REPAIR REPLACEMENT OF ROOFING FALSE CEILING LEAKAGE SEEPAGE DRAIN PIPE WALL PANELLING AND OTHER MISC WORK AT AFS DIGARU

Amount

Dismantling framed timber scantling 40 Sqcm and over in section in any position complete all as specified and as directed.

Second class hard wood in scantling, clean sawn timber in purlins, posts, rafters etc fixed with nails complete all as specified and as directed.

Dismantling asbestos cement (corrugated, semi corrugated) sheets in roof covering complete all as specified and as directed.

Pre - painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall fixed with self tapping screws complete all as specified and as directed.

Pre - painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in ridge fixed with self tapping screws complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided complete all as specified and as directed.

Rolled mild steel work in tubular trusses and posts including special shaped washer etc. complete using ERW or induction butt welded, tubes conforming to IS 1161-1979 grade St.-240 complete all as specified and as directed.

Dismantling boarding of any description, fixed in any position with nails complete all as specified and as directed.

20 mm thick 2nd class hardwood boarding, fixed with nails, clean sawn, plain or feather edged as in eaves board etc. complete all as specified and as directed

Interlocking aluminium powder coated snap grid consists of main Tee runners of size 38mm x 25mm x 1.00 mm, spaced 1200mm centre to centre and cross Tee of size 25mm x 25mm x1.00mm, 1200 long spaced between the main Tee at 600mm centre to centre to form a grid of 1200mm x 600mm and provide a secondary cross Tee 25mm x 25mm x 1.4mm (of length 600mm) to be interlocked of the centre of 1200mm x 600mm panel to form a grid of 600mm x 600mm and wall angle 25mm x 25mm x 1.5mm . Aluminium alloy extruded section shall be aluminium anodized ( minimum 15 micron) and shall conform to IS 733, IS 1285 and IS 737, and providing and fixing with Hangers of 4mm dia GI (upto 1200mm length ) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40x 3mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long size of grid 600 x 600mm complete all as specified and as directed.

Asbestos cement building boards 4mm thick fixed or laid in aluminium frame work with screws as in ceiling complete all as specified and as directed

12 mm thick perforated particle board/tiles for insulation and accoustic purpose of size (600x600) mm fixed with nails to timber frame work or on snap grid frame work as in ceiling flat or sloping with screws (design and colour as per Engineer in Charge directions) complete all as specified and as directed

Second class hard wood plain fillets of size exceeding 3 Sqcm but not exceeding 6 Sqcm, square, rectangular or triangular in section, wrought, secured with nails complete, all as specified and as directed.

Preparation of wood and wood based surface of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

Taking down cement plaster on brick or stone walls, etc including raking out joints, hacking for key, scrubbing down with water complete all as specified and as directed

Rendering 15 mm thick in cement mortar (1:4) on other than fair faces of brick work surfaces and finished even and smooth without using extra cement complete all as specified and as directed.

PCC (1:3:6) type C2 using 40mm graded crushed stone aggregate as in coping including necessery formwork complete all as specified and as directed.

Preparation of old plastered surfaces of wall and applying one coat of oil bound distamper complete all as specified and as directed.

Preparation of old plastered surface of wall and applying one coat of cement base paint complete all as specified and as directed.

Preparation of old painted wooden surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed

Pre-laminated particle board 12 mm thick, interior grade, pre-laminated both sides decorative choice laminations including cleats fixed in panel inserts etc complete all as specified and directed.

Aluminium anodised powder coated section (min thickness 50 microns) as in frame for panelling, partitions and similar work complete all as specifed and as directed

Demolition and breaking up PVC drain pipes of any size including all fittings, set in cement mortar complete all as specifed and as directed.

110mm bore PVC (SWR) pipes, Grade “A”, single socketed in any length with rubber ring joints, fixed to walls, complete all as specified and as directed.

110mm bore, PVC (SWR) junction double,(double T) equal or unequal with access door , complete all as specified and directed.

110mm bore, PVC (SWR) junction single,(single T) equal or unequal with access door , complete all as specified and directed.

110mm bore, PVC (SWR) bends with access door any radius, complete all as specified and directed.

75mm bore PVC (SWR) pipes, Grade “A”, single socketed in any length with rubber ring joints, fixed to walls, complete all as specified and directed.

75mm bore, PVC (SWR) bends with access door any radius, complete all as specified and directed.

Mild steel works as in bands, straps; hold fast; wall ties; plain angle cleats for securing purlins to rafters; Knee piece inserts; plate washers and similar small articles conforming to Fe 410-0 or Fe 310-0 complete all as specified and directed.

Ms N D Enterpise

M.S. Construction

M/S RUPDEEP ENTERPRISES

M/S B.H. ENTERPRISE

M/S DAS CONSTRUCTION

G.R CONSTRUCTION

FRIENDS ENTERPRISE