REPAIR TO CULVERT, DRAIN COVER WITH CI GRATING, GATES, SIGN BOARD ETC AND CERTAIN MISC WORKS UNDER AGE (B/R) CENTRAL UNDER GE (W) COLABA, MUMBAI.

Amount

Excavation in trenches n. exc 1.50 m wide and n.exc 1.50 m in depth for and getting out in soft loose soil all as specified and directed.

M&L in repairs 300 mm bore (internal dia of pipe) reinforced concrete pipes, Class NP3 laid in trenches and jointed in CM (1:1) all as specified and directed.

M&L PCC 1:3:6 type C2, (using 40 mm graded crushed stone aggragate) as in concrete bed to 300 mm bore drain pipe including packing under and completely haunching surrounidng pipes with concrete after pipes are laid and tested all as specified and directed.

M&L in repairs 450 mm bore (internal dia of pipe) reinforced concrete pipes, Class NP3 laid in trenches and jointed in CM (1:1) all as specified and directed.

M&L PCC 1:3:6 type C2, (using 40 mm graded crushed stone aggragate) as in concrete bed to 450 mm bore drain pipe including packing under and completely haunching surrounidng pipes with concrete after pipes are laid and tested all as specified and directed.

Returning, filling in, including spreading, leveling, watering and well ramming in layers not exc 25 cm all as specified and directed.

Removing excavated (soil) materials and deposited out of MD land up to a distance of 15 km all as specified and directed.

S&F in repairs PVC tensile fabric structure with PVDF (polyvinyl-idene-fluoride) coating with all necessary fixtures, of any size and shape for making canopies, shade etc fixed with mild steel structural frame work, weight of the fabric is considered, with fabrics ranging from 900 GSM all as specified and directed. Make: Mehler / Sieon / Haytes / Farrari or equivalent as approved GE. Note :- (i) The shape / Design of the shads shall be as approved by GE.

S&F in repairs rolled mild steel sections conforming to Gde Fe-410-W(Gde-E-250 ) quality B as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails & guides for sliding doors, fixed with angle cleats or other connecting plates all as specified and directed.

Demolition of brick work or stone masonry work built in cement mortar including all quoins, arches, pillars etc and including removing debris/rubbish materials off the site out side MoD land all as specified and directed.

Demolition of cement concrete of any description and in any position not otherwise speially provided for such as bottom and sides of drain including removing debris/rubbish materials off the site out side MoD land all as specified and directed.

Taking down cement plaster on brick or stone walls including raking out joints, hacking for key scrubbing down with water including removing debris/rubbish materials off the site out side MoD land all as specified and directed.

M&L brick work with sub class 'B' bricks straight or curved on plan exc 6 mtr mean raddius built in CM 1:6 all as specified and directed.

All as item N0 13 above but expect brick

M&L 15 mm thick Ready Mix Plaster in single layer of make / brand - ACC's Accoplast / CK Birla's Aerocon / Speed Dry Mix's Ecoplaster / Magic Plast / Build well, on other than fair faces of concrete surfaces in wall ( internal surface ) and surfaces finished even and smooth without using extra cement all as specified and directed. Name of Manufacturer: M/s Premier Floor to Roof Materials pvt. ltd/ M/s ACC Products / M/s Ultratech Cement Ltd/M/s Sound buildcare pvt. Ltd/ or other approved equivalent make.

M&L PCC 1:2:4 type B-0 (using 12.5 mm graded crushed stone aggregate) as in coping, bed concrete and all other similar work incluidng necessary formwork complete all as specified and directed.

M&L PCC 1:3:6 type B-2 (using 40mm graded crushed stone aggregate) as in surface channel and drains and like all as specified and directed.

S&F in repairs mild steel work such as grills, gratings etc with the ends of bars shoulderd and/ or riveted or formed into spikes framed guard bars, barred iron doors; ladders; framed balusters; walk ways; railings; frame work of water tanks and similar work, rail & similar fixing with bolts where required conforming to grade E165 as per IS 15911: 2010 all as specified and directed.

M&L in repairs Factory made CI grating drain cover, heavy duty, single seal comforming to Fe-150, IS-210-1978 icluding 2 sets of drain cover lifting and unlocking key to suit each other type drain cover (sample as approved by GE) all as specified and directed.

S&F in repairs precast RCC jalli & pillars with cement concrete 1:2:4 type B-0 (using 12.5 mm graded crushed stone aggregate), thickness of RCC jalli 35 mm (measured solid) including all mouldings & frame, set in cement mortar 1:4 to precast pillars, grooves and including reinforcement of 4mm dia annealed wire @ 100 mm c/c spacing on both side alongwith pillars decorative round dome type on top of size 75 x 75 mm with reinforcement 4 mm dia annealed wire 4 Nos with stirrups 4 mm dia @ 150 mm c/c spacing and one number 8 mm dia TMT bar at centre iall as specified and directed.

All as per item No. 21 above but except pillars.

S&F in repairs Aluminium composite panel sheet 3mm thick PVCF wooden or plain finished of brand name 'Euro bound'/"Alstrong"./ "Viva" fixed with necessary aluminium tube of size 25mm x 38mm x 1.5mm thick with required cilicon & screw as in ceiling/coloumns and in vertical surface as per approved samples as kept in GE Office all as specified and directed.

M&L in repairs best quality granite (of any type) tiles 18 mm thick machine cut, beded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing all as specified and directed.

Molding (Sandwitch moulding) of granite slab edges as directed by Engr-in-charge including polishing all as specified and directed.

M&L in repairs for exterior digitally 3D printed wall tiles designs as approved by GE, thickness of tiles 8 mm and area n exe 0.06 sqm each tiles etc set & jointed in neat cement slurry and pointed in coloured cement to match the shade of tile including 10mm thick rendering or backing layer in cement mortar 1:4 all as specified & directed. Make – Kajriya/Johnson or equivalent as approved.

M&L in repairs for exterior wall tiles as approved by GE, thickness of tiles 8 mm and size 300 x 600 mm each tiles etc set & jointed in cement slurry and pointed in coloured cement to match the shade of tile and laid over 10mm thick rendering or backing layer in cement mortar 1:4 all as specified & directed. Make – Kajriya/Johnson or equivalent as approved.

S&F in repairs stainless steel grade 304 (square/ round / rectangular) of suitable gauge as in gaurd bars / railing /frame work including all fixing arrangement all as specified and directed.

M&L for preparation of old plastered or unplastered surface of wall including cornices etc. by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salt and trading oil and greasy spots and removal of vegetation and and applying two coats of weather proof acrylic exterior paint (100% Acrylic) (Apex Ultima protek, Make : Asian Paints) through authorized applicator only all as specified and directed. Make: Asian Paints / Berger Paints / Nerolac / Shalimar paints as approved by GE complete all as specified and directed.

S&F in repairs retroreflective sign board of size 1.20 x 0.60 m both side comprising of the following :- (a) Excavation in post holes each not exceedubg 0.50 cum and getting out, returning filling in and ramming earth of broken rubble mixed with earth around in layers not exceeding 25 cm thick watering and removing surplus soil to a distance not exceeding 50 mtrs and making good surface complete. (b) PCC 1:11/2:3 type A-1 (using 20 mm graded crushed stone aggregate) as in foundation of size 250 x 250 x 450 mm complete. (c) 0.56 mm thick aluminium sheet of size 1.56 m x 0.92 m framed with Stainless steel railing with horizontal and vertical pipe of 32 mm dia on ground in PCC. Height of board from ground level shall be 2.37 m complete. (d) Retroreflective sheeting as prescribed in (c) above on aluminium sheeting both side white or coloured having a smooth outer surface, retroreflective shall be of high intensity grade with encapsulated lence (the message, ledgends, letter, number etc.) and other shall be 100/150 mm size complete.

S&F in repairs factory made precast RCC drain cover of size 900 mm x 600 mm x 100 mm thick and fixed to drain in CM (1:4) all as specified and directed.

Unitech Enterprises

ASHOK CONSTRUCTION

SHRI SAI ENTERPRISES

Nilesh Construction

Shivam Enterprises

GANGAJAL

M/s Qureshi Construction Co

Bidder Name

Unitech Enterprises

Nilesh Construction

ASHOK CONSTRUCTION

SAHU AND SAHU CO.

SHRI SAI ENTERPRISES

M/s Qureshi Construction Co

GANGAJAL

Shivam Enterprises