Construction of Auditorium Building of U.P. Sanskrit Sansthan New Hydrabad,Lucknow.(Balance work)

Amount

P/laying of wall panelling as per specification: 'Lower reach :G.I Frame work of size 600mmx600mm, infill with 1000 GSM with 50mm thick. Non woven- polypropylene the Frame work and the infill is concealed with approved 15mm Laminated MDF Pannels with 5mm Groove between the Pannels.Upper reach :G.I Frame work of size 600mmx600mm, infill with 1000 GSM with 50mm thick. Non woven- polypropylene the Frame work and the infill is concealed with 12 mm Texture Painted MDF Pannel over with 8" Long Lite weight and Free cutting with absorption coefficient NRC=.085 Polyester Fiber Panel of size & shape as per drawing. (Drawing & design shall be submit by Firm)

Providing and fixing of acoustic Door (sound proof) for auditorioum made 19 mm ply frame, infill with1000 GSM, 50 mm thick nonwoven polypropylne covered with 12 mm ply and surface finished with 4 mm thick teak veneer with melamine polish complete with all fitting, auditorium lock,and full border of same specification complete in all respect 'size - 1500 X 2550 mm

size - 2400 X 2700 mm

Providing & Laying of Color Loop Pile Carpet of Unitex Spelendor with Precision Tufted Loops Carped to be laid on 8mm. Thik PU Undertay with approved Quility synthetic adhesive as per detail

Providing & Applying Two Coat White Cement Based Wall care Putty For Given Smooth surface for Painting complete of work.

Construction of under ground sump complete in all respect as per drawing &design (Drawing& design shall be provded by contractor , drg shall be vatted by Nigam structural wing or Govt. Engg colledge

Making connection to sump with cutting of hole and C/o chamber 600x600 mm for over flow.

ELECTRICAL WORK

Supply, installation, testing and commissioning of Variable Refrigerant Flow modular type air-conditioning system suitable for Cooling & Heating both by scroll compressor controlled by inverter complete with indoor and outdoor units with individual/group wired and wireless/wired remote controller for indoor units and centralized controller, interconnecting refrigerant piping, full charge of refrigerant gas (R-410A) & oil, with initial topup of refrigrant to run the machine satisfactory .Machine will be operate upto 52C ambient temperature. Each outdoor Unit should have atleast 2 compressor and both should DC inverter end. internal control cabling and fittings etc. as per details given in specifications and having following items. The out door units shall be suitable for 3 phase 4 wire system, 415V + 10 %, 50 Hz AC supply and indoor shall be suitable for Single phase 220-240V, 50 Hz AC supply.Make -voltas ,Hitachi,bluestar'Outdoor Unit 24 HP Heat Pump Type

Supply and Instalalation of silent 125 KVA D.G. Set consists of 125 KVA 6 cylinder in line 4 stroke radiator cooled engine. coupled with 415 'V' 125 KVA mounted on a common base frame along with standard accessories i.e. residential silencer, batteries with leads, Make (kirloskar/sterling) cummins.Automatic Mains Failure (AMF) Panel.,'Base Frame with AVM pad,'Fuel Tank,'Battery with lead, 'Acoustic enclosure (Canopy ),b-Plinth for required size 4.45 x 1.45 meter & depth Base on the soil bearing capacity. As per Drawing.C-Supply and burying of 600mm x 600mm x 3mm copper plate vetically for earthing with its top at least 3 meters below ground level complete with 20mm dia G.I pipe and funnel for watering and one earthing lead of two no. 8 to 10 SWG copper wire in 15mm dia G.I. pipe up to switch board (from appron to switch board the cost of G.I. pipe and copper wire will be extra ) 30cm square C.I. Frame with hinged cover masonry housing alternate layers of charcoal/coke and salt at least 150mm thick. alround etc. as per directions of Engineer-in-charge complete in all respect. - 4 Nos. D-Supply & Laying of 32 mm x 6 mm copper Strip from earth electrode directly in the ground as required complete in all respect. E-Diesel- 100 Litre for testing.

S/F of Main Curtain- Made out of velvet curtain cloth with horizontal sliding arrangement complete with glavanished, passivated modular curtain rails, mounting brackets, suitable for sliding arrangement & motorised operation complete, with: single trolley, master trolley,tension and divertorpulliess,4mm steel wire rope, 1 HP motor crompton/ Siemens/Havells, two nos. Micro Switches for auto stop. The curtain should be drapped to half area when in closed position. Minimum overlap at centre should be 900mm and should be stitched in double gathering, Size Approximate- 10M X 6M custom Make

S/F of Rear Curtain- Made out of glazed cotton cloth with horizontal sliding arrangement complete with glavanished, passivated modular curtain rails, 1 Mtr long mounting brackets, sliding arrangement & motorised operation complete with: single trolley, master trolley,tension and divertorpulliess 4mm steel wire rope, 1 HP motor crompton/ Siemens/Havells,two nos. Micro Switches for auto stop. Minimum overlap at centre should be 600mm and should be stitched in double gathring. Size Approximate - 10M X 6M custom Make

S/F of Side Wings : Made out of 25mm X 50mm X 1.6mm rectangular tube and 6mm wood ply fixed on frame and after black glazed cotton cloth fixed,heng from ceiling by GI pipe frame size Approximate 1.2M X 5.5M custom Make

S/F of Main Frill : Suspended from 25OD Ms Pipe. Frill to be made out of the same Fabric as that of Main curtain. Frill shall be pleated the proscenium. Approximate size: 10M x 1M Custom and stitched in double gathering. Frill to be 600mm below . Custom Make

S/F of Intermediate Frills : Suspended from 25OD Ms Pipe. Frill to be made out of Black Gazed cotton frill shall be pleated and stitched in double gathering. Frill to be 600mm below the proscenium. Approximate Size 15M x 1M Custom Make

S/F of Lightbar / Set bar/Cycle: 48mm outer dia B Class GI pipe to be hung from existing grid roof structure for side wings, lightining bars, microphones bars, and scenery bars.Approximate Size: 14M. Custom Make

Master Motor Control Centre with Phase Reversal & Safety protection Motor Control Centre(MCC) suitable for operation on 3Phase & Neutral 415 V50Hz AC Supply

8Core X 1.5Sqmm Moulded Electrical Cable (control cable) Make: Polycab/ Finolex/Havells/

S/F of LED color Parlight 3in| technology ,LVSDMX mode setting, high power color changing led, with RGB color Mixing strobe and speed adjustment Make: Canara Lighting

Using 750W profile spot Light you require demer as 750 W Profile light doesn't have DMX, and it as to be controlled through Demer which is controlled pillot Controller. . Make: Canara Lighting

S/F of LED flash light, stage filler light Make: Canara Lighting

S/F of LED cyclorama BAR Light Make: Canara Lighting

S/F of LED light mixer pilot controller. Make: Canara Lighting

S/F of C clamp for lights Make: Canara Lighting

S/F of Safety chain for lights Make: Canara Lighting

S/F of Projection Screen Motorized Type 9X12 feet Make- Grand View /Legrend/Drapper

S/F of projector Ceiling mount Kit Make:custom

S/F of HDMI Matrix Auto Switcher(4k ready) 4 In +1 out and sperate audio out Make :-Kramer Model no -VS411UHD

S/F of AUX Cable -10 Mtr Make -Falcon/Impression/Purelink

3C X 2.5Sqmm Electrical Cable including 25mm PVC Conduit pipe H/D make Havells/Anchor/Polycab

2C Shielded 16 strands Cable including 25mm PVC Conduit pipe H/D Make: crsytal/BE

Boundary wall

Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-incharge.Ordinary Soil

PCC 1:4:8 Cement:Coarse sand:stone ballast 40mm size Under Floor

R.C.C. works with cement approved coarse sand and 2 cm. (3/4") gauge approved stone ballast in the proportion 1:2:4 (1cement:6aggregate) in lintels of doors and windows excluding supply of reinforcement and its bending& binding. With 24BWG binding wire including necessary centering and shuttering and also supply of all labours, tools and plants etc required for proper completion of the works. Strength of the concrete shall not be less than M-20. in Plinth Bend-In foundation

In G.Beam

In Column

40 mm Thick DPC with1:2:4 cementy :C/s: S/grit mortor

Class- 150 brick work in 1:6 cement and C.sand mortar in Foundation including (labour only) and T & P etc. required for proper completion of work.

Class- 150 brick work in 1:6 cement and C.sand mortar in Super Structure including(labour only)and T & P etc. required for proper completion of work. G.F.

Class- 150 brick work in 1:4 cement and C.sand mortar in Foundation including (labour only) and T & P etc. required for proper completion of work.

Class- 150 brick work in 1:4 cement and C.sand mortar in Super Structure including(labour only) and T & P etc. required for proper completion of work. G.F.

12/15mm wall plaster 1:6 cement :coarse sand including cost of material labour T&P etc.

Reinforcement for RCC work including straightening, cutting, bending, placing in position and binding all complete.(labour only)

12.5 % bulkage will be deduct from course sand

All rates are F.O.R. Site i/c loading unloading & stacking

Rs 55.00 per cu.m / floor for each floor above G.F. shall be paid extra on brick work

Rs 1.70 per Sq.m / floor for each floor above G.F. shall be paid extra on plaster

Materials

Course sand (Hameerpur)

Brick

Cement PPC (packed in 50 kg bag) make- Birla,Prism, ACC, Mycem,J.P.

TMT steel MS round bar confirming FE-500 I.S.I

M/s S. N & Company