RENOVATION OF SEATING ARRANGEMENT IN AUDITORIUM AT TAG UNDER GE SOUTH WEST NEW DELHI

Amount

Taking down unserviceable chairs of any description carefully without damaging existing carpet and removing the same from work site complete all as specified and directed.

M&L for providing & fixing at site as per standard trade practice Godrej Make Glamour Audi chair or equivalent in Durian / Featherlite as approved by GE with Saddle Brown colour or colour as approved by Garrison Engineer complete all as specified and as directed, the seat rest assembly shall be 1.2±0.1 cm thick, flat plywood measured as per QA method described in OCP-QLTA-P14-18 and insitu-moulded with polyurethane foam & shall be upholstered with 3 layered foam laminated fabric and injection moulded cover. The seat shall be auto tip-up type and folds when not in use. The Seat profile shall be developed to help the users to get necessary comfort in popliteal region. The size of seat shall be: 45.0 cm. (W) x 48.5 cm (D) x 14.5 cm (T) Approx. The backrest assembly shall be made up of 1.2±0.1cm thk flat plywood measured as per QA method described in OCP-QLTA P14-18 upholstered with 3 layered foam laminated fabric and injection moulded back cover. The back foam shall be designed with contoured lumbar support for extra comfort. The size of back shall be: 47.5 cm. (W) x 80.0 cm (H) x 12.5 cm (T) Approx. The HR polyurethane foam for Seat and Back shall be moulded with Density= 48 +/- 2kgs/m3. The leg frame assembly shall be fabricated from M.S. tube 6.0±0.03cm x 4.0±0.03cm x 0.2±0.016cm thk. welded with grouting member. It shall be black powder coated (Df'T40-60 microns) & grouted to the floor using anchors & epoxy/chemincal. The size of anchors/fastners will be designed as per site requirement and will not be less than 16mm dia & 150mm long. Minimum 04 (Four) Nos anchors/fastners shall be provided per chair. It shall consists of the following: (a) P.U. ARMREST: The armrest shall be made up of black integral skin Polyurethane with 65+/-10 Shore 'A' hardness and reinforced with M.S. insert fixed with leg frame. The armrests shall be scratch and weather resistant. The armrest shall be available without cup holder.

(b) ARMREST CLADDING: The armrest cladding shall be made up of 0.9±0.05cm thk particle board & upholstered with fabric. All steel components are Epoxy Polyester Powder Coated (DFT 40-60 microns). The 3 layered foam laminated fabric shall be available in two shades - Ruby Red and Azure Blue - so as to create desired patterns in the layout. The auditorium chair shall be designed to get mounted/grouted on floors with existing carpet flooring without damaging the existing carpet & finishing the carpet flooring in original shape. Overall Dimensions shall be Seat Height - 43.0 cm, Height - 107.0cm, armrest c/c - 54.6 cm, Width & Depth as measured from pedestal - Width-64.0cm and Depth-67.5 cm.

M&L for vacuum cleaning the seating area including fabric carpet, etc after completion of chair installation to leave behind the auditorium very neat & clean in a presentable state and sanitizing the auditorium using highly skilled professionals complete all as specified and as directed

INDO CONSTRUCTION

VINAY ENTERPRISES