8590 REPAIR MAINTENANCE SERVICING OF DG SETS UPS AND OTHER MISC WORK IN NEW CHSC AND OTHER CONNECTED AREA UNDER AGE EM II OF GE SOUTH PUNE

Amount

Servicing of DG sets by carryout inspection / checking of cylinder assembly, piston system, piping system, cylinder liners, radiator function and cleaning thoroughly with cleaning agents, repair any mechanical and electrical fault etc. including replacement of defect / unserviceable spare parts with new one (if any) complete all as directed for the following capacities of DG sets located at different locations: - (i) 1010 KVA DG sets model Cummins at New CHSC - 6 nos. Note for item nos 01 to 04: - (a) Spares parts (if any) shall be measured and paid separately under item nos.20 to 31 & 25 to 37 of BOQ as “Supply only”. (b) The cost of labour & T & P required for servicing of DG Sets shall be deemed to be included in unit quoted rates of this item. The contractor is responsible to provide 24x7 call back service and repair facility through skilled, competent and well experienced technician. No DG Set will be left unserviceable more than 4 hrs. If DG set found unserviceable for more than 04 hrs from the time it was reported to the contractor during the term of this contract recovery @ Rs.1000.00 per such Non-functional DG Set per day will be imposed and will be recovered from the amount due to the contractor. Regarding this the decision of Accepting Officer shall be final and binding. (c) All dismantled old unserviceable items, except those listed in schedule of credit, retrieved from any DG set shall be deposited to MES store yard.

All as per item No 1 above but 380 KVA DG Set model Cummins at MDTC - 2 nos.

All as per item No 1 above but 320 KVA DG set modet Greaves cotton at new CMDC - 1 nos

All as per item No 1 above but 30 KVA DG set model Ashoka Leyland at 20 Single Officers and 17 MNS - 2 nos

S&F in replacement V belt for fan / water pump assembly etc suitable for 1010 KVA DG set, complete all as directed.

S&F in replacement V belt for fan/water pump assembly etc suitable for 320/380 KVA DG set, complete all as directed.

S&F in replacement V belt for fan/water pump assembly etc suitable for 30 KVA DG sets, complete all as directed.

S&F in replacement neoprene rubber gaskets of suitable size, complete all as directed.

S&F in replacement gasket for Exhaust manifold for 1010 KVA DG set, complete all as directed.

S&F in replacement gasket for Exhaust manifold 320/380 KVA DG set, complete all as directed.

S&F in replacement Air hose set for 1010 KVA DG set, complete all as directed.

S&F in replacement Air hose set for 380/320 KVA DG set, complete all as directed.

S&F in replacement water hose set for 1010 KVA DG set, complete all as directed.

S&F in replacement water hose 380/320 KVA DG set, complete all as directed.

S&F in replacement water hose for 30 KVA DG sets, complete all as directed.

S&F in replacement hose clamp set for 1010 KVA DG set, complete all as directed.

S&F in replacement hose clamp set for 380/320 KVA DG set, complete all as directed.

S&F in replacement hose clamp set for 30 KVA DG sets, complete all as directed.

S & F in replacement water temperature gauge complete as per site requirement suitable for DG set of capacity 1010 / 380 / 320 / 30 KVA including taking down existing one, complete all as directed.

S & F in replacement water temperature sensor and cable complete as per site requirement suitable for DG set of capacity 1010 / 380 / 320 / 30 KVA including taking down existing one, complete all as directed.

Supply only Air filter elements suitable for 1010 KVA DG set, complete all as directed.

Supply only Air filter elements suitable for 380/320 KVA DG set, complete all as directed.

Supply only Air filter elements suitable for 30 KVA DG sets, complete all as directed.

Supply only oil filter suitable for 1010 KVA DG set, complete all as directed.

Supply only oil filter suitable for 380/320 KVA DG set, complete all as directed.

Supply only oil filter suitable for 30 KVA DG sets, complete all as directed.

Supply only Diesel filter suitable for 1010 KVA DG set, complete all as directed.

Supply only Diesel filter suitable for 380/320 KVA DG set, complete all as directed.

Supply only Diesel filter suitable for 30 KVA DG sets, complete all as directed.

Supply only By-pass filter suitable for 1010 KVA DG set, complete all as directed.

Supply only By-pass filter suitable for 380/320 KVA DG set, complete all as directed.

Supply only By-pass filter suitable for 30 KVA DG sets, complete all as directed.

S&F in replacement solenoid valve for 1010 KVA DG set including taking down existing one, complete all as directed.

S&F in replacement solenoid valve for 380/320 KVA DG set including taking down existing one, complete all as directed.

S&F in replacement solenoid valve for 30 KVA DG sets including taking down existing one, complete all as directed.

Supply and toping up of engine oil of grade SAE 15 W 40 as directed in standard packings / sealed container including taking out existing one, complete all as directed. Make:- HP / Servo / valvoline / BPCL

Supply and toping up of distilled water in standard packing /sealed container including taking out existing one, complete all as directed.

Supply and toping up of coolant in standard packings / sealed container including taking out existing one, complete all as directed.

Supply and applying Petroleum jelly on battery terminals , complete all as directed.

M &L Lifting loading and transportation of lead acid battery to work shop and repair to lead acid battery of 12 volt of 90/150/180 AH by filling up of distilled water, changing of worn out cells, changing of unseviceble electrode / electrolyte etc, complete all as directed.

Supply and fix in repairs battery terminal made out of brass / bronze heavy duty suitable for 150 AH/180 AH 12 Volt Battery, complete all as directed.

S&F in replacement PVC insulated multisranded, copper conductor single core 70 sqmm multistranded of 1.25 mtr long each duly fixed with brass clamps, copper lugs suitable for DG sets installed at different locations from battery to starter as battery leads, complete all as directed.

Overhauling, repairing, calibartion of FIP set as per manufacturer's instruction and replacement of unserviceable component by providing new ones as per existing size and make all as required at site suitable for DG Set 1010 KVA, complete all as directed.

All as per item no 43 above but DG Set 380/320 KVA, complete all as directed.

All as per item no 43 above but DG Set 30 KVA, complete all as directed.

Disconnecting all incoming and outgoing rubber hose & drain out checking radiator assembly of the following various capacities of DG sets and taking down the radiator assembly transporting the same to civil workshop for carrying out servicing, cleaning thoroughly the choke pipe, soldering / brazing the leakage pipe after completion of said activities, re-fixing the same to its original position of 1010 KVA capacity DG sets complete all as directed by Engineer-in-charge.

All as per item no 46 above but DG set 380/320 KVA, complete all as directed by Engineer-in-charge.

All as per item no 46 above but DG set 20 KVA, complete all as directed by Engineer-in-charge.

S&F in repair AMF controller suitable for DG set 1010 KVA including taking down existing one, complete all as directed.

S&F in repair AMF controller suitable for DG set 380/320 KVA including taking down existing one, complete all as directed.

S&F in repair AMF controller suitable for DG set 30 KVA including taking down existing one, complete all as directed.

Supply and fix in repair automatic voltage regulator suitable for 380/320 KVA DG set with facility of auto / manual mode as per existing capacity and make suitable for DG sets complete as per existing DG sets all as directed by Engineer-In-Charge.

Supply and fix in repair automatic voltage regulator for 1010 KVA DG set with facility of auto / manual mode as per existing capacity and make suitable for DG sets complete as per existing DG sets all as directed by Engineer-In-Charge.

Disconnecting all electrical cable connection from 12 Volts DC self starter for carrying out repairs, re-winding of self starter motor with super enameled copper wires of size matching to the existing one complete with varnishing, drying, providing insulating material etc and complete overhauling the system including replacing the unserviceable parts such as bendex, contacts etc and re-assembling & re-fixing the self starter to its original position including connection of cables & testing etc complete all as specified and directed by Engr-in-charge. Note: spare parts except material required for rewinding of self starter shall be measured and paid separately

All as per item no. 54 above but 24 Volts DC self starter etc complete all as specified and directed by Engr-in-charge.

Supply only carbon brush of existing make, suitable for self starter complete all as directed

Supply only carbon brush holder of existing make, suitable for self starter complete all as directed

Supply only bearing of existing size, make-SKF, suitable for armature complete all as directed

Supply only bendex drive of existing size & make, suitable for armature complete all as directed

Supply only battery terminal posltive / negative heavy duty of suitable model for 180 AH capacity battery complete all as directed

M&L for disconnecting all electrical connections from burnt out alternator diesel engine set any type any make, removing burnt out winding wires from alternator slot without damage to existing structure including any other connected accessories and cleaning the alternator internally and externally and re-winding of the same with existing gauge copper wire and number of suitable runs used for winding including with applying two coats of varnishing and re-assembled the same winded alternator and greasing to all parts, tightening of all electrical terminals, removing dust from armature/stator and applying varnishing including testing etc complete all as specified and directed by Engr-in-charge for DG set of capacity 1010 KVA DG set

All as per item no.61 above but 380/320 KVA DG set etc complete all as specified and directed by Engr-in-charge.

All as per item no.61 above but 30 KVA DG set etc complete all as specified and directed by Engr-in-charge.

S&F in replacement of self starter with new one, suitable for 24 Volt DC operation Make - Lucas including disconnecting and taking down existing unserviceable self starter & depositing to MES store yard complete all as directed

Supply, fixing, testing in replacement of Speed control unit suitable for 1010 KVA as per exising make, complete all as directed.

Supply,fixing, testing in replacement of Speed control unit suitable for 380/320 KVA as per exising capacity /make, complete all as directed.

Supply and fix in repair fuel steel braided pipe with benjo bolt and washers etc of length 60cm long, complete all as directed.

Supply and fix in repair pressure guage 0 to 7 Kg/sqcm along with sensor and cable complete all as directed by Engineer-In-Charge.

Supply and fix in repairs lead acid battery 12 Volts 150 AH with initial charging and having indicators to know the status of level of electrolyte , complete all as directed. Make-Exide / CUMMINS / Amaron.

S & F in replacement Reverse Power relay suitable for DG panel of 1010/380/320 KVA DG set as per site requirement including taking down existing one complete all as specified and directed. Make L&T MRP11 or equivalent in Legrand / ABB/ Havells

S&F in repair electronic timers including taking down exsiting one, complete all as directed.

S&F in repair single phase preventer including taking down existing one, complete all as directed.

S&F in replacement of Digital Multifunction Meter 4410 Series LED, Accuracy Class 1, with RS 485 Parameters V, A, F, PF, kW, kVA, kVAR, kWh, kVAh, kVARh, Runhours etc. without disturbing other accessories and taking down old unserviceable meters etc complete all as specified and directed at site.

Supply & Installation in replacement of DC Ammeter / Voltmeter and taking down old unserviceable meters etc complete all as specified and directed at site.

Supply & Installation in replacement of under voltage / over voltage proection relay including taking down existing one complete all as specified and directed at site.

S&F in repair Indicating lamp (Red/Yellow/Blue) LED type including taking down existing one, complete all as directed.

S&F in repair Push botton including taking down existing one, complete all as directed.

S & F in replacement emergency stop button push and turn type as per site requirement including taking down existing one complete all as specified and directed.

S & F control wiring of 1.5 Sqmm size single core stranded FRLS PVC insulated copper conductor cables of suitable size properly tagged and secured for indicators/ Meters etc. including suitable size of copper lugs, PVC CABLE ducts , suitable size of galvanised or cadmium plated high tensile nuts, bolts and washers etc complete all as specified and directed.

S & F control wiring of 2.5 Sqmm size single core stranded FRLS PVC insulated copper conductor cables of suitable size properly tagged and secured for indicators/ Meters including suitable size of copper lugs, with galvanised or cadmium plated high tensile nuts, bolts and washers etc complete all as specified and directed.

S & F in replacement Aux contactor block and add on block 2no+2nc suitable for DG panel of 1010 KVA DG set as per site requirement including taking down existing one complete all as specified and directed. Make:- L&T MO 0 or equivalent in Legrand / ABB / Havells

S & F in replacement Aux contactor block and add on block 2no+2nc suitable for DG panel of 380/320 KVA DG set as per site requirement including taking down existing one complete all as specified and directed. Make- L&T MO 0 or equivalent in Legrand / ABB / Havells

S & F in replacement 12 window Annunciator as per site requirement including taking down existing one complete all as specified and directed. Make- Minilec or equivalent in Legrand/L&T/Havells

S & F in replacement Panel hooter as per site requirement including taking down existing one complete all as specified and directed.

S&F in replacement Micro PLC for Auto Load Management (Allen Bradley / Siemens) as per Logic mentioned in specifications, comprising required Auxiliary relays, (24V DC, indication lights, Push button, Emergency stop, A/M position switch 1 Pole, Battery charger (230V A/C / 24V DC), PLC - CPU - 226, 24V DC of Siemens make or equivalent, Digital I/O card, analogue card, 24V DC power supply as required, complete all as directed.

S & F in replacement power contactors of AC1, 400 Amps, 4 Pole, 415 volts including taking down old unserviceable existing one complete all as specified and directed. Make L&T/LS Electric/Legrand/ABB/Havells

S&F Fuel level pipe of 10 mm dia including taking down existing one complete all as specified and directed.

M&L for repair of Space Heater circuit including replacment of thermostat 0-180 °C as per site requirement including taking down existing one complete all as specified and directed.

S&F in replacement of fan of existing make, suitable for Panel Ventilation as per site requirement including taking down existing one complete all as specified and directed.

M&L for Preparation of old painted surfaces of the DG Set fuel tank and connected GI Pipe etc painting the same with two coats of approved synthetic enamel paint of approved shade complete all as specified and directed by Engr-in-Charge.

M&L for preparation of existing surface for painting of Chimney for exhaust of height 22.00 m by removing old paint by scraping with scrap paper, sand paper, priming with a coat of red oxide heat resistance primer and applying two coat of super enamel synthetic heat resistance paint suitable for temperature upto 200 Degree Centigrade, complete all as specified and as directed. Note:- Contracor will be provided all the safety equipments such as safety belt etc. to the labour at his own cost.

M&L for writing SM/MES Number on DG set of approved synthetic enamel paint of approved shade and appropriate size of letters complete all as directed by Engr-in-Charge.

Taking down the unserviceable turbo charger assembly after disconnecting the mechanical connections from DG Set of capacity 1010 KVA of any make / type opening and thoroughly checking to carrying out repairs to the turbo charger assembly and replacing the turbo charger repair kit and mirror spares as required including calibrating, servicing and assembling and re-fixing back the turbo charger assembly to its original position and testing complete all as specified and directed

Taking down the unserviceable turbo charger assembly after disconnecting the mechanical connections from DG Set of capacity 380/320 KVA of any make / type opening and thoroughly checking to carrying out repairs to the turbo charger assembly and replacing the turbo charger repair kit and mirror spares as required including calibrating, servicing and assembling and re-fixing back the turbo charger assembly to its original position and testing complete all as specified and directed

Dismantling of existing 5 HP motor centrifugal pump set from foundation and applying one coat of synthetic enameled paint after cleaning and preparing the surface complete, reinstalling and testing complete at site on full load complete all as directed by Engr-in-Charge.

M&L for disconnecting of all electric connections from 3 phase motor of 5 HP capacity including transportation from site to workshop for re-winding and re-fixing the same after replacing unserviceable winding from the motor with new one including cleaning the starter slots, rewinding with appropriate size and or existing super enameled copper winding wire and insulating to the existing class of insulation, cleaning the starter assembly including fixing of terminal, copper lugs, insulation etc. complete, testing and assembling the same complete all as directed by Engineer-in-Charge. Note : (i) If pump motor is required on urgency (the same will be intimated by JE/Engr-in-charge) then the Contractor will be provided the same and install a temporary pump motor on their own arrangement & cost within the 4 hours of dismantling otherwise a penalty of 1000.00 per day will be recovered from contractor’s dues and the cost of these provisions will be deemed to be included in contractor’s unit quoted rates of this item. (ii) Pump/Motors will be returned and fixed after repair within 3 days of intimation of unserviceable; if the same is not re-installed within the stipulated period then a penalty of 1000.00 per day will be charged. (iii) Unserviceable Pump motor will be examined by the contractor in presence of the Engr-in-Charge before transporting to the workshop and defective parts which have to replaced to be noted down.

Material and labour for comprehensive maintenance of following 160 KVA UPS – 03 Nos. system along with regular preventive maintenance service of UPS system and checking serviceability of on line UPS of following capacity make & type including replacement of its faulty/worn out parts / components / accessories and removal of any functional disorder of UPS system and to make UPS system serviceable complete round the clock to provide un-interrupted power supply to Hospital services complete all as directed by Engr-in-Charge:- (a) 160 KVA capacity UPS – 03 Nos Make- Schneider (APC), Model - E3MUPS160KHS Notes for item nos. 101 to 103:- (i) The entire comprehensive maintenance of UPS system shall be carried out through OEM or OEM approved dealer and the defective components/ parts of different UPS system shall be replaced with original existing make only. (ii)The contractor may visit the site for inspection with services engineer of OEM/ Manufacturer of UPS system before quoting his rate. (iii) The cost for removing and fixing of any faulty / worn parts / components/ accessories of original equipments manufacturer (OEM) such as fuses, capacitors, SC's Diodes, Logic card / PCB's switches, CTs Chokes, Heat sinks, IP, O/P and control transformer, SCVS, changeover panels alarm simulation, filters, cooling fan, wheels etc or any other parts/components/accessories as required for making UPS system serviceable are deemed to be included in unit rate quoted by the contractor and nothing extra cost on this account will be entertained by the Department on this account.

Note :- (Contd........) (iv) The contractor shall make the arrangement to attend the complaints of UPS on receipt round the clock including Sunday and holiday and the cost of the same shall also be deemed to be included in the quoted rate. The penalty for non rectifying the complaints of UPS within 6 hrs shall be levied @ Rs 500.00 and 6 hrs to 12 hrs shall be @ Rs 1000.00 and @ Rs 1500.00 thereafter per complaints per day. (v) The dust cleaning shall be carried out of each UPS in a week. (vi) Maintenance / repair as enumerated above shall be undertaken by the manufacturer or their authorized dealer/ representative. (vii) The cleaning of interior and exterior of system, filters, operation of cooling fan, checking of all wiring terminals, batteries connections, check the manual bypass system and normal bypass system of UPS shall be carried out of each UPS periodically. (viii) The electric connections shall be checked regularly for looseness / tightening if required the same for un-interrupt power supply. (ix) The contractor shall maintain a log book of each UPS system and record all the weekly / fortnightly / monthly periodical maintenance and also maintain record of all components / parts / accessories which are replaced during weekly / fortnightly / monthly periodical maintenance and get signature of JE and Engr-in-Charge shall be carried out in rotation apart from breakdown for each UPS and record of the same to be maintained duly signed by contractor and the Department representative. (x) The contractor shall measure input and output phase to phase voltage, current and load and will be maintained necessary records. (xi) The contractor shall maintain necessary and sufficient spares parts have to be kept ready with him for immediate replacement at site.

All as per item no 101 above but 100 KVA capacity UPS – 02 Nos., Make- Schneider (APC), Model - E3MUPS100KHS, complete all as directed by Engr-in-Charge.

All as per item no 101 above but 60 KVA capacity UPS – 03 Nos Make- Schneider (APC), Model - E3MUPS60KHS, complete all as directed by Engr-in-Charge.

Supply & installation including testing and commissioning of SMF battery, 12 volt, 100 AH with battery copper terminals / thimbles, battery inter-connection copper cable of size 16 Sqmm etc, complete all as directed by Engr-in-charge. Make : Amaron / Exide / Panasonic

Supply & installation including testing and commissioning of SMF battery, 12 volt, 150 AH with battery copper terminals / thimbles, battery inter-connection copper cable of size 16 Sqmm etc, complete all as directed by ENgr-in-charge. Make : Amaron / Exide / Panasonic

Supply, laying, testing and commissioning of 4 Core x 25 Sq.mm XLPE insulated, overall PVC sheathed, armoured, (Heavy duty) copper conductor cables suitable for working voltage up to and including 1100 Volts, laid and tied on overhead cable trays; or laid and tied over mild steel supports in masonry trenches with and including providing mild steel supports and clamps of suitable size & shape etc complete including fixing to supports or buried in ground including termination with single compression brass glands complete all as directed by Engr-in-charge. Note:- Excavation & earth work shall be measured and paid for separately

All as per item No 106 above but 4 Core x 16 Sq.mm "CU", complete all as directed by Engr-in-charge.

All as per item No 106 above but 4 Core x 10 Sq.mm "CU", complete all as directed by Engr-in-charge.

All as per item No 106 above but 2 Core x 10 Sq.mm "CU", complete all as directed by Engr-in-charge.

All as per item No 106 above but 2 Core x 6 Sq.mm "CU", complete all as directed by Engr-in-charge.

All as per item No 106 above but 1 Core x 150 Sq.mm "CU", complete all as directed by Engr-in-charge.

All as per item No 106 above but 1 Core x 70 Sq.mm "CU", complete all as directed by Engr-in-charge.

All as per item No 106 above but 1 Core x 50 Sq.mm "CU", complete all as directed by Engr-in-charge.

All as per item No 106 above but 1 Core x 35 Sq.mm "CU", complete all as directed by Engr-in-charge.

S&F in replacement rectifier control card of existing make including testing and commissioning suitable for 3 phase online UPS system, complete all as specified and directed

S&F in replacement inverter control card including testing and commissioning suitable for 3 phase online UPS system, complete all as specified and directed

S&F in replacement IGBT Drive card including testing and commissioning suitable for 3 phase online UPS system, complete all as specified and directed

S&F in replacement input sensing transformer including testing and commissioning suitable for 3 phase online UPS system, complete all as specified and directed

S&F in replacement output feedback transformer including testing and commissioning suitable for 3 phase online UPS system, complete all as specified and directed

S&F in replacement LCD display including testing and commissioning suitable for 3 phase online UPS system, complete all as specified and directed

S&F in replacement control and power cable including testing and commissioning suitable for 3 phase online UPS system, complete all as specified and directed

S&F in replacement cabinet including testing and commissioning suitable for 3 phase online UPS system, complete all as specified and directed

S&F in replacement UPS Charger Chord including testing and commissioning suitable for 3 phase online UPS system, complete all as specified and directed

M&L for maintenance free grounding Solution set earthing comprising of 17.2 mm pure copper earthing rod, 3m long, copper terminal size of 40x6mm with 2 Nos. M8 holes for termination. Electrode must be tested for a short circuit test of minimum 40 KA at CPRI / NABL. The earthing electrode will be placed in the ground after a bore is drilled to the depth of 3.5 m. The bore drilling will be done with the help of a Pneumatic boring machine, 50 Kgs BFC will be placed in the bore to cover the earthing rod from all sides. BFC will be poured in Slurry form in a properly mixed condition. The Earth pit cover Square 300x300x240 mm size to be provided to cover the earth pit and shall be made of reinforced FRP and should be capable of carrying the weight of 5 Tons, complete all as directed by Engr-in-charge. Make : "U-PROTEC" earthing Pvt Ltd or equivalent in Ashlok safe earthings electrode Ltd /JEF technology NOTE :- (a) Rates of boring 3.50 m for earth electrode, copper strip 25x3 mm up to 7.5 Mtr from earth electrode is deemed to be included in quoted rates. (b) On testing, after completion, if the earth resistance <5 ohms is not obtained, earthing will be rejuvenated at no extra cost to the Department untill the desired earth resistance is obtained.

S&F control card (Cummins part No A054J968) suitable for 1010 KVA DG set including carefully disconnecting control wires and reconnecting the same after completion all as per OEM Specification and taking down old existing one including testing etc complete all as directed by Engr-in-charge.

S&F in replacement of spike protection device (Cummins part No AX1016838) suitable for 1010 KVA DG set including carefully disconnecting control wires and reconnecting the same after completion all as per OEM Specification and taking down of old existing one including testing etc complete all as directed by Engr-in-charge

S&F in replacement DOL starter, fixed in existing panel suitable for 5 HP, 415 volts as per existing including wiring from motor to DOL starter with suitable size copper conductor cable complete all as specified and directed. Make-L&T/Siemens/ABB/Havells

S&F in replacement foot valve’s brass assembly 50 mm dia complete all as specified and directed. Make - Normex/Zoloto/CAIR

S&F in replacement of 80mm dia non return valve of brass / gun metal complete all as specified and directed. Make - Normex / Zoloto / Cair

S&F in replacement of 50mm dia non return valve of brass / gun metal complete all as specified and directed. Make - Normex / Zoloto / Cair

S&F in replacement of 25mm dia non return valve of brass / gun metal complete all as specified and directed. Make - Normex / Zoloto / Cair

S&F in replacement of 20mm dia non return valve of brass / gun metal complete all as specified and directed. Make - Normex / Zoloto / Cair

M&L for disconnection of electrical and Diesel connection of the flame proof centrifugal pump and motor of capacity 5 HP from base plate and transport to work shop, carefully for opening and replacement of bushes, mechanical seal, ball bearing rubber gasket nut and bolt fixing the require new parts (parts such as shaft impeller, coupling, mechanical seal and bearing etc will be measured and paid separately respective items of BOQ as "Supply only") and complete re-fixing its in original position and making good all electrical and water connection and testing complete all as directed by Engr-in-charge. Note : The cost of transportation of motor from site to workshop & return back and reinstalling the same on existing foundation and testing and commissioning etc will be deemed to be included in unit quoted rates.

Supply only shaft of existing make & size suitable for centrifugal pumps for 5 HP capacity, complete all as directed by Engr-in-charge

Supply only GM empeller of existing make & size suitable for centrifugal pumps for 5 HP capacity, complete all as directed by Engr-in-charge

Supply only MS coupling of existing make & size suitable for centrifugal pumps for 5 HP capacity, complete all as directed by Engr-in-charge

Supply only bearing of existing make & size suitable for centrifugal pumps for 5 HP capacity, complete all as directed by Engr-in-charge

Supply only mechanical seal of existing make & size suitable for centrifugal pumps for 5 HP capacity, complete all as directed by Engr-in-charge

Supply only pump gasket fitting of existing make & size suitable for centrifugal pumps for 5 HP capacity, complete all as directed by Engr-in-charge

S&F in repairs MCCB, 4P, 500 Amps, 36 KA breaking capacity with adjustable thermal and adjustable magnetic overload protection with Ics=100% of Icu complete all as specified and directed. Make L&T / Legrand /ABB / Havells

Shriyansh sales and services (BID ID -3087503)

PROLINK COMPUTERS (BID ID -3077064)

RELIABLE ENTERPRISES (BID ID -3076975)