Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹3.9 LAccepted-Finance | 1 | Accepted-Finance ok | |
| 2 | 2₹4.0 L+₹11,702.31 (3.00%)Accepted-Finance | 2 | Accepted-Finance ok | |
| 3 | 3₹4.3 L+₹38,312.31 (9.82%)Accepted-Finance | 3 | Accepted-Finance ok |
Tender Value
₹4.3 L
EMD Value
₹8,628
Closing Date
7 Jul 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
DFO Udhampur
DFO Office complex salian Talab Udhampur
Construction of bathroom including Sanitary fitting along with water connection and Repair of Kainthgali Check Post at Panchari Forest Range under CAMPA NPV FY 2023-24
2023_FD_218740_1
69 NIT of 2023-24
Open Tender
Civil Works
Item Wise
30 days
Kainthgali Check Post
Please refer Tender documents.
2 documents required · 2 mandatory
₹600
DFO Udhampur
₹8,628
8 Jul 2023
26 Jun 2023
8 Jul 2023
26 Jun 2023
7 Jul 2023
26 Jun 2023
26 Jun 2023 - 7 Jul 2023
Amount
Earth work in bulk excavatin by menhanical means (Hydraulic excavator ) over areas (exceeding 30cm in depth , 1.5 m in width as wel as 10sqm on plan) including disposal of excavated earth lead upto 50 mtr and lift upto 1.5m ,as directedjby Engineer-in-charge all kinds of soil complete job
Earth work in bulk excavatin by menhanical means over areas (exceeding 30cm and upto 1.5 m in depth 1.5 in width as wel as 10sqm on plan) including disposal of excavated earth upto 1mtr from cutting edge, disposed earth to be levelled and nearly dressed in all kinds of soil. complete job
Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering .All work upto plinth level with 1:5:10(1 cement :5 coarse sand : 10 graded stone aggregate 40 mm nominal size) complete job
Providing and laying in position cement concrete of specified grade including curing and excluding the cost of centring and shuttering .All work upto plinth level with 1:3:6(1 cement :3 coarse sand : 6 graded stone aggregate 40 mm nominal size)
Dumping of stones incl. supply of it complete job
Providing and laying damp proof Coarse 50mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand: 4 graded stone aggregate 20mm nominal size) and curring complete
Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curring in cement mortar (1 cement: 6 coarse sand )
Extra for brick work in superstructure above plinth level upto flor V level (By manual means)
Half brick masonary with common burnt clay (non-modular) bricks of class designation 7.5 in foundations and plinth including curring in 6.15.1 cement mortar 1:3(1 cement :3 coarse sand ) cement mortar 1:4(1 cement : 4 coarse sand)
Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement :2 coarse sand :4 stone aggregat 10 mm and down gauage), including finishing with cement mortar 1:3 (1 cement :3 fine sand) as per standard design in 75x75 mm deep chase
Providing and fixing pressed steel door/window frames conforming to IS: 4351, manufactured from commercial mild steel sheet of 1.60mm thickness , including hinges jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25 mm or base ties of 1.60mm pressed mild welded or rigidly fixed together by mechanical means , including MS pressed butt hinges 2.5mm thick with mortar guards , lock strike plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-chief fixing with adjustable lugs with split end tail to each jamb.
Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) non-decorative type core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters 30mm with ISI marked MS pressed butt hinges bright finished of required size with necessary screws complete job.
Providing and fixing 30mm wire gauze shutters using galvanized MS wire gauge of average width for aperture 1.4mm in both directions with wire of dia 0.63 mm for doors, windows and clerestory winddows with ISI marked Mspressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-chief: second class deodar wood.
Providing and fixing 30mm glazed shutters for doors, windows and clerestory windows using 4mm thick float glass panes including ISI marked MS pressed butt hinges bright finished of required size with necessary screws . In second class deodar wood
Applying priming coat:with ready mixed pink or grey primer of approved brand and manufacture on wood work/ frames / doors etc.(hard and soft wood)
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade one or more coats on old work
Supplying and fixing CI cover with frame for manhole :455x610mm rectangular CI cover (light duty) the weight of the cover to be not less than 23 kg.
Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS:15622 of approved make , laid on 20mm thick bed of cement mortar 1:4 (1cement :4 coarse sand) including poitning the joints with white cement and and matching pigment etc In all colours, shades. except white ivory ,fume red brown
Providing and fixing 1st quality ceramic glazed floor tiles conforming to IS :15622(thickness to be specified by the manufacturer) of approved make in all make inall colours, shades except burgundy , bottle green , black of any size as approved by the Engineer-in-chief in skirting risers of steps and dados over 12mm thick bed of cement Mortar 1:3(1 cement : 3 coarse sand ) and jointing with grey cement slurry@ 3.3 kg/sqm including pointing in white cement mixed with pigment of matching shade complete.
Reinforced cement concrete work in beams suspended floors , roofs having slope upto 15 degree landings , balconies , shelves ,chajjas, lintels , bands plain window sills staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement 1:1½:3 (1cement:1½ coarse sand :3 graded stone aggregate 20 mm nominal size)
Reinforcement for RCC work including staightening, cutting , bending, placing in position and building all complete.
Centering and shuttering including strutting ,propping etc and removal of form for : Suspended floors , roofs, landings, balconies and access platforms.
Centering and shuttering including strutting ,propping etc and removal of form for : Edges of slabs and breaks in floors and walls. Under 20cm wide
6mm cement plaster to ceiling of mix 1:3 (1 cement: 3 fine sand)
12 mm cement plaster of mix 1:6(1 cement: 6 fine sand ) incl. all leads lifts carriages complete job.
15mm cement plaster on the rough side fo single or half brick wall of mix 1:6 (1 cement :6 coarse sand)
Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping and sand preparing the surface smooth including necessary repairs to scratches etc. complete
Providing and applying white cement based putty of average thicknes 1mm of approved brand and manufacturer over the plastered wall surface to prepare the surface even and smooth complete.
Distempeiing with 1st quality acrylic /oil bound washable distemper (ready-made ) having VOC content less than 50 grams /litre of approved manufactre and of required shade and colour complete as per manufacturer s' specifications one or more coats on old work.
Wall painting with premium acrylic emulsion paint of interior grade, having VOC (volatile organic compound ) content less than 50 grams/literof approved brand and manufacture, ,including applying additional coats wherever to achieve even shade and colour. Two coats
Wiring for ligt point /fan pointing / exhaust fan point/call bell point with 1.5 sqmm FR PVC insulted copper conductor single core cable of L&T/rellison/plaza/havells in surface/recessed PVC pipe or conduit or casing caping, with piano type switch of Anchor /Kona, phenolic laminated sheet, suitable size wooden box and earthing the point with 1.5 sqmm FR PVC insulated copper conductor single core cable etc. as required Group B (PVC conduit or casing caping to be used of KG/BEC/Polypack /Plaza) including WAIRING/ concealed piping of 2mm/modular boxes /modular sheets and switches
Providing and fixing CP brass waste 32mm
Providing and fixing PVC waste pipe for sick or wash basin including PVC waste fittings complete semi rigid pipe
Providing and fixing 15 mm nominal bore CP brass angle valve for basin mixer and geyser points of approved make conforming to IS:8931
Providing and fixing un plasticizd PVC conection pipw with PTMT nuts collars and bush of approved quality and colour 45 cm length 15 mm nominal bore
Providing and fixing stainles steel granting 100mm dia
Providing and fixing 15 mm nominal bore CP brass bib cock of approved quality conforming to IS :8931(short nose).
Providing and fixing 15 mm nominal bore CP brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms .
Providing and fixing PTMT soap dish holder having length of 138mm bredth 102mm height of 75mm with concealed fitting arrngementss weighing not less than 106 gms
Providing and fixing PTMT shelf 440 mm long 124 mm width and 36mm height of approved quality and colour weighing not less than 300 gms
Providing and fixing PTMT towel ring trapezoidal shape 215 mm long 200 mm wide with a minimum distance of 37 mm from wall face with concealed fittings arrangements of approved quality and colour, weighing not less than 88gms
Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6mm thick hard board backing rectangular shape 453x357 mm
Providing and fixing Chlorinated Polyvinyl chloride (CPVC) pipes, having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings. This includes jointing of pipes and fitting with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-charge. Internal work Concealed fixing the pipe with clamps at 1:00 meter spacing including cutting chases and making good the wall etc.-15mm nominal outer dia pipes
Providing and fixing Chlorinated Polyvinyl chloride (CPVC) pipes, having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings. This includes jointing of pipes and fitting with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-charge. Internal work Concealed fixing the pipe with clamps at 1:00 meter spacing including cutting chases and making good the wall etc.-20mm niminal outer dia pipes.
Providing and fixing Chlorinated Polyvinyl chloride (CPVC) pipes, having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings. This includes jointing of pipes and fitting with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-charge. External work including trenching, refilling etc.-15mm nominal outer dia pipes
Providing and fixing Chlorinated Polyvinyl chloride (CPVC) pipes, having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings. This includes jointing of pipes and fitting with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-charge. External work including trenching, refilling etc.-20mm niminal outer dia pipes.
Providing and fixing on wall face un-plasticized Rigid PVC rain water pipes conforming to IS:13592 Type A including jointing with seal ring conforming to IS:5382 leaving 10mm gap for thermal expansion. Single socketed pipess.-75 mm diametre
Providing and fixing on wall face un-plasticized Rigid PVC rain water pipes conforming to IS:13592 Type A including jointing with seal ring conforming to IS:5382 leaving 10mm gap for thermal expansion. Single socketed pipess.-110 mm diametre
Providing and fixing on wall face un-plasticized-PVC moulded fittings/accessories for un plasticized Rigid PVC rain water pipes conforming to IS:13592 Type A including jointing with seal ring conforming to IS:5382 leaving 10 mm gap for thermal expansion. Coupler (110 mm dia)
Providing and fixing on wall face un-plasticized-PVC moulded fittings/accessories for un plasticized Rigid PVC rain water pipes conforming to IS:13592 Type A including jointing with seal ring conforming to IS:5382 leaving 10 mm gap for thermal expansion. Bend 87.5 75mm bend
Providing and fixing on wall face un-plasticized-PVC moulded fittings/accessories for un plasticized Rigid PVC rain water pipes conforming to IS:13592 Type A including jointing with seal ring conforming to IS:5382 leaving 10 mm gap for thermal expansion. 110 mm bend
Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diameter and weighing not less than 440 grams.
Providing and laying PVC soil waste pipe incl. bed concrete and all around, PVC pipe as per standard design of 4Kg/cm2 pressure
Providing and laying PVC plaain bends for soil waste pipes.
Providing and placing on terrace (at all floor levels) polyethylene waater storage tank ISI:12701 marked, with cover and suitable locking rrangement and making necessary holes for inlet, outlet aand overflow pipes but without fittings and the base support for tank.
Fixing of water storage tank fittings all complete.
Providing and fixing following modular switch/socket on the modular plate & switch box including connection for electric points etc as required:- 6 pin 15/16 A socket outlet 15/16 A switch complete job
Providing and fixing following modular switch/socket on the modular plate & switch box including connection for HEATING points etc as required:- 6 pin 15/16 A socket outlet 15/16 A switch complete job
Providing and fixing wash basin with C.I brackets, 15 mm C.P brass pillar taps, 32 mm C.p brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls whatever required: White Vitreous China Wash basin size 630X450 mm with a pair of 15 mm C.P brass pillare taps
Providing and fixing G.I pipes complete with G.I fittings and clamps, including cutting and making good the walls etc. 20 mm dia. Nominal bore medium.
Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 liter low level white P.V.C flushing cistern, including flush pipe with manually controlled device (handle lever), conforming to IS:7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: W.C. pan with ISI marked white solid plastic seat and lid.
Ragubir singh
Ankush Khajuria
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .