REPAIRS TO CERTAIN MD OFFRS ACCN AND WELCOME MAINTENANCE IN D2 E3 AREA INCLUDING ELECTRICAL WORK IN ZONE A AREA AT NDA KHADAKWASLA

Amount

M&L for preparation of old plastered wall surfaces and applying one coat of distemper oil emulsion including removing of nails and sililar articles etc and fill up POPs hole and cracks with putty and brooming, washing, rubbing down to get the desired finish including cleaning the spilled colour on the floor/skirting complete all as specified and as directed

Complete removal of existing treatment including removing of nails and similar articles etc and fillup POPs hole and cracks with putty incl scrapping to prepare the surface even and smooth, washing, rubbing on walls complete all as specified and directed

M&L for applying avg 1mm thick wall care putty on wall/ceilling in patch and sanding the putty surface upto smooth uniform finish complete all as directed

M&L for applying two coats of distemper oil emulsion over a coat of primer including removing of nails and similar article etc and left over while preparation in above items and fillup POPs hole and cracks with putty including broom, washing, rubbing down the surface to desired finish and including cleaning the spilled colour on the floor/skirting complete all as specified and as directed

M&L for prepration of old treated surfaces and cleaning with scraping to prepare the surface even and smooth, applying one coat of Exterior weather proof (apex ) paint including cleaning the spilled colour on the floor/skirting complete all as specified and as directed

M&L for complete removal of existing treatment like distemper, cement base paint, white wash, painted surfaces on wall/Ceiling, applying avg 1 mm thick birla wall care putty and sanding the putty surface upto smooth uniform finish and applying two coats of Luster paint on wall/ceiling surfaces incl preperation of surfaces including cleaning the spilled colour on the floor/skirting complete all as specified and as directed

M&L for prepration of old treated surfaces and cleaning with scraping to prepare the surface even and smooth, applying one coat of Luster paint including cleaning the spilled colour on the floor/skirting complete all as specified and as directed

M&L for preparation of old decorated surfaces and applying one coat of oil bound distemper on ceiling including cleaning the spilled colour on the floor/skirting complete all as specified and as directed

M&L for preparation of plastered/ unplastered old surfaces of wall & applying one coat of dry distemper including cleaning the spilled colour on the floor/skirting complete all as specified and as directed

M&L for preparation of old painted asbestoes cement ceiling or wooden ceiling surfaces and applying one coat of synthetic enamel paint including cleaning the spilled colour on the floor/skirting complete all as specified and as directed

M&L for preparing plastered old surfaces of wall by washing down & applying one coat of cement base paint complete including cleaning the spilled colour on the floor/skirting complete all as specified

M&L for preparing plastered old surfaces of wall by complete removal of existing treatment by scraping and applying two coat of cement paint complete including cleaning the spilled colour on the floor/skirting complete all as specified and directed.

M&L for preparing old painted wood or wood based surfaces exc 10 cm girth by washing down & applying one coat of synthetic enamel paint. including cleaning the spilled colour on the floor/skirting complete all as specified and as directed

Ditto all as per item No. 13 above but n.exc 10 cm width or girth.

M&L for preparation of old painted surfaces of steel/iron surfaces by cleaning down surfaces exc 10 cm width or girth & applying one coat of synthetic enamel paint including cleaning the spilled colour on the floor/skirting complete all as specified and as directed

Ditto all as per item No. 15 above but n.exc 10 cm width or girth.

M&L for preparation of old painted surfaces of steel/iron surfaces by cleaning down and scrapping the surfaces exc 10 cm width or girth & applying one coat of aluminum paint complete all as specifiecd.

M&L for preparation of old painted surfaces of steel/iron surfaces by cleaning down the surfaces n. exc 10 cm width or girth & applying one coat of aluminum paint complete all as specifiecd.

M&L for preparing old painted surface of wall and applying one coat of synthetic enamel paint over the same complete all as directed.

M&L for providing french polish on previously polished wooden surfaces of any description exc 10 cm width or girth incl cleaning & preparing the surfaces incl a coat of wood filler & applying one or more coats on old surface till the desired finish is obtained including cleaning the spilled colour on the floor/skirting complete all as specified and as directed

Ditto all as per item No. 20 above but n. exc 10 cm in width or girth.

M&L for Writing letters or figures (Block. Roman, Italic or Indian) n exc. 30 cm high with syntheitic enamel paint complete all as specified and as directed

Hacking out old broken glass of any thickness/Size or quality from wooden/metal frame fixed With putty/beading & S&F 3mm thick sheet glass, plain or frosted ordinary quality not exc 0.5 sqm in each pane with glazing clips,wooden beading and putty complete all as specified and as directed

S&F in repairs, curtain rods, MSCP 15 mm dia all as per complete all as specified and as directed

S&F in repairs, L type socket 15 mm dia MSCP for curtain rods complete all as specified and as directed

S&F in repair 25 mm bore aluminium powder coated curtain rod complete all as specified

S&F in repair aluminium powder coated fancy type bracket suitable for 25 mm bore curtain rod complete all as specified and as directed

S&F in repairs 25 mm bore stainless steel (S S -304 ) Curtain rod matt finish weight not less than 1.5 kg/Rm complete all as specified and as directed

S&F stainless steel (S S -304 ) fancy type (shape/Pattern approved by GE) bracket matt finish heavy duty suitable for 25 mm bore curtain rod complete all as specified and as directed

S&F in repairs Fancy type knobs(as approved) for curtain rod ends fixed to wall/ chowkhat as per site reqirement complete all as specified and as directed

Taking down shutters of any description n.exc 1.0 sqm each and rescuring or easing & adjusting after repair in door opening and connected carpentry work complete all as all specified.

All as per item No. 31 above but exc 1.00 Sqm and n.exc 2.00 Sqm each complete all as specified and as directed

S&F in repair Aluminum alloy anodized sliding door bolt 300mm long with hasp and staple (bolt type) and fixing bolts and sliding bolts of extruded such or cast aluminum alloy complete all as specified and as directed

S&F in repair Aluminum anodized barrel tower bolt of extruded section 150mm long complete all as specified and as directed

S&F in repair extruded aluminium alloy handle 'D' Type fabricated type anodized 100mm long.complete all as specified and as directed

S&F in repair extruded aluminium alloy handle 'D' Type fabricated type anodized 150mm long complete all as specified and as directed

S&F in repair MS Butt hinges, medium weight, cold rolled, mild steel length of hinges 100 mm complete all as specified and as directed

S&F Door closer hydraulically regulated, designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80kg and fixed (Al die cast body) and fixed in repairs complete all as specified and as directed

S&F in repairs 32mm bore and 750mm long PVC waste pipe for WHB complete all as specified and as directed

S&F in repairs fibre reinforced PVC connecting pipe 15 mm dia and 60 cm long with brass check nuts and washer both side complete all as specified and directed

S&F in repairs Vitreous china wash down water closet (Pedestal pattern) , white in colour including fixing bolts, connection to drain and to flushing pipe with low level PVC valve less symphonic action type flushing cistern of 10ltrs capacity white in colour with inlet, ball valve float and PVC flush pipe 32mm dia with white seat cover, closed pattern with flat bottom and cover and mild steel chromium plated or hinging device complete all as specified and directed

S&F in repairs vitreous china ware wash basin white, flate back size 550 X 400mm including 32 mm CP waste coupling, chain and plug, waste fittings, union and waste pipe 32mm dia or required length and all necessary inlet, out let connections of 450mm length with C P pillar tap complete all as specified and directed

S&F in repairs for vitreous china squatting Pan Orrisa pattern of size 580 x 440mm white with integral foot rests and provn of lime concrete with high level PVC valve less symphonic action type flushing cistern of 10ltrs capacity white in colour with inlet, ball valve float and PVC flush pipe 32mm dia pipe with brocken flooring tile existing to match etc complete all as specified and directed

S&F in repairs for stop valve cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed for bore of size 15mm dia complete all as specified and directed

S&F in repairs hand shower (health faucet) with 8 mm dia, 1 mtr long flexible tube and wall hook complete all as specified and as directed

S&F in repairs plastic seat cover for EWC, coloured complete with necessary nut, bolts complete all as specified and as directed

S&F in repairs PVC low level flushing cistern with dual flushing system including brackets 10 litre capacity , with inlet ball valve float, handle,flush pipe etc.complete all as specified and directed

S&F in repairs sinks made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and directed

S&F in repairs fancy type pillar tap suitable for 15mm bore pipe cast copper alloy with capstan hands, chromimum plated, screwed shanks and fly nuts fixed to wash hand basin complete as as pecified and directed

S&F in repairs fancy type bib tap suitable for 15mm bore pipe cast copper alloy with crutch or butterfly handle, screwed down with wall flange complete as as pecified and directed

S&F in repairs chromium plated two way bib cock with wall flange 15mm dia Cat No. 29041 of make ‘Fusion (Quarter Turn)' Jaquar series or equivalent as approved by GE. all as specified and as directed.

S&F in repairs glass shelf assembly consisting of 8- 10 mm thick glass sheet glass shelf 12 cm wide with CP bracket , stainless steel guard railing, 60 cm long complete all as specified

S&F in repairs good quality corner glass 8 to 10 mm thick glass sheet 30 cm size with railing around complete all as specified and directed

S & F in repairs chromium plated 2 in 1 wall mixer with provision for both telephone shower and over head shower with 115mm long bend pipe and wall flange M complete all as specified and directed

S & F in repair brass chromium plated 2 in 1 wash basin mixer for mixing hold and cold water screwed down siutable for 15mm dia pipe complete all as specified and directed

S&F in repairs stainless steel Wire cloth 0.56mm nominal dia of Wire and average Width of aperture 1.18mm and fixed with stainless steel stapple/ wooden beads to steel or wooden windows/door/shutters/ frames etc. complete all as specified and as directed

S & F in repairs Toilet paper holder of stainless steel fixed to walls with chromium plated brass screws complete all as specified and directed

S & F in reparis brass chromium plated tubular towel rail 20mm dia D type 60cm long between flanges complete all as specified and directed

M/L Non skid ceramic coloured tiles in flooring 7 to 8 mm thick area of each tile exceeding 0.06 sqm and not exc 0.11 sqm with joint free tiles set and jointed in neat cement slurry and pointed in white or coloured cement to match with 15mm thick cement screed bed in CM 1:6 complete.in patchwork n exc 3.00 Sqm each patch including dismentling of wall tile and floor tile complete all as specified and as directed.

M&L for glazed ceramic tiles in vertical surface 200 X300X7mm/450X300X7 mm / 600x300x7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match colour of tiles over with 15mm thick rendering in cement mortar 1:4 on stone / brick/ concrete masonry as a backing coat all as specified in patchwork n exc 3.00 Sqm each patch including dismentling of wall tile and floor tile complete all as specified and as directed.

M&L in repair for false ceiling 5 mm thick PVC panels (coloured/ designed) i pattern as per approved by Engr-in-charge and including on GI grid frame work consisting grid & GI main tee 32 x 24 mm, cross tee 25 x 24 mm and angle of walls of size 20 x 20 mm all made out of 0.50 mm GI sheet size if grid not less than 600 x 600 mm hung from ceiling using 2 mm GI wire suspendors spacers at 1.2 mtr c/c on main runners including making nitches for light, fan decorative/concealed light fittings and fasteners if required complete all as specified and directed

Removal of old building material/concrete/ concrete block/stone beyond the lead included in the rates, including loading, and stacking at the destination to a distance exc. 5.00 km.out side of MOD land Note: One load shall be consider as 3.00 cum of volume of construction debris

Repair / maintenance of internal light fitting of any type like tube lights / wall bracket light fittings / ceiling lights / bulk head light / mirror lights incuding switches etc in its position, testing all the compenents / parts, wiring etc, identifying and replacing the defective components like tube rod, side holders, holders, lamps, switches, sockets, ceiling roes, etc all as directed by Engr-in-charge. Note: (i) The rate against the above mentioned item is deemed for cost of labour only. (ii) Cost of spares like capacitor, lamp holder, connector, connection wire etc. replaced against above mentioned item will be measured & paid for separately under respective items of Sch 'A' here-in-below. (iii) The contractor's representative will report to concerned JE E/M at 0900hrs daily to collect the list of defects and will submit the completion report on following day before 0900hrs to the JE E/M. (iv) The contractor shall rectify the defects and make the light fittings functional within 24 hours from the time the list of defective lights is handed over to him / his rep by the concerned JE E/M. In case the light fitting is not made functional for whatsoever reason within the specified time limit, an amount of Rs 100/- per such defective light fitting per day will be recovered from the amount due to him through RAR / Final Bill.The contractor shall engage separate team of technicians / repairer for each at Offr Md accn, MES Colony/MES installations & Bombay stadium/PTT area. (v) The contractor shall maintain proper record of repair / maint in a binded compliant register and complaint slip books duly signed by the user and bringing out the details of spares replaced and get it authenticated from concerned JE E/M on daily basis. The contractor shall put up the maint record register to Engineer-in-charge for inspection every Monday or as and when asked for. (vi) The contractor shall maintain sufficient stock of spares / material required for repair / maint of light fittings with the concerned JE E/M against the supply only items here-in-below.

Supply only following spares for light fittings etc of branded make as mentioned in the list of make enclosed with Particular specifications for replacement :- (a) Spring loaded G13 side holders (set of 2) suitable for 36/40W FTL fitting

(b) Supply only PVC / polycarbonate lamp holders batten/Angle type

© Supply only switch piano flush type 5 Amps SP one way complete all as specified.

(d) Supply only switch piano type 15 Amps SP one way all as specified.

(e)Supply only socket 5/6 Amps flush mounted 3 pin all as specified.

(f)Supply only socket 5/15 Amps flush mounted 3/5 pin multi purpose complete all as specified.

(g)Supply only ceiling rose, 2 to 3 terminals /PVC/Polycarbonate, isolated body.

S&F in replacement modular step type fan regulator 120W, 2 module complete all as specified and directed

S&F in replacement modular switch piano type 10 amps one way one module complete all as specified and directed

S&F in replacement modular switch piano type 20 amps one way one module with neon indicator complete all as specified and directed

S&F in replacement modular Socket, 6A - 2/3 pin 2 module complete all as specified and directed

S&F in replacement modular Socket, 6/16A - 2/3 pin 2 module complete all as specified and directed

S&F in replacement of 1 module Blanking plates complete all as specifed and directed

S & F in replacement of switch socket combination 5/6 Amps flush mounted 5 pin multi purpose complete all as specified and directed

S & F in replacement of switch socket combination 5/15 Amps flush mounted 3/5 pin multi purpose complete all as specified and directed

S&F in replacment of fan regulator electronic step type suitable for 1200/1400 mm sweep fan as per the sample provided complete all as specified and directed

S&F in replacement of door bell AC 230 volts single phase ding dong type complete all as specified and directed.

S&F in replacement bell push, flush type 5 Amps complete all as specified and directed

S & F in replacement of switch socket combination with box 5/6 Amps flush mounted 5 pin multi purpose complete all as specified and directed

S & F in replacement of switch socket combination with box 5/15 Amps flush mounted 3/5 pin multi purpose complete all as specified and directed

Taking down carefully copper/aluminium point wiring (light/fan/socket) including all accessories wire, casing caping/conduit, screws etc and making good the disturbed surfaces complete all as specified and directed

M&L for point wiring with 1.5 sq mm copper conductor FRLSH (multistrand) PVC insulated ISI marked unsheathed cable and including surface, Non metalic rigid PVC casing capping double lock type/PVC conduit ISI marked not less than 25 mm with all fitting & other accessories and also including PVC insulated ISI marked unseathed FRLSH cable size 1.5 sq mm copper conductor as earth wire to common earth dolly including PVC box, modular cover plate with frame suitable for modular type switches, sockets, fan regulator etc for following :- (a) One light/Fan point controlled by one way switch 6 Amps 240 volts

(b) All as per item No. 87 above but One 3 pin 6 Amps socket out let point on independent board.

(c ) All as per item No. 87 above but One 3 pin 6 Amps socket out let point on same board.

(c ) All as per item No. 87 above but One bell/buzzer point controlled by one push button on the same board with other switches or independent with cables 1.5 sq mm size.

M&L for point wiring with 2.5 sq mm copper conductor FRLSH (multistrand) PVC insulated ISI marked unseathed cable and including surface, Non metalic rigid PVC casing capping double lock type ISI marked not less than 25 mm with all fitting & other accessories and also including PVC insulated ISI marked unseathed FRLSH cable size 2.5 sq mm copper conductor as earth wire to common earth dolly including PVC box , modular cover plate with frame suitable for 15 Amps socket and switch outlet power point independent circuit

M&L for point wiring in and including new concealed PVC conduit medium grade with the help of multi-stranded unsheathed FRLS copper cable 1.5 sqmm 650/1100V conforming IS : 3419 -1988 adhereing to colour code including earth wire of the size 1.5Sqmm green colored with terminal boxes as required at site steel or cast iron as indicated and shall conform to IS 14772-2000 including making good the distrubed surfaces and matching it with existing surface including PVC box , modular cover plate with frame :- (a) One light/Fan point controlled by one way switch 6 Amps 240 volts

All as per item No. 92 above but One 3 pin 6 Amps socket out let point on independent board.

All as per item No. 92 above but One 3 pin 6 Amps socket out let point on same board.

All as per item No. 92 above but One bell/buzzer point controlled by one push button on the same board with other switches or independent with cables 1.5 sq mm size.

M&L for point wiring in and including new concealed PVC conduit medium grade with the help of multi-stranded unsheathed FRLS copper cable 4sqmm 650/1100V conforming IS : 3419 -1988 adhereing to colour code including earth wire of the size4 Sqmm green colored with terminal boxes as required at site steel or cast iron as indicated and shall conform to IS 14772-2000 including making good the distrubed surfaces and matching it with existing surface including PVC box , modular cover plate with frame suitable for 15 Amps socket and switch outlet power point independent circuit complete all as specified and directed

M&L for secruing loose wiring and repair to point wiring with necessary rigid non metalic PVC casing caping double lock type/ PVC conduit ISI marked of size not less than 25 mm inclusive all accessories complete all as specified and directed.

S&F in repairs flexible conduit pipe ivory grey in colour of dia not less than 25 mm complete all as specified and directed. Make: As per sample approved complete all as specified and directed

M&L for sub main wiring with two single core PVC insulated FRLS cables with stranded copper conductors 1.5 Sqmm , 1100 Volts grade in and including PVC Conduit/casing caping medium grade not less than 25 mm complete with conduit accessories and copper cable 1.5 sqmm continuous earth wire complete all as specified and directed Note: Two runs of 1.5 Sqmm cable with 01 run of 1.5 Sqmm earth wire along with casing caping/conduit shall be measured as one RM

M&L for sub main wiring with two single core PVC insulated FRLS cables with stranded copper conductors 2.5 Sqmm , 1100 Volts grade in and including casing caping/conduit medium grade not less than 25 mm complete with conduit accessories and copper cable 2.5 sqmm continuous earth wire complete all as specified and directed Note: Two runs of 2.5 Sqmm cable with 01 run of 2.5 Sqmm earth wire along with casing caping/conduit shall be measured as one RM)

M&L for sub main wiring with two single core PVC insulated FRLS cables with stranded copper conductors 4 Sqmm , 1100 Volts grade in and including casing caping/conduit medium grade not less than 25 mm complete with conduit accessories and copper cable 4 sqmm continuous earth wire complete all as specified and directed Note: Two runs of 04 Sqmm cable with 01 run of 4 Sqmm earth wire along with casing caping/conduit shall be measured as one RM

M&L for sub main wiring with two single core PVC insulated FRLS cables with stranded copper conductors 6 Sqmm , 1100 Volts grade in and including casing caping/conduit medium grade not less than 25 mm complete with accessories and copper cable 6 sqmm continuous earth wire complete all as specified and directed Note: Two runs of 06 Sqmm cable with 01 run of 6 Sqmm earth wire along with casing caping/conduit shall be measured as one RM

Taking down carefully sub main wiring of any type and size and making good disturbed surfaces complete all as specified and directed

S&F 1100 volts grade heavy duty cable 4 Sqmm two core PVC insulated aluminium solid conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including 4mm suspension wire, one twin core cable flat or circular.

S&F in replacement factory made epoxy powder coated Distribution Board TP & N 4 way double door (VTPN MCCB DB ) MCCB as In comer, with metal door (IP-43 protection) fabricated from CRCA sheet and fixed semi flush to wall and suitable for universal mounting and including 200 Amp copper bus bar, neutral bar, standard DIN rail, Earth bar and cable ties for cable management, top and bottom removable gland plates with Knockout semi flush to wall and making good disturbed surface and touch up with the same finishes complete all as specified (Make/Model of VTPN DB : Legrand/L&T/C&S) Note:MCBs/ MCCBs will be measured and paid seperately under respective Sch A item in the schedule

S&F in replacement MCB DB 12 way SPN double door sheet metal enclosure factory made suitable for MCB DB's 240 volts with 200 amp rated busbar, neutral & earthing link bar,surface mounting complete including taking down the existing DB of any type & size alongwith its accessories by removing from existing circuits and refixing the new DBs and circuits complete as reqd at site complete all as specified and directed Note - MCBs will be measured & paid separately under respective item of sch A, if required to be replaced.

All as per item No 106 above but 08 way SPN DB (Double door)

All as per item No 106 above but 04 way SPN DB (Single door)

All as per item No 106 above but 04 way SPN DB (Double door)

All as per item No 106 above but 02 way SPN DB (Single door)

S&F in repairs distribution box 18 Module 230V, 5 HZ, IP-65 & IK-09 Class-II, weatherproof cabinets, door and cabinet fully reversible, removable chassis and faceplates, including weatherproof glands, rails qty-1 Nos, coppper fork type 100 A busbars as short link including end caps, qty-1 nos, MCB SPN 06 Amp 230V, 50 HZ, complete all as specified and directed Make: Legrand Catpart No.601835 or equivalent in make as mentioned at makes list in PS

S&F in replacement of MCCB with rating of 100 Amps,415Volts 3pole with 16kA breaking capacity,thermal magnetic asdjustable of overload & short circuit release as per IS-13947 & IEC 60947-2 & the service short circuit breaking capacity (Ics) should be equal to ultimate breaking capcity(Icu).MCCB should be with suitable spreaders and phase barriers for each terminals complete all as specified and directed

S&F in replacement of MCCB with rating of 63 Amps,415Volts 3pole with 16kA breaking capacity,thermal magnetic asdjustable of overload & short circuit release as per IS-13947 & IEC 60947-2 & the service short circuit breaking capacity (Ics) should be equal to ultimate breaking capcity(Icu).MCCB should be with suitable spreaders and phase barriers for each terminals complete all as specified and directed

S&F in replacement of C Curve MCB SP 6-32 Amps working on 240 volts,50 Hz 10 KA complete all as specified and directed.

S&F in replacement of C Curve MCB DP 6-32 Amps working on 240 volts,50 Hz 10 KA complete all as specified and directed.

S&F in replacement of C Curve MCB SPN 40-63 Amps working on 240 volts, 50 HZ,10 KA complete all as specified and directed.

S&F in replacement of C Curve MCB TP 63 Amps working on 240 volts, 50 HZ,10 KA complete all as specified and directed.

S&F in replacement of C Curve MCB TPN 40-63 Amps working on 240 volts, 50 HZ,10 KA complete all as specified and directed.

Taking down ceiling fan/exhaust fan of any sweep for servicing / repairing / maintenance, opening up, identifying and replacing the defective parts, cleaning, greasing,etc, reassembling and hanging up/fixing back at its original position, connecting up and testing complete all as directed. Note : 1.Cost of spares such as capacitors, bearings etc will be measured and paid for separately under respective Item of sch A as supply only.

Supply only capacitor of 2.5 mfd for ceiling fan/exhaust fan complete all as specified and directed. Make:Tibcon/Epcos

Supply only bearing No.6201/6202/6203 or any other No matching to the existing size and suitable for ceiling fan/exhaust fan/wall mounted fan complete all as specified and directed.. Make:SKF

S&F in replacment aluminum fan blades sutable for heavy duty exhaust fan of any sweep as per the sample given by the site-in-charge

Disconnecting electric connection and taking down carefully fan of any type and size/sweep as described below, removing the burnt winding of fan motor rewinding with super enarneled copper winding wire of suitable gauge or of matching size to the exisiting wires including all insulating material such as insulation paper sleeve, tape, varnishing etc and reassembling, testing, transporting back to site and reflxing to original position all as directed by Engineer-in-charge for following :- (a) Celling fan of size 1200 sweep.

All as per item No. 123 above but Exhaust fan of 300 mm sweep.

All as per item No. 123 above but wall mounted fan of 400 mm sweep.

M&L for painting the ceiling fan of any sweep with two coats of synthentic enamel paint by rubbing/removing the old paint carefully without any damage to the fan or fan blades complete all as specified.

All as per item No. 126 above but exhaust fan of size 12" (300 mm) sweep

Dismantling and removing rusted louvers (set of 4) suitable for 300 mm sweep exhaust fan supply and fix MS louvers duly painted gray coloured suitable for 300mm heavy duty exhaust fan alongwith four number mounting bracket with bolts, nuts washers etc complete all as directed.

S&F in replacement of high speed wall mounted fan of sweep 400 mm, full copper motor, auto thermal overload protection,compact style and powder coated guards & pull cord switch for speed regulation and oscillation control including connectng up the power cord to the socket and necessary fixing accessories all as specified and directed. Note: Old wall mounted fan should be deposited in MES store yard)

S&F in replacement of Plastic ventilation fan with BLDC motor, energy efficient of 200/250 mm sweep inclduing replacing the plywood as per the site requirement. Note: Old Exhuast fan should be deposited in MES store yard)

S&F in replacement of Metal body ventilation fan of 225 mm sweep inclduing replacing the plywood as per the site requirement complete all as specified and directed. (Note: Old Exhuast fan should be deposited in MES store yard) Make: Bajaj MAXX AIR/ Crompton Greaves Trans Air/ Havells VENTILAIR DB NEO or equivalent makes as mentioned at makes list in PS

S&F in replacement of Metal body ventilation fan of 300 mm sweep inclduing replacing the plywood as per the site requirement complete all as specified and directed (Note: Old Exhuast fan should be deposited in MES store yard) Make: Bajaj MAXX AIR/ Crompton Greaves Trans Air/ Havells VENTILAIR DB NEO

S&F in replacement sheet metal enclosures Single pole and neutral with a two pin and earth plug and socket complete with one single pole MCB 20 Amps, 240 volts complete with all accessaries etc all as directed

S&F in replacement metal clad plug top 3 pin,10Amps, 230 volts, ISI marked heavy duty for geyser connection cord complete all as specified and directed.

S&F in replacement plug top 3 pin, 15/16 amps, 230 volts, ISI marked heavy duty for geyser connection cord complete all as specified and directed.

S&F in replacement plug top 3 pin, 5/6 amps, 230 volts, ISI marked complete all as specified and directed.

S&F in replacement PVC insulated round cable 3 core stranded copper conductor 2.5 sqmm as in connection cord of the geyser complete all as specified and directed.

S&F in replacement PVC insulated cable 2 core stranded copper conductor 0.5 sqmm complete all as specified and directed.

S&F in replacement PVC insulated cable 2 core stranded copper conductor 1 sqmm complete all as specified and directed.

S&F in replacement PVC insulated cable 2 core stranded copper conductor 1.5 sqmm in and including PVC conduit pipe of dia not less than 25 mm complete all as specified and directed

S&F in replacement PVC insulated cable 3 core stranded copper conductor 6 sqmm in and including PVC conduit pipe of dia not less than 25 mm complete all as specified and directed

S&F for earthing complete with galvanised steel earth plate electrode 600x600x6.3mm thick, burried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0 mm dia of minimum 15m length by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No 3 in SSR PART-I connected to earthing test point all as specified or indicated including provision of earthing lead protection pipe, PCC earth pit with cover, excavation & earth work, testing on completion etc all as specified and directed by Engr-in-Charge.

S&F in replacement 3mm thick white coloured hylam sheet (bakelite) for mounting switches complete all as directed.

S&F in replacement of GI pipe bracket of 25 mm dia 1 mtr long bend to shape for street light fitting made out of 25 mm dia GI light grade pipe fixed on pole using suitable FI clamp including necessary new nut, bolt and washer complete all as specified and directed.

S&F in replacement LED building security light fiitting 30 W, IP-65 protection made up of die cast alluminium housing with high power LED as lighting source and lens embeded PC cover having TOP opening seperate driver compartment complete all as specified and directed by Engr-in-charge. Make- Luker LSTE-30/ Havells ENDURACITYLITEPLAT PLUSSL30WLED757SASYBOPC / Wipro LR02-331-XXX-57-XX or equivalent makes as mentioned at makes list in PS Note: Old security light should be deposited to MES store

S&F in replacement 1x20 watt, 230V surface and wall mounted emergency LED batten having backup upto 4 hours with polycarbonate housing and integrated electronic electronic driver including connecting up with twin core twisted flexible copper conductor cable from ceiling rose all as specified and directed . Make: Luker LTGT520 or or equivalent makes as mentioned at makes list in PS

S&F in replacement 1x10 watt,230V surface and wall mounted LED batten suitable for mirror light with polycarbonate housing and integrated electronic electronic driver including connecting up with twin core twisted flexible copper conductor cable from ceiling rose all as specified .

S&F in replacement of 18/20watt,230V surface and wall mounted LED batten, extruded aluminium housing with polycarbonate diffuser and integrated electronic driver including connecting up with twin core twisted flexible copper condctor cable from ceiling rose all as specified. Make- Luker LT5M20 / Havells ENDURALINEARNEOBS20WLED865SPCWH or equivalent makes as mentioned at makes list in PS

S&F in replacement of 36 watt, 230V surface and wall mounted LED batten, IP65 rated protection suitable for outdoor application with polycarbonate diffuser and integrated electronic driver including connecting up with twin core twisted flexible copper condctor cable from ceiling rose all as specified and directed. Make- Luker LTOD40 or equivalent in as mentioned at makes list in PS

S&F in replacement LED tube light with diffused optics ultra bright LED tube light 18/20watt with high efficiency suited for installation in existing T8 tube light with G13 lamp holders complete all as specified and directed.

S&F in replacement 1x18/20W, 230V surface and wall mounted batten suitable for installing LED Tube including connecting up with twin core twisted flexible copper conductor cable from ceiling rose all as specified and directed. Make- Luker LLTS1 or equivalent in as mentioned at makes list in PS

S&F in replacement 40 W suspended LED Light with high efficiency providing soft-light and glare free symmetrical illumination including suspension kit including connecting up with twin core twisted flexible copper cable from ceiling rose to fitting complete all as specified and directed. Make: Havells Cat part No. CONSTA1144LP40WLED840SPCWH or or equivalent makes as mentioned at makes list in PS

S&F in replacement Decorative wall mounting brushed nickel fixture suitable for B22 base bulb upto 14 watt including 01x10 W LED bulb (warm white) and connecting up with twin core twisted flexible copper conductor cable from ceiling rose all as specified and directed. Make: Halonix catpart no.HLWB-01-B22 or equivalent in as mentioned at makes list in PS

S&F in replacement 1x10 watt, 230V surface mounted LED downlight with white powder coated polycarbonate housing and pressure die-cast heat sink having high efficiency, including connecting up with twin core twisted flexible copper condctor cable from ceiling rose all as specified and directed. Make - Luker Cat part no. LBKRDSL10 /Havells INTEGRANEOSURFA CEDLS10WLED857S or equivalent in as mentioned at makes list in PS

S&F Electronic driver suitable for 25 watts LED building security light fittings as per existing make complete all as specified and directed

S&F in repalcement recess mounted 2' x 2' LED Panel lights 40 W LED 5700K, 240Volts and glare free symmetrical illumination suitable for Armstrong/Grid ceiling, Environmental friendly, new generation, energy saving, high power LED as a light source with clear diffuser and separate replaceable electronic driver including connecting with twin core wire and also matching to the adjacent ceiling surfaces carefully all as specified and directed. Note: The quoted price shall include the cost of Light and its driver. Make: Luker Cat Part: LPS40 or equivalent makes as mentioned at makes list in PS

S&F in repalcement recess type LED ceiling lights 20 W LED with ceiling cut out of Ø 160 mm Environmental friendly, energy saving, recess mounted downlighter with separate replaceable electronic driver including connecting with twin core wire, including cutting the existing false ceiling dia to the required size and also matching to the adjacent false ceiling surfaces carefully all as specified and directed. Make: Luker cat part no. LDR20 or equivalent in as mentioned at makes list in PS

S&F in replacement of Picture light LED (warm white) fitting of 1x12 Watt individual LED lenses bronze coloured complete all as specified and directed. Make: PHILIPS 919216000000 12W Picture Light, Bronze or or equivalent makes as mentioned at makes list in PS

S&F in replacement of LED high glow bulb 5 watt, Warm White in colour of base E27 complete all as specified and directed.

S&F in replacement of LED high glow bulb 5 watt, Warm White in colour of base E14 complete all as specified and directed.

S&F in replacement of LED high glow bulb 5 watt, Warm White in colour of base B22 complete all as specified and directed.

S&F in replacement of Electronic driver for 20 watts Ceiling lights as per the existing make complete all as specified and directed.

S&F in replacement of PVC unbreakable surface boxes of size 4"x4".complete all as specified and directed.

S&F in replacement of PVC unbreakable surface boxes of size 6"x6" complete all as specified and directed.

S& F in replacement of PVC unbreakable surface boxes of size 4"x7" complete all as specified and directed.

S& F in replacement of PVC unbreakable surface boxes of size 6"x8" complete all as specified and directed. .

S& F in replacement of PVC unbreakable surface boxes of size 8"x10" complete all as specified and directed.

S&F in replacement for white cover plate with frame 1 or 2 module complete all as specified and directed. . Make:As per the sample given

S&F in replacement for white cover plate with frame 3 module complete all as specified and directed. . Make:As per the sample given

S&F in replacement for white cover plate with frame 4 module complete all as specified and directed. .Make:As per the sample given

S&F in replacement for white cover plate with frame 6 module complete all as specified and directed. .Make:As per the sample given

S&F in replacement for white cover plate with frame 8 module complete all as specified and directed. .Make:As per the sample given

S&F in replacement for white cover plate with frame 12 modulecomplete all as specified and directed. .Make:As per the sample given

S& F in replacement PVC unbreakable surface boxes suitable for modular switches 1 or 2 module.complete all as specified and directed.

S& F in replacement PVC unbreakable surface boxes suitable for modular switches 3 module complete all as specified and directed. .

S& F in replacement PVC unbreakable surface boxes suitable for modular switches 4 module complete all as specified and directed. .

S& F in replacement PVC unbreakable surface boxes suitable for modular switches 6 module complete all as specified and directed.

S& F in replacement PVC unbreakable surface boxes suitable for modular switches 8 module complete all as specified and directed.

S& F in replacement PVC unbreakable surface boxes suitable for modular switches 12 module complete all as specified and directed.

S&F Stationary type electric water heater closed/vented type , inner body made out of copper of capacity 25 Litres suitable for 230 volts, single phase AC 50 HZ Supply ISI marked to IS;2082 (Part /1993) (reffirmed 2004) with latest amendments and having BEE Star (5 Star Rating) complete with all accessories and fittings as per requirement and depositing old water heater of any type and capacity to MES Store yard complete all as specified and directed

Taking down carefully and refixing geyser of any size/make with necessary fastners/clamps and making good any disturbed surface all as specified and directed

Disconnecting and taking down existing userviceable geyser of 25 ltrs capacity of any make/brand, taking it to civil workshop for repairing. Opening the geyser and dismanting all parts and taking out inner tank/container, removing dents making to shape including welding / brazing the leakage portion, filling the portion between inner tank and out casing of geyser with new glass wool heat insulating material . Reassembling and painting the outer casing of geyser with two coats of superior quality synthetic enameled paint and re- fixing to original place all as directed Note : .Cost of spares such as will be measured and paid for separately under respective Item of sch A as supply only.

Supply only thermostat 0-85⁰C suitable for geyser of 25 ltrs capacity complete all as specified and directed.

Supply only thermostat and cutout set electronic type, temperature adjustable from 0-80⁰C suitable for geyser of 25 ltrs capacity complete all as specified and directed.

Supply only heating element of capacity 2 KW of any type and shape suitable for Existing 25 ltrs capacity geysers as per sample provided by Engr-in-Charge

suply only flow unit (inner pipe assembly) suitable for geyser of 25 ltrs capacity of any brand/make and for vertical/Horizontal type including rubber ring/gasket. complete all as specified and directed.

S&F in replacement metallic flexible hot water connection 600 mm long including necessary washers suitable for geysers of 25 ltr capacity complete all as specified and directed.

S&F in replacement of neon lamp indicator square/round type after taking out old incl taking down old one complete all as specified and directed. .

S&F in replacement NRV valve of size 15mm dia of Brass complete all as specified and directed.

S&F in replacement thermostat 0-85⁰C suitable for geyser of 25 ltrs capacity complete all as specified and directed..

S&F in replacement thermostat and cutout set electronic type, temperature adjustable from 0-80⁰C suitable for geyser of 25 ltrs capacity complete all as specified and directed..

S&F in replacement heating element of capacity 2 KW of any type and shape suitable for Existing 25 ltrs capacity geysers as per sample provided complete all as specified and directed.

S&F in replacement flow unit (inner pipe assembly) suitable for geyser of 25 ltrs capacity of any brand/make and for vertical/Horizontal type including rubber ring/gasket complete all as specified and directed..

S & F in repair of Solar Water Heating System Flat Plate Collector type, size : (2.0 x 1.0) Mtr based on direct transfer of heat of capacity 100 Ltrs Per day with suitable electric backup of 2 KW complete all as specified and directed by Engr-in-Charge. Make : Skylark Thermal Energy System

M & L for cleaning the hot water insulated tank of 100 ltrs capacity of Solar Water Heating System Flat Plate Collector Type by removing the sludge /foreign material from the tank and recifying the fault of water leakages complete all as specified and directed.

M & L for cleaning the Glass of Solar Flat Plate Collector Panel of size (2.0 x 1.0) Mtr by removing the mud/algee/foreign materials from the panel on half yearly basis complete all as directed. Note : If any damages occurred to the solar panel during this job, contractor shall be responsible to make good without any extra cost to the deptt.

Supply and install in replacement of Solar Flat Plate Collector Panel of size (2.0 x 1.0) Mtr, suitable /compatible to existing system complete all as specified and directed. Make : Skylark Thermal Energy System as OEM

S & F in replacement of composite PEX-AL-PEX pipes as per ASTM F 128-2017 of size inner dia 15 mm and outer dia 20 mm, suitable/compatible to existing system complete as specified and directed.. Make : Kitec or its equivalent.

S & F in replacement of CPVC pipes of size outer dia 16 mm with all standard fittings such as suitable size of MS clamps, screws, hooks, Elbow, bends, tees etc complete all as specified and directed.

S & F in replacement of heating element of 3 KW capacity duly ISI marked, 1-ph, 240 volts suitable/compatible to existing solar heating system complete all as specified and directed.

S & F in replacement Brass/Gun Metal Butterfly gate valve of 15 mm dia, ISI marked, suitable/compatible to extisting system complete all as specified and directed.

S & F in replacement of SS pipe flange of 15 mm dia or suitable/compatible to existing solar Flat plate collector system including suitable size of nut bolts and washers etc complete all as specified and directed.

M & L for Glass of Solar Flat Plate Collector Panel of size (2.0 x 1.0) Mtr by removing the existing broken glass and cleaning before installing new complete all as specified and directed. Note : If any damages occurred to the solar panel during this job, contractor shall be responsible to make good without any extra cost to the deptt.

S&F in repairs 15mm bore bib taps, fancy type, cast chromium plated, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

S & F in replacement of rubber gaskets 15 mm dia or suitable/compatible to existing solar Flat plate collector system complete all as specified and directed.

Sunil Constructions