugated sheet roofing including galvanised iron 'J ' or 'L' hook bolts galvanised iron and bituminous G.I.washers, galvanised iron clamps, bolts and nuts and scaffolding complete.

Providing and fixing 6milimetre thick Indian Standard Institute mark Asbestos cement ridge capping for roofing including galvanised iron hooks, bolts, galvanised iron and bituminous washers, galvanised iron clamps, bolts and nuts including scaffolding, complete.

Suppling Second Class Red Brick For Brick Paving as Directed by engineer incharge

Providing and laying Antiskid Ceramic tiles of approved quality of size 30 centimetre x 30 centimetre and conforming to Indian Standard 15622-2006 (Group-B IIA) for antiskid flooring in required position laid on a bed of 1:4 cement mortar including cement float, filling joint with cement slurry cleaning curing etc. complete.

Providing and fixing 75 milimetre diameter stabiliser pipe /Poly Venyl Chloride soil vent /waste pipe and with necessary fixtuers and fiting such as bends, tees, single junctions slotted vent, clamps complete.

Providing and fixing 100 milimetre diameter stabiliser pipe /Poly Venyl Chloride soil vent /waste pipe and with necessary fixtuers and fiting such as bends, tees, single junctions slotted vent, clamps complete.

Removing lime or lean cement concrete including stacking the spoils as directed with all leads, lifts complete.

Dismantling the R.C.C. work 1:2:4 and sorting out the materials such as steel etc. as directed and stacking them within the specified lead as directed.

Providing and laying vitrified mirror/ glossy finish tiles for Flooring of decorative type having size 590 milimetre to 605 milimetre x 590 milimetre to 605 milimetre of 8 to 10 milimetre thickness and confirming to Indian Standard 15622: 2006 (group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and clearing etc. complete.

Providing and fixing in position, Double shuttered aluminium extruded powder coated openable door of overall size 1.50 metre x 2.40 metre or as specified with aluminium door frame of powder coated section 101.60 x 44.75 milimetre, 3.18 milimetre thick and shutter compr Indian Standard Institute ng of powder coated section having bottom and lock rail of size 150 milimetre x 44.5 milimetre, 2.90 milimetre thick top rails 47.62 x 44.45 milimetre, 3.18 milimetre thick, vertical style 47.62 x 44.45 milimetre, 3.00 milimetre thick and for shutter plain glass panes 5 milimetre thick for top panels and 12 milimetre thick both side laminated phenol bonded particle board panels for bottom panels, Indian Standard I. mark, heavy duty, Hydraulic floor spring of 150 kilogram capacity, having heavy duty concealed lock, necessary beeding, glazing clips, Poly Venyl Chloride gaskets, 250 milimetre length tower bolts, 150milimetre diameter m. pad handle, as per detailed design and drawing or as directed by engineer in charge including all materials, labours and equipments.

Providing and fixing 22 B.W.G. plain FRP sheets on top of weather shed, including scaffolding, fixing by means of nut and bolts or as directed etc. complete. (Brackets of 70 x 45 milimetre to be paid separately).

Providing and laying vitrified mirror / glossy finish tiles for Skirting having size 590 milimetre to 605 milimetre x 590 milimetre to 605 milimetre of 8 to 10 milimetre thickness and confirming to IS. 15622-2006 (group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and clearing etc. complete.

Providing nad fixing in position steel fibre reinforced concrete (S.F.R.C) frame and cover (Plain or strom water drain) heavy duty of approvrd make including loading, unloading, and transporation,all taxes, production year, and PWD symbol on top etc, complete as direted by Engineer In Charge (40 Tones Capasity) Size 900mmx900mm

Providing 25 millimeter to 30 millimeter thick partition of both side polished black Kadappa stone slab of approved quality including giving required size and shape fixing in cement mortar 1:3 curing and cement complete.

Providing and fixing rolling shutter fabricated from steel laths of minimum thickness 0.9 milimetre with lock plate of 3.15 milimetre thickness reinforced with 35 x 35 x 5 milimetre angle section fitted with sliding bolts and handles for both sides, deep Mild Steel channel section of depth and thickness not less than 65 milimetre and 3.15 milimetre respectively with hold fast arrangments, Mild Steel Bracket plate 300 x 300 x 3.15 milimetre minimum size and shape with square bar suspension shaft of minimum 32 milimetre diameter, hood cover of Mild Steel sheet not less than 0.9 milimetre thickness and of any size at top and safety devices including mechanical gear operation arrangementconsisting of worm gear whwwls and worms of high grade cast iron or mild steel and one coat of red lead primer complete. (I. S. 6248 - 1979) with mechanical gear.

Providing and applying a base coat comprising of 1 kilogram Polydee-MC and 1 kilogram fresh cement after wetting the surface followed by drying the surface for 2 days, apply primer coat of TP-40 and after drying, applying Polydee-11 two component (mixing ratio 2 A: 1 B) Antibactorial food grade coating inside drinking watertank in two coats with time interval of minimum 8 hours covering 7 years guarantee on Court Fee Stamp Paper of Rs.100/- etc complete.

Ferro Cement Sculpture: Providing Design, artwork, fabrication & erecting of Ferro Cement Sculpture of size around & up to 3.90 X 3.0m X 0.9m variation in size up to ±5% on Skeletal Framing in M.S rods (6-8mm dia.), with weld mesh (1"x2") on both sides & galvanized Chicken mesh fixed over it on both sides, plastering done in three layers (8mm, 25mm & 5mm) with curing of each layer. The plastering mortar mixed with waterproofing agents (101LW- Dr.Fixit) & polypropylene fiber (Aligitech) Curing done for 2 weeks after final plastering. The water: cement: sand (W: C: S) ratio for ferrocement 0.40: 1: 1.5 by weight. Sand Sieved fine sand and cement are first evenly mixed; the required quantity of water added afterwards. The ratio of cement: sand is 1:2 to 1:3 by volume, and water: cement ratio is 1:3, 0.45 by weight & finishing the sculpture with two coats of exterior acrylic emulsion paint including applying primer coat, including primary structure to provide one piece look including molding & cornices at junction of base structure as per Approved drawing including necessary MS fabrication works to support ferrocement structure, necessary scaffolding at all level & staging etc. complete including cost of necessary machineries for installation, all necessary accessories, adhesives, hardware, cost of material, labour, Transportation, scaffolding, loading, unloading, akk type of taxes, all lead & lifts, & maintenance up to one year from the certified date of completion etc. excluding GST Complete, as per approved design & detail drawings and as directed by engineer.

Providing and laying in place 300mm x 300mm x 16mm cement tactile directional and warning tiles (for a person with visual impairment)of the approved brand and make and specified colour for outdoor floors such as footpath, courtyard, multimodals location etc. laid on 20mm thick base of cement mortar 1:4 (1 cement: 4 coarse sand) in all shapes and patterns including grouting the joints with white cement with matching pigments etc. complete as per direction of engineer in charge

Providing Round Reinforcement Concrete cement Cylinderical Sheter out (650X295X395) Kerb stone (Mudas)

GARDEN SOIL :- Supplying on site garden soil well seived 90% to pass through I.S. sieve of 10mm size free from stones rubbish like dried grass roots & other such materials. The soil should be fresh from quarry. The colour of the soil generally be red. The soil will be measured by measuring box. (Farma) Items includes royalty charges, Transporting, loading-unloading etc. (Lead charges per 30 Kilometer. considered.)

FARM YARD MANURE :- Supplying on site well decayed, well dried, well powdered, without clods & free from stones, dried grass & other rubbish material. The colour of the manure generally be black. The manure will be measured by measuring box. (Farma) Item includes Transporting, loading-unloading etc. (Lead charges per 30 Kilometer are considered.)

Preparing instant Lawn :- Excavating the ground to a required depth of 20 Centimeter removing & conveying unwanted stuff to a required distance as direced . Filling fresh garden soil/ silt & manure in excavated area in 3:1 proportion to a height of 20 Centimeter. Mixing garden soil and manure thoroughly well, levelling, with required slope ,light watering, on previous night,rolling on surface,fixing readymadelawn truf,rolls,or slabs of required variety as directed. Ramming on it for proper fixing & maintaing till well establish by watering, weeding, rolling etc.complete.

Preparing Edging Or Border :- Excavating Ground to a required depth of 20 Centimeter,in the required area, removing and conveying umwanted stuff,rubbish to the required distance as directed.Filling the excavated part with fresh soil and manure in 3:1 proportion to a required height to 20cms. Mixing,levelling,watering the same planting rooted .edging /border plants at distance of 20 cms.apart watering,weeding,stirring of soil ,replacing casualties.pruning if necessary etc. Complete

Planting clipped Hedge:- Excavating the ground to a required depth of 30 Centimeter. removing & conveying unwanted stuff to a required distance as directed. Filling fresh garden soil & manure in excavated area in 3:1 proportion to a height of 30 Centimeter. Mixing garden soil & manure topography well, levelling, watering, previous night. Planting hedge plant of required species in two rows. Distance between two rows & between two cutting will be 25 Centimeter. Maintaining till well established by watering, weeding, stirring the soil & clipping if necessary etc. complete

Prepairing flower Bed:- Excavating the ground to the required depth of 30 Centimeter. Removing & conveying unwanted stuff to a required distance as directed. Filling fresh garden soil & manure in excavated area in 3:1 proportion to a required height of 30 Centimeter. Mixing garden soil & manure topography well, levelling, watering, previous night. Planting seedings of required annuals 25cms. Apart maintaining till well established by watering, weeding, stirring replacing of casualties etc. Complete

Preparing Canna Bed:- Excavating the ground to the required depth of 30 Centimeter. Removing rubbish & conveying unwanted stuff to a required distance as directed. Filling fresh garden soil & manure in excavated area in 3:1 proportion to a required height of 30 cms. Mixing garden soil & manure topography well, levelling, watering, previous night. Planting well developed Canna rhyzomes 40 Centimeter. apart. Maintaining till well established by watering, weeding, stirring, replacing, casualties etc. complete.

Preparing Shrubbery:- Excavating the ground to the required depth of 30 Centimeter. Removing & conveying unwanted stuff to a required distance as directed. Filling fresh garden soil & manure in excavated area in 3:1 proportion to a required height of 30 Centimeter. Mixing garden soil & manure topography well, levelling, watering, previous night. Planting well developed shrubs plant 0.5 meter. apart as directed & maintaining till well established by watering, weeding, stirring replacing of casualties etc. Complete.

Rose Plant:- Excavting pit with size 0.3 x 0.3 x 0.3 meter. Removing & conveying unwanted stuff to a required distance as directed. Filling the pit with fresh garden soil & manure in 3:1 proportion to a height of 0.3 meter. Mixing the soil & manure topography well, levelling, watering, on previous night. Planting 40 to 50 Centimeter. height healthy plant of required rose variety. Maintaining till well established by watering, weeding, stirring,prunning, replacing the casualties etc. complete.

Mogra Plant /Creepers /Climbers:- Excavating pit with size 0.3 meter x 0.3 meter x 0.3 meter, removing & conveying unwanted stuff to a required distance as directed. Filling the pit with approved excavated material upto a height of 0.15 meter. & remaining height of 0.15 meter. with fresh garden soil & manure in 3:1 proportion. Mixing soil & manure throughly well levelling, watering, on previous night. Planting one or two year old healthy plant as per specifications. Maintaining till well established by watering, weeding, prunning, stirring, replacing casualties etc. complete

Planting large flowering /Shady trees:- (Min. Height 1m.)Digging pit with size 0.9 meter x 0.9 meter x 0.9 meter. Removing & conveying unwanted stuff to a required distance as directed Filing the pit with approved excavated material upto a height of 0.3 meter. & Remaining height of 0.6 meter. with fresh garden soil & manure in 3:1 proportion. Mixing soil & manure throughly well levelling, as directed watering previous night, planting one to two year old minimum 1 mtr. height healthy trees sapling as per specifications. maintaining till well established by watering, weeding, stirring, replacing casualties, etc complete

Planting Large Flowering/shedy trees:- (Min. Height 2 meter.) Digging pit with size 0.9 meter x 0.9 meter x 0.9 meter removing and conveying unwanted stuff to a required distance as directed .Filling the pit with approved excavated material upto a height of 0.30 meter and remaining height of 0.60 meter.with fresh garden soil &manure in 3:1 proportion.Mixing soil & manure thoroughly well ,leveling as in 3:1 proportion .Mixing soil and manure thoroughly well,leveling as directed, watering on previous night.Planting two to three year old minimum 2.0 meter height ,healthy trees saplings as per specification. Maintaining till well established by watering,weeding,stirring of soil replacing casualties,etc. Complete.

Planting small and medium size ornamental /flowering plant:- Digging pit with size 0.6 meter x 0.6 meter x 0.6 meter removing and conveying unwanted stuff to a required distance as directed .Filling the pit with fresh garden soil & Farm Yard Manure up to a height of 0.60 meter. in 3:1 proportion .Mixing soil and manure thoroughly well,leveling and watering on previous night.Planting one to two year old healthy plant saplings as per specification. Maintaining till well established by watering,stirring of soil and manure,replacing casualties,etc. Complete.

Preparing Ground Covers:-Excavating the ground to a required depth of 20 Centimeter. Removing & conveying unwanted stuff ,rubbish to the required distance as directed. Filling the excavated area with fresh garden soil & FY Manure in 3:1 proportion to a height of 20 Centimeter.Mixing ,levelling and watering the same previouse night.Planting sutable ground covers as directed in staggering Pattern ,distance between two rows 25 Centimeter,watering & maintaining till well established.

Sapling of small and Medium Ornamental flowering plants, Thuja ,Cupresus, Ornamental ficus, Mussanda etc Meter.

Providing Fixing, Testing and Commissioning of Irrigation HDPE Pipes with including all Accessories , all Material, labour, etc all HDPE Pipe 6Kilogram/ Centimeter2 dia-90 Millimeter Make - Finolex, Supreme, Jain or equivalent.

Providing, Fixing, Testing & Commissioning Tubing with drippers and accessories including all labours, if any. 16 Millimeter In-Line Drip Tubing of class-2 with in-built 4 LPH Pressure Compensating (PC) emitters spaced @ 0.6 mtr. Make-Jain /Netafim/Finolex/Rain Bird

Providing, Fixing. Testing & Commissioning of Sprinkler with including all Accessories, all material, Pop-up labour, etc all Spray Pop-up sprinkler 6" height with Replacable.nozzle of radius 3 to 5 meter @ 2.1 bar, Q-0.12 to 0.30 lps (for full circle)with SAM Make-Hunter/Toro /Nelson / Rain Bird

Other Irrigation Items Swing Joint 4 Ways 30 cm x 3/4" (HDPE) Make Hunter /Toro/Nelson/Rain Bird

Providing Fixing, Testing & Commissioning Tubing with drippers and accessories including all labours, if any. 16 mm plain drip Tubing of class -2 Make-Jain /Netafim /Finolex/Rain Bird

Providing, Fixing, Testing & Commissioning Tubing with drippers and accessories including all labours, if any. 8 Lph PC dripper Make-Jain /Netafim / Finolex / Rain Bird

Providing, Fixing, Testing & Commissioning Tubing with drippers and accessories including all labours, if any. Take off 2 way 16 Millimeter x 3/4" Make-Hunter /Toro /Nelson/ Rain Bird

Providing, Fixing, Testing & Commissioning Valve Box with openable top cover with all necessary fittings, adhessives etc. complete including all labours, if any. Turbo Line Joiner 16 Millimeter Make-Hunter /Toro /Nelson/ Rain Bird

Providing, Fixing. Testing & Commissioning Valve Box with openable top cover with all necessary fittings, adhessives etc. complete including all labours, if any. Elbow 16 Millimeter Make-Jain/Netafim / Finolex

Providing, Fixing. Testing & Commissioning Valve Box with openable top cover with all necessary fittings, adhessives etc. complete including all labours, if any. Tee 16 Millimeter Make-Jain/Netafim / Finolex

Providing, Fixing, Testing & Commissioning Valve Box with openable top cover with all necessary fittings, adhessives etc. complete including all labours, if any. Lateral Endstop (8 Shape) 16 Millimeter Make-Jain/Netafim/Finolex

Providing, Fixing. Testing & Commissioning Valve Box with openable top cover with all necessary fittings, adhessives etc. complete including Valve Boxes 10" Inch , Round shape with openable top green Cover Make-Jain Toro /Nelson/ Rain Birdding all labours, if any.

Providing, Fixing, Testing & Commissioning Valve Box with openable top cover with all necessary fittings, adbessives etc. complete including all labours, if any. PVC Service saddle 40 Millimeter x 1/2", 10 Kilogram/cemtimeter2 Make-Jain/Finolex / Kisan

Providing, Fixing, Testing & Commissioning Valve Box with openable top cover with all necessary fittings, adhessives etc. complete including all labours, if any. PVC flush valve 50 mm Make-Jain / Plasson / Kisan

Providing, Fixing, Testing & Commissioning of Filtration Unit consisting of Sand, Screen Filter for a filtering capacity of designed flow with Manual Back flush Unit conforming to Indian Standard specifications complete with all fittings, including all labours, if any Make - Jain Amiad/Kisan/Metafim Media Filter 2.5" Horizontal Is 14606 BSP Flanged 100 mic Maximum Operating Pressure 10 kgf.SILI

Providing, Fixing, Testing & Commissioning of Filtration Unit consisting of Sand, Screen Filter for a filtering capacity of designed flow with Manual Back flush Unit conforming to IS specifications complete with all fittings, including all labours, if any Make - Jain Amiad/Kisan/ Metafim Screen Filter Y Type 2.5" metal-40cumh IS:12786

M/s Nikhil Constructiongroup Private Limited

Abhijeet Infrastructure