Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹1.2 CrAccepted-Finance | ₹1.2 Cr | L1 | Accepted-Finance Quoted Bid is L1 |
| 2 | L2₹1.4 CrRejected-Finance | ₹1.4 Cr | L2 | Rejected-Finance Quoted Bid is L2 |
| 3 | Rejected-Technical D 90 NATWAR NAGAR DHAULI PYAU MATHURA 281001 U P | MATHURA | MATHURA | UTTAR PRADESH | 281001 | - | - | Rejected-Technical Documents not received as per NIT |
| 4 | Rejected-Technical | - | - | Rejected-Technical Documents not as per NIT |
| 5 | Rejected-Technical GALA NO 1 GURUNANAK CHOWK SOLAPUR | SOLAPUR | SOLAPUR | MAHARASHTRA | - | - | Rejected-Technical Documents not as per NIT |
| Sl No | Description | Qty | Unit | Alaska Infratech Private Limited L2 | B.R.ANAND L1 |
|---|---|---|---|---|---|
| 1.00 | Painting of existing portal frame/steel structure with epoxy primer and polyurethane paint of approved makes at all locations, applied by airless spray machine to required DFT as per the direction of Engineer In charge. The steel surface should be cleaned by high pressure fresh water washing (minimum 3000 psi) prior to the commencement of surface preparation. Loosely adhered paint and heavy corrosion should be removed by scrapping. All rust spots to be power cleaned as per PSt3 (ISO 8501-2) and areas where paint is intact to be prepared as per PSt2 (ISO 8501-2). Any cracks in the paint shall be power tooled to upto no visible crack followed by feathering of edges. The surface should be thouroughly cleaned with water and dried before application of the paint.
Applying high build, surface tolerent epoxy primer of 200 micron DFT (in two or more coats) & High build polyurethane paint of 60 micron DFT (in one or more coat) in required colour and shade, on portal frames/steel structure upto a height of 18 mtrs from ground/floor level.
[Note:- The work is to be carried out in the city side and airside pergola of operational Terminal Building at Goa Airport. No scaffolding will be allowed for this item. The work is to be carried out using boom lift and in such a manner so as least passenger discomfort is caused. Bidders are advised to go through Technical Specification section of the tender document before quoting the rates] | 11,250 | Sqm | 690 ₹77,62,500 | 632 ₹71,10,000 Lowest |
| 2.00 | Painting of existing portal frame/steel structure with polyurethane paint of approved make , at all locations applied by airless spray machine as per the direction of Engineer In charge. The steel surface should be cleaned by high pressure fresh water washing (minimum 3000 psi) prior to the commencement of surface preparation. Loosely adhered paint and heavy corrosion should be removed by scrapping. The surface should be thouroughly cleaned with water and dried before application of the paint.
Applying High build polyurethane paint of 60 micron DFT (in one or more coat) of approved colour and shade , on portal frames/steel structure from a height of 6.00 mtr upto a height of 18 mtrs from ground/floor level.
[Note:- The work is to be carried out in the Inside/city side/airside kerb area of operational Terminal Building at Goa Airport. No scaffolding will be allowed for this item. The work is to be carried out using boom lift and in a manner so as least passenger discomfort is caused. Bidders are advised to go through Technical specification section of the tender document before quoting the rates] | 6,240 | Sqm | 510 ₹31,82,400 | 469 ₹29,26,560 Lowest |
| 3.00 | Painting of existing portal frame/steel structure with polyurethane paint of approved make , at all locations applied by airless spray machine as per the direction of Engineer In charge. The steel surface should be cleaned by high pressure fresh water washing (min 3000 psi) prior to the commencement of surface preparation. Loosely adhered paint and heavy corrosion should be removed by scrapping. The surface should be thouroughly cleaned with water and dried before application of the paint.
Applying high build polyurethane paint of 60 micron DFT (in one or more coat) in approved colour and shade , on portal frames/steel structure upto a height of 6.00 m from ground/floor level.
[Note:- The work is to be carried out in the inside/city side/airside kerb area of operational Terminal Building at Goa Airport. The work is to be carried out using trolley and/or scaffolding system and in a manner so as least passenger discomfort is caused. Bidders are advised to go through Technical specification section of the tender document before quoting the rates] | 5,390 | Sqm | 510 ₹27,48,900 | 349 ₹18,81,110 Lowest |
Tender Value
₹1.9 Cr
EMD Value
₹5.7 L
Closing Date
26 Dec 2025, 6:30 pmClosed
Senior Manager(E-C)
O/o The Airport Director, 2nd Floor Cargo Complex, Goa Airport
Repainting of Portal Frames in NITB at Goa Airport (2025-26)
2025_AAI_257380_1
AAI/Goa/Engg(C)/Repainting of portal frame/2025
Open Tender
Civil Works
Item Rate
120 days
Goa Airport
As per NIT
13 documents required · 13 mandatory
₹1,180
₹5.7 L
27 Apr 2026
3 Dec 2025
29 Dec 2025
4 Dec 2025
26 Dec 2025
4 Dec 2025
4 Dec 2025 - 11 Dec 2025
Amount
Painting of existing portal frame/steel structure with epoxy primer and polyurethane paint of approved makes at all locations, applied by airless spray machine to required DFT as per the direction of Engineer In charge. The steel surface should be cleaned by high pressure fresh water washing (minimum 3000 psi) prior to the commencement of surface preparation. Loosely adhered paint and heavy corrosion should be removed by scrapping. All rust spots to be power cleaned as per PSt3 (ISO 8501-2) and areas where paint is intact to be prepared as per PSt2 (ISO 8501-2). Any cracks in the paint shall be power tooled to upto no visible crack followed by feathering of edges. The surface should be thouroughly cleaned with water and dried before application of the paint. Applying high build, surface tolerent epoxy primer of 200 micron DFT (in two or more coats) & High build polyurethane paint of 60 micron DFT (in one or more coat) in required colour and shade, on portal frames/steel structure upto a height of 18 mtrs from ground/floor level. [Note:- The work is to be carried out in the city side and airside pergola of operational Terminal Building at Goa Airport. No scaffolding will be allowed for this item. The work is to be carried out using boom lift and in such a manner so as least passenger discomfort is caused. Bidders are advised to go through Technical Specification section of the tender document before quoting the rates]
Painting of existing portal frame/steel structure with polyurethane paint of approved make , at all locations applied by airless spray machine as per the direction of Engineer In charge. The steel surface should be cleaned by high pressure fresh water washing (minimum 3000 psi) prior to the commencement of surface preparation. Loosely adhered paint and heavy corrosion should be removed by scrapping. The surface should be thouroughly cleaned with water and dried before application of the paint. Applying High build polyurethane paint of 60 micron DFT (in one or more coat) of approved colour and shade , on portal frames/steel structure from a height of 6.00 mtr upto a height of 18 mtrs from ground/floor level. [Note:- The work is to be carried out in the Inside/city side/airside kerb area of operational Terminal Building at Goa Airport. No scaffolding will be allowed for this item. The work is to be carried out using boom lift and in a manner so as least passenger discomfort is caused. Bidders are advised to go through Technical specification section of the tender document before quoting the rates]
Painting of existing portal frame/steel structure with polyurethane paint of approved make , at all locations applied by airless spray machine as per the direction of Engineer In charge. The steel surface should be cleaned by high pressure fresh water washing (min 3000 psi) prior to the commencement of surface preparation. Loosely adhered paint and heavy corrosion should be removed by scrapping. The surface should be thouroughly cleaned with water and dried before application of the paint. Applying high build polyurethane paint of 60 micron DFT (in one or more coat) in approved colour and shade , on portal frames/steel structure upto a height of 6.00 m from ground/floor level. [Note:- The work is to be carried out in the inside/city side/airside kerb area of operational Terminal Building at Goa Airport. The work is to be carried out using trolley and/or scaffolding system and in a manner so as least passenger discomfort is caused. Bidders are advised to go through Technical specification section of the tender document before quoting the rates]
Alaska Infratech Private Limited (BID ID -949730)
stage.html
html • 0.04 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Document
0.62 MB
Tender Documents
Tender Documents • 35.81 MB
BOQ
BOQ • 0.26 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].