REPAIR OF JOINERY, SANITARY FITTINGS, PLUMBING AND WATER SUPPLY OF BLDGS MD AND OTM ACCN AND PETTY REPAIRS FOR DAY TO DAY SERVICES AT JINDRAH UNDER GE (ARMY) DHAR ROAD

Amount

Taking down old unserviceable shutters of any description exc 1 Sqm and not exceeding 2 Sqm each complete all as specified and directed.

Taking down old unserviceable shutters of any description exceeding 2 Sqm each complete all as specified and directed.

Taking down old unserviceable chowkats or frames with shutters (without taking off shutters from frames) area not exceeding 1.50 sqm each and removing away complete all as specified and directed.

Taking down old unserviceable chowkats or frames with shutters (without taking off shutters from frames) area exceeding 1.50 square metre and not exceeding 4.0 square metre each and removing away complete all as specified and directed.

S&F pressed steel frames of size 125x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate incl filling hollow of frame with plain cement concrete type B0 (1:3:6 )(using 12.5mm graded aggregate complete all as specified and directed.

S&F factory made, 35mm thick 2nd class hard wood, plain framed, panelled shutters (two panels) with lock rail and panel of 9 mm BWP commercial ply or 12 mm veneered particle board with commercial veneering on both sides, the side of rail and stile as per IS-1003 (Part-I), kiln seasoned and chemically pressure treated, complete all as specified and directed by Engineer-in-Charge.

S&F factory made, 2nd class hard wood,35mm thick glazed and skeleton shutters, open rebated and prepared to receive glass / gauge etc. (without sash bars) edges or framing plain, chamfered or rounded fitted with cut or mitered beads and with muntins for securing glass etc. size of members of shutters as specified in SSR Part - I section 8.20 (a), complete all as specified and directed.

Factory made solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with mild steel square tube, supplying and fixing in opening as per specification and drawing on Page No 160 MES SSR-2010 Part-II, complete all as specified and directed by the Engineer- in-Charge.

Factory made solid panel PVC door shutter 30 mm thick ( style ) consisting of frame made out of mild steel tubes for top and bottom rails . Mild steel frame shall be covered with heat moulded plain cover PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail , lock rail and bottom rail on either side and gap insert for top rail and bottom rail ; Paneling of plain colour PVC sheet to be fitted in the mild steel frame welded /sealed to the stiles and rails with suitable PVC sheet beading, and joined together with solvent cement supplying and fixing in the frame at site as per specification clause No 8B.1 to 8.B.10 and drawing on page No 156 of MES SSR-2020 Part-II complete all as specified and directed.

Treating small articles such as stops, covers, hold fast etc area not exceeding 0.1Sqm each and treated with tar, coal tar or black paint complete all as specified and directed by the Engineer- in-Charge.

M&L PCC 1:3:6, type C-1 using 20mm graded crushed stone aggregate as in block for hold fasts, cill, steps, bed plates and like including weathering, slightly rounded or chamfered angle and throating and including necessary form work for fair finished surfaces of concrete complete all as specified and directed.

S&F factory made steel window with side hung shutters including projected type hinges with steel handle and steel peg stay with glazing bars, dovetailed or welded complete all as specified and directed.

S&F factory made steel window with side hung shutters including projected type hinges with steel handle and steel peg stay without glazing bars, dovetailed or welded complete all as specified and directed.

S&F factory made steel ventilators with top hung shutters including hinges, steel peg stay with glazing pin complete all as specified and directed.

Mild steel framed work such as in grills, gratings, etc. with ends of bars shouldered and/or riveted or forged into spikes, framed guard bar; barred iron doors; ladder; framed balusters; railing; frame work for water tanks and similar work conforming to Fe 290 Gde-E-165 complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from metal/wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads including punching or drilling out old glazing pins/spring clips and providing and fixing new ones and glazing with oil putty in square/rectangular not exc. 0.5 sqm complete all as specified and directed.

S&F sheet glass ordinary quality and glazing with oil putty in square n. exc 0.50 Sqm in each pane, 3mm thick complete all as specified and directed.

Fixing only Sheet glass ordinary quality and glazing with oil putty in square n. exc 0.50 Sqm in each pane, 3mm thick complete all as specified and directed.

S&F sheet glass pin headed, glazing with oil putty in square n. exc 0.50 Sqm in each pane, 4mm thick complete all as specified and directed.

S&F galvanised mild steel wire cloth having 0.56 mm nominal dia of wire and average width of aperture 1.18 mm fixed with tinned tacks or galvanised wire staple complete all as specified and directed.

S&F in repair Galvanised mild steel wire cloth having 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanised staples complete all as specified and directed.

Preparation of new wooden or wood based surfaces exceeding 10 cms width or girth and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and directed.

Preparation of new steel and iron surfaces exceeding 10 cms width or girth and applying two coats of synthetic enamel paint over one coat of red oxide zinc chrome primer,complete all as specified and directed.

S&F aluminium handles cast type, anodised, 150 mm size complete all as specified and directed.

S&F in repair Aluminium handles cast type, anodised, 150 mm size complete all as specified and directed.

S&F aluminium handles cast type, anodised, 100 mm size complete all as specified and directed.

S&F aluminium anodised barrel tower bolts of extruded section with 200 mm long bolt, complete all as specified and directed.

S&F in repair Aluminium anodised barrel tower bolts of extruded section with 200 mm long bolt, complete all as specified and directed.

S&F aluminium anodised barrel tower bolts of extruded section with 100 mm long bolt, complete all as specified and directed.

S&F aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, 300mm long complete all as specified and directed.

S&F in repair Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, 300mm long complete all as specified and directed.

S&F MS butt hinges 100mm long medium weight cold rolled mild steel etc complete all as specified and directed.

MS butt hinges fix in repair 100mm long medium weight cold rolled mild steel etc complete all as specified and directed.

S&F MS butt hinges 75mm long medium weight cold rolled mild steel etc complete all as specified and directed.

Cleaning and removing all scale and dirt etc from water tanks and from mouth of circulating pipe etc of capacity exc 250 and not exceeding 500 ltrs and finally washing with solution of water and bleaching powder complete all as specified and directed.

Cleaning and removing all scale and dirt etc from water tanks and from mouth of circulating pipe etc of capacity exc 500 and not exceeding 1000 ltrsand finally washing with solution of water and bleaching powder complete all as specified and directed.

S&F ball valve, high pressure with PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe or fixed of size 20 mm bore,(Min Wt 20mm- 210 gms) complete all as specified and directed.

Ball valve fix in repair , high pressure with PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe or fixed of size 20 mm bore,(Min Wt 20mm- 210 gms) complete all as specified and directed.

S&F in repair Bib taps,cast copper alloy with crutch or butterfly handle screwed down for iron pipe or for brass ferrule and fixed for bore of pipe 15 mm,complete all as specified and directed.

S&F in repair Bib tap,cast copper alloy,chromium plated with crutch or butterfly handle screwed down for iron pipe or for brass ferrule and fixed for bore of pipe 15 mm,complete all as specified and directed.

S&F in repair Bib taps, fancy type,chromium plated with crutch or butterfly handle screwed down for iron pipe or for brass ferrule and fixed for bore of pipe 15 mm,complete all as specified and directed.

S&F in repair Angle valves /Stop valve 15mm bore dia or pipe, cast copper alloy, chormium plated screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S&F in repairs 15 mm bore dia fancy type, stop valves, chromium plated, cast copper alloy, screwed down, high pressure, with long shank and cup, crutch or butterfly handle, screwed both ends for iron pipe or for unions fixed complete all as specified and directed

S&F in repair Pillar taps, cast copper alloy, with capstan heads , chromium plated, screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe of bore 15 mm , complete all as specified and directed.

S&F in repair Pillar taps,fancy type, cast copper alloy, with capstan heads , chromium plated, screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe of bore 15 mm , complete all as specified and directed.

Taking up or down steel tubing with connections for cleaning for refixing or removing to store yard complete of bore 15mm, complete all as specified and directed.

Taking up or down steel tubing with connections for cleaning for refixing or removing to store yard complete of bore 20mm, complete all as specified and directed.

S&F 20mm bore steel water tubing medium grade galvanised with all fittings such as elbows,tee,socket,bends,nipple,union including short lengths, fixed to walls and ceiling or laid in floor complete all as specified and directed.

S&F 15mm bore steel water tubing medium grade galvanised with all fittings such as elbows,tee,socket,bends,nipple,union including short lengths, fixed to walls, and ceiling or laid in floor complete all as specified and directed.

S&F in repair PVC (Plastic polymer Cistern) valve less, Symphonic action type, flushing cistern of capacity 10 liters, low level, white with inlet, ball valve, manually operated with one PVC ball valve horizontal plunger type including provision of 32mm PVC flush pipe of required length and making connections complete all as specified and directed.

S&F in repair Vitreous china squatting pan of pattern Orissa Pattern of size 580x 440 mm white with ‘P’ or ‘S’ trap , front or back inlet but excluding flushing cistern and flush pipe fixed in repair including placing in position in floor and embedded in cushion of PCC 1:7:12 type E-1 and finishing the top surfaces to match with the existing flooring complete all as specified and directed.

S&F in repair of Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) white including PVC P or S trap, complete all as specified and directed.

S&F 100 mm bore of cast iron pipe trap'P' or 'S' type complete all as specified and directed.

S&F Viterous china urinal bowl (white) flat back of size 465x355x265mm including fixing plug, discharge pipe, brackets, flush pipe etc fixed to wall complete all as specified.

S&F in repair Brass chromium plated shower rose 125 mm size with or without swivel joints, any size including fixing to steel pipe or union complete all as specified and directed.

S&F in repair Tubular Towel rail 20mm dia, D type, 60cm long between flanges of brass chromium plated fixed with and including chromium plated brass screws and wooden / plastic cleats complete all as specified and directed.

S&F in repair Glass Shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with and including chromium plated bracket guard and railing 60cm long fixed with brass screws and wooden/plastic cleats complete all as specified and directed.

S&F in repair vitreous china wash basin white flat back size 550 x 400 including brackets, including cutting for and pinning in ends of bracket or erecting stand, fixing of waste pipe etc complete all as specified and directed.

S&F in repair PVC connections 15 mm size with PTMT nuts of length 450 mm long complete all as specified and directed.

S&F PVC connections 15 mm size with PTMT nuts of length 450 mm long complete all as specified and directed.

S&F in repair sink with drainage board made of stainless steel 1mm thick for kitchen with plugs washers and wastes including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 495 mm x 420mm bowl size 410mm x 330mm x 160mm including waste pipe and waste coupling etc complete all as specified and directed.

S&F in repair sink with drainage board made of stainless steel 1mm thick for kitchen with plugs washers and wastes including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915 mm x 460mm bowl size 410mm x 330mm x 160mm including waste pipe and waste coupling etc complete all as specified and directed.

S&F PTMT grating doom 100mm dia, (min wt 25gms) complete all as specified and directed.

S&F in repair PTMT grating doom 100mm dia, (min wt 25gms) complete all as specified and directed.

S&F Harrison rail (curtain rod)18-20mm dia, mild steel chromium plated with fixing brackets, stops, rollers etc, complete all as specified and directed.

S&F in repair 32mm waste fittings, brass, chromium plated for glazed ware sink, basin etc with long screwed shanks and fly nuts flange ende bedded in red lead cement and other end fixed complete all as specified and directed.

S&F in repair 40mm waste fittings, brass, chromium plated for glazed ware sink, basin etc with long screwed shanks and fly nuts flange ende bedded in red lead cement and other end fixed complete all as specified and directed.

S&F flush pipe of polyethylene of polyethylene of low or high density of PVC 32mm dia for low level flushing cistern to pedestal pattern closet including all joints complete all as specified and directed.

S&F flush pipe of polyethylene of polyethylene of low or high density of PVC 32mm dia for low level flushing cistern to pedestal pattern closet including all joints and making good to floor complete all as specified and directed.

S&F in repair wall mixer , chromium plated 15mm for mixing hot and water, screwed down for iron pipe and fixied complete all as specified and directed.

S&F in repair wall mixer , chromium plated 20mm for mixing hot and water, screwed down for iron pipe and fixied complete all as specified and directed.

Dismantling existing unserviceable PVC water tank of capacity exc 250 and not exceeding 500 ltrs and removing from site complete all as specified and directed.

Dismantling existing unserviceable PVC water tank of capacity exc 500 and not exceeding 1000 ltrs and removing from site complete all as specified and directed.

S&F rotational moulded polyethylene water storage tanks, three layered , ISI marked (cylindrical vertical with closed top of threaded lid) hoisted and fixed in position all as specified in SSR Part-I of Capacity 500 litres including GI inlet, out let, over flow and wash out complete all as specified and directed.

S&F rotational moulded polyethylene water storage tanks, three layered , ISI marked (cylindrical vertical with closed top of threaded lid) hoisted and fixed in position all as specified in SSR Part-I of Capacity 1000 litres including GI inlet, out let, over flow and wash out complete all as specified and directed.

S&F Jafri Wall of any design of reinforced cement concrete of size 600 x 450 mm/600 x 600 mm fixed to brick or concrete surface with binding wire and cement slurry complete all as specified and directed

S&F in repair 32mm dia PVC waste pipe for WHB complete all as specified and directed.

S&F in repair 40mm dia PVC waste pipe for kitchen sink complete all as specified and directed.

S&F in repairs stainless steel kitchen plate rack of size not less than 24"x31"x10", 0.63mm thick with adequate shelves all as specified and directed

S&F in repair Kitchen plate rack of steel 1mm thickness size 900 x 900x 250mm of weight not less than 8 Kgs complete all as specified.

S&F Vitreous China wash down two piece water closet pan (padesal pattern) incl soft close seat cover and twin flush fittings incl complete fixing accessories in repairs complete all as specified and directed

S&F Vitrerous China one piece wash basin with integrated half pedestal white, size 550x485 including complete fixing accessories fixed in repairs complete all as specified and directed

M&L for machine cut kota stone slab flooring 18-20 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing incl screed bed or bedding layer of mortar 20 mm thick for laying floor finishes in CM 1:4 complete all as specified and directed.

M&L for machine cut kota stone slab 18-20 mm thick in riser of steps, skirting, dodo and pillar laid over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing incl screed plaster of 10 mm thick on fair faces of brick work in CM 1:4 complete all as specified and directed.

M&L marble work 18 to 20 mm thick (table rubbed and polished) as border strips of 150mm thick in floors etc. in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade of Makrana White including screed bed of 20 mm thick in cement mortar 1:4 complete all as specified and directed.

Taking down cement or cement lime plaster, any description on brick or stone walls, etc. including racking out joints , hacking for key, scrubbing down with water, etc. complete all as specified and directed.

M&L rendering 15 mm thick in cement mortar 1:4 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed. (Note: WPC shall be measured and paid separately under appropriate item as supply only)

Supply only integral water proofing compound complete all as specified and directed.

M&L rendering 10 mm thick in cement mortar 1:4 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.

M&L rendering 5 mm thick in cement mortar 1:3 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement as in ceilings etc. complete all as specified and directed.

M&L for preparation of new plastered or unplastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed.

M&L for preparation of new plastered surfaces on walls, priming plastered and other surfaces with alkali resistant priming paint and applying two coats with distemper oil emulsion, white or tinted complete all as specified and directed.

M&L for preparation of new plastered surfaces of wall and applying two coats of cement base paint distemper and priming plastered and other surfaces with chalk whiting, preparatory to distempering complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed

Demolition of cement concrete (unreinforced) in ground floor, paving not exc. 15 cm thickness (below or above ground level) complete all as specified and directed

M&L for 75 mm thick cement concrete 1:4:8 type D 2 (40 mm graded aggregate ) as in sub base, finished even and rough to receive the topping layer complete all as specified and directed

M&L for glazed ceramic coloured tiles in vertical surface 300 x 200 x 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over 10 mm thick rendering on fair faces of brick work or concrete surfaces in CM 1:3 for receiving tiles complete all as specified and directed.

M&L for Non-skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exc 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over screed bed or bedding layer of mortar 20 mm thick of cement plaster (1:6) complete all as specified & directed.

M&L for Non-skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exc 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over screed bed or bedding layer of mortar 20 mm thick of cement plaster (1:6) complete all as specified & directed.

M&L for light shade vitrified ceramic tiles 10 mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed 20 mm thick in CM 1:6 complete all as specified and directed

M&L for light shade vitrified ceramic tiles 10 mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm in vertical surface etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match including rendering 10 mm thick in CM 1:3 complete all as specified and directed

M&L for 20 mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platform and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

M&L for glazed ceramic coloured tiles in vertical surface 350 x 250 x 7 mm/450 x 350 x 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match incl rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement plaster 1:3 complete all as specified and directed

M&L for 18/19mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination, fixed with screws to timber frame work, including teak wood lipping 19 x 6mm thick fixed with nails complete all as specified and directed.

S&F 30mm wide Continuous (piano) hinges, mild steel, bright finish or electrogalvanised fixing to wooden frame complete all as specified and directed.

S&F 100mm long fancy type Brass handles, cast type, polished bright complete all as specified and directed.

S&F magnet catcher fixed in cabnet shutter (one portion) and wooden frame (other portion) with screw complete all as specified and directed.

Taking down eaves gutters and rain water pipes (any size or pattern), including all fittings, heads, shoes, bends, swan necks etc., including cleaning or refixing or removal to store complete all as specified and directed

S&F 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls complete all as specified and as directed.

S&F 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls complete all as specified and as directed.

S&F 110mm bore PVC (SWR) bends of any radius, complete all as specified

S&F 75mm bore PVC (SWR) bends of any radius, complete all as specified

M&L 100 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed

Checking of joinery (wooden/steel) iron/aluminium mongery, pelmet box, door springs etc requiring carpentry work and carrying out minor repairs such as tightening of screws/nails, fixing glass panes, minor adjustment of joinery, door etc. including petty repairs material like screws/nails, plug etc. to make it functional complete all as specified and directed by Engr-In-Charge. Note : Any items required to be replaced shall be paid under respective items.

Checking of floor, plinth, plaster etc requiring masonry work and carrying out minor repairs such as edges, patches etc, including petty repairs material like sand, cement & aggregate to make it functional complete all as specified and directed by Engr-In-Charge. Note : Any items required to be replaced or major repair shall be paid under respective items.

Checking and attending to water leakage from taps, flushing cisterns, wash hand basins and other sanitary fittings/fixtures and any obstruction to water supply, requiring plumber work and carryout minor repairs such as replacement of washers, check nuts, tightening of fittings of flushing cistern etc including petty materials like washers of all sizes, thread(shoot), M-seal, screws, nails to make water supply/ plumbing lines functional and leak proof complete all as specified and directed by Engr-In-Charge. Note : Any items required to be replaced shall be paid under respective items.

Cleaning of sewage line upto first man holes blockage of WC, EWC, Bathroom, floor trap of WHB/Kitchen pipe etc complete all as specified and directed.

Cleaning of sludge from the manholes by taking out loose sediment sand,girt,ash,sludge water, rags ,fibres or vegetation from including removal of sludge/debris to a distance exc 250m but n exc 500m and buried under ground complete all as specified and directed

Demolition of brick work or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc., but excluding ashlar facings, dressed stoneswork and precast concrete articles complete all as specified and directed

M&L brick work with sub class 'B' bricks, straight or curved on plan exc. 6 mtr mean radius built in cement mortar 1:6 complete all as specified and directed.

S&F steel window ( box type ) glazed and gauged using ERW hollow 'P' section double frame jointed internally with 25x3mm complete as per TD- 219(c) sheet 1/3 to 3/3 with side hung shutter including butt binges, steel handles and steel peg stay, towel bolt & guard bars complete with glazing bars dovetailed or welded, including two coat of synthetic enamel ordinary tint paint over a coat of red oxide primer complete all as specified and as directed.

S&F box type ventilators glazed/gauged including MS grills of square section 8mm dia @ 100 c/c complete with glazing bars dovetailed or welded, including two coat of synthetic enamel ordinary tint paint over a coat of red oxide primer complete all as specified and directed.

S&F rolled mild steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, doors etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings exclusive of steel sheeting or other covering, running rails and guides) and hanging, also fastening and fixing etc., Fe-410 W Gde E-250 quality 'B' complete all as specified and directed

S&F mild steel sheet 1.25 mm thick plain, black sheet in wall cladding, steel gates and similar work, cut to size, holes punched, including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles etc., as required complete all as specified and directed

S&F 100 mm hasp and staples safety type, of aluminium anodised including bolt to hinge plate and fixed with screws, complete all as specified and directed

S&F in repairs 100 mm hasp and staples safety type, of aluminium anodised including bolt to hinge plate and fixed with screws, complete all as specified and directed

S&F in repairs 300 mm mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed

S&F IInd class hard wood for small fittings such as brackets of any type, latch and hinge blocks, shaped door and window stops and the like, including all necessary labour articles not exc 200 cu.cm each, complete all as specified and directed.

S&F bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, hooks stay, heavy, for large gates, hook pintle hinges, large hasp and staples, chains, hand made sliding bolts, clamps, hold fasts, wall ties, hooks for hanging fans, plain angle cleats for securing purlins to wood trusses or rafters, and similar small articles conforming to Fe-290 Gde E-165 complete all as specified and directed

M&L Providing Cement concrete Type B1 1 : 2 : 4 (20mm graded aggregate) as in roof kerbs or mud stops,in lintels upto 1.5 m span, copings slightly rounded or chamfered angles and throating including necessary form work complete all as specified and directed.

S&F figured glass, 3 mm thick pin head type and glazing with oil putty in square not exc. 0.5 sqm in each pane complete all as specified and directed

M&L for preparation of old painted wooden surfaces of any description, not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified & directed.

M&L for preparation of old painted steel surfaces of any description, over 10 cm width or girth, not other wise described and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for running welding in repairs, Thickness of metal to be welded not exc. 6mm, complete all as specified and as directed.

S&F In repair floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor, Overall length of cover plate 140mm complete all as specified and as directed.

Resecuring or easing & adjusting shutters of any description exc 1 sq. m and not exc 2 sq. m each, without taking down shutters complete all as specified and as directed.

Resecuring or easing & adjusting shutters of any description n exc 1 sq. m each, without taking down shutters complete all as specified and as directed.

M&L for taking down shutters of any description exceeding 1 square metre and n. exc 2 Sqm each and refixing in the same opening complete all as specified and as directed.

M&L for cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10cm girth in brick walls complete all as specified and as directed.

M&L for 32 mm waste fittings, brass, chromium plated for glazed ware sinks, basins etc with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed.

S&F in repair Swan Neck, Left Hand Operating Knob Pillar Tap of 15mm bore dia, chromium plated, screwed down, high pressure, with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and as directed.

S&F in repairs plastic water closet seat cover , white closed pattern with recessed bottom, and cover and mild steel chromium plated or aluminised hinging device, complete all as specified and directed

S&F in repair jet spray CP with flexible pipe complete all as specified and directed

S&F for 15mm dia angular cock of brass chromium plated, with long shank and cup screwed down high pressure, with crutch or butterfly handle complete all as specified and directed

S&F in repairs 15mm bore dia stop valves of Brass, any colour high pressure, screwed for iron pipe and fixed (minimum weight 350 gms) complete all as specified and as directed.

S&F in repair hand health faucet as specified and directed.

S&F in repair 15 mm bore dia gun metal, globe or gate valves with iron wheel head, screwed both ends for iron pipe complete all as specified and directed.

S&F in repair 20 mm bore dia gun metal, globe or gate valves with iron wheel head, screwed both ends for iron pipe complete all as specified and directed.

S&F in repair CP Soap dish 100mmx50mm complete all as speicified and directed

S/F in repair fancy type cabinet mirror size 600mm x 450mm as specified and directed

S&F in repair shelf of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (minimum weight 300gms) complete all as specified and as directed.

M&L 75 mm diameter of outlet PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed.

S&F door seal in wooden shutters including nails etc complete all as specified and as directed.