Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹14.8 LAccepted-AOC | L1 | Accepted-AOC LOWEST BIDDER | |
| 2 | L2₹16.1 L+₹1.2 L (8.20%)Rejected-Finance 30 INDUSTRIAL AREA KOKAR RANCHI 834004 JHARKHAND | RANCHI | JHARKHAND | 834004 | L2 | Rejected-Finance OTHER THAN LOWEST BIDDER |
Tender Value
₹16.6 L
EMD Value
₹33,300
Closing Date
1 Aug 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (AF) Amla
GE (AF) Amla, Amla Depot Distt Betul (MP) 460553
Provision of tilling and aluminium door in building No PD 46 and other buildings in domestic area including certain minor works at AFS Amla
2023_MES_607830_1
8542/E8 of 2023-24
Open Tender
Coal Works
Item Rate
180 days
GE (AF) Amla
As per Tender Documents
8 documents required · 8 mandatory
₹500
GE (AF) Amla
₹33,300
Yes
5 Sept 2023
4 Jul 2023
7 Aug 2023
4 Jul 2023
1 Aug 2023
14 Jul 2023
Amount
M&L for Virified Ceramic tiles dark shade/ double charged/ ultra charged 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:6 Complete all as specified and directed
Ditto all as per item No. 01 but in vertical surfaces as in skirting, set and jointed in neat cement slurry & pointed in coloured cement to match the shade of tiles over and including 10mm thick rendering or backing coat in cement mortar 1:4 complete of item all as directed.
M&L for Virified Ceramic tiles light shade 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:6 Complete all as specified and directed
M & L for PVC nahani trap, plain with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) with solvent cement of dia 75mm complete all as specified and directed.
S&F PVC connections 15mm size with PTMT nuts of length 450mm fixed to pipes and valves complete all as specified and directed.
S&F vitreous china wash hand basin white flat back size 550mmx400mm excluding taps waste chain and plug and percelain stopper including two coats of synthetic enamel paint over coat of red oxide primer on exposed surfaces of breckets waste coupling brass CP 32 mm bore with long screwed shanks bedded in red lead cement and other end fixed and pillar taps 15 mm bore cast copper alloy fancy type chromium plated screwed down high pressure with long screwed shanks screwed and removing debris out of MoD land all as specified and directed.
Taking down GI tubing 15mm bore all as specified and directed by Engineer-in-Charge.
Supply and fix GI tubing 15mm bore medium grade with all fittings fixed to wall and ceiling complete all as specified and directed.
Ditto all as per item No. 08 but 20mm bore
S & F 15mm bore stop valves chromium plated screwed down,high pressure,with crutch or butterfly handle,screwed both ends for iron pipe or for unions fixed complete all as specified and directed
S&F Stainless Steel towel ringcchrome finish fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 90gms)
S&F Vitreous China Urinal Half stall type white with grating and union for descharge pipe (excluding flushing cistern ,flush pipe and waste pipe) complete including and providing and fixing plugs ,bedding against wall in C M (1:2) securing urinal to plugs with and including 60 mm long brass screws ,pointing around urinal back in cement ,fixing automatic flushing cistern with brackets ,flush pipe ,grating and union for dischargre.
S&F 15mm bore stainless steel push tap, chrome finish screwed for iron pipe and fixed, suitable for urinals, (Minimum weight 15mm-50gms)
S&F Soap dish, stainless steel, approximate size 160x 160x 90mm, fixed to plugs with chromium plated brass screws complete all as specified and directed.
S&F 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors
Rotational moulded polyethylene water storage tanks of capacity 1000 Ltrs (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I
S &F 20mm dia Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed
S &F 20mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed
S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge. (125+64+10)
S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, traight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions of Engineer-in-charge. etc. complete all as specified (115+20)
S &F Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed
S&F Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor,Overall length of cover plate 150mm
S&F door closer hydraulically regulated designation No.2 universal type,suitable for door shutters of 701 to 850 mm width and of wt 36 to 60 kg.Aluminium(Die cast)
S&F interior door chrome finish round aluminium handle of size 125mm fixed with screws complete all as specified and directed.
S&F 300mm long aluminum alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminum alloy and fix complete all as specified and directed. (3+2)
M&L for 20mm thick Granite (Z Black ) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) usng marble dust with admixture of pigment to match with shade of granite
Material for 20mm thick Granite (Z Black ) work (table rubbed and polished both sides) in steps, jambs, pillars, window-cills, cooking platforms, urinal partition and like
Fixing only Urinal partitions slabs terminating about 40cm above floor line,by embedding slab 50mm into the existing wall after necessary cutting holes into or through brick walls built in cement mortar and making good in cement mortar 1:3 and pointing in white cement (1:2) using marble dust with an admixture of pigment to match with the shade of granite complete all as specified and directed.
M&L for joint free Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match set, over and including 15mm thick screed bed or bedding layer in cement mortar 1:6 complete all as directed.
Ditto all as per item No. 31 but in vertical surfaces as in skirting, set and jointed in neat cement slurry & pointed in coloured cement to match the shade of tiles over and including 10mm thick rendering or backing coat in cement mortar 1:4 complete of item all as directed.
S&F 4 lever aluminium mortice lock ,vertical type size 100
Excavation in trenches n exc. 1.5m wide & n exc. 1.5m in depth for foundation etc. and getting out in soft / loose soil. (5.5+10+6)
M&L for PCC 1:4:8 type D-2, using 40mm graded stone agreaget as in foundation filling and mass concrete complete all as specified. (0.40+1.50.06)
M&L for Reinforced cement concrete M-25 (Design Mix) ( 20mm graded aggregate) Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs,under-reamed piles and mass concrete Complete all as specified and directed. (2+1.5+4)
M & L for RCC M-25 (Design Mix) using 20 mm graded aggas in pillers, posts struts column and stainchions etc all as specified and directed (1.25+1)
M & L for RCC M-25 (Design Mix) using 20 mm graded aggegate in Beams, cantilevers, bressummers, lintels over 1.5m span. (1.25+0.20+0.65)
M & L for RCC M-25 (Design Mix) using 20 mm graded aggegate in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like
Use and waste of Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter (16+26)
Use and waste of Formwork to sides of pillers, posts struts column and stainchions for rough finished surfaces of concrete all As specified (18+21)
Use and waste of Formwork to sides and soffits of floor or roof beams, beam haunchings girders, bressummers, lintels, cantilevers, shelves including supports overhangs, tc. also splays between floors and beam etc for rough finished surfaces of concrete all as specified (12+2.75+6)
Use and waste of Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) (25+15)
S&F TMT bars 10 mm dia and over cut to length bent to shape required including cranking, bending spirally for hooping ends and binding with MS wire (annealed) not less than 0.9 mm dia complete all as specified and as directed. (570+20+130+350)
All as item No 04 above herein but 5 mm dia and over upto 10 mm dia in stirrup (118+80+135)
M&L for 100 mm thick PCC 1:4:8 Type D-2 (40mm graded aggregate ) , as in top layer , finished fair and even complete all as directed.
M&L for glossy finished Chequered cement concrete tiles 30cm x 30cm x 25mm thick, set, jointed and pointed in neat cement slurry with grey pigment cement and pigment in floors over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed.
M&L 10mm thick rendering in cement mortar 1:6, on fair faces of brick work finished even and fair complete all as specified
M&L 5mm thick rendering in cement mortar 1:4, on fair faces of ceilings finished even and fair complete all as specified
Preparation of newly plastered surfaces of ceilings etc., and applying three coats of white wash complete all as specified
Demolition of brick work or stone masonry built in cement mortar including all quoins, arches, pillars etc and removing debris outside MD land complete all as directed. (5.5+8)
M&L 15mm thick rendering in cement mortar 1:6, on fair faces of brick work finished even and fair complete all as specified (12+35+45)
M&L two coats of oil emulsion distemper on wall newly plasterd surfaces over a coat of chalk white primer complete including prepatation of new surfaces complete all as specified and directed. (12+35+45)
Providing and applying plaster of paris putty of 1 mm thickness over plastered surface to prepare the surface even and smooth (12+35+45)
M&L for Non - skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match in coloured cement to match of lighter shade of tiles over and including 15mm thick screed bed or bedding layer in cement mortar 1:6 complete of item all as directed.
S&F Second class hard wood, Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed
S&F 40mm thick second class hardwood, Plain, framed, panelled shutters (any number of panels), with panels of timber , panels are raised and have bevelled or chamfered margins (for each side): supplied and fitted to chowkats
Cutting holes in brick walls built in cement mortar for inserting hold fast and making good dismantled portion in cement concrete 1:2:4 type B-1, depth exceeding half brick but n. exc one brick complete all as specified
S&F framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; hold fast, framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165
S&F Parliament hinges,cast brass, bright polished and fixed, Width of recess between flanges (when open) in mm 100
S& F 300mm long Brass barrel tower bolts, with cast or sheet barrel and rolled or cast bolts and fixed complete all as specified (SI marked)
S&F 150mm long Extruded brass handles, fabricated type polished
S&F 300mm long, Brass, sliding door bolt with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed
M&L for French polishing on wood surfaces of any description, width or girth including cleaning and preparing the surface including a coat of wood filler on new works with two or more coats
M&L for preparation of untreated new surfaces of steel and iron work exceeding 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer, all as specified and as directed. (5+20+2)
M & L Hardcore of guage exc 63mm but n exc. 100 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rolled/rammed to a true surface complete all as specified and directed.
Blank
M&L Fly ash brick 75 kg/cmsq compressive strength old size , is straight or curved on plan exc. 6 meter mean radius built in cement mortar 1:6 complete all as specified. (20+14)
S & F steel work ,Fe-410-W (Gde-E-250) quality-A, in roof trusses(framed) /purlins /crane gantries rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats ,gusset plates etc complete all as specified and directed. (700+300)
Providing & fixing false ceiling of module size of 595 x 595 mm in true horizontal level, suspended on interlocking metal grid of hot dipped galvanized steel sections consisting of main "T" runner with suitably spaced joints to get required length and of size 24 x 38 mm made from 0.27mm thick GI sheet, spaced at 1200 mm center to center and cross "T" of size 24 x 32 mm made of 0.27 mm thick sheet, 1200 mm long spaced between main "T" at 600 mm and center to center form a grid of 1200 x 600 mm and secondry cross "T" of length 60 mm and size 24 x 26 mm made of 0.30mm thick sheet to be interlocked at middle of the 1200 x 600 mm panel to form grid of 600 x 600 mm and wall angle of size 19 x 19 x 0.35 mm and laying false ceiling tiles of approved texture in the grid .Main "T" runners to be suspended from ceiling using 2mm dia GI hanger including 4mm thick non asbestos fibre cement building boards fixed in ceiling flat or sloping to Aluminum frame work with screws complete all as specified and directed. (42+20)
S/F pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.5 mm thick of an colour having tensile strength 550 Mpa as in roof covering /cladding to wall /roof covering fixed with self tapping screw as specified. (45+27)
M&L for 75 mm thick PCC 1:4:8 Type D-2 (40mm graded aggregate ) , as in sub base , finished fair and even complete all as directed. (40+20)
M&L for 100 mm thick PCC 1:2:4 Type B-I (20mm graded aggregate ) , as in top layer , finished fair and even complete all as directed. (40+20)
M&L PCC 1:3:6 type C1 as in plinth protection 75mm thick finished even and smooth without using extra cement complete all as specified
M & L (10+5)mm thick for rendering fair faces of brick work or Concrete surface in two coats 10mm thick in CM(1:6) as under coat 5mm thick CM (1:4) as finishing coat in two separate layer mixed with liquid water proofing compound in finishing coat only @ 200ml per bag of cement finished even and smooth without using extra cement complete all as specified and as directed. (Note: Water proofing compound shall be measured and paid seperately (35+60)
M&L two coat of cement base paint over one coat of alkali resistant primer paint including preparation of new wall surfaces complete. (35+60)
S&F for 10mm tinted Toughned glass as in hinged doors, partitions automatic doors and similar work including cutting to shape, drilling holes required.
Supply only liquid water proofing compound
S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering /cladding to wall , fixed with self tapping screws /J or L hooks as specified
S&F Pressed steel frames of size 125mm x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified,
S & F 40mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both side all as specified and directed
S & F 35mm thick 2nd class hardwood glazed and skelton shutters, open rebated and prepared to receive glass, gauze etc, but divided in to square with plain, chamfered or rounded, mitred and rebated sash bar, any number fitted with cut and mitred beads for securing glass etc, size of member of shutter as specified in SSR Part-I section 8 cluase 8.20 (a) supplied and fitted to chowkats complete.
S & F 150 mm long size extruded aluminium alloy handles, cast type anodised complete as specified (ISI) Marked
S& F 150mm long aluminium anodised barrel tower bolts of extruded section complete all as specified (SI marked)
S&F Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed.
M&L preparation of new wooden surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.
M & L for PVC concealed conduit point wiring with 1.5 sqmm nominal area stranded copper conductor PVC insulated single core cable 1100 Volts grade conforming to IS694 part-I draw in 20 mm size PVC conduit in concealed including 600 volts grade 1.5 sqmm copper stranded single core cable green color PVC insulated for continuous earthing wire with complete chess cutting, Supply and fix of 20 mm dia PVC conduit with elbow bends, couplers, tee, sunken boxes pressed steel box mounting fitting/junction boxes etc., covered the conduit with cement mortor after drawing of electric cables and making good of disturbed surfaces and match with existing sheds of wall/roof all as directed by Engineer-in-Charge for the following: -
One light point controlled by one switch
One wall mounted fan controlled by one switch
One three pin 5 Apms switch socket outlet on independent board
-ditto- all as per item No 89 herein before but point wiring with 2.50 sqmm multistrandard copper cable for 5 pin 15 Amp switch socket combination on Independent board with one run of 2.50 sqmm multisranded copper cable green colour for earth continuity conductor complete.
S & F Switch piano, flush type single pole, 5 Amp, 240 Volts AC complete.
S & F ceiling rose surface backlite 65 x 50 mm, three terminals 5 Amp, 240 volts AC.
S & F switch socket combination 2 in 1, 3 PIN, 5 and 15 flush type universal, 240 volts complete
S&F in repair for suspended type 4FT 36/40W LED fitting linear in sleek design 230 V with integral electronic driver connector block etc. complete with all accessories internally prewired including necessary mounting arrangement, provision of 2 core 0.5 sq. mm multistranded copper conductor from ceiling rose to fitting complete all as specified and directed.
Supply & Lay sub main wiring with 2 runs of 2.5 sqmm PVC insulated PVC sheathed, 1100 volt grade as per IS 694 with multistranded copper conductor in and including supply and fixing PVC conduit concealed/surface with all joint, elbow, tee, junction and Bend with necessary ches cutting and fillingwith cement mortor etc, and provision of one run of PVC insulated, multistranded copper conductor cable of size 1 run of 2.5 sqmm for earth continuty complete all as directed by Engineer-in-Charge
S & F for MCB DB VTPN 4 way double door sheet metal enclosure comprising of OEM/Manufacture specified bus bar 415 volts, 50 Hz b7us bar and nertural link suitable for MCCB incommer 7 MCBs outgoing complete including inserting in wall complete all as specified
S & F MCCBs 63 Amp 04 pole with necessary connection in DB box all as specified .
S & F MCBs 10 Amp with necessary connection in DB box
S & F single pole and natural enclosure with a two pin and earth plug and socket complete with one single pole MCB of capacity 10 to 32 A.
S & F wall mounted fan 230 Volts single phase oscillating 450mm sweep
Earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6.3 mm thick, buried directly in ground vertically (earth pit not less than 2.25 m deep below ground levl) with top edge of the earth plate not less than 1.5m below ground level, connected to GI strips of size 25 x 4 mm as earthing lead by means bolts and nuts check nuts and washers of galvanized iron and connected to main seitch board including watering arrangement with PCC chamber, MS funnel, wire mesh CI cover with frame etc including necessary excavation in any type of strata, retirning, filling removal of soil outside MD land filling of charcol and salt complete all as shown in electrical plate No 5 of MES Sch part-I connected to earthing test point all as specified and directed and testing on completion.
Note:- The amount against the Schedule of Credit mentioned in the tender document shall be deducted from the total amount quoted against Sch 'A' while deriving the Contract Sum for Acceptance.
Raj Construction
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .