RENOVATION AND UPGRADATION OF VETERINARY POLYCLINIC AT LADOWALI ROAD JALANDHAR

Select, At Par, Excess (+), Less (-) IOCL

Tender Inviting Authority :- EXECUTIVE ENGINEER PROVINCIAL DIVISION PWD B&R JALANDHAR

Name of Work :- DNIT FOR RENOVATION AND UPGRADATION OF VETERINARY POLYCLINIC AT LADOWALI ROAD JALANDHAR.

Contract No: Civil Works

Name of the Bidder/ Bidding Firm / Company :

Sl. No. Work Name Item Code / Make Quantity Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category

1 A (CIVIL WORK) 2

2 A1) REPAIR WORK OF GROUND FLOOR 3

3 Scraping (c) Cement plaster 4 Sqm Excess(+) Full Conversion INR

4 Removing doors and windows together with the dismantling of walls (i) Doors 5 Each Excess(+) Full Conversion INR

5 Dismantling brick work tile, masonry or tile lining (b) In cement 6 Cum Excess(+) Full Conversion INR

6 Credit of Brick 7 Each Excess(+) Full Conversion INR

7 Credit of Brick Bats 8 Cum Excess(+) Full Conversion INR

8 Centering and shuttering for faces of walls, partitions, retaining walls and the like (vertical or battering including attached pilasters buttresses etc. 9 Sqm Excess(+) Full Conversion INR

9 Reinforced cement concrete M-20 mechanically batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in superstructure. 10 Cum Excess(+) Full Conversion INR

10 Centering and shuttering for sides and soffits of beam, beams, launching girders, bressumers, lintels. 11 Sqm Excess(+) Full Conversion INR

11 Cold twisted detormed (Ribbed/ Tor steel) Bars (Fe 500 grade as per IS 1786-2008) , for R.C.C works, where not including in the complete rate of RCC including bending and binding placing in position complete 12 Qtl Excess(+) Full Conversion INR

12 First class burnt brick work laid in cement sand mortar 1:6 in first storey upto 4 metres above plinth level. 13 Cum Excess(+) Full Conversion INR

13 12.5 mm thick cement plaster 1:5 14 Sqm Excess(+) Full Conversion INR

14 20mm thick cement plaster 1:5 in two coat work 15 Sqm Excess(+) Full Conversion INR

15 12.5 mm thick cement plaster 1:4 16 Sqm Excess(+) Full Conversion INR

16 20mm thick cement plaster 1:4 in two coat work 17 Sqm Excess(+) Full Conversion INR

17 Scraping (a) White wash and colour wash 18 Sqm Excess(+) Full Conversion INR

18 Removing Doors and Windows (Steel or wood) with chowkhats by making recesses in walls when the wall is not to be dismantled. (a) Doors of area 3 sqm and below. 19 Each Excess(+) Full Conversion INR

19 Removing Doors and Windows (Steel or wood) with chowkhats by making recesses in walls when the wall is not to be dismantled. (b) Windows of area 3 sqm and below 20 Each Excess(+) Full Conversion INR

20 Supplying and fixing of GI sheet frames (Chowkat) consisting of 18 gauge (1.25mm) thick steel sheet of the specified section (standard design latest), including iron lugs (hold fasts) iron hinges conforming to PWD specifications including bolts for fixing steps, lock notch provision for receiving tower bolts and finished, fixed in position including the cost of cement concrete 1:3:6 for filling in the frame and cement concrete 1:2:4 for lugs complete to the satisfaction of Engineer-in-charge. c) Doors and windows frame of size 151mm x 60mm with 35 mm wide double rebate weighing 3.95 kg per meter. 21 Metre Excess(+) Full Conversion INR

21 Factory manufactured solid flush door fixed in position iron hinges, etc (excluding the cost of any fittings other than specified above but including labour for fixing the same in position (Code :IS 2202-1 (1999): (a) Commercial with elm or gurjan facing on both \ Sides with laminated core and lipped edges:- (iv) 35mm thick 22 Sqm Excess(+) Full Conversion INR

22 Preparation of plywood surface for painting including sand papering the surface and applying filling with approved quality fillers consisting of white lead, linseed oil, Varnish, and Chalk Mitti including finishing the surface to required finish complete. 23 Sqm Excess(+) Full Conversion INR

23 Providing and fixing hydraulic door closer ISI mark with necessary screw etc. Complete (c) I.S.I Designation No. III (size of door 851mm to 1000mm) 24 Each Excess(+) Full Conversion INR

24 Cost of aluminum fittings complete for doors, windows such as tower bolts, handles,Stoppers and screw etc. for these fittings (Excluding sliding bolt) ii) For shutter area above 0.50 sqm 25 Sqm Excess(+) Full Conversion INR

25 Providing & fixing of Box type steel windows, made of various ERW section outer 60mm x 25mm, central mullion 60mm x 25mm, for shutter 50mm x 20mm having thickness of 1.25mm (18 gauge), shash bar MS Tee 25mm x 3mm where required joints mitered and electrically flashwelded, with iron fittings including necessary iron handles, hinged cleat, tower bolts, iron hold fast and pintle hinges complete (excluding glazing and wire gauge) and finished with ready mixed paint red lead non setting primer complete as per specification, Drawings and to the entire satisfaction of engineer-in-charge. (Note:- Glazing, wire gauge and grill will be paid as per respective items) 26 Kgs Excess(+) Full Conversion INR

26 Wrought iron & Mild steel ladders, framed grills, gratings etc. with ends of bars riveted or molded forged framed window guards, barred iron doors stair case iron railing etc. including cost of bolts and nuts, screws, welding rod complete fixing in position 27 Qtl Excess(+) Full Conversion INR

27 Supplying and fixing glass panes with glazing clips and special metal sash putty of approved make. (b) Glass panes 4mm or 10.75 kg / sqm exceeding 0.4 sqm of area 28 Sqm Excess(+) Full Conversion INR

28 Extra for providing & fixing Steel beading of approved shape steel tube beading size 12mm X 12mm, 18 gauge of approved shape and section with screw for fixing of glass panes instead of glazing clips and metal slash putty in steel doors , windows & Ventilators complete in all respect 29 Metre Excess(+) Full Conversion INR

29 Applying priming coat with metal primer on new steel or iron work including preparation of surface. 30 Sqm Excess(+) Full Conversion INR

30 Painting two or more coats excluding priming coat with synthetic enamel paint in all shades on wood work, metallic or plastered, concrete surface to give an even shade. 31 Sqm Excess(+) Full Conversion INR

31 Applying pink primer or aluminum priming coat on wood work including preparation of surface knotting and stopping etc. 32 Sqm Excess(+) Full Conversion INR

32 Painting two or more coats with synthetic enamel paints in all shades on old wood work or metallic or plastered or concrete surface to give an even shade including rubbing down old paint. 33 Sqm Excess(+) Full Conversion INR

33 Providing and fixing aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate z sections and other sections conforming to Is: 733 and IS : 1285 of Jindal, Hindalco, Mahavir or equivalent make approved by Engineer in Charge , fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC Plug/neoprene felt etc. aluminum sections shall be smooth, rust free, straight, mitered and jointed mechanically wherever required including cleat angle, aluminum snap beading for glazing/paneling, C.P.brass/stainless steel screws, all complete as per architectural drawings and the directions of Engineer-In- Charge. (Glazing and paneling to be paid for separately) : (a) For fixed portion and chawkhats 34 Kgs Excess(+) Full Conversion INR

34 Providing and fixing aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate z sections and other sections conforming to Is: 733 and IS : 1285 of Jindal, Hindalco, Mahavir or equivalent make approved by Engineer in Charge , fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC Plug/neoprene felt etc. aluminum sections shall be smooth, rust free, straight, mitered and jointed mechanically wherever required including cleat angle, aluminum snap beading for glazing/paneling, C.P.brass/stainless steel screws, all complete as per architectural drawings and the directions of Engineer-In- Charge. (Glazing and paneling to be paid for separately) : (b) For shutters of doors, windows & ventilators including providing and fixing hinges/pivots and labour for fixing of fittings wherever required including the cost of PVC Plug / neoprene gasket required 35 Kgs Excess(+) Full Conversion INR

35 Providing and fixing glazing in aluminum door, window, ventilator shutters and partitions etc. with PVC Plug/ neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminum snap beading shall be paid in basic item) i) Float glass panes of 5 mm thickness 36 Sqm Excess(+) Full Conversion INR

36 Providing Polyester Powder coating 50 micron any coloured specified to alumnum section of various sizes including carriage of material from market to workshop & workshop to site of work. 37 Kgs Excess(+) Full Conversion INR

37 Renewing glass panes with putty and nails wherever necessary (b) Glass panes weighing 10.75 Kg/sqm 38 Sqm Excess(+) Full Conversion INR

38 Wire gauge fixed in steel windows, of standard rolled steel section with 3mm thick flat iron cover moulding of 12.5 mm width, fixed with machine screws, complete in all respects. 39 Sqm Excess(+) Full Conversion INR

39 Providing & fixing factory made Solid PVC Chowkhat Door frame of the size 50mm x 47mm with a wall thickness of 5mm made out of extruded 5mm PVC foam sheet, mitre cut at 2 corners & joined with 2Nos of 150mm long brackets of 15 x 15mm M.S square tube. the two vertical doors profiles are to be reinforced with 19 x 19mm M.S square tube of 19 guage, the door framed shall be fixed to the wall using 65/100mm long M.S screws through the frame by using fasteners. a minimum of 4 nos of screws to be provided for each vertical member & minimum 2nos for horizontal member etc. as per manufacturer's specification,conforming to test criteria specified in IS:4020-1998, Drawings and to the entire satisfaction of engineer-in-charge. 40 Metre Excess(+) Full Conversion INR

40 Providing and fixing of 30mm thick factory made Polyvinyl Chloride (PVC) door shutter (without chowkhat) made of styles and rails of a UPVC Plug profile section of size 30mm x 60mm and wall thickness 2mm ±0.2mm with inbuilt decorative molding edging on one side. The styles and rails with plastic brackets of size 75x220mm meter and welded at the corners. The- stiles of the shutter reinforced by inserting galvanized MS tube of size 25x20mm and 1mm ± 0.1mm wall thickness. The lock rail made up of ‘H’ section, a UPVC Plug profile section of size 30mm x 100mm and 2mm±0.2mm wall thickness welded to the shutter style with a UPVC Plug profile section single panel of size not less than 620mm, having overall thickness of 20 mm and 1 mm±0.1 mm wall thickness with 20 mm panel beading of suitable size /Glass(4mm thick plain glass)/louver section, louver frame of suitable size, as per manufactures specification and direction of Engineeringcharge. (For WC and bathroom door Shutter) 41 Sqm Excess(+) Full Conversion INR

41 Preparation of plastered or concrete surface for painting (including sand papering the surface) using ready mixed cement based wall putty by applying two or more coats to get required finish 42 Sqm Excess(+) Full Conversion INR

42 Distempering with Acrylic washable oil bound distemper (of approved manufacture) two or more coats on old distempered work when shade is changed 43 Sqm Excess(+) Full Conversion INR

43 Distempering with Acrylic washable oil bound distemper (of approved manufacture) two or more coats over one priming coat to give an even shade 44 Sqm Excess(+) Full Conversion INR

44 Finishing walls with textured exterior paint of required shade with two or more coats applied @ 3.28 litre/10Sqm over and including base coat of water proofing Cement Paint applied @ 2.20 Kg/10 Sqm 45 Sqm Excess(+) Full Conversion INR

45 Finishing walls with acrylic smooth exterior paint of required shade with two or more coats applied @ 1.67 litre/10Sqm over and including base coat of water proofing Cement Paint applied @ 2.20 Kg/10 Sqm 46 Sqm Excess(+) Full Conversion INR

46 A2) REPAIR WORK OF FIRST FLOOR & TERRACE 47

47 Scraping (c) Cement plaster 48 Sqm Excess(+) Full Conversion INR

48 12.5 mm thick cement plaster 1:5 49 Sqm Excess(+) Full Conversion INR

49 20mm thick cement plaster 1:5 in two coat work 50 Sqm Excess(+) Full Conversion INR

50 12.5 mm thick cement plaster 1:4 51 Sqm Excess(+) Full Conversion INR

51 20mm thick cement plaster 1:4 in two coat work 52 Sqm Excess(+) Full Conversion INR

52 Scraping (a) White wash and colour wash 53 Sqm Excess(+) Full Conversion INR

53 Removing Doors and Windows (Steel or wood) with chowkhats by making recesses in walls when the wall is not to be dismantled. (a) Doors of area 3 sqm and below. 54 Each Excess(+) Full Conversion INR

54 Removing Doors and Windows (Steel or wood) with chowkhats by making recesses in walls when the wall is not to be dismantled. (b) Windows of area 3 sqm and below 55 Each Excess(+) Full Conversion INR

55 Supplying and fixing of GI sheet frames (Chowkat) consisting of 18 gauge (1.25mm) thick steel sheet of the specified section (standard design latest), including iron lugs (hold fasts) iron hinges conforming to PWD specifications including bolts for fixing steps, lock notch provision for receiving tower bolts and finished, fixed in position including the cost of cement concrete 1:3:6 for filling in the frame and cement concrete 1:2:4 for lugs complete to the satisfaction of Engineer-in-charge. C) Doors and windows frame of size 151mm x 60mm with 35 mm wide double rebate weighing 3.95 kg per meter. 56 Metre Excess(+) Full Conversion INR

56 Factory manufactured solid flush door fixed in position iron hinges, etc (excluding the cost of any fittings other than specified above but including labour for fixing the same in position (Code :IS 2202-1 (1999): (a) Commercial with elm or gurjan facing on both \ Sides with laminated core and lipped edges:- (iv) 35mm thick 57 Sqm Excess(+) Full Conversion INR

57 Preparation of plywood surface for painting including sand papering the surface and applying filling with approved quality fillers consisting of white lead, linseed oil, Varnish, and Chalk Mitti including finishing the surface to required finish complete. 58 Sqm Excess(+) Full Conversion INR

58 Providing and fixing hydraulic door closer ISI mark with necessary screw etc. Complete (c) I.S.I Designation No. III (size of door 851mm to 1000mm) 59 Each Excess(+) Full Conversion INR

59 Cost of aluminum fittings complete for doors, windows such as tower bolts, handles,Stoppers and screw etc. for these fittings (Excluding sliding bolt) ii) For shutter area above 0.50 sqm 60 Sqm Excess(+) Full Conversion INR

60 Providing & fixing of Box type steel windows, made of various ERW section outer 60mm x 25mm, central mullion 60mm x 25mm, for shutter 50mm x 20mm having thickness of 1.25mm (18 gauge), shash bar MS Tee 25mm x 3mm where required joints mitered and electrically flashwelded, with iron fittings including necessary iron handles, hinged cleat, tower bolts, iron hold fast and pintle hinges complete (excluding glazing and wire gauge) and finished with ready mixed paint red lead non setting primer complete as per specification, Drawings and to the entire satisfaction of engineer-in-charge. (Note:- Glazing, wire gauge and grill will be paid as per respective items) 61 Kgs Excess(+) Full Conversion INR

61 Wrought iron & Mild steel ladders, framed grills, gratings etc. with ends of bars riveted or molded forged framed window guards, barred iron doors stair case iron railing etc. including cost of bolts and nuts, screws, welding rod complete fixing in position 62 Qtl Excess(+) Full Conversion INR

62 Supplying and fixing glass panes with glazing clips and special metal sash putty of approved make. (b) Glass panes 4mm or 10.75 kg / sqm exceeding 0.4 sqm of area 63 Sqm Excess(+) Full Conversion INR

63 Applying priming coat with metal primer on new steel or iron work including preparation of surface. 64 Sqm Excess(+) Full Conversion INR

64 Painting two or more coats excluding priming coat with synthetic enamel paint in all shades on wood work, metallic or plastered, concrete surface to give an even shade. 65 Sqm Excess(+) Full Conversion INR

65 Applying pink primer or aluminum priming coat on wood work including preparation of surface knotting and stopping etc. 66 Sqm Excess(+) Full Conversion INR

66 Painting two or more coats with synthetic enamel paints in all shades on old wood work or metallic or plastered or concrete surface to give an even shade including rubbing down old paint. 67 Sqm Excess(+) Full Conversion INR

67 Renewing glass panes with putty and nails wherever necessary (b) Glass panes weighing 10.75 Kg/sqm 68 Sqm Excess(+) Full Conversion INR

68 Wire gauge fixed in steel windows, of standard rolled steel section with 3mm thick flat iron cover moulding of 12.5 mm width, fixed with machine screws, complete in all respects. 69 Sqm Excess(+) Full Conversion INR

69 Providing & fixing factory made Solid PVC Chowkhat Door frame of the size 50mm x 47mm with a wall thickness of 5mm made out of extruded 5mm PVC foam sheet, mitre cut at 2 corners & joined with 2Nos of 150mm long brackets of 15 x 15mm M.S square tube. the two vertical doors profiles are to be reinforced with 19 x 19mm M.S square tube of 19 guage, the door framed shall be fixed to the wall using 65/100mm long M.S screws through the frame by using fasteners. a minimum of 4 nos of screws to be provided for each vertical member & minimum 2nos for horizontal member etc. as per manufacturer's specification,conforming to test criteria specified in IS:4020-1998, Drawings and to the entire satisfaction of engineer-in-charge. 70 Metre Excess(+) Full Conversion INR

70 Providing and fixing of 30mm thick factory made Polyvinyl Chloride (PVC) door shutter (without chowkhat) made of styles and rails of a UPVC Plug profile section of size 30mm x 60mm and wall thickness 2mm ±0.2mm with inbuilt decorative molding edging on one side. The styles and rails with plastic brackets of size 75x220mm meter and welded at the corners. The- stiles of the shutter reinforced by inserting galvanized MS tube of size 25x20mm and 1mm ± 0.1mm wall thickness. The lock rail made up of ‘H’ section, a UPVC Plug profile section of size 30mm x 100mm and 2mm±0.2mm wall thickness welded to the shutter style with a UPVC Plug profile section single panel of size not less than 620mm, having overall thickness of 20 mm and 1 mm±0.1 mm wall thickness with 20 mm panel beading of suitable size /Glass(4mm thick plain glass)/louver section, louver frame of suitable size, as per manufactures specification and direction of Engineeringcharge. (For WC and bathroom door Shutter) 71 Sqm Excess(+) Full Conversion INR

71 Preparation of plastered or concrete surface for painting (including sand papering the surface) using ready mixed cement based wall putty by applying two or more coats to get required finish 72 Sqm Excess(+) Full Conversion INR

72 Distempering with Acrylic washable oil bound distemper (of approved manufacture) two or more coats on old distempered work when shade is changed 73 Sqm Excess(+) Full Conversion INR

73 Distempering with Acrylic washable oil bound distemper (of approved manufacture) two or more coats over one priming coat to give an even shade 74 Sqm Excess(+) Full Conversion INR

74 Finishing walls with textured exterior paint of required shade with two or more coats applied @ 3.28 litre/10Sqm over and including base coat of water proofing Cement Paint applied @ 2.20 Kg/10 Sqm 75 Sqm Excess(+) Full Conversion INR

75 Finishing walls with acrylic smooth exterior paint of required shade with two or more coats applied @ 1.67 litre/10Sqm over and including base coat of water proofing Cement Paint applied @ 2.20 Kg/10 Sqm 76 Sqm Excess(+) Full Conversion INR

76 Regrading terracing of mud plaster covered with tiles or bricks in cement by dismantling tiles or bricks, removing mud plaster, preparing the surface of mud plaster to proper, slope, relaying mud plaster Gobri leaping and tiles or bricks grouted in cement mortar 1:3 (1 cement and 3 fine sand) including replacing unserviceable tiles, or bricks with new over and disposal of unserviceable material to the dumping ground within 50 m lead (The cost of new tiles or bricks excluded). 77 Sqm Excess(+) Full Conversion INR

77 Cost of new tile to be replaced instead of broken tiles in regrading of tile terracing including loading/ unloading & all leads as desired by Engineer-in-Charge 78 Each Excess(+) Full Conversion INR

78 Terracing consiting of tiles 22.86x11.43x3.83cm laid over 25 mm mud plaster 7.5 cm mud filling on another layer of 25mm mud plaster including two coats of bitumen laid hot at 1.65 Kg. /Sqm top of R.C.C. slab including grouting with cement sand mortar 1:4 and top surface to be left clean after wire brushing 79 Sqm Excess(+) Full Conversion INR

79 Cement concrete 1:2:4 gola 10cm x 10cm concave quadrant along junction of roofs with parapet wall finished smooth, where specially specified 80 Metre Excess(+) Full Conversion INR

80 A3) ADDITION/ALTERATION OF NEW TOILET 81

81 Dismantling brick work tile, masonry or tile lining (b) In cement 82 Cum Excess(+) Full Conversion INR

82 Removing Doors and Windows (Steel or wood) with chowkhats by making recesses in walls when the wall is not to be dismantled. (a) Doors of area 3 sqm and below. 83 Each Excess(+) Full Conversion INR

83 Removing Doors and Windows (Steel or wood) with chowkhats by making recesses in walls when the wall is not to be dismantled. (b) Windows of area 3 sqm and below 84 Each Excess(+) Full Conversion INR

84 Scraping (c) Cement plaster 85 Sqm Excess(+) Full Conversion INR

85 Dismantling glazed tiles (to be carefully removed). 86 Sqm Excess(+) Full Conversion INR

86 Cement concrete 1:8:16 With stone aggregates 40mm gauge by mechanical means using concrete mixer volumetric type 87 Cum Excess(+) Full Conversion INR

87 Centering and shuttering for faces of walls, partitions, retaining walls and the like (vertical or battering including attached pilasters buttresses etc. 88 Sqm Excess(+) Full Conversion INR

88 Reinforced cement concrete M-20 mechanically batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in superstructure. 89 Cum Excess(+) Full Conversion INR

89 Centering and shuttering for sides and soffits of beam, beams, launching girders, bressumers, lintels. 90 Sqm Excess(+) Full Conversion INR

90 Cold twisted detormed (Ribbed/ Tor steel) Bars (Fe 500 grade as per IS 1786-2008) , for R.C.C works, where not including in the complete rate of RCC including bending and binding placing in position complete 91 Qtl. Excess(+) Full Conversion INR

91 Providing and laying Anti skid Ceramic floor tiles of size 300x300 mm x 10 mm thick of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on flooring skirting and dado in 12.5mm thick cement plaster 1:3 in base and jointed with @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., completewhite cement slurry in joints including corners angles and beading 92 Sqm Excess(+) Full Conversion INR

92 12.5 mm thick cement plaster 1:5 93 Sqm Excess(+) Full Conversion INR

93 20mm thick cement plaster 1:5 in two coat work 94 Sqm Excess(+) Full Conversion INR

94 First class burnt brick work laid in cement sand mortar 1:6 in first storey upto 4 metres above plinth level. 95 Cum Excess(+) Full Conversion INR

95 Preparation of plastered or concrete surface for painting (including sand papering the surface) using ready mixed cement based wall putty by applying two or more coats to get required finish 96 Sqm Excess(+) Full Conversion INR

96 Distempering with Acrylic washable oil bound distemper (of approved manufacture) two or more coats over one priming coat to give an even shade 97 Sqm Excess(+) Full Conversion INR

97 Providing & fixing factory made Solid PVC Chowkhat Door frame of the size 50mm x 47mm with a wall thickness of 5mm made out of extruded 5mm PVC foam sheet, mitre cut at 2 corners & joined with 2Nos of 150mm long brackets of 15 x 15mm M.S square tube. the two vertical doors profiles are to be reinforced with 19 x 19mm M.S square tube of 19 guage, the door framed shall be fixed to the wall using 65/100mm long M.S screws through the frame by using fasteners. a minimum of 4 nos of screws to be provided for each vertical member & minimum 2nos for horizontal member etc. as per manufacturer's specification,conforming to test criteria specified in IS:4020-1998, Drawings and to the entire satisfaction of engineer-in-charge. 98 Metre Excess(+) Full Conversion INR

98 Providing and fixing of 30mm thick factory made Polyvinyl Chloride (PVC) door shutter (without chowkhat) made of styles and rails of a UPVC Plug profile section of size 30mm x 60mm and wall thickness 2mm ±0.2mm with inbuilt decorative molding edging on one side. The styles and rails with plastic brackets of size 75x220mm meter and welded at the corners. The- stiles of the shutter reinforced by inserting galvanized MS tube of size 25x20mm and 1mm ± 0.1mm wall thickness. The lock rail made up of ‘H’ section, a UPVC Plug profile section of size 30mm x 100mm and 2mm±0.2mm wall thickness welded to the shutter style with a UPVC Plug profile section single panel of size not less than 620mm, having overall thickness of 20 mm and 1 mm±0.1 mm wall thickness with 20 mm panel beading of suitable size /Glass(4mm thick plain glass)/louver section, louver frame of suitable size, as per manufactures specification and direction of Engineeringcharge. (For WC and bathroom door Shutter) 99 Sqm Excess(+) Full Conversion INR

99 Providing & fixing 6" stainless steel handles ISI marked on door & window frames complete in all respect as per the directions of Engineer-in-charge. 100 Each Excess(+) Full Conversion INR

100 Providing and fixing hydraulic door closer ISI mark with necessary screw etc. Complete (c) I.S.I Designation No. III (size of door 851mm to 1000mm) 101 Each Excess(+) Full Conversion INR

101 Providing and fixing glazing in aluminum door, window, ventilator shutters and partitions etc. with PVC Plug/ neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminum snap beading shall be paid in basic item) ii) Float glass panes of 4mm thickness 102 Sqm Excess(+) Full Conversion INR

102 A4) CONSTRUCTION OF SHED 103

103 Dismantling concrete (d) Cement concrete plain1:2:4 mix 104 Cum Excess(+) Full Conversion INR

104 Earth work in excavation in foundations trenches etc. in all kinds of soil where Pick-Jumper work is not involved and not exceeding 2.0 metres depth including dressing of bottom and sides of trenches, stacking the excavated soil clear from the edge of excavation and subsequent filling around masonry in 15 cm, layers with compaction including disposal of all surplus soil as directed within lead of 30 metres. 105 Cum Excess(+) Full Conversion INR

105 Cement concrete 1:4:8 with brick balast 40mm gauge mixing by mechanical means using concrete mixer volumetric type 106 Cum Excess(+) Full Conversion INR

106 Reinforced cement concrete M-20 mechanically batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in foundation and plinth. 107 Cum Excess(+) Full Conversion INR

107 Reinforced cement concrete M-20 mechanically batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in superstructure. 108 Cum Excess(+) Full Conversion INR

108 Cold twisted detormed (Ribbed/ Tor steel) Bars (Fe 500 grade as per IS 1786-2008) , for R.C.C works, where not including in the complete rate of RCC including bending and binding placing in position complete 109 Qtl. Excess(+) Full Conversion INR

109 Shuttering for faces of concrete foundations and foundation beam & plinth beam (vertical or battering ) 110 Sqm Excess(+) Full Conversion INR

110 Centering and shuttering for columns (Square or ractangular or poly gonal in plain) 111 Sqm Excess(+) Full Conversion INR

111 Steel work in built up tubular pipes (round, square or rectangular hollow tubes etc. ISI Marked) for flat shed (ie.Where no truss work is involved) including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete 112 Qtl Excess(+) Full Conversion INR

112 Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5- 7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. (a) 0.50 mm (+ 0.05 %) th 113 Sqm Excess(+) Full Conversion INR

113 B (PUBLIC HEALTH) 114

114 Providing and fixing in position Chinaware European type water closet P trap or S trap of approved make (to the approval of the Engineer‐in‐ charge) consisting of 10 ltr. PVC flushing cistern ISI marked,PVC short bend 32 mm dia including cost of seat cover complete in all respect and to the entire satisfaction of Engineer‐in‐charge 115 Each Excess(+) Full Conversion INR

115 Providing and fixing jet spray with 2'‐6" long PVC pipe A) With C.P. Brass nut 116 Each Excess(+) Full Conversion INR

116 Providing and fixing in position vitreous chinaware white lavatory suites of approved make (to the approval of Engineer‐in‐charge) including Rack Bolt Screw Pair 115mm long without CP fittings complete in all respect iii) Size 630 mm x 450 mm x 830 mm 117 Each Excess(+) Full Conversion INR

117 Providing and fixing vitreous chinaware pedestal of approved make (to the approval of Engineer‐in‐charge) for wash hand basin complete in all respect. i) Vitreous chinaware standard white pedestal for wash hand basin. 118 Each Excess(+) Full Conversion INR

118 Providing and fixing in position 15mm C.P. Pillar cock foam flow of approved make (to the approval of Engineer‐in‐charge) 119 Each Excess(+) Full Conversion INR

119 Providing and fixing in position paper holders of approved make (to the approval of Engineer‐in‐charge ) fixed in to wall with C.P brass screws complete in all respect. 120 Each Excess(+) Full Conversion INR

120 Providing and fixing in position towel rails / ring of approved make (to the approval of Engineer‐in‐charge ) fixed in with rawl plugs embedded in walls with brass screws complete in all respect. A) C.P. brass towel Rails size 15mm dia 610mm long 121 Each Excess(+) Full Conversion INR

121 Providing and fixing in position C.P. brass soap dish of approved make (to the approval of Engineer‐in‐charge ) fixed into wall with rawl plugs and C.P brass screws complete in allrespect 122 Each Excess(+) Full Conversion INR

122 Providing and fixing in position vitreous Chinaware white lIndian make large flat back or angular lipped front urinal 375 x 390 x 590 mm of approved make (to the approval of the Engineer‐in‐charge) consisting of C.P. brass Urinal waste Coupling dome type 32mm outer length 75 mm , C.P. brass Urinal Spreader Ocular‐Regular and C.P. brass tube connection 300 mm long complete. 123 Each Excess(+) Full Conversion INR

123 Vitreous white Chinaware Partition 124 Each Excess(+) Full Conversion INR

124 Providing & Fixing in position 5mm thick bevelled edge mirror of superior glass (of approved make) complete with 4mm thick hard board backing fixed in with rawl plugs 50mm, C.P. brass screws and washers and S/S Studs on top complete in all respect (as required by the Engineer‐in‐ Charge) b) Size 550mmx400mm 125 Each Excess(+) Full Conversion INR

125 Providing & Fixing in postion 15 mm i/d bib cock of approved make (to the approval of Engineer‐in‐charge )complete in all respect. 126

126 i) C.P. brass Bib cock long nose/ long body foam flow without flange 127 Nos Excess(+) Full Conversion INR

127 ii) C.P. brass Bib cock foam flow without flange 128 Nos Excess(+) Full Conversion INR

128 Providing & fixing in position PVC flexible tube connection of approved make (to the approval of Engineer‐in‐charge ) complete in all respect b) PVC tube connection of size 15 mm x 450 mm with C.P. Brass nut 129 Each Excess(+) Full Conversion INR

129 Providing and fixing P.V.C Waste Pipe Collapsiable 32mm complete in all respect. 130 Each Excess(+) Full Conversion INR

130 Providing & Fixing in postion stop cock / Angle valve of approved make (to the approval of Engineer‐in‐charge ) complete in all respect 131

131 b) C.P.brass 15mm Concealed stop cock with flange. 132 Each Excess(+) Full Conversion INR

132 c) C.P.brass 15mm Angle valve without flange 133 Each Excess(+) Full Conversion INR

133 Providing and fixing in position automatic brass Ball Cock intanks. ii)20mm i/d 134 Each Excess(+) Full Conversion INR

134 Providing & Fixing in position C.P. Brass flange Dome of approved make (to the approval of Engineer‐in‐charge ) under various fixtures complete in all respect. 135 Each Excess(+) Full Conversion INR

135 Providing & Fixing in position C.P. Brass extension piece 25mm long to 100mm long of approved make (to the approval of ngineer‐in‐charge )with various fixtures complete in all respect. CONCEALED IN WALL: Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes as per IS 15778 (ISI marked with the prior approval of Engineer‐in‐ Charge), having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing including jointing of pipes & fittings, with one step CPVC solvent cement and testing of pipes complete as per direction of Engineer‐in‐ Charge 136

136 b) CPVC SDR 11 Pipe & fitting 20mm o/d 137 Mtr Excess(+) Full Conversion INR

137 c) CPVC SDR 11 Pipe & fitting 25mm o/d 138 Mtr Excess(+) Full Conversion INR

138 d) CPVC SDR 11 Pipe & fitting 32mm o/d 139 Mtr Excess(+) Full Conversion INR

139 Cutting chase in brick walls in cement or in floor for embedding G.I. or C.I pipes line and making good the same to its original condition. B) Size 150 mm x 150 mm 140 Mtr Excess(+) Full Conversion INR

140 Cutting holes upto 23cm square through B.B. in cement walls or stone masonary wall in cement for pipes, and making good the same & finishing according to existing finish where required. 141

141 a) Through wall 11.43 cm thick 142 Each Excess(+) Full Conversion INR

142 b) Through wall 22.86 cm thick 143 Each Excess(+) Full Conversion INR

143 Dismantling concreted) d) Cement concrete plain1:2:4 mix 144 Cum Excess(+) Full Conversion INR

144 Providing and fixing in position singel socket SWR UPVC soil waste or antisyphonagepipes as per IS 13592 of E.D.C manufacture or of any other reputed firm including cutting, jointing, wastage, but excluding cost of jointing. Single Socket Type B 145

145 b) 110mm o/d SWR UPVC pipe lines laid complete 146 Mtr Excess(+) Full Conversion INR

146 c) 90mm o/d SWR UPVC pipe lines laid complete 147 Mtr Excess(+) Full Conversion INR

147 Providing and fixing in position SS Gratingwith frame of approved make (to the approval of engineer in charge) complete in allrespects 148 Each Excess(+) Full Conversion INR

148 Providing and fixing in position SWR UPVC special for soil waste vent or anti syphonage pipes as per as per IS ‐ 14735 including cutting and wastage etc. cutting holes in walls roofs or floors etc. and making good to its original condition but excluding cost of lead joining. b) For 110mm o/d pipes 149

149 v)Elbow 90 Degree (All side socketed) 150 Nos Excess(+) Full Conversion INR

150 vi)Vent Cowls 151 Nos Excess(+) Full Conversion INR

151 viii) Coupler 152 Nos Excess(+) Full Conversion INR

152 xii)Single Y‐Junction with door 153 Nos Excess(+) Full Conversion INR

153 ii) Single Tee With Door 154 Each Excess(+) Full Conversion INR

154 iii) Single Tee 155 Each Excess(+) Full Conversion INR

155 iv) Door Elbow 90 Degree 156 Each Excess(+) Full Conversion INR

156 vii) Reducer 110mm x 75mm 157 Each Excess(+) Full Conversion INR

157 ix) P Trap/Floor Trap 110mm x 110mm 158 Each Excess(+) Full Conversion INR

158 xi) Single Y‐Junction 159 Each Excess(+) Full Conversion INR

159 For 90 mm o/d pipes 160

160 ii) Single Tee With Door 161 Each Excess(+) Full Conversion INR

161 iii) Single Tee 162 Each Excess(+) Full Conversion INR

162 v) Elbow 90 Degree 163 Each Excess(+) Full Conversion INR

163 xi) Single Y‐Junction 164 Each Excess(+) Full Conversion INR

164 Dismantling of wall tiles at any floor of the building, laid in cement mortar including scraping of cement plaster and disposal of malba at a suitable place within a distance of 100 Mtrs of the complex complete in all respect. 165 Sqm Excess(+) Full Conversion INR

165 Dismantling of floor tiles at any floor of the building, laid in cement mortar including dismantling of cement concrete base and disposal of malba at a suitable place within a distance of 100 Mtrs of the complex complete in all respect. 166 Sqm Excess(+) Full Conversion INR

166 12.5 mm thick cement plaster 1:2 167 Sqm Excess(+) Full Conversion INR

167 Providing and fixing 1st quality ceramic glazed wall tiles Matt/Semi Matt/Glosy/Highly Gloss inish/Highlighter/emboss conforming to IS : 15622 (thickness to be specified by the manufacture of approved make in all colours, shades except burgundy, bottle green, black of size 600 x 300 mm as approved by Engineer‐in‐ Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:4 (1 cement:4 fine sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. 168 Sqm Excess(+) Full Conversion INR

168 Base course of floor consisting of 100mm thick cement concrete 1:8:16 and 100mm sand filling using mechanical mixer for mixing of material 169 Sqm Excess(+) Full Conversion INR

169 Providing and laying Anti skid Ceramic floor tiles of size 300x300 mm x 10 mm thick of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on flooring skirting and dado in 12.5mm thick cement plaster 1:3 in base and jointed with @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., completewhite cement slurry in joints including corners angles and beading. 170 Sqm Excess(+) Full Conversion INR

170 Supplying and filling cinder on roof (Ist story) including light ramming 171 Cum Excess(+) Full Conversion INR

171 Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : a) First layer of slurry of cement @ 0.488 kg /sqm mixed with water proofing cement compound @ 0.253 kg/sqm. This layer will be allowed to air cure for 4 hours. b) Second layer of slurry of cement @ 0.242 kg/ sqm mixed with water proofing cement compound @ 0.126 kg/ sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry. Area 172 sqm Excess(+) Full Conversion INR

172 By Manual Means (A) Stone (building or pitching) Sand, Earth, Fly Ash, Bajri, Shingle, Spalls, Brick bats, Brick ballast and Stone metal. 173 Cum Excess(+) Full Conversion INR

173 (i) Earth,Surkhi, Sand, Earth, Fly Ash, Bajri, Ballast, Stone boulders, Kankar and building rubbish, Earth. 0‐6.0 km 174 Cum Excess(+) Full Conversion INR

174 Supply and Erection of Heavy Duty Exhaust Fan (HDEF ) (300mm‐900RPM) Single Phase Of make Crompton Model EXHD300‐6‐1 or its Equivalent Make Havells turbo Force SP/Orient (12" H.D. EX ) ISI Marked Heavy Duty Motor With die Cast Aluminium Motor Mounted On Two Ball Bearing including Erection, Connections and louver Shutter Complete In all Respects 175 Each Excess(+) Full Conversion INR

175 C (ELECTRICAL WORK) 176

176 SURFACE AIR CONDITIONER SUPPLY TERMINAL POINTS (USED FOR HGW, PVC CONDUIT & HDPE PIPE WIRING SYSTEM WITH MODULAR ACCESSORIES): Supply and erection of air conditioner supply terminal point on surface on wall etc., complete with PVC boxes (Plastic on surface boxes) required for suitable number of modules (Modular accessories) for having 25Amp. combined/ universal Socket (shuttered) and modular motor starter 25Amp. (2 Module), covered with Frame Plate etc., & including the cost of above material and other petty material with necessary connections etc.:- (IX) Wiring AC supply terminal point having 1No. 25Amp. universal Socket (shuttered) erected at AC height and 1No. Motor starter 25Amp. erected at switchboard height. 177 3 Each 755.89 Excess(+) Full Conversion INR

177 SURFACE COMPUTER SUPPLY TERMINAL POINTS (USED FOR HGW, PVC CONDUIT & HDPE PIPE WIRING SYSTEM WITH MODULAR ACCESSORIES): Wiring Computer supply terminal points on surface on wall etc., complete with PVC boxes (Plastic on surface boxes) required for suitable number of modules (Modular accessories) for having 6Amp. 2/3 universal socket (shuttered), 16/20Amp. combined/ universal Socket (shuttered), 6/10/16/20Amp. Switches and blanking plate, covered with Frame Plate etc., & including the cost of above material and other petty material with necessary connections etc.:- a) Wiring Computer terminal point having 3 Nos. 6Amp. 2/3 universal socket (shuttered), 1No. 16 Amp. switch with indiicator and 1No. blanking plate 178 2 Each 632.1 Excess(+) Full Conversion INR

178 REPLACEMENT OF WIRES, COVER FRAMES, MODULAR SWITCHES, CONCEALED METAL BOXES AND OTHER ACCESSORIES IN THE EXISTING RECESSED CONDUIT PIPE WIRING SYSTEM (WITH MODULAR TYPE ACCESSORIES) Derived from 34.01: Replacement of PVC insulated copper conductor single core FR cable (ISI marked) overall 1.5sq. mm, 1100volts grade to be laid in existing heavy gauge welded conduit pipe 20 mm/25 mm dia (1.6mm thick) ISI Marked, recessed in wall etc., complete with powder coated/anodized concealed metal boxes (1.6mm thick with Brass lugs) required for suitable number of modules (Modular accessories) for having Step type electronic fan regulators (two module) 100watts, bell push, 6Amp. 2/3 universal socket (shuttered), 16/20Amp. combined/ universal Socket (shuttered), 6/10Amp. Switches, 16/20Amp. switches with indicator etc. and covered with Frame Plate etc., PVC connector (For Fan Box and Call Bell), PVC Bush, bonding to earth with PVC insulated copper conductor single core FR cable (ISI marked) 1sq. mm, 1100volts grade (For 6Amp. wall socket & plug control point) and other petty material etc. including the cost of above material, cutting and filling up of chases (with finishing the surface):- (Derived From CSR 34.01) 179

179 i) Wiring fan point (Without fan box) 180 16 Each Excess(+) Full Conversion INR

180 ii) Wiring light point 181 20 Each Excess(+) Full Conversion INR

181 iii) Wiring call-bell point 182 5 Each Excess(+) Full Conversion INR

182 iv) Wiring 6Amp. wall socket point 183 8 Each Excess(+) Full Conversion INR

183 v) Wiring 6Amp. Plug control comprising wall socket point 184 8 Each Excess(+) Full Conversion INR

184 vi) Wiring 16/20Amp. power plug control point 185 5 Each Excess(+) Full Conversion INR

185 Supply and erection of PVC insulated FR single core Unsheathed copper conductor cable (ISI marked) suitable upto 1100 volts grade confirm to IS:694/1990 left bare in pipe or casing of suitable size complete in all respect as desired by the Engineer-in-charge:- 186

186 i) Overall size 1sq.mm (Un-sheathed) 187 147 P.mtr Excess(+) Full Conversion INR

187 ii) Overall size 1.5sq.mm (Un-sheathed) 188 200 P.mtr Excess(+) Full Conversion INR

188 iii) Overall size 2.5 sq.mm (Un-sheathed) 189 100 P.mtr Excess(+) Full Conversion INR

189 iv) Overall size 4sq.mm (Un-sheathed) 190 200 P.mtr Excess(+) Full Conversion INR

190 v) Overall size 6sq.mm (Un-sheathed) 191 19 P.mtr Excess(+) Full Conversion INR

191 vi) Overall size 10sq.mm (Un-sheathed) 192 60 P.mtr Excess(+) Full Conversion INR

192 XLPE INSULATED UN-ARMOURED CABLES (ON SURFACE): Supply, laying and erection of aluminium conductor XLPE insulated PVC sheathed Un-armoured and served cable 1100 volts grade as per IS 7098 (Part-1)1988 to be laid (On Surface) as per PWD General Specifications:- i) Overall size 6sq.mm (2Core) Un-armoured (On-Surface) 193 80 P.mtr Excess(+) Full Conversion INR

193 PVC, HDPE PIPES & PVC FLEXIBLE PIPES: Supply & erection of PVC Conduit Pipes (ISI marked) as per IS9537:Part-III & HDPE pipes (ISI marked) as per IS:4984:1995 for wiring purposes including bends, junction boxes, Steel hooks, M.S. saddle clamps and other petty materials etc., as per PWD General Specifications:- ii) Heavy Gauge PVC Conduit Pipe 25mm dia. (On Surface) 194 100 P.mtr Excess(+) Full Conversion INR

194 G.I. EARTHING: Earthing with G.I. wire/ rope in G.I. pipe partly recessed and partly on surface complete with 150cm long 50mm dia. G.I. earth pipe (Cutting threads and 36 Nos. holes, 1cm dia. to make a mesh around the GI Pipe) with G.I. reducing socket including erection of the same, 4.50 metre (14.76 feet) below ground level with 20Kg. charcoal & salt mixture etc., up to 8 metre in length (including boring & refilling). a) Earthing with 8 S.W.G. (4mm dia.) G.I. wire in 15mm dia G.I. pipe with G.I. reducing socket 50mm x 15mm (upto 8Metre in length) 195 2 Each Excess(+) Full Conversion INR

195 G.I. EARTHING WIRE/ ROPE (AS ADDITIONAL LENGTH): Fixing additional length of earthing with G.I. wire/ rope in G.I. pipe (On Surface) with sockets, elbows and MS saddle clamps including painting etc. A) Additional length G.I. wire 8 S.W.G. (4mm dia.) in 15mm dia. G.I. pipe (On Surface) 196 20 P.mtr Excess(+) Full Conversion INR

196 SUPPLY AND ERECTION OF WIRING ACCESSORIES: Supply and erection of switches, sockets and other accessories (flush piano type/ modular accessories) in the existing bakelite/ modular cover frame including fixing & connections and petty material etc.:- 197

197 i) One Way 6amp. Switch Flush Piano type 198 45 Each Excess(+) Full Conversion INR

198 ii) Two Way 6amp. Switch Flush Piano type 199 4 Each Excess(+) Full Conversion INR

199 iii) Single Pole 16/20amp. Switch with indicator Flush Piano type 200 10 Each Excess(+) Full Conversion INR

200 iv) One Way 6amp. Bell Push 201 2 Each Excess(+) Full Conversion INR

201 v) 5pin 6amp. Wall Socket Flush Piano type 202 22 Each Excess(+) Full Conversion INR

202 vi) 16amp. Universal Wall Socket Flush Piano type 203 10 Each Excess(+) Full Conversion INR

203 vii) Step type Fan Regulator Flush Piano type (Switch size) 204 30 Each Excess(+) Full Conversion INR

204 viii) Step type Fan Regulator Flush Piano type (Socket size) 205 10 Each Excess(+) Full Conversion INR

205 xxvii) Bakelite Batten Holder (Large size) 206 10 Each Excess(+) Full Conversion INR

206 MINIATURE CIRCUIT BREAKERS: Supply and erection of Miniature Circuit Breaker MCB's for circuit protection against overload and short circuit current fault suitable for 240/ 415 volts 50cycles AC supply with breaking capacity of 10kA, Curve-C and low watt losses as per IS/IEC 60898-1, energy limitation class-3, true contact indication, label holder facility in the existing MCB distribution board as per PWD General Specifications including connections with suitable size of thimbles/lugs:- 207

207 ii) MCB Single Pole 6-32amp. (10kA, Curve-C) 208 20 Each Excess(+) Full Conversion INR

208 vii) MCB Double Pole 40amp. (10kA, Curve-C) 209 2 Each Excess(+) Full Conversion INR

209 xvi) MCB Four Pole 50, 63amp. (10kA, Curve-C) 210 2 Each Excess(+) Full Conversion INR

210 SHEET METAL DOUBLE DOOR DISTRIBUTION BOARD FOR MCB's/ RCBO's/ RCCB's: Supply and erection of sheet metal Double Door Distribution Boards IP 43- IK09 metal door (dust protected) as per IS 8623-1&3, IEC 61439-1&3 suitable for flush mounting with fully insulated copper busbars, shrouded neutral bars, earth bars, cement spill protector, color- coded interconnecting wire set, cable ties, blanking plates and circuit identifications label and of required no. of ways for mounting miniature circuit breakers/ RCBO's/ RCCB's in the distribution board (For SP&N distribution board with provision DP MCB's/ RCCB's/ RCBO's as incomer and SP MCB's as outgoings and for TP&N horizontal distribution board with provision TPN/ FP MCB's/ RCCB's/ RCBO's as incomer and SP MCB's as outgoings) as per PWD General specifications including connections with suitable size of thimbles and bonding to existing earth etc:- 211

211 ii) SP&N Double Door Distribution Board 8 way each 212 1 Each Excess(+) Full Conversion INR

212 v) TP&N Horizontal Double Door Distribution Board 4 way each 213 1 Each Excess(+) Full Conversion INR

213 a) SINGLE ARM BRACKETS FOR GI PIPE POLE: Supply and erection of G.I. Pipe (A-Class) Single arm bracket of suitable length to give a total overhang at a tentative angle of 100/105º, the bracket should be fixed on the existing surface/ wall with 2nos. MS flat clamp 25mm x 5mm, 30cm long and 4nos. fastner 10mm x 75mm long with two coats of an approved aluminium paint complete in all respect as approved by the Engineer-in-charge at site:- a) Single Arm Bracket 1 metre Long G.I. Pipe 40mm Dia. 214 4 Each Excess(+) Full Conversion INR

214 Supply and erection of BEE 3-Star rating AC Ceiling Fan 1200mm (48") suitable for 230 V single phase with double ball bearing, copper wound, full aluminium body, 3Nos. of blades, white in colour. The mounting type is down rod mount. The product should possess a minimum air deleivery of 210 CMM (approx.). The rated speed of the the product must be minimum of 300 revolutions per minute and 5Nos. of speeds. The product should have a manufcaturer's guarantee /warranty of minimum 2 years. The product should be complete in all aspects with fan motor, bladeset, down rod, conopy set, shackle kit, twisted wire etc., including erection & testing of ceiling fan having connection with PVC insulated PVC sheathed two single core copper conductor (FR) cable 0.75 sq. mm complete in all respects as per satisfcation of the Engineer in-charge at site. 215 15 Each Excess(+) Full Conversion INR

215 Supply and erection of LED batten 40watt LED (including LED driver) with High quality extruded aluminium with efficacy of LED fixture with erection of the same with connections, testing etc. complete in all respects as approved and desired by the Engineer-in-charge at site.CD). The certification and Specification of the LED fitting should be as approved by O/o Advisor(Technical) , Govt. of Punjab vide Letter no. AT/2021/GL/1410-1422 Dated 06/05/2021. 216 70 Each Excess(+) Full Conversion INR

216 Supply and erection of LED batten 20watt LED (including LED driver) with High quality extruded aluminium with efficacy of LED fixture minimum 100 lumens per watt and operating voltage between 140 to 270 volt, input AC frequency 50 Hz ± 3 % complete along with erection of the same with connections, testing etc. complete in all respects as approved and desired by the Engineer-in-charge at site.The certification and Specifications of the LED Fitting's should be as approved by O/o Advisor (Technical), Govt of Punjab vide Letter no.AT/2021/GL/1410-1422 Dated 06/05/2021. Besides this the lighting fixture manufacturer should have inhouse NABL accredited lab. 217 10 Each Excess(+) Full Conversion INR

217 Supply and erection of Heavy duty Exhaust Fan 300mm, 900RPM with aluminium louver shutter, double ball bearing longer life including flexible wire & petty material etc. for connections and testing complete in all respect as approved and desired by the Engineer in-charges at site. 218 3 Each Excess(+) Full Conversion INR

218 Supply and erection of LED Flood Light 50watt (including LED driver),Pressure Die cast aluminium with efficacy of LED fixture more than 100 lumens per watt and operating voltage between 140 to 270 volt, input AC frequency 50 Hz ± 1 % complete along with erection of the same with connections, testing etc. complete in all respects as approved and desired by the Engineer-in-charge at site.The certification and Specifications of the LED Fitting's should be as approved by O/o Advisor (Techlical), Govt of Punjab vide Letter no. AT/2021/GL/1410-1422 Dated 06/05/2021. Besides this the lighting fixture manufacturer should have inhouse NABL accredited lab. 219 4 Each Excess(+) Full Conversion INR

219 Supply and erection of LED Flood Light 80w (including LED driver) in aluminium pressure die cast housing with toughned glass cover (IP66 Protection) and secondary lenses with IP66 protection having efficiency of LED fixture minimum 120 lumens per watt and operating voltage between 140 to 270volt, input frequency 50Hz + 3% complete along with erection of the same with connections, testing etc. Flood light should install on existing parapet complete in all respects as approved and desired by the Engineer-in-charge at site. The certification and Specification of the LED fitting should be as approved by O/o Advisor(Technical), Govt. of Punjab vide Letter no. AT/2021/GL/1410-1422 Dated 06/05/2021.Besides this the lighting fixture manufacturer should have inhouse NABL accredited lab. 220 4 Each Excess(+) Full Conversion INR

220 Supply, erection, testing and commissioning of pure sine wave inverter 2000VA, 24V with 24 month warranty with Trolley for two tall tubular batteries, connections and testing etc. complete in all respect as approved and desired by the engineer incharge at site. 221 1 Each Excess(+) Full Conversion INR

221 Supply, erection, testing and commissioning of12 Volt. 200 AH Tall tubular battery with warranty 36 months including connections and testing etc. complete in all respect as approved and desired by the engineer incharge at site. 222 2 Each Excess(+) Full Conversion INR

222 Less Cost of Old Dismantlled Material 223 1 LS Excess(+) Full Conversion INR

Total in Figures

Quoted Rate in Figures Select

Please Enable Macros to View BoQ information