SPECIAL REPAIRS TO TOILET, SUNKEN FLOORING IN VARIOUS BLDG IN MD ACCN AND ELECTRICAL WIRING IN BLDG No 107 TRG BAY OF FEME UNDER GE MCEME SECUNDERABAD

Amount

Demolition of cement concrete (un-reinforced) in ground floors and pavings not exceeding 15 cm thickness (below or above ground level), complete all as specified and directed.

Dismantling floor, hearth or wall tilling including cement mortar bedding (but not backing) and removal of rubbish to a distance n exc 50 m all as specified and directed.

M&L for PCC 1:5:10 type E2 (using 40 mm graded granite stone aggregate) in sunken floor filling, mass concrete complete all as specified and directed.

M&L for 25 mm thick PCC 1:2:4, type B1 (using 20 mm graded stone aggregate), as in sub base to floor tiles, flooring to surface channels, sunken floors for WC area complete all as specified and directed.

M&L for two component Acrylic Polymer Modified Cementitious flexible waterproofing. The system includes base preparation of cleaning the surface mechanically or by grinding to make it smooth, removing all loose materialby jet of air, grouting the porous area with cementitious grout (Dr Fixit Pidicrete AM @ 225 gm/bag of cement or equivalent in Fosroc, STP), proper coving between slab and wall junctions with water proof compound polymer modified cementitious mortar in the ration 1:3 (cement:sand) (Dr Fixit Pidicrete URP @ 3% by wt of cement or equivalent in Fosroc, STP) and applying Dr.Fixit Pidifin 2K or equivalent in Fosroc, STP in two coats @ 0.75kg/sqm/coat (min) and for two coats it shall varies from 1.5 to 1.8 kg/sqm. Coating shall be done on the entire horizontal and vertical surfaces complete as per manufacturer's methodology and specification and ponding test complete. Note: The whole process shall be done by authorised company applicator.

M&L for 15 mm thick screed bed in CM 1:4, admixed with integral waterproofing compound Dr.Fixit Pidiproof Lw+ @ 0.2 ltr/bag of cement or equivalent in Fosroc, STP complete as per manufacture specification. Note: i) Water proofing compound shall not be measured and paid seperately and is deemed to be included in the quoted rate. ii) For the purpose of guarantee and calculation of secutity deposit item Nos 5 & 6 will be considered as one unit.

S&F in repair vitreous China squatting pan, ‘Orissa’ pattern, size 580x440 mm white, with integral foot rests, connection to trap, and to flushing pipe, antisphonage pipe, etc. complete including making good to floor and providing PVC valveless, 10 litre capacity, syphonic action type, low level flushing cistern, white, with inlet, ball valve, float and handle etc., complete all as specified and directed. Make: WC and Flushing cistern - Parryware cat No. C0117 & E8090/E8055 or equivalent in Hindware/Neycer/Cera.

S&F in repairs vitreous China wash down water closet pan (Pedestal Pattern) (EWC) white, including fixing bolts, plastic water closet seat, white, closed pattern, solid type with flat bottom and cover and mild steel chromium plated hinging device, & connection to P/S trap, PVC valveless, syphonic action type low level flushing cistern 10 litre capacity, white, with inlet, ball valve, float, handle including brackets, and flushing pipe 32 mm dia etc complete all as specified and as directed. Make: EWC and Flushing cistern - Parryware cat No. C 0297/78 and C 8094 (for WC & seat cover) and C 8090/C8055 (Flushing cistern Economy single flush) or equivalent in Hindware/Neycer/Cera.

S&F in repairs vitreous China wash basin half pedestal, 500x400x185 mm size, white, including fixing accessories set, rack bolt and 32 mm dia bottle trap with waste coupling complete all as specified and as directed. Make: Parryware Cat No. C0460, C0316, C8302, T9911A1, T3201A1 or equivalent in Hindware, Neycer, Cera, Johnson.

M&L for screed bed or bedding layers of cement mortar 1:6, 15 mm thick for laying floor finishes all as specified and directed.

M&L for rendering 10 mm thick as backing coat to tiles in fair faces of brick work or concrete surfaces in CM 1:4 complete all as specified and directed.

M&L for non skid digital coloured ceramic tiles 400x400x7 to 8 mm thick (min size) as in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of the tile complete all as specified and directed.

M&L for glazed coloured ceramic tiles in vertical surfaces 300x450x7 to 8 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match with the colour of the tile all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frames), area not exceeding 1.5 sqm each, complete all as specified and directed.

S&F factory made 100% termite & borer proof, moisture proof, fire retardant, eco-friendly product made from 100% virgin PVC resin solid wood plastic composite (WPC) door frames of cross section 90x45 mm made from wood plastic composite (single extruded process) material having minimum density of 780 kg/cum, single rebate 30x10 mm to receive shutter of 28-30 mm thickness.

S&F of 28-30 mm thick factory made rigid WPC plain/pre laminated door shutter made with 100% solid PVC flush door shutter made from co-extruded three layer PVC foam sheet (single extruded) with density not less than 600 kg/cum, outer layer min. 1 mm thick shall be of rigid PVC with density not less than 1400 kg/cum.

S&F 75 mm long medium weight, stainless steel butt hinges.

S&F200 mm long aluminium alloy anodised sliding door bolt with hasp staple (bolt type) and fixing clips of sheet ,cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and directed

S&F 150 mm long aluminium anodized barrel tower bolt of extruded section complete all as specified and as directed.

S&F 200 mm long extruded aluminium alloy anodized handle fabricated type complete all as specified and as directed.

Taking down eaves gutters and rainwater pipes (any size and pattern), including all fittings heads, shoes, bends, swan-necks etc., including cleaning or refixing or removal to store (measured overall as fixed along the centre line over fittings and accessories)

S&F 110 mm bore PVC SWR pipe single socketed in any length with rubber ring joints fixed to wall, for rain water pipe with necessary fittings complete all as specified and as directed.

S&F 75 mm bore PVC SWR pipe single socketed in any length with rubber ring joints fixed to wall, for rain water pipe with necessary fittings complete all as specified and as directed.

S&F in repair PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement, complete all as specified and directed.

Taking down cement plaster of any description on brick or stone walls,etc. including racking out joints hacking for keys scrubbing down with water etc., complete all as specified and as directed.

M&L for rendering 15 mm thick in fair faces of brick work or concrete surfaces in CM 1:6 finished even and smooth with out using extra cement all as specified and directed.

M&L for rendering 15 mm thick in fair faces of brick work or concrete surfaces in CM 1:4 finished even and smooth with out using extra cement all as specified and directed.

M&L for rendering 5 mm thick on fair faces of concrete surfaces in CM 1:3 and finished even and smooth in ceiling, chajja, edges of roof etc without using extra cement complete all as specified and directed.

M&L for preparation of new plastered surface of walls and apply two coats of acrylic emulsion distemper over a coat of alkali resistant primer complete all as specified and directed.

M&L for preparation of new plastered surface of walls and apply two coats of cement based paint over a coat of primer complete all as specified and directed.

M&L for preparation of new plastered surface of ceiling and applying two coats of acrylic emulsion distemper over a coat of alkali resistant primer complete all as specified and directed.

S&F in repairs 15 mm bore, bib tap with wall flange, long body, fancy type, brass chromium plated, with crutch handle, screwed down for iron pipe and fixed etc. complete all as specified. Make: Essco MQT-512KN or equivalent in Hindware, Parryware, Neycer, Cera, Johnson, Jainko, Aluminium Udyog (Kunchal).

S&F in repairs 15 mm bore Pillar taps, brass, chromium plated with capstan heads, screwed down high pressure, with long screwed shanks and fly-nuts, screwed for iron pipe and fixed, 15mm dia of pipe, complete all as specified and directed. Make: Essco MQT-507KN or equivalent in Hindware, Neycer, Cera, Johnson, Jainko, Aluminium Udyog (Kunchal).

S&F in repairs fancy type chromium plated with long shank 15 mm bore stop valves, cast copper alloy, screwed down high pressure with crutch handle screwed both ends for iron pipe or for unions. Make: Essco MQT-514EKN or equivalent in Hindware, Parryware, Neycer, Cera, Johnson, Jainko, Aluminium Udyog (Kunchal).

S&F in repairs GI water tubing medium grade 15 mm dia with all fittings laid in floor or fixed in walls complete all as specified and as directed.

S&F in repairs GI water tubing medium grade 20 mm dia with all fittings laid in floor or fixed in walls complete all as specified and as directed.

S&F in repairs grating doom type 100 mm dia of PTMT (min. weight 25 gms) complete all as specified and as directed.

S&F in repairs grating doom type 125 mm dia of PTMT with waste hole (min. weight 40 gms) complete all as specified and as directed.

S&F in repairs 15 mm bore dia gun metal, globe or gate valve with iron wheel head screwed both ends for iron pipe complete all as specified and as directed.

S&F in repairs 20 mm bore dia gun metal, globe or gate valve with iron wheel head screwed both ends for iron pipe complete all as specified and as directed.

S&F 40 to 50 cm long, 32mm dia GI pipe medium grade as water spout fixed at the bottom most level of sunken portion, embeded around with cement concrete 1:2:4 type B1, including cutting hole of suitable size through stone/brick walls and making good with cement mortar 1:3 complete all as directed.

S&F in repairs PVC (SWR) bend/shoe for 150/160mm dia complete.

Taking down point wiring of any type complete for light, fan, tube, bell, socket or power point with fittings & fixtures and issue under schedule of credit to contractor including making good disturbed surface to match the existing surface complete all as specified and directed.

Taking down main switch, cut out, distribution board, of any type and capacity and making good disturbed surface complete all as specified and directed.

M&L for point wiring with 1.5 sq mm copper conductor single core PVC insulated (FRLS) unsheathed 1100 Volts multistranded drawn through and including non metallic rigid PVC conduit and conduit accessories of 20 mm dia medium grade ISI mark surface type and pressed steel terminal box of 2.0 mm, MS suitable size, duly painted with red oxide primer including fixing/grouting sunken/surface as per site requirement covered with 3 mm thick laminated hylam sheet including running up of 1.5 sq mm copper conductor PVC wire earth continuity conductor alongwith wiring and connecting to the common earth dolly as specified for for one light point/ fan point/bell point controlled by one way switch switch 5/6 A, SP. Note: The wiring is to be carried out at 7 m (approx) height shead, on surface of walls, trusses accordingly cost of requisite items for fixing of conduit wiring is to be included in the item rate.

All as per SI item No 45 above but one 3 pin 6 A switch socket point controlled by one switch on independent board.

All as per SI item No 45 above but one 3 pin 6 A socket point on same board with other switch.

All as per item No 45 above but for one 3/5 pin 5/15 Amp socket outlet point controlled by one switch using 2.5 sqmm copper conductor cable with continuous earth wire of 2.5 sqmm copper conductor on independent board complete all as specified and directed .

S&F switch piano type, 6 A, 230 V AC, single pole, one way.

S&F bell push, flush type, 6 Amp SP one way.

S&F bell AC 230 Volt ding dong type SP.

S&F socket out let, type 2 in 1, 3/5 pin, 5 A, flush type, 230 V

S&F switch socket combination 2 in 1, 3/5 pin, 5 & 15 A, 230 V, flush type universal

S&F Ceiling rose, 3 terminal, PVC polycarbonate, insulated body ISI marked.

S&F stepped type (5 steps) electronic fan regulator, AC, 230 V, flush type, suitable for 1200/1400 mm sweep complete all as specified and directed.

S&F sheet metal enclosure for MCB DB SPN 12 way, 240 Volts, 3 phase, double door with IP-43 protection suitable for 200 Amps rated bus bar complete all as specified and directed. Make: Legrand, Schneider, GE, ABB, Siemens, L&T.

S&F sheet metal enclosure for MCB DB SPN 8 way, 240 Volts, 3 phase, double door with IP-43 protection suitable for 200 Amps rated bus bar complete all as specified and directed. Make: Legrand, Schneider, GE, ABB, Siemens, L&T.

S&F sheet metal enclosure for MCB DB TPN 4 way, 415 Volts, 3 phase, double door with IP-43 protection suitable for 200 Amps rated bus bar, 12 out going MCB SP double door complete all as specified and directed. Make: Legrand, Schneider, GE, ABB, Siemens, L&T.

S&F MCCB 4P, 125 Amps, 16 kA including taking down old MCCB complete all as specified and directed. Make: Legrand, Schneider, GE, ABB, Siemens, L&T.

S&F MCCB 4P, 100 Amps, 16 kA including taking down old MCCB complete all as specified and directed. Make: Legrand, Schneider, GE, ABB, Siemens, L&T.

S&F MCB SPN, 240 Volts, 40 A, C curve, all as specified and directed. Make: Legrand, Schneider, ABB, Siemens, L&T.

S&F MCB SPN, 240 Volts, 63 A, C curve, all as specified and directed. Make: Legrand, Schneider, ABB, Siemens, L&T.

S&F MCB SP, 240 Volts, 6-32 A, C curve, all as specified and directed. Make: Legrand, Schneider, ABB, Siemens, L&T.

M&L for sub main wiring complete with 2 runs of 6 Sqmm single core HRFR, PVC insulated unsheathed cable 1100 V grade with multistranded copper conductor ISI marked drawn through in and including 25mm dia PVC conduit of medium grade and conduit accessories of suitable size fixed on walls / roofs / floors etc with provision of one run of 6 Sqmm HRFR, PVC insulated unsheathed cable with multistranded copper conductor as earth continuity., including dismantling old sub main wiring and making good disturbed surfaces complete all as specified and as directed. Note: Three runs of 6 sq.mm copper cable and one run of PVC conduit and required conduit accessories shall be measured as one unit length.

S&F sheet metal enclosure, double door locking system, IP-43 protection with 2 pole and earth metal plug & socket including 20 A SP MCB including taking down existing sheet metal enclosure complete all as specified and directed. Make: Legrand, Schneider, Siemens, L&T.

M&L for Earthing complete with GI earth plate electrode 600x600x6 mm thick buried directly in ground vertically to a depth of not less than 2.25m deep below ground level with the top edge of earth plate at a depth of not less than 1.5m below ground level connected to GI earth wire 4mm dia by means of bolts, nuts, washers of galvanised iron or steel, GI earth wire shall be protected by 15mm dia GI pipe 'light grade', watering pipe 20mm dia GI pipe 'medium grade', GI wire meshed funnel, alternate layer of charcoal and salt on all side to earth plate upto a thickness of 150mm, filling of black cotton soil in earth pit upto GL, and connected to earth plate including necessary excavation & earthwork, PCC (1:3:6) type C-1 earth chamber, 40mm thick RCC cover (1:2:4) type B1 mix with 8mm dia TMT bars @ 100mm c/c both ways etc complete all as shown in electrical Plate No.3 connected to earthing test point, complete including testing on completion all as speciified and as directed. Notes: Quoted rate shall deemed to include the cost of excavation and earth work in any type of strata.

Supply, lay, test and commissioning 3.5 core 50 sq.mm LT PVC/XLPE insulated, armoured, heavy duty under ground electric cable with aluminium conductor, 1100 V grade, including cable lugs, jointing materials etc, laid in walls, floors, pipes, trenches fixed on poles or laid through GI pipes and including taking down old cable complete all as specified and directed.

Supply and lay galvanised steel tubes 40 mm dia, light grade, including all fittings laid in trenches, walls as cable protection complete all as specified and directed.

S&F earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. as required 4mm dia galvanised iron or steel wire.

Supply and lay medium grade GI tubing of 15 mm dia for protection of earthing lead including fixing arrangements to walls/floors complete all as specified as directed.

S&F Cross arms, bracings, supports, clamps and back plates fabricated from structural steel sections including nuts, bolts, washers, welding, bending cold or hot, drilling holes for bolts, in any shape or size as indicated or directed and inclusive of one primer coat, one under coat and one finishing coat of paint complete all as specified and directed.

M&L for PVC insulated flexible multistandard copper cable 1.5 Sqmm 3 core complete all as specified and directed

M&L for PVC flexible conduit 15mm dia complete all as directed.

S&F 2'x2' recess mounted full glow LED luminaire with white powder coated housing acting as heat sink and frame in CRCA sheet, high efficiency LED grade diffuser, in built electronic driver duly wired up to terminal block, power consumption < 30W, luminaire lumen > 3500 lm and system efficiency >120lm/W, CRI>80, LED Make:- Nichia/ Cree/ Osram/ Lumiled only with LED binning as per ANSI Bin C78.377A, photo biological safety report as per IEC62471 & electrical insulation class 1, colour temp 6500K, Ingress protection IP 20, driver efficiency >85%, 50,000 burning hours (min) as per L70 criteria, ambient temp 0 to 50 degree centigrade, power factor >0.95, THD < 10%, surge protection 3 kV, two stages isolated constant current operated driver with voltage range 120-270V AC and safety extra low Voltage safe level <60V DC as per IEC standard, with LM79 & LM80 certification. Make:- Philips Model No. RC380B LED36S-6500 G5 L60 W60 PSU OD or equivalent model of CG, Wipro, Bajaj.

S&F 70 W high efficient LED security light with aluminium pressure die cast housing for long life, high purity polycarbonate fresnel diffuser, with silicon gaskets for IP66 protection, IK08,in built electronic driver with phase to phase protection at 440V for 8 hours with high voltage cut off, potted driver to protect against moisture,duly wired up to terminal block, LED Make : Nichia/ Cree/ Osram/ Lumiled, colour rendering index CRI>70, temp range 0 to 45 degree centigrade, driver efficiency >90%, power factor > 0.95, THD <10% as per IEC 61000-3-2, colour temp 6500K, surge protection in 4 kV, 50000 burning hrs (min) as per L70 criteria, Voltage range 120-270V AC and safety extra low Voltage safe level < 60 V DC as per IEC standard with LM79 & LM 80 certification and light fitting. BIS mark is mandatory for LED light fixtures/drivers. shall be fitted to bracket made of GI pipe, 50-60 mm dia medium grade, 1.5 m length, bend to shape to require angle (cutting and welding the GI pipe not acceptable to achive required angle) holding saddles, MS clamps and nuts etc. complete fixed to existing pole/wall as specified and directed. Make:- Philips Model No. BRP062 LED82 CW SLA S1 PSU or equivalent model of Wipro, Bajaj, CG.

S&F highbay LED luminair, with presssure die cast aluminium housing of capacity not lessthan 80W, with all accessories including necessary electrical connection complete Make : Philips Model No. BY 225P LED 100S CWWB PSU or equivalent model of Wipro, Bajaj, CG.

S&F of 30W LED Flood light fixtures, housing made of pressure die cast aluminium, Toughened and shatter-proof quality lens enhances safety, 4KV internal surge protection, IP65, IK07, power fcator 0.9, Class 1 insulation, CCT 5700K, Make: Philips BVP161 LED26/CW 30W 220-240V WB GREY IN or or equivalent model of Wipro, Bajaj, CG.

S&F 4'x1' recess mounted full glow LED luminaire with white powder coated housing acting as heat sink and frame in CRCA sheet, high efficiency LED grade diffuser, in built electronic driver duly wired up to terminal block, power consumption < 30W, luminaire lumen > 3500 lm and system efficiency >120lm/W, CRI>80, LED Make:- Nichia/ Cree/ Osram/ Lumiled only with LED binning as per ANSI Bin C78.377A, photo biological safety report as per IEC62471 & electrical insulation class 1, colour temp 6500K, Ingress protection IP 20, driver efficiency >85%, 50,000 burning hours (min) as per L70 criteria, ambient temp 0 to 50 degree centigrade, power factor >0.95, THD < 10%, surge protection 3 kV, two stages isolated constant current operated driver with Voltage range 120-270V AC and safety extra low Voltage safe level <60V DC as per IEC standard, with LM79 & LM80 certification. Make:- Philips Model No. RC380B LED36S-6500 G5 L3 W12 PSU OD or equivalent model of CG, Wipro, Bajaj.

SAI RUPA CONSTRUCTIONS