86208 SPECIAL REPAIR TO ROAD ALONG THE OSR AREA AND CHURCH LINE QTRS INCLUDING FOOTPATH AND OTHER ALLIED WORKS AT AFMC UNDER GE (CENTRAL) PUNE

Amount

Repairs to pot holes any depth not exc 1 Sqm each including sweeping free from dust and mud, or water scoring sunken surfaces in roads, paths, etc. cutting around edges to at least 25 mm in depth, making good by applying tack coat with bituminous primer (Grade VG-10) @ 5 kg per 10 sqm, putting in premixed bituminous macadam, well rammed and sealed with binder 9.8 kg per 10 sqm, blinded with 0.09 cum of stone chippings, 6.3 mm size and again well rammed (including supply of premixed macadam, binder and chippings), depth of potholes exc 30 mm complete all as specified and directed.

Scarifying or picking gravelled, macadam or bituminous macadam surfaces in area not exc 400 sqm and depth/deep exc 50mm but not exc 100mm and removing scarified material to a distance not exc. 50 M and stacking wherever directed complete all as specified and directed.

M&L for providing and laying 75mm or less thickness (consolidated thickness) premixed bituminous macadam (design mix) with crushed and graded coarse stone aggregate filler (cement) and sand (fine aggregate) mixed with 4% binder content (using paving bitumen VG-30 grade by weight of total mix) mixing bituminous macadam in the hot mix mechanical plant and laid with mechanical paver complete rolled with 8 to 12 tonne power roller to required camber and gradient complete all as specified and as directed. (NOTE : (i) Mixing of BM shall be carried out in Hot Mix plant & laying, spreading of BM shall be carried out uniformly by using automatic type sensor paver. (ii) The design mix for BM considering bitumen content as specified shall be carried out from any one of the Institution as specified in particulars specifications & cost thereof shall be deemed to be included in quoted rate. (iii) The quantity of bitumen shall be provided as per design mix approved by GE)

M&L for applying evenly a priming tack coat of hot paving bitumen (grade VG-10) @ 5 Kg/10 Sqm by using mechanical sprayer operated by hot pressure mechanism complete all as specified and directed.

M&L for preparing existing black top surfaces of road using pressure compressor for cleaning and removing cacked mud etc sweeping with brooms and finally fanning the clean surface with gunny bags to remove all loose dust/dirt etc and applying evenly a priming/tack coat with bituminious primer VG-10 grade @ 2.5 Kg /10Sqm on black top surface with mechanical sprayer operated by hot pressure mechanism complete and providing and laying bituminious premixed asphaltic semi dense concrete (Design mix) 30mm thick (consolidated thickness) with 5.5% paving bitumen of grade (VG-30) binder content by weight of total mix laid with mechanical paver rolled and compacted to required camber and gradient with 8 to 12 ton power roller complete all as specified and directed. (Note :- (i) Mixing of SDAC shall be carried out in Hot Mix plant and laying, spreading of SDAC shall be carried out uniformly by using automatic type sensor paver. (ii) Quantity of the Bitumen shall be provided as per design-mix approved by GE. (iii) Design mix for SDAC considering bitumen content as specified shall be carried out by Contractor from any one of the institution as specified in Particulars Specifications. (iv) Contractor shall submit the authenticated weight batch receipt as per load material in site duly marked vehicle No.)

M&L for applying thermoplastic paint 2.5mm thick for making lines, dashes, arrows, letters etc exceeding 10cm wide on bituminous surfaces, with retro reflective thermoplastic road marking paint with reflector sign glass beads @ 250 gms per Sqm area confirming to MORTH & BIS specification, not less than 2.5 mm thick of white/golden/ yellow as approved colour/ shade and applied with machine, as per manufacturer's instructions including preparation of surface i.e. cleaning of surface by removing all dust, dirt oil grease etc complete all as specified and directed.

S & F in repairs cat eye solar reflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA striplens reflector of model No. DA 972.0 fixed with and including MS stud of suitable size as per manufacturer's instructions including taking out old unserviceable road stud / cat eyes of any description complete all as specified and as directed. (NOTE : Old unserviceable stud / cat eyesshall be contractor's property as per schedule of credit.)

S & F in repairs solar cat eye aluminum alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency Mono rystafie solar panel 2.4V/ 0.3 watt one NI-ed rechargeable battery (1.2V/1600MA) consisting of super bright LED with 10,000 to 18,000 mcd completed as per manufacturer's instructions etc. including taking out old unserviceable cat eyes of any description complete all as specified and as directed.

Dismantling Stone slabs and tiles of any description or thickness in floors, aprons etc. laid dry or laid dry and pointed complete all as specified and directed.

M & L for 75 mm thick PCC 1:4:8 type D-2 (using 40 mm graded stone aggregate) as in sub base complete all as specified and directed.

M&L for Providing and laying 60mm thick factory made (ISI Marked) chamfered edge cement concrete interlocking paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine crushed stone sand, compacting and proper embedding/ laying of inter locking paver blocks into the crushed stone sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with crushed stone sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all specified as directed.

S & F in repairs ISI marked factory made kerb stone, using PCC Type B0, 1:2:4 (using 12.5mm graded stone aggregate), of size 450mm x 300mm x 150 mm thick set in CM (1:3) complete including necessary excavation, tamping ground and removal of surplus soil to a distance not exceeding 50m complete all as specified and as directed. (Note : Sample / make of kerb stone shall be got approved from GE by the Contractor before placing bulk order.)

M&L for Preparation of new surfaces of stone, concrete or plastered surfaces of any description over 10cm girth or width, not otherwise described and applying two coats of synthetic enamel paint over a primer coat complete all as specified & directed.

Roadways construction (BID ID -3364637)

Aadarsh Bharat Enviro Pvt Ltd (BID ID -3354742)

PAVEWAY CONSTRUCTIONS PRIVATE LIMITED (BID ID -3356206)

Sunshine Ventures (BID ID -3356074)

MOHANLAL MATHRANI CONS. PVT. LTD. (BID ID -3348556)