Regional Forest Officer, NBP Jaipur for repair and maintenance works

BSR Item 12.38 Distempering with 1st quality acrylic washable distemper (ready mixed) of approved manufacturer and of required shade and colour completeincluding all scaffolding as per manufacturer's specification. Two or more coats on new work including prepartion of base with primer, putty, lippy etc complete in all respect.

BSR Item 13.1 Repairs to plaster of thickness 12mm to 20mm in patches of area 2.5 sq. metres and under including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50 m lead With cement mortar 1 :4 ( 1 cement : 4 coarse sand)

BSR Item 1.4 P & F European type white glazed vitreous china 1st quality Double syphonic W.C (IS :2556 Mark) with P or S trap including cutting and making good the wall and floor

BSR Item 1.5 P & F Universal (anglo-Indian type) white glazed vitreous china W.C. pan 1st quality (IS 2556 Marked ) with P or S trap including cutting and making good the wall and floor.

BSR Item 1.8 P & F C.P. lugs for tilet seat cover

BSR Item 1.14 P& F lst quality WVC Urinal (IS:2556mark)with25mmdia G.I. waste pipe, dome waste couplings, concealed iron brackets or screws etc complete.

BSR Item 1.14.2 Flat Back (large) or half stall size 610x400x80mm.

BSR Item 1.15 P & F W.V.C. Urinal Partition Plate of approved standard make of size 630x315mm including making good the wall

BSR Item 1.2 P & F Low level Flushing Cistern of 10 litres capacity (IS : 2556 mark) of approved make with complete fittings C.I. brackets duly painted, brass ball cock with ball (IS: 1703 mark) complete including cutting and making good the wall:

BSR Item 1.20.1 WVC with C.P. brass bend.

BSR Item 1.22 P&F Flush Pipe of approve dmake with complete fittings for high level flushing cistern

BSR Item 1.22.3 PVC exposed (heavy) 32mm.

BSR Item 1.28 P&F C.P. brass Urinal Flush Pipe set complete with flanged brackets of approved make

BSR Item 1.28.1 For 4 Urinals

BSR Item 1.35 P & F C.P. Brass flush Valve with C.P. flush bend of approved make. Push type with Elbow 32 mm dia

BSR Item 1.36 P & F WVC Wash basin (Ist quality IS:2556 Mark) of approved make with C.I. brackets duly painted 1 No. 15 mm C.P. Pillar cock (IS:8934 Mark) & 32 mm C.P. brass waste coupling of approved make, P.V.C Waste pipe with PVC nut 32 mm complete including cutting & making good the wall :

BSR Item 1.43 P & F waste pipe with all fitting

BSR Item 1.43.1 P.V.C with C.P nut 32mm

BSR Item 1.43.3 P.V.C with C.P nut 40 mm dia

BSR Item 1.59

BSR Item 2.3 Making connection of G.I.distribution branch withG.I.main including all fitting

BSR Item 2.3.1 Upto 25mm dia

BSR Item 2.6 P&F PilllarCocks(IS:8931:1993Mark)of superior quality and approved make:

BSR Item 2.6 C.P. Pillar cock, 15 mm dia nominal bore

BSR Item 2.12 P&F Inlet Connection (AngleValves)Superiorquality, of approved make, for Wash basin, Gyser etc.

BSR Item 2.12.1 C.P. Inlet connection 15mm.Brass (IS : 8931 marked

Bsr Item 1.9 Labour charges for removing W.C.pan(anytype) of all sizes with care including all necessary fittings P or S trap

PWD/Ch B-16 item 16.1 Providing and fixing aluminum work for doors ,windows, ventilators and partition with extruded built up standard tubular / appropriate Z sections and other sections of approved make conforming to IS :733 and IS :1285, fixed with rawl plugs and screws or with fixing clips ,or with expansion hold fasteners including necessary filling up of gap. at junctions , at top ,bottom and sides with required PVC/neoprene felt etc. Aluminium section shall be smooth ,rust free, straight ,mitered and jointed mechanically wherever required including cleat angle Aluminium snap beading for glazing /paneling , C.P. brass/ stainless steel screws Al. Tower bolt & Al. handle & Al. Aldrop etc.,all complete as per architectural drawings and the directions of Engineer- in– charge .(Glazing and paneling to be paid for separately).

PWD 16.1.1 For Fixed portion

PWD 16.1.2 For shutters builtup standard tubular sections of openable doors ,windows & ventilators including providing & fixing hinges / rollers etc. and making provision for fixing of fittings wherever required (lockes shall be paid for separately).

Bsr Item 16.1.2.3 Polyester Powder coating aluminum ( minimum thickness of powder coating 50 micron)

PWD 16.59 Providing & Fixing Aluminium composite panel of indo bond/euro/flexi bond of equivalent made 3mm that with 0.5mm thick skin& PVDF coated of approved shads for toilet door in double layer in Aluminium frame complete in all respect as per sample approved by Engineer in Charges.

PWD 14.23.1 Dismantling tile work in floors and roofs laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 meter lead: For thickness of tiles 10mm to 25mm

PWD 7.22.1 P & F 1st qualityHeavy Duty Vitrified Polished Digital tileson floor, skirting and steps etc.in different sizes (thickness minimum 10mm) with water absortion less than or equal 0.08% and conforming to IS 15622 of approved make in all colour and shade, laid with 20 mm thick CM 1: 4 including grounting the joints with white cement and matching pigment etc complete.

Bsr Item 10.21 Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations. (a) Applying and grouting a slurry coat of neat cement using 2.75 kg/sqm. of cement admixed with proprietary water proofing compound conforming to IS. 2645 over the RCC slab including cleaning the surface before treatment. (b) Laying cement concrete using broken bricks/brick bats 25 mm to 100mm size with 50% of cement mortar 1:4 (1 cement : 4 coarse sand) admixed with proprietary water proofing compound conforming to IS : 2645 over 20 mm thick layer of cement mortar of mix 1:4 (1 cement :4 coarse sand ) admixed with proprietary water proofing compound conforming to IS : 2645 to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs.

Bsr Item 13.1 Repairs to plaster of thickness 12mm to 20mm in patches of area 2.5 sq. metres and under including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50 m lead With cement mortar1 :4 ( 1 cement : 4 coarse sand)

BSR Item 12.64 Providing and applying superior quality emulsion for wall painting with Velvet touch/Royal paint etc of approved brand and manufacture to give an even shade with putty and preparation of surface applying with the help of paint roller the work complete in all respect as per direction of Engineer-in charge.

BSR Item 12.64.1 New work three or more coat

BSR Item 12.37.3 Removing dry or oil bound distemper by scrapping sand papering and preparing surface smooth including necessary repairs to scratches by sandla/loi and all scaffolding (forcolour changing only)

BSR Item 7.5 Providingand fixingGranite stone slabmirror polishedand machine edge cut in walls, pillars, steps, Shelves, Sills Counters,Floorsetc.laidon12mm(Av.) thickbaseofcement mortar 1:3 (1 cement : 3 coarse sand) jointingwithwhite cement mortar 1:2 (1white cement : 2marble dust) withpigment tomatch the shade of themarble slab including grinding, rubbing and polishing complete

BSR Item 7.5.1 Jhunjhunu/Jalore (Red/Choclate/Black/Pink Colour)

BSR Item 6.17.1 Supplying and fixing in walls machine cut and polished stone shelves, tands and in CM 1:3 with machine cut edges :

BSR Item 7.6.2.1 Extra for providing edge moulding to 15-18mm thick marble/ Granite/Kota stone counters, Vanities etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge.

BSR Item 11.18 Kota stone slab flooring 25 mm thick over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand)

BSR Item 3.27.3 Construction of septic Tank in all types of soil with 40 Cm.thick masonry in CM 1:6, 15 Cm thick C.C bed of 1:5:10, M 15 grade C.C floor & RCC slab covering with M15 grade c.c. floor, 50 mm thick stone slab partition walls, 20 mm thick plaster in CM 1:6 finished with neat floating cement, 4 Nos stone foot rests of approved design ,two No. 450 mm dia each Ferro cement cover with frame, earth work etc. complete as per approved drawing including disposal of surplus earth within a lead of 50 mtr:- Size 400 x140x150 cm.(for 50 users) with 115 mm thick RC (M-20) slab with Tor steel reinforcement 10mm ϕ @15 cm c/c bothways including shuttering complete in all respect.

BSR Item 3.16.5.1 Providing &Laying C.C. 1:3:6 (Stone Agreegate 20mm nominalsize)all around PVC Pipe including7.5cm thickbe concerte [Width&Height = Dia of Pipe inCM+15CM] excluding cost of Pipe & Excavation of trenches etc.PVC pipe 110 mm dia

BSR Item 1.38.9.3 P & F Kitchen & Lab. Sink of approved make with C.I.brackets duly painted, 40 mm C.P. waste coupling, C.P. Brass chain with rubber plug, 40 mm G.I. waste pipe up-to floor level complete including cutting and making good the wall & floor :