SPECIAL REAPIR TO CERTAIN B/R ITEMS NEAR BOUNDARY WALL AND CONNECTED WORKS AT AF STN LEH UNDER GE (AF) LEH

Amount

Dismantling of posts or struts (wood,steel or RCC) any section, including taking out embedded portion and making good disturbed (Natural ground/ concrete, brick work ) full length of post to be measured complete all as specified and directed by the Engineer in Charge.

Dismantling of chain link fencing wire mesh,any type including barbed wire fencing, folding servicable fencing for reuse complete all as specified and directed by the Engineer in Charge.

Excavation in post holes (or similar holes) each not exc. 0.5 Cubic Metre and getting out, returning filling and ramming earth or broken rubble mixed earth around in layers not exceeding 25cm watering and removing surplus spoil to a distance not exc. 50 m and making good surface in Hard dense soil , complete all as specified and directed by Engineer-in-Charge.

Plain cement concrete (1:4:8), type D-2, using 40 mm graded mechanically crushed stone aggregates as in foundations, filling and mass concrete or in sub base to floor, complete all as specified and directed by the Engineer in Charge.

M&L for providing cement concrete type B1 1:2:4 (20 mm graded aggregate ) in roof kerbs or mud stop, rounded or chamfered on edge, in lintels upto 1.5 m clear span, cills, steps, seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railing upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, including necessary formwork as complete all as specified and directed by Engineer in charge.

S&F steel section, angle iron or core for posts or stuts in fencing and framed work nosing to steps including embeding in concrete and serewing ect. wind ties for roof including securing bolts, cutting tops to shape as directed, drilling holes, notching for wire etc flat iron fillets (for securing wire mesh etc) incl all necessary drilling, bolting or reviting etc and similar works confirming to FE-290 Gde E-165 complete all as specified and directed by the Engineer in Charge.

Mild steel screw bolts 16 mm dia of shank factory (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, length of bolt exe. 5cm but n. exc 10 cm long , complete all as specified and as directed by the Engineer-in-Charge. Note-Length of ordinary bolts shall be measured from the underside of the head to the end of shank)

Supply only mild steel galvanised chain link fencing with 50x50mm nominal pitch of wire of size dia 3.00mm to 3.5mm and weight not exceedind 4 Kg per Square Metre , complete all as specified and as directed by the Engineer-in-Charge. Note: Unit weight of chain link fencing shall be ascertain by BOO.

Fixing only chain link fencing including line wires,any mesh, size and type of standred, rails, staining ,bolt, etc , including provision of binding wire , complete all as specified and directed by Engineer-in-Charge. Note:- Supply of chain link and mild steel galvanised line wire shall be measured and paid separately under respective item of this schedule .

S&F Galvanized 2 strand, steel barbed wire 2.24 mm dia, barbed with 2mm dia barbs at 75mm spacings, and straining and fixing to any type of standard rails, straining bolts, including securing or tying at crossings with and provision of galvanized mild steel wire staples, or steel pins etc fixed as in complete all as specified (each line of wire to be measured), complete all as specified and directed by Engineer-in-Charge.

Preparation of new steel surfaces of any description exceeding 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer, complete all as specified and directed by Engineer-in-Charge.

Preparation of new steel surfaces of any description not exceeding 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer, complete all as specified and directed by Engineer-in-Charge.

Note : Schedule of credit to be deducted on acceptances of bid.Details of Schedule of credit is given in tender documents

N K BUILDERS

M/S KOHINOOR METAL

M/S RIGDOL CONSTRUCTION

SHUBHAM ENGINEERS & BUILDERS

G and G Infratech Private Limited