Renovation of Room no. 62, for Radiobiology Lab,FF,Proton Centre, ACTREC

Amount

CIVIL WORKS + LAB FURNITURE

ALUMINUM PARTITION WORK ANODIZED-FULLY GLAZED/PARTLY GLAZED Providing & fixing alumimium partition to the required height partly glazed and partly panneled or fully glazed o r fully panneled using aluminium section of jindal 2425 satin finish anodizing of required size for bottom, top, middle & vertical rails at required intervals panneling with 12mm thick Novapan or ancholam both side pre-laminatd board fixed with sloping aluminium beeding alround with neoprine gasket glazing with 5.5mm forsted/ bajri/ plain glass of approved make like fixed with alumimium channel beeding two way PVC lining/ rubber gasket to ensure water tightness and Nos rattaling including providinG necessary cover mould using suitable alumimium section so as to take care of gaps between the walls/ ceiling / flooring and partitions etc. including providing and fixing necessary fittings as specified and directed.

ALUMINIUM SHUTTER ANODIZED-FULLY GLAZED/PARTLY GLAZED Providing fixing door frame & shutter side hung to consist of partly glazed partly panneled/ fully panneled/ fully glazed with 5.5mm thick glass sheet of approved make and qualit y plain or frosted of bajri glass of approved make like fixed with two WAY PVC lining/rubber gasket to ensure Nostes tightness and Nos rattaling and panneling with 12mm thick Nosva pan or Ancholam finished on both side as required using extruded alumimium section for shutter frame jindal 2425 45 45mm satin finish anodized including P/F push-pull plates handles & of approved make & heavy duty fittings like tower bolts of make Motice lock of locks with keys hinges of 5 inch or 6 inch as per requirement hydraulic door closer/ floor spring of make of suitable capacity etc. complete as specified and directed.

Providing & laying poly vinyl chloride (PVC) rolls flooring of 2mm thick manufactured of approved make and approved pattern for flooring, skirting/dado laid on existing cement tile or concrete of plastered floor finish with suitable adhesive as per manufacturers specifications close jointed and finished to proper bends, slopes and plumbs as directed etc. complete generally as per manufacturer’s specifications. to match exisitng flooring pattern of building.

Providing and fixing tiled false ceiling of approved materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main “T” runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross “T” of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main “T” at 600 mm center to center to form a grid of 1200x600 mm and secondary cross “T” of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main “T” runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge.GI Metal Ceiling Lay in plain Tegular edge Global white color tiles of size 595x595 mm, and 0.5 mm thick with 8 mm drop; made of Aluminum sheet having electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending.

Providing and fixing Aluminium Composite Panel (ACP) curtain wall system of 4mm thick matching existing ACP Panel or approved colour and make fixing over aluminium frame of 50mm x 25mm thick in grid form including cutting bending, ACP to required size and shape, fixing on Aluminium frame with weather Silicon sealant and finishing the groove with black colour sealant as per manufacturer’s specification complete all inclusive of any strucutral steel support required for frame, wastage, labour, shifting, transportation etc. as directed and instructed by Engineer incharge. for trap door etc

Providing and fixing sun control films 1.5 mil thick film on window glasess without damaging rubber gaskets, handle , friction hinged etc complete including neccesary scafolding job is to be complited as per garware film specification and as directed by EIC

Providing & fiXing in positon wooden chemical reagenct shelves finished with fully lamnated shelves made out of 18/19mmthick commercial ply of standar dimentsion and size in 2 & 3 tire as per user requirement complete as directed and instructed.

SITC of fully laminated of approved colour and shade wodden cabinet made out of 18/19mm thick commercial playwood with openable shuters with glass opening, on hinges with handle and lock arrangement fixed on wall with powder coated wall bracket to support complete as directed and instucted.

LAMINATE Removal & refising new approved laminate with the adhesive making the surface smooth & providing & fixing new approved of required specification & colour etc. complete as specified & directed including fevicol, nails etc. complete.

GRANITE: Providing and fixing 18mm thick gang saw cut mirror polished premoulded and prepolished) machine cut over wooden table with empxy adhesive with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.

Providing & Applying Luster paint to wall two coats of primer & thereafter two coats of paint as mentioned below of approved make First quality to the required colour scheme and as per manufacturers instructions / specifications to the walls, beams, columns, ceilings, partitions doors etc. including thoroughly scrapping the existing surface with sand papers, removing old paint, filling up crevices and Applying and Levelling the existing surface with White Cement based / Coloured waterproof Putti/POP Coat of average thickness of 1 mm or 2 mm as per requirements of approved brands necessary to obtain smooth surface, filling of cracks, removal of stains, painting spots on floors,aluminium window frame & glassetc including scaffolding etc as to the entire satisfaction of engineer in charge.

ELECTRICAL + LV SYSTEM

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable including surface/ recessed medium class PVC conduit as required. 2 X 4 sq. mm + 1 X 4 sq. mm earth wire FOR POWER POINTS

SITC of 1.25Inch(Composite) casing casing capping

Supplying and fixing following size/ modules, PVC / GI box alongwith modular base & cover plate for modular switches in recess / surface etc. as required. • All the power socket tagging to be provided , PVC tags to be provided. civil work required for conceled installation of power sockets , electrical conduicts etc. is in the scope of agency including complete finishing and final painting • All the power sockets inside and power panel inside wiring ferruling to be done as instructed by EIC ES

3 Module

6 Module

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.

Modular switch 6A/16A

Modular Socket 6A/16A

SITC of CAT 6 LAN cable for DATA including 25mm PVC Conduit Supply ,Installation,Testing & Commisioning of of UTP 23 AWG 4 pair CAT 6 LAN Cable to TIA/ EIA 568 B.2.1.in the surface/ recessed steel/ PVC conduit as required. For telephone

SITC of 25 mm PVC Conduit pipe including all type of fixing accessories HMS type

SITC of Cat 6 type I/O with RJ 45 socket with Box, faceplate and fixing screws, having the compliance/certifications for ISO 9001:2015 & ROHS

Supplying and fixing following ratings 240/415 volts, “C” curve, miniature circuit breaker suitable for inductive load of following poles including metal enclosure box , earthing and fixing accessories with connections,Testing and commissioning etc. as required. As per technical specifications in tender. for concealed or surface installed as approved by EIC ES

Supplying, erecting & marking DP MCB C-series with rated short - circuit breaking capacity (Icn) 10kA 16 Amp to 32 Amps DP MCB C Curve + Earth including metal enclosure box

Supply ,Installation,Testing & Commisioning of LED shaped 36 Watt 2ft x 2ft Premium Range Recessed Downlighter having pressure die-cast aluminimum housing with white front bottom frame suitable to following features. LED fixture to be fixed surface of concealed as per site requirement. - Luminaires suitable to Aluminium metal grid ceiling or Gypsum or POP, -Minimum System Lumen output 1800 lumens -In built electronic LED pre wired driver, -Luminaire shall be with special translucent --High Surge Protection:-2.5kV. -High diffuser>85%, -Provision of Spring loaded Mounting clips. -Opal Translucent cover/Poly Carbonate reflector. -CRI>80,THD<10%. -High Efficacy gretaer than or equal to 100 lm/watt, -Provide Uniform low glare lighting non yellowing/PMMA lens for better light distribution, -Operatable voltage - 220-240 V,50 Hz, PF>0.9, -Colour Temperature gretaer than or equal to 4000K to 5000K LED concealed square type / round type , seemless, high efficiency and premium range as per technical specification directed by OIC - ES

SITC of Primary point wiring for light point/ fan point/ exhaust fan point/ call bell point with 2 x 1.5sqmm + 1 x 1.5sqmm FRLS PVC insulated copper conductor single core cable in surface / recessed including medium class PVC conduit Heavy(HMS) / casing capping , with modular switch , modular plate, suitable GI box for concealled , suitable PVC box for surface , ceiling fan rose , PVC junction box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.

SITC Secondary point wiring light to light looping with 2 x 1.5sqmm + 1 x 1.5sqmm FRLS PVC insulated copper conductor single core cable in surface / recessed including medium class PVC conduit Heavy(HMS) / casing capping , with modular switch, modular plate, suitable GI box for concealled , suitable PVC box for surface , ceiling fan rose , PVC junction box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.

SITC of UV Light 4 feet

HVAC SYSTEM

Supply,Installation, Testing & commissioning of Split Air Conditioner (Hi-wall type) of 2.0 ton capacity as per below specifications including box accessoris i.e copper pipe, cable, remote, drain pipe etc. Capacity: 2.0 ton ( min cap 1.8 TR) Technology: Inverter Type Power Supply: Single phase, 230 V, 50 Hz BEE star rating: 5 star Cooling Technology: Cooling Only Cooling Coil Material: Copper Condenser Coil Material : Copper Refrigerant: R-32 or eco-friendly Gas

Supply, Installation, testing & Commissioning of Copper pipe 1/2", 1/4" or as per OEM recommendation size with insulation sleeve. Note: Copper pipe shall be measure in pair (Liquid and Gas line) . Wall cutout/core cutting and repacking of hole is in the scope of vendor.

Supply, Installation, Testing & commissioning of 4Cx2.5sqmm flexible coppper cable for power & control wiring

Supply, fixing of 100 to 150mm width casing capping for piping and cabling as per instruction by EIC.

Suply, installation, Testing & commissioning of PVC drain pipe 25 mm with insulation and fittings & accessories required for complete installation

Supply, installation of MS outdoor stand (table top/wall mounted) as instructed by EIC

Supply, Installation, Testing & Commissioning of a high-quality, compact, and efficient 6-12 LPH Mini Condensate drain pump suitable for a split air conditioning system. The pump shall be capable of automatically removing condensate water from the indoor unit and discharging it to the designated drainage point.

Necessary modification in existing ducting i.e blank off, reroute etc with all accessories insulation, damper, diffuser, etc in N-061 & N-062

S R DEVELOPERS (BID ID -3241444)

arcoma (BID ID -3240515)