DAY TO DAY MAINTANANCE INCLUDING PERIODICAL SERVICES IN CAMP I AND CAMP II AREA AT AF STATION KALAIKUNDA UNDER GE (AF) KALAIKUNDA

Amount

Resecuring or easing & adjusting without taking down shutter of any description of wooden joinery Not exceeding 1 Sqm each.Complete all as specified and as directed.

All as per Item No 1.0 above bu Exceeding 1 Sqm n.exc 2 Sqm each

All as per Item No 1.0 above but Exceeding 2 Sqm each

S & F in repair stainless steel wire cloth, 0.36 mm dia of wire and average width of aperture 1.4 mm and fixed with stainless steel wire staples including fixing with new nut bolt and refix old flat iron over wiremesh..Complete all as specified and as directed.

S & F in repair mild steel 300mm, ordinary rat tail rod pattern springs including roller and roller plate .Complete all as specified and as directed.

S & F in repair 3mm thick plain Sheet glass, ordinary quality and glazing with oil putty and pins in square n exc 0.5 sq. m in each pane on wooden/steel joinery including hacking out complete all as specified

S & F in repair 3mm thick figured Sheet glass pin headed type and glazing with oil putty and pins in square n exc 0.5 sq. m in each pane on wooden/steel joinery hacking out complete all as specified

M & L Securing glass of any description in existing wooden/steel frames glazed with putty/ beads including removing loose or decayed putty/ beads, painting/oiling one coat on rebates, grooves, reputtying and painting/oiling puttied surface to match existing work (New length of frame reputtied shall be measured).Complete all as specified and as directed.

S & F in repair 20mm dia stainless steel Harrison rails/curtain rod, mild steel, chromium plated with fixing brackets, stops, rollers etc.Complete all as specified and as directed.

S&F GI tube 15 mm dia medium grade galvanised with all fittings laid in floors /wall etc Including taking down old unserviceable. complete all as specified

Refixing old steel tubing and connections 15mm bore in new or old position (valve, ceiling , floors) etc complete all as specified and as directed.

S&F GI tube 20 mm dia medium grade galvanised with all fittings laid in floors /wall etc.including taking down old unserviceable. complete all as specified

Refixing old steel tubing and connections 20mm bore in new or old position (valve, ceiling , floors) etc complete all as specified and as directed.

S & F in repair Sintex water tank PVC Cover (Dhakkan) tied with wire suitable for 500 Ltr and 1000 Ltr capacity water storage tank.Complete all as specified and as directed.

S & F in repair SS Pegset( Set of 6 Hook) fancy type Cloth Hanger.Complete all as specified and as directed.

S & F in repair 15mm dia Pillar taps, cast copper alloy, with capstan heads, chromium plated, fancy type screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed with min weight.Complete all as specified and as directed.

S & F in repair 15mm dia Stop valves, cast copper alloy chromium plated fancy type , screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed.Complete all as specified and as directed.

S & F in repair 15mm dia Bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed. (Minimum weight 15mm-90gms/20mm- 125gms).Complete all as specified and as directed.

S & F in repairs 15mm dia Pillar taps of PTMT any colour high pressure screwed for iron pipe and fixed.(Minimum weight 15mm-110gms).Complete all as specified and as directed.

S & F in repairs 15mm dia Stop valve of PTMT any colour high pressure screwed for iron pipe and fixed. (Minimum weight 15mm-90gms/ 20mm-92gms).Complete all as specified and as directed.

S & F in repairs 20mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. Complete all as specified and as directed.

All as per Item No 21 above but 25 mm dia

S & F in repair Grating doom 100mm dia of PTMT (Minimum weight 25gms) fixed with cement.Complete all as specified and as directed.

S & F in repair Swivel shower of PTMT any colour for fixing with 15mm pipe. (Minimum weight 40gms).Complete all as specified and as directed.

S & F in repair PVC connections 15mm size with PTMT nuts of length 450mm

S & F in repair PVC connections 15mm size with PTMT nuts of length 600mm

S & F in Repairs of rubber washer for stop cock, bib tap, Pillar tap ,gate valve of any type all as specified and directed

S & F in Repairs brass spindle suitable for Cp piller tap,cp bib tap,angle cock all as specified and directed

S & F in repairs MS Peg stays to steel windows including fixing or welding.Complete all as specified and as directed.

S & F in repair mild steel handles to steel windos all as specified and directed.

S&F in repair 32mm bore PVC waste down take pipe 900 to 1000mm fixed in WHB.

S&Fin repair 40 mm bore PVC waste down take pipe 900 to 1000mm fixed in sink.

S & F 75 mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints laid in floors or trenches including taking complete all as specified.

S & F 110 mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints laid in floors or trenches including taking down complete all as specified.

S & F 75 mm bore PVC (SWR) bends of any radius with access door.

S & F 110 mm bore PVC (SWR) bends of any radius with access door.

S & F 75 mm bore PVC (SWR) branch piece single (Single `Y') equal or unequal with access door.

S & F 110 mm bore PVC (SWR) branch piece single (Single `Y') equal or unequal with access door.

S & F 75 mm bore PVC (SWR) Vent Cowl.

S & F 110 mm bore PVC (SWR) Vent Cowl.

S&F in repairs toilet paper holder with flat recessed type stainless steel complete all as specified and directed

S&F in repairs health faucet ((ABS Body) mild steel chromium plated suitable for 15mm dia pipe with 1.25 meter long flexible tube and ABS wall 1.25 m long flexible tube and ABS wall hook including making connection and fixed in position complete all as spd

S&F in repairs 32mm dia Waste coupling, brass , chromium plated for glazed ware , basins , etc. with long screwed shanks and fly -nuts , flange end bedded in red lead cement and other end fixed

S&F in repairs 40 mm dia Waste coupling, brass , chromium plated for glazed ware , basins , etc. with long screwed shanks and fly -nuts , flange end bedded in red lead cement and other end fixed.Complete all as specified and as directed.

S&F in repairs tubular towel rail 20 mm dia ‘D’ type 60 cm long between flanges of brass chromium plated including brackets. complete all as specified and as directed.

S&F chromium plated central hole basin mixer single lever without popup waste system with 450 mm long braided hoses.Complete all as specified and as directed.

S&F in repair angle cock 15 mm bore fancy type chromium plated, with capstan head, high pressure, screwed down, screwed for iron pipe or for brass ferrule fixed to iron pipe.

S&F in repair Stop valve cast copper alloy screwed down high pressure with capston headed handle chromium plated concealed type screwed both ends for iron pipe 15 mm bore or for unions.Complete all as specified and as directed.

S&F in repair C.P bib taps cast copper alloy with capston headed handles, screwed down screwed for iron pipe 15 mm bore or for brass ferrule.Complete all as specified and as directed.

S&F in repair plastic water closet seat cover, Cream / white colour, closed pattern with flat bottom and cover and mild steel chromium plated aluminium hinging device for pedestral pattern WC.Complete all as specified and as directed.

S&F glass self assembly consisting of 5.5 mm thick glass sheet glass self 12 Cm wide with CP bracket gaurd and railing 60 Cm long all as specified.

S&F chromium plated single lever wall mixer 3-in-1 system with provision of both hand shower complete with 115mm long bend pipe, connecting legs and wall flange.Complete all as specified and as directed.

S&F in repairs Gun metal, globe or gate valve with iron wheel head, 20 mm bore, screwed both ends for iron pipe.Complete all as specified and as directed.

S&F in repairs Door seal (Snake guard) with Aluminium frame powder coated suitable for 900 to 1000mm door opening complete all specified

Supply & Fixing in repairs Vitreous China Ware Wash hand basin white flat back size 550mmx400mm without pedestal, cutting for and pinning ends of brackets or erecting stand including CP coupling 32mm dia complete all as specified.

S&F in repairs Vitreous China Wash down water closet pan (Pedestal pattern), white incl P or S trap and in cluding plastic seat cover etc (excluding flushing cistern and flush pipe) complete all as specified and as directed

S&F in repairs vitreous china squatting pan 'Orissa' pattern size 580x440mm white with integral foot rests (excluding flushing cistern and flush pipe) including connection to trap and complete all as specified and as directed

Dismantling AC (corrugated or semi corrugated) sheets in roof covering.

S&F in repairs two way bib cock 15mm with single knob and wall flange complete all as specified and directed.Make:Cera or equivalent.

S &F 6mm thick asbestos cement, corrugated or semi-corrugated sheets in roofs, walls etc. fixed with L or J-type hook or cranked bolts.Complete all as specified and as directed.

All as per Item No 61 above but refixing only/exept sheets only.

Dismantling Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.

S&F Pre painted galvalume aluminum zinc coating GI bassed corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpas in Roof covering fixed with self Tapping screw Complete all as specified and as directed.

All as per item no 64 above but fixing only with providing new self tapping screw with bituminous washer covered with silicon based compound to stoping any leakage.

S&F Plain, galvanised, mild steel sheeting, 0.5 mm in ridges, hips, valley gutters, drip and straight flashings roof covering fixed with self tapping screw complete (length and girth as fixed) with grade of zinc coating 275

Dismantling structural steel work including doors, gates,guard bars but excluding framed trusses etc.

M&L Rolled section as in Rafter purline strut etc using MS angle FI or hollow square section Fe-290(Gde E-165) etc including cutting welding nut bolt etc.Complete all as specified and as directed.

M&L for framed work as in door or gates of angle or other section complete drilled for fixing of steel sheeting or other covering etc. to be prepared for hanging with and including hooks or hinges and hanging also fastening and fixing.Complete all as specified and as directed.

S&F mild steel plain black sheet 1.00mm thick as in covering to doors shutters etc cut to size edges beaded holes punched, including rounded scraws or rrivets and fixed to wooden steel memberes etc with plain 40mm lap joints or walds/reavated inlcluding bolt.Complete all as specified and as directed.

M&L for welding in repairs n.exe 2.5 cm in length on metals to be welded n.exc. 6 mm thick each.

Dismantling floor,hearth or wall tilling including cement mortar bedding ( but not backing), removing serviceable tiles to store and rubbish off the premises.Complete all as specified and as directed.

M&L Glazed ceramic coloured tiles 300×600x7 mm thick or 450x300x7mm (coloured) on vertical surfaces such as dado skirting and rise to steps etc. set and jointed in neat cement slurry and pointed in coloured cement to match over & incl. 15mm screed in CM1:6.Complete all as specified and as directed.

M&L Glazed ceramic coloured tiles in vertical surface 300x600x7mm and 450x300x7mm mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over & incl. 15mm screed in CM1:6.Complete all as specified and as directed.

M&L Non - skid Ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over & incl. 15mm screed in CM1:6.Complete all as specified and as directed.

M&L Non - skid Ceramic coloured tiles 8-9 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over & incl. 15mm screed in CM1:6.Complete all as specified and as directed.

Dismantling of stone slabs and tiles of any description or thickness as on platform, shelves, floors etc laid, bedded and pointed in any mortar .Complete all as specified and as directed.

M&L 20 mm thick Granite (of any type) work (table rubbed and polished) as in steps, jambs, pillars, window- cills,cooking platforms, working table and like over 20 mm thick screed bed or bedding layer in cement mortar (1:4), including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite.Complete all as specified and as directed.

Demolition of brickwork or stone/ boulders masonry built in cement mortar or cement lime mortar incl all quoins, arches, pillars etc. but not excluding ashlar facing dressed stone work and precast concrete articles.Complete all as specified and as directed.

M&L Brick work with sub class B bricks straight or curved on plan exc. 6m mean radius built in cement mortar (1:6).Complete all as specified and as directed.

All as per Item No 80 above but except bricks.

M&L Brick work with sub class B bricks straight or curved on plan to any radius in half brick thick wall built in cement mortar (1:4).Complete all as specified and as directed.

Taking down cement or cement lime plaster on brick or stone walls etc. including racking out joints hacking for key scrubbing down with water etc.Complete all as specified and as directed.

Material and labour for rendering 15 mm thick in cement mortar (1:4) on other than fair faces of brick or concrete surfaces (5mm thick CM 1:4 with WPC setting coat and 10mm thick CM 1:4 backing coat), finished even & fair without using extra cement all as specified and directed by Engineer-in-Charge. Note :- WPC measured and paid separetely.

Supply only integral water proofing compound.

M & L for rendering 5mm thick cement plaster in cm 1:3 on ceiling including finished even and smooth without using extra cement complete all as specified and as directed.

M & L for rendering 10mm thick cement plaster in cm 1:6 on fair faces brick or concrete surfaces of wall including finished even and smooth without using extra cement complete all as specified and as directed.

M & L for preparation of new plastered surfaces of ceilings and applying three coats of white wash complete all as specified and as directed.

M & L for preparation of new plastered surfaces of walls and applying three coats of white wash complete all as specified and as directed.

Material and labour for preparation of new plastered surfaces applying 3 mm thick wall care putty and rubbing with sand paper to achieve a level and smooth to wall and applying two coats of oil bound distemper over a coat of primer on walls complete all as specified and as directed.

M & L applying two coats cement base paint on wall including preparing new plastered surface over alkali resistant primer.

M & L for preparation of old surface and applying one coat of weather coat including a coat of primer on walls/concrete surface all as specified and directed.

M&L for complete removal of existing treatment of any description and applying 3 mm thick wall care putty and rubbing with sand paper to achieve a level and smooth to wall and applying two coats of acrylic Emulsion distemper over a coat of primer complete all as specified and as directed.

Demolition of cement concrete unreinforced in ground floors and pavings n. exc. 15cm thickness (below or above ground level)

M&L PCC (1:3:6) Type C1 using 20mm graded agg as in Copping bed block hold fast complete all as specified and directed.

M&L cement concrete type B-1(1:2:4) (20 mm graded stone aggregate) 40 mm thick as in floor finished even and smooth w/o using extra cement.Complete all as specified and as directed.

M&LCement concrete 1:3:6 type C2 using 40 mm graded stone agg. as in sub floors/floors, fdn and mass filling complete all as specified.

M&L for cement concrete type c-2, 1:3:6 (40mm graded aggregate) 100mm thick as in bedding layer Finishing cement concrete all as per specified and directed

M&L 50mm thick sand cushioning for or filling under floors or in foundations including watering and consolidation all as specified and directed

M&L for machine pressed precast concrete interlocking paver block laqar finish any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 grade with grey cement & pigment with glossy finish.Complete all as specified and as directed.

S & F dual button Flush Kit for Single Piece WC .Complete all as specified and as directed.

S & F low level flushing cistern of syphonic action type 10 ltr capacity PVC fixed to wall with bracket and screwed including PVC flush pipe complete fitting including taking out unserviceable flushing cistern and flush pipe etc.Complete all as specified and as directed.

Taking down shutters of any description n exc 1 sqm each and all as directed.

All as per item No 103 above but exc 1 Sqm and n exc 2 Sqm each

Taking down chowkats or frame of any description with shutters (without taking off shutter from the frame) not exc 1.5Sqm each and removing from the site

All as per item No 105 above but exc 1.5 Sqm and not exc 4 Sqm

S&F 105X60mm size Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, holdfast etc.Complete all as specified and as directed.

S&F 125X60mm size Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, holdfast etc.Complete all as specified and as directed.

S&F Factory made 2nd class 35mm thick factory made Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated.Complete all as specified and as directed.

S&F Factory made 2nd class 35mm thick Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats

S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement etc.Complete all as specified and as directed.

S & F Small fittins such as brackets of any type latch and hinges blocks shaped door and window stops including all necessary labours articals nexc 200 cu.cm each of II nd class HW Complete all as specified and as directed.

S&F factory made solid PVC door frame of size 50x47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube complete all as specifed and as directed

S&F flush shutters 40mm thick, solid core construction, with block board core and ply wood face panels, commercial type on both sides.Complete all as specified and as directed.

S & F steel window with side hung shutters including projecting type hinges with steel handle and steel pag stay complete with glazing bars, dovetailed or welded complete all as specified and directed.

S & F steel window with side hung shutters including projecting type hinges with steel handle and steel pag stay complete without glazing bars, dovetailed or welded complete all as specified and directed.

S&F steel ventilater with top hung shutter including projecting hinges and mild steel peg stay Complete all as specified and as directed.

M&L for PCC 1:3:6 type C0 using 12.5 mm graded agg as in back filling of pressed steel frame Complete all as specified and as directed.

S&F sheet glass 4mm thick ordinary quality and glazing with oil putty in squares n exc 0.5 sqm in each pane Complete all as specified and as directed.

S&F figured glass 4mm thick pin headed type and glazing with oil putty in squares n exc 0.5sqm in each pane Complete all as specified and as directed.

S&F mild steel Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165.Complete all as specified and as directed.

S&F framed work such as grills gratings etc and similar works conforming to Fe 410-0 complete all as spd and directed

S&F aluminium anodised barrel tower bolts of extruded section 150mm long

S&F aluminium anodised barrel tower bolts of extruded section 200mm long

S&F mild steel sliding door bolts 300mm size plate type stove enamelled black with bright bolts not less than 12mm dia with and including a minimum of 6 bolts plate and nuts, four on bolts and two on staple plate in wooden shutters and welded /diveresed in steel shutters.Complete all as specified and as directed.

S&F Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) andfixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts extruded sections or cast alumiium alloy 300 mm long.Complete all as specified and as directed.

S&F butt hinges medium weightcold rolled mild steel 100mm size.Complete all as specified and as directed.

S&F 150mm long mild steel ordinary quality rat rail rod pattern spring including roller plate complete fixed to steel surfaces including necessary welding complete all as specified and directed.

S&F aluminum extruded aluminium alloy handles (fabricated type) anodised of 150mm.Complete all as specified and as directed.

M&L in repair second class hard wood plain filllets square rectangular or triangular in section clean sawn secured with nailsn. exc 6Sqcm sqm fixed.Complete all as specified and as directed.

S&F 30mm width of flaps (when open) Continuous (piano) hinges, mild steel, bright finish or electrogalvanised.Complete all as specified and as directed.

S&F in repair 18 mm thick Particle Board High Density HDMR Prelaminated Both side decorative type with decorative face veneer on one face as in cup boardcommercial type of any size fixed with screw complete all as specified and directed.

M&L preparation or new steel and iron surfaces of any description and applying two coats of synthetic enamel paint over a coat of red oxide primer.Complete all as specified and as directed.

Preparation of new wood surfaces of any description and applying two coats of synthetic enamel paint over a coat of pink primer.Complete all as specified and as directed.

S&F in repair PVC Washer for cistern of 10 ltr capacity pvc flushing cistern

S&F in repair PVC handle for cistern of cistern for 10 ltr capacity pvc flushing cistern

S&F in repair PVC float for cistern for cistern of 10 ltr capacity pvc flushing cistern

S&F in repair PVC syphon bend for cisternfor cistern of 10 ltr capacity pvc flushing cistern

S&F in repair rubber gaskit for pvc bend for packing for cistern of 10 ltr capacity pvc flushing cistern

Dismantling old water tank of capacity exc. 250 litres but not exc. 500 litres.Complete all as specified and as directed.

Dismantling old water tank and removing to store of capacity exc. 500 litres but not exc. 1000 litres.Complete all as specified and as directed.

S & F 500 ltr rotational moulded polyethylene water storage tanks three layer (cylindrical vetical with threaded closed top) hoisted and fixed in position all as specified in SSR Part - I.Complete all as specified and as directed.

S & F 1000 ltr rotational moulded polyethylene water storage tanks three layer (cylindrical vetical with threaded closed top) hoisted and fixed in position all as specified in SSR Part - I.Complete all as specified and as directed.

M & L for Disconnecting existing water tanks setting a side for repairs, cleaning of service for PVC tank by rubbing vertical wall and buttom of with bleaching powder and allowed 1/2 hour to react then washing down with water to get free from deposits and bleaching inside the tank of capacity and mouth of circulating pipes and hoisting, reconnecting, and refixing in position capacity exc. 300 and not exc. 500 Ltrs, duly printed date of cleaning complete all as specified & as directed.

M & L for Disconnecting existing water tanks setting a side for repairs, cleaning of service for PVC tank by rubbing vertical wall and buttom of with bleaching powder and allowed 1/2 hour to react then washing down with water to get free from deposits and bleaching inside the tank of capacity and mouth of circulating pipes and hoisting, reconnecting, and refixing in position capacity exc. 500 and not exc. 1000 Ltrs duly printed date of cleaning complete all as specified & as directed.

Taking down Aluminium door shutters any size and refixing in the same opening including making petty repairs as required like cleaning and repair/replacement of beadings, glazing clips, rubber gasket, stoppers, adjusting tower bolts, locks, hydraulic door closer, hinges etc and make smooth functioning with entire satisfaction of Engr-in-Charge complete all as specified and as directed Note: Replaced of any item shall be paid and measured seperately as Supply & Fix.

Taking down Aluminium window shutters any size and refixing in the same opening including making petty repairs as required incl cleaning and repair/replacement of beadings, glazing clips, stoppers, rubber beading, locks, stays, hinges etc and make smooth functioning with entire satisfaction of Engr-in-Charge complete all as specified and as directed Note: Replaced of any item shall be paid and measured seperately as Supply & Fix.

S & F for EPDM gasket complete all as spcified and as directed.

S & F for rubber neoprene packing complete all as spcified and as directed.

S & F for anodised aluminium beading/tapper clip for fixing the glass or particle board complete all as spcified and as directed.

S & F for roller for sliding window complete all as spcified and as directed.

S & f for sliding star lock for sliding window complete all as spcified and as directed.

S & F for door closer Aluminium die cast body Hydraulically regulated designation No.3 universal type suitable for door shutters of 851 to 1000 mm in width and weight between 61 to 80 kg complete all as specified and as dierected.

S&F in repair Double action floor springs hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box main of brass with stainless steel cover governing pivot made of brass other parts made of M S heavy duty

S & F brass 4-levers Mortice lock, vertical type, size 100mm coplete all as specified and directed.

S&F in repairs Floor door stopper of SS/Brass body and tongue.anodized with hard drawn steel spring fixed in floor(length of cover plate 150 mm)

S&F in repairs corner glass shelves 225mm fixed to wooden plugs with chromium plated brass screws and cup washers

S&F in repairs two way bib cock 15mm with single knob and wall flange complete all as specified and directed.

S&F stainless steel kitchen plate rack made of 1.00 mm thick sheet of size 24"x24" incl shelves, rod to put plates etc and fixed to wall complete all as specified.

S&F in repair stainless steel soap dish, any type fixed to plugs chromium plated brass screws

S&F PVC (SWR) floor trap plain with grating lincluding jointing with solvent cement 75mm dia all as specified.

S&F in repairs towel Ring round with round flange of brass chromium plated including brackets. complete all as specified and as directed.

S&F in repairs kitchen sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes, coupling including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915mmx460mm bowl size 410 mmx330mmx 160mm etc complete all as specified and as directed.

Preparing surface of sunken slab in toilet flooring and applying 15 mm thick cement plaster 1:4 cement sand mortar with integral water proofing compound both on floor and wall. including , laying and testing of bituminous coating system based on bituminous emulsion, including application of one coat of primer and laying of app membrane as per manufacturer specification in sunken portion with and including sunken floor shall be filled with brick concrete 1:4:8 as per existing thickness ,a pipe of dia 40mm 600mm long GI spout incl. fitting in floor and incl.demolition of floor complete all as specified.

M&L for Preparation and cleaning old surfaces using wire brushes/sand paper in old decorated surface of walls and applying one coat of white wash complete all as specified and directed.

All as per item No : 165 above but for ceiling surfaces.

M&L for preparation of old decorated surface of walls and applying one coat of acrylic Emulsion distemper any tint complete all as specified and as directed by Engr-in-Charge.

All as per item No : 167 above but for ceiling surfaces.

M&L for preparation of old decorated surface of walls and applying two coats of acrylic Emulsion distemper any tint complete all as specifed and as directed.

M&L for complete removal of existing treatment of any description and applying 2 mm thick wall care putty and rubbing with sand paper to achieve a level and smooth to wall and applying two coats of acrylic Emulsion distemper over a coat of primer complete all as specified and as directed.

M&L for preparation of old decorated surface of walls and applying one coat of plastic emulsion paint (internal) any tint complete all as specified and as directed by Engr-in-Charge.

M&L for preparation of old painted surfaces and applying one coat of synthetic enamel paint on wooden surfaces of any description not other wise described over 10 cm width or grith etc complete all as specifed and as directed.

M&L for preparation of old painted surfaces and applying one coat of synthetic enamel paint on steel surfaces of any description not Exc 10 cm width or grith etc complete all as specifed and as directed.

M&L for preparation of old painted surfaces and applying one coat of synthetic enamel paint on steel surfaces of any description not other wise described over 10 cm width or grith etc complete all as specifed and as directed.

M&L treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement :2 coarse sand) to match the existing floors

M&L along the external wall below concrete or masonry aron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron.

M&L at points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 litre/hole by drilling 6mm dia holes at a downward angle of 45 degree at 150mm centre to centre and sealing the same

M&L For French polishing on surfaces of any description, width or girth including cleaning and preparing the surface including a coat of wood filler on new works with two or more coats, previously polished

S & F 20mm dia 3-layer PP-R polypropylene random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc

All as per item no 179 above but 25 mm dia

Making connection of PP-R distribution branch with PP-R main of following sizes by providing and fixing tee including cutting and making fusion joint etc.Complete all as specified and as directed.

S & F in repairs 40mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, bright finished.Complete all as specified and as directed.

S & F in repairs 12mm thick Toughned glass as in hinged doors,partitions automatic doors and similar works including cutting to shape, drilling holes in SS hooks, fastners & Holding clips & 2 Nos of SS handle 300mm long in each door complete all as directed.

Dismantaling of Wall and ceiling boards (fibre,pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets.Complete all as specified and as directed.

S&F Anodised aluminium snap grid frame work for false ceiling.Complete all as specified and as directed.

S&F 4.0 mm thick Non asbestos fibre cement building boards fixed or laid/ inserted to timber/GI/Aluminium framework with screws gor fixing in 600 x 600 mm grid in ceiling flat or sloping (Frame work for ceiling shall be measured and paiid separetaly).Complete all as specified and as directed.

S & F dual button Flushing cistern dual button of any make of W.C i.e Parryware, Hindware, Cera etc.

Note:- (a) Infrastructure required in Complaint cell i.e. telephone, furmiture, stationary, transport and other necessary items/materials to establish a new complaint centre able to receive and manage complaints from the users by all means ie Manual complaint mechanism, Telephonic complaints mechanism, SMS complaint Mechanism and e-mail complaint mechanism and to maintain a consolidated list of complaints and its redressal mode indicating all its relevant data. (b) Provision and maintenance of all tools, plants, equipment and safely gear required for tradesmen under this contract (c) Provision of communication facilities to supervisor and tradesmen. (d) Provision of motorized conveyance for deployment to all tradesmen under this contract. (e) Basic inputs to be noted from the complainants will be locality, Building No, Qtr No, Name and Rank of complaint and exact nature of complaint and mobile No / telephone. fj) On lodging the complaint, the Complaint No will be assigned for reference . Also system should indicate an approximate time for repairs. Accordingly a corresponding complaint slip shall be generated by the system with all relevant info. Complaint slipshould be printed in triplicate and to be handed over immediately to Supervisor who shall detail appropriate tradesmen for repair with required materials/store. One copy of complaint shall be retained in complaint centre and two copies with tradesmen

Dilip Enterprise (BID ID -3349381)

SHARMA ENTERPRISES (BID ID -3358117)

SUMAN CONSTRUCTION (BID ID -3357272)