INTERIOR WORKS FOR INDUSTRY CONNECT AND OUTREACH FACILITY AND BOARD ROOM IN MAIN BUILDING AT IISER PUNE.

ALL RATES IN THIS BOQ ARE EXCLUDING GST, GST SHALL BE PAID EXTRA AS PER PREVELLING RATES. BIDDER SHALL QUOTE ACCORDINGLY.

Removing of existing calcium silicate/grid ceiling by removing side boards, grid tiles, grid work and internal GI/aluminium frame work and stacking usable material with campus and disposal of non usable material to scrap yard/dumping yard with in IISER Pune campus or at location approved by Engineer In-charge within campus. Actual one side area of wall dismantled shall be measured for payments.

Removing of existing calcium silicate partition by cutting in size/making opening as directed by by the Engineer In-charge up to 100mm thickness by removing both side boards, removing internal GI/aluminium frame work and stacking usable material with campus and disposal of non usable material to scrap yard/dumping yard with in IISER Pune campus or at location approved by Engineer In-charge within campus. Actual one side area of wall dismantled shall be measured for payments.

Providing, supplying and fixing premium quality decorative wall paper of approved make, design, colour, shade and texture on prepared wall surfaces, complete as per approved sample and direction of the Engineer-in-Charge. The work shall include cleaning the existing wall surface, removal of loose paint, dust, grease, levelling by putty, crack filling and other foreign materials, light scraping wherever required, and preparing the surface by making it smooth, even and suitable for proper adhesion of wallpaper. One coat of primer shall be applied before application of wall paper. The work shall also include minor surface corrections, filling of small undulations, sanding and proper surface preparation required for wallpaper application. The wallpaper shall be applied using recommended adhesive as per manufacturer’s specifications, ensuring proper alignment, matching of patterns, and fixing the wallpaper truly in line, level and without wrinkles, air bubbles, overlaps or visible joints. The contractor shall bring sufficient wallpaper catalogues/samples for selection and approval by the Engineer-in-Charge prior to commencement of the work. The wallpaper shall be cut, positioned and fixed carefully to achieve uniform appearance and proper pattern continuity. The work shall include all labour, materials, adhesives, tools, scaffolding, transportation, wastage, finishing, trimming at edges, corners, openings, wastage and making good after completion, complete in all respects as directed by the Engineer-in-Charge. Measurement shall be taken for the actual finished surface area of wallpaper applied on the wall.

Providing and applying decorative Glass film/printed glass film as per approved design. Quoted rate shall be including cost of cleaning of glass , making wall dust free for application of glass film and applying film as per line and level etc complete. Glass film catalogues shall be brought for approval of wall paper before starting of work.

Providing and laying of Luxury Vinyl Wooden finish planks Flooring of tiles size 100mm X 900mm tiles with accessories-having a nominal total thickness of minimum 2.0mm. Tiles. Quoted rate to include providing and laying protection of LDPE sheet with taped edges until handover and completion of all other activities as the floor as per the instructions of Engineer in charge. Flooring to be laid by using suitable Pidilite Fevicol Floor fix adhesive. Application shall be uniformly on floor and tiles to ensure one level, gap free fixing of tiles. Quoted rate shall be including removal of existing carpet, shifting of malba to scrap yard, cleaning of floor and preparation of surface for installation of new carpet. Actual area of flooring laid at site shall be measured for payments. Rate shall be including all taxes, excluding ( GST Extra ), duties, wastage, capping accessories, material testing samples and testing expenses etc. complete. Nothing extra paid separately. 5% variation in tile size is allowed. Engineer In-charge may select any make/design from approved make based on scheme of finishes. Approved make Armstrong/Responsive/Wonder floor.

GRID CEILING WORK: Providing and Fixing 15 mm thick eco friendly light weight false ceiling tiles of approved texture of size 595 x 595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanised steel sections (galvanising @ 120 grams per sqm including both side) consisting of main ‘T’ runner suitably spaced at joints to get required length and of size 24x38 mm made from 0.33 mm thick (minimum) sheet, spaced 1200 mm centre to centre, and cross “T” of size 24x28 mm made out of 0.33 mm (Minimum) sheet, 1200 mm long spaced between main’T’ at 600 mm centre to centre to form a grid of 1200x600 mm and secondary cross ‘T’ of length 600 mm and size 24 x28 mm made of 0.33 mm thick (Minimum) sheet to be inter locked at middle of the 1200x 600 mm panel to from grid of size 600x600 mm, resting on periphery walls /partitions on a Perimeter wall angle pre-coated steel of size(24x24X3000 mm made of 0.40 mm thick (minimum) sheet with the help of rawl plugs at 450 mm centre to centre with 25 mm long dry wall screws @ 230 mm interval and laying 15 mm thick densified edges calcium silicate ceiling tiles of approved texture in the grid, including, cutting/ making opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc., wherever required. Main ‘T’ runners to be suspended from ceiling using G.I. slotted cleats of size 25x35x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm G.I. adjustable rods with galvanised steel level clips of size 85 x 30 x 0.8 mm, spaced at 1200 mm centre to centre along main ‘T’, bottom exposed with 24 mm of all Tsections shall be pre-painted with polyester baked paint, for all heights, as per specifications, drawings and as directed by Engineer-in-Charge. NRC shall be minimum 0.5.

Providing & fixing false ceiling at all height including providing & fixing of framework made of special section, power pressed from M.S. sheets and galvanised with zinc coating of 120 gms/ sqm (both side inclusive) as per IS : 277 and consisting of angle cleat of size 25mm wide x 1.6mm thick with flanges of 27mm and 37mm, at 1200mm c/c, one flange fixed to the ceiling with dash fastener 12.5mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25 x10 x0.50mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I channels 45 x15 x 0.90mm running at the spacing of 1200 mm c/c, to which the ceiling section 0.5mm thick bottom wedge of 80mm with tapered flanges of 26 mm each having lips of 10.5mm, at 450mm c/c, shall be fixed in a direction perpendicular to G.I intermediate channel with connecting clip made out of 2.64mm dia x 230mm long G.I wire at every junction, including fixing perimeter channels 0.50mm thick 27mm high having flanges of 20mm and 30mm long, the perimeter of ceiling fixed to wall/ partitions with the help of Rawl plugs at 450mm centre, with 25mm long dry wall screws @ 230mm interval, including fixing of Calcium Silicate Board to ceiling section and perimeter channels with the help of dry wall screws of size 3.5 x25mm at 230mm c/c, including jointing & finishing to a flush finish of tapered and square edges of the board with recommended jointing compounds, jointing tapes, finishing with jointing compounds in three layers covering up to 150mm on both sides of joints and two coats of primer suitable for boards, all as per manufacture's specification and also including the cost of making opening for light fittings, grills, diffusers, cut outs made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in charge but excluding the cost of painting with: 10mm thick Calcium Silicate Board made with Calcareous & Siliceous materials reinforced with cellulose fiber manufactured through autoclaving process.

Deployment of Tempo ( 407 )/tractor trolley and adequate Manpower for Shifting of debris , unserviceable material to IISER Scrap yard or dumping yard as per site requirement. Material to be collected from corridors of Main Building ( G+2 ) as per directions of Engineer In-charge , unserviceable material to be shifted to scrap yard. Quoted rate shall be including the hire charges, labours, transport, fuel , tools tackles, operators charges etc , insurance of equipment and operator, etc. complete. Copy of valid license shall be available with the driver along with the Registration Certificate ( RC ) copy and shall be submitted to IISER Pune for records. Nothing extra shall be paid separately. Actual number of trips as per Log Sheet duly approved by Engineer In-charge or his representative shall be measured for payments. Agency shall maintain log-sheet of deployment and get daily certified from department on same day and shall be submitted along with running account bill for payments. Quoted rate shall be including cost of labour , tools , ( GST Extra ) ,taxes , minimum labour wages , etc complete. Nothing extra shall be payable separately. Minimum volume to be shifted shall be 1 brass unit.

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, panelling and dash fasteners to be paid for separately) : For fixed portion , Powder coated