Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹26.2 LAccepted-AOC | L1 | Accepted-AOC The lowest bidder | |
| 2 | L2₹27.3 L+₹91,788 (3.48%)Rejected-AOC PLOT NO 407 HIMSHIKHA PINJORE PANCHKULA HARYANA 134102 | PANCHKULA | HARYANA | 134102 | L2 | Rejected-AOC Other than the lowest bidder | |
| 3 | L3₹28.6 L+₹2.2 L (8.36%)Rejected-AOC | L3 | Rejected-AOC Other than the lowest bidder | |
| 4 | L4₹33.8 L+₹7.5 L (28.3%)Rejected-AOC H NO 1395 SECTOR 21 PANCHKULA 134112 HARYANA | PANCHKULA | HARYANA | 134112 | L4 | Rejected-AOC Other than the lowest bidder |
Tender Value
₹32.5 L
EMD Value
₹64,920
Closing Date
1 Feb 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (I) JUTOGH
GE (I) JUTOGH, JUTOGH CANTT SHIMLA - 171008
ADDL/ ALTN TO BLDG NO P-61 AND T-60 AT MIL STN KALKA UNDER GE (I) JUTOGH
2022_MES_570703_2
GE/JUT-57 OF 2022-23
Open Tender
Civil Works
Item Rate
180 days
KALKA
CLASS D CATEGORY a (i)
7 documents required · 7 mandatory
₹500
GE (I) JUTOGH
₹64,920
Yes
16 Feb 2023
12 Jan 2023
3 Feb 2023
12 Jan 2023
1 Feb 2023
18 Jan 2023
Amount
Taking down cement or lime plaster of any discreption on brick or concrete walls including raking out joints, hacking for key scrubing down with water complete all as specified and directed.
M & L for rendering 15mm thick on other than fair faces of brick work or concrete surface in CM 1:6 surface finished even and smooth without using extra cement, at any height complete all as specified and directed.
M&L for 15 mm thick rendering in CM 1:4 on brick work or concrete surfaces, surface finished even and smooth without using extra cement complete all as specified and directed.
M&L for chipping of loose/ damaged / cracked / previously repaired/ weak concrete by chieseling to expose the sound core concrete where ever required and to expose rusted reinforcement upto depth n.exc 50mm , cleaning of reinforced concrete surface by air compressor, complete all as specified and directed.
M&L for :- (i) Removing loose and broken concrete by chieseling/ mechanically etc up to a depth of 40mm from soffit of slab,column,beam, chajja and similar structural members, cutting edges, cleaning the dismantled portion with wire brush etc to make the reinforcement naked and remove dust /dirt/other foreign article etc complete all as specified and directed. (ii) Applying IPH RB-107 polymer based rust -remover(pH value-12) and applying IPH RB-167 Polymer based rust preventive (pH value-9) to all exposed reinforcement bars complete all as specified and directed. (iii) Applying polymer modified cement mortar rendering 15mm average thickness in CM 1:3 on guinted surface duly mixing polymer modified 'Nitoband AR' of make : M/s Fosroc Chemicals India (P) Ltd@ 10 Ltr per bag of cement or equivalent in Harjas Coatings & polymers @ 5% by wt of cement or equivalent make in Dr Fixit of Pidilite Industries complete finished even & smooth without using extra cement all as specified and as per manufacturer's instructions.
M&L for 5mm thick rendering in CM 1:3 on concrete surface of ceiling finished even and smooth without using extra cement, complete all as specified and directed.
M&L for preparation of new plastered surface of wall and applying two coats of distemper oil emulsion complete all as specified and direceted.
M&L for preparation of new plastered surfaces of walls and applying two coats of cement base paint over a coat of primer on walls complete all as specified and directed.
M&L for applying three coats white wash on new plastered surfaces of ceiling, including preparation of new surfaces, complete as specified and directed.
M&L for complete removal of existing treatment from walls and applying two coats of cement base paint, over a coat of primer with alkali resistant priming paint on walls complete all as specified and directed.
M&L for preparing old treated plastered surface of ceiling and applying two coats of white wash complete all as specified and directed
M&L for complete removal of existing treatment from walls and applying a coat of 1-2mm thick wall care putty as per manufacturers instructions complete all as specified and directed.
M&L for preparation of plastered surface of wall (old and new) and applying two coats of oil bound distemper over and including chalk whiting priming coat complete all as specified and directed.
Demolition of cement concrete un-reinforced in ground floors and pavings n exc 15 cm thickness (below or above ground level, complete all as specified and directed.
Demolition of reinforced cement concrete in roofs, floor (other than ground floors) beams, stair case chhajja etc (reinforcement cut as required to facilitate demolition) complete all as specified and directed.
Dismantling, floor hearth or wall tiling including cement mortar bedding but not backing and removing rubbish off the premises complete all as specified and directed.
Use and waste of Formwork to chajjas/ shelves/ slab and similar items for fair finish surface complete all as specified and directed.
M&L for RCC 1:1.5:3 type A-1 (using 20mm graded stone aggregate) chajja/shelves and like complete all as specified & directed.
M&L for PCC 1:2:4, type B-1, using 20mm graded crushed stone aggregate as in coping, benching cills, roof kerb, seismic and other similar bands and the like including weathering slightly rounded or chamfered angles and throating as directed including necessary form work complete all as specified and directed.
M&L for pre-cast cement concrete solid blocks, 1:3:6, type C-1, using 20 mm graded crushed stone aggregate set in cement mortar 1:4 complete all as specified and directed.
M&L for 50mm thick PCC 1:2:4 type B-1 (using 20 mm graded crushed stone aggregate) as in floor finished even and smooth without using extra cement complete all as specified and directed.
M&L for 75mm thick PCC 1:3:6, type C-2, using 40mm graded crushed stone aggregate as in plinth protection, finished concrete surfaces even and smooth without using extra cement, complete all as specified and directed.
M&L for Non Skid coloured ceramic tiles 7 to 8mm thick (squares/rectangular) area of each tile of size 600x600mm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and incl 15mm thick screed bed in CM 1:6, complete all as specified and directed.
M&L for Non Skid coloured ceramic tiles 7 to 8mm thick (squares/rectangular) area of each tile of size 600x600mm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and incl 10mm thick screed bed in CM 1:4, complete all as specified and directed.
M&L for Non skid ceramic coloured tiles square/rectangular of 7 to 8mm thick, area of each tile exceeding 0.06 sqm but not exc. 0.11 sqm as in floor etc. set and jointed in neat cement slurry and pointed in white cement mixed with colour pigment to match the shade of tiles incl screed bed of 15 mm thick in CM (1:6) complete all as specified and directed.
M&L for Non Skid ceramic coloured tiles 7-8 mm thick (square/rectangular) area of each tile ecx 0.11 sqm but n.exc 0.18 sqm as in skirting/dado etc. set and jointed in neat cement slurry and pointed in white or coloured cemeent to match fixed over and including 10mm thick plaster in CM (1:6) complete all as specified and directed.
M&L for 18-20 mm thick machine cut pre polished kota stone slab as in flooring over and including 20mm thick screed bed in CM (1:4), laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including necessary grinding, rubbing, rounding to exposed edges and polishing complete all as specified and directed.
M&L for 16-18 mm thick machine cut pre polished kota stone slab as in skirting/dado fixed over and including 10mm thick rendering in CM (1:4), laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including necessary grinding, rubbing, rounding to exposed edges and polishing complete all as specified and directed.
Dismantling wall and ceiling boards (fibre, pulp, insulation etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and directed.
M&L for GI frame work (bottom prepainted and puetyelene coated) of size 605 x 605 mm for seamless ceiling comprising of GI perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx. 900 mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457mm centre to centre complete all as specified and directed.
S&F hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and directed.
M & L 4mm thick 600x600mm non asbestos fibre cement building boards (self design) fixed or laid /inserted to timber/GI/Aluminium frame work with screws in ceiling flat or sloping complete all as specified and directed.
M&L for glazed ceramic coloured tiles of size 350x250x7mm thick/450x350x7 mm thick fixed over and including 10mm thick screed bed in CM 1:4 on vertical surface such as skirting/dado set and jointed in neat cement slurry and pointed in white cement mixed with colour pigment to match the existing surface complete all as specified.
S&F in repair 25 mm dia drapery rod , mild steel, powder coated with fixing brackets ,end knobs ,stop, etc. Complete all as specified and directed.
Demolition of brick or stone masonary built in cement mortar including all quoins arches pillars etc but excluding ashlars facing dressed stone work and precast concrete block, complete all as specified and directed.
M&L for brick work with subclass 'B' bricks, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6, complete all as specified and directed.
M&L for brickwork with sub-class 'B' bricks, straight or curved on plan to any radius in half brick thick walls, built in cement mortar 1:4 complete all as specified and directed.
Taking down chowkats or frames with shutter not exc 1.5 sqm (without taking off shutters from frames) and removing from site including making good the distrurbed surfaces complete all as specified and directed.
Taking down chowkats or frames with shutter exc 1.5 sqm but n exc 4.0 Sqm each (without taking off shutters from frames) and removing from site including making good the distrurbed surfaces complete all as specified and directed.
Taking down shutters exc 1.0 sqm but n exc 2.0 Sqm each and removing from site site including making good the distrurbed surfaces complete all as specified and directed.
S & F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed.
S&F Factory made solid panel pvc door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded palin colour PVC `C' channel heaving a PVC sheert strip of 20mm width suck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bbottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed.
S&F PTMT tower bolt, 200mm long, fixed with steel screws with brass/bronze hinge pin complete all as specified and directed.
S&F PTMT butt hinge, 100mm long, fixed with steel screws with brass/bronze hinge pin complete all as specified and directed.
S&F PTMT handle 125mm long fixed with steel screws complete all as specified and directed.
S&F pressed steel frames (made of 1.25 mm thick sheet) for doors of size 125x60mm for door and window frames with double rebate including lock strike plate, shock absorbers, 20mm dia 60mm long MS conduit for housing of a drop bolt, butt hinges, hold fasts/ lugs etc and treating of internal surfaces of chowkhats and hold fasts/ lugs with a coat of coal tar or black paint incl hinges, hold fasts/lugs etc. complete all as specified and directed.
S&F pressed steel frames (made of 1.25 mm thick sheet) for doors of size 105x60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc, complete all as specified and directed.
S&F pressed steel frames (made of 1.25 mm thick sheet) for doors of size 75x60mm for door and window frames with double rebate including lock strike plate, shock absorbers, 20mm dia 60mm long MS conduit for housing of a drop bolt, butt hinges, hold fasts/ lugs etc and treating of internal surfaces of chowkhats and hold fasts/ lugs with a coat of coal tar or black paint incl hinges, hold fasts/lugs etc. complete all as specified and directed.
M&L PCC 1:3:6, type C-1, using 20mm graded crushed stone aggregate as in filling back of pressed steel frame complete all as specified and directed
S&F 2nd class hard wood factory made paneled shutters 35mm thick (two panel) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces the size of rails and stiles as per IS 1003 (part-I) kiln seasoned and chemical pressure treated complete all as specified and directed.
S&F 35mm thick (factory made) glazed and skeleton shutter of IInd class hard wood, open rebated and prepared to receive glass gauge etc (without sash bars) edges of framing plain, chamfered or rounded fitted with cut and mitered beads for securing glass/gauze etc, sizes of members of shutters as specified in SSR part I section 8 clause 8.24 (a) complete all as specified and directed.
Dismantling of boarding any description, fixed in any position with nails for cupboards complete all as specified and directed.
S&F 18/19mm thick prelaminated particle board, interior grade, both side with decorative choice lamination, fixed with screws to timber frame work as in cup board shutter/ shelves etc complete all as specified and directed.
Extra over rates of block board or veneered particle board for external teak wood lipping, 6mm thick fixed with nails complete all as specified.
S&F Hasp and staple 100mm safety type, aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed.
S&F aluminium handles, cast type, anodised 100mm size compete all as specified and directed.
S&F 150 mm, MS ordinary door spring incl roller& roller plate & welding if necessary complete all as specified.
S&F 125mm long extruded aluminium alloy handle fabricated type anodized complete all as specified and directed.
S&F 200 mm aluminium anodised barrel tower bolt of extruded section and fixed, compete all as specified and directed.
S&F 300 mm long aluminium alloy, anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and directed.
S & F factory made box type glazed and gauged steel window with side hung shutter including projecting type hinges with steel handle and steel peg stay complete dovetailed or welded complete all as specified and directed.
S&F steel window or ventilators, fixed type, with galzing bar complete all as specified and directed.
Hacking out old broken glass (any thicknesss, size,quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed.
S&F sheet glass 3mm thick ordinary quality and glazing with oil putty or wooded bead/aluminium clip built in squares not exceeding 0.5 sq.m in each pane, complete all as specified and directed.
S& F stainless steel wire cloth 0.36mm nominal dia or wire and average width or aperture 1.4mm and fixed with stainless steel wire staple in complete all as specified and directed.
S&F framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars, barred iron doors, ladder, framed baluster, walk ways, railing, framework of watertanks staging and similar work conforming to Fe-290. Gde-E-165 compete all as specified and directed.
M & L for preparation of new or previously untreated steel surfaces of any descirption not otherwise described over 10cm width or grith and applying two coats of synthetic enamel paint over shop coat of red oxide primer complete all as specified and directed.
M&L for applying two coats of synthetic enamel paint over a coat of red oxide primer on new or previously untreated steel surfaces of any description over 10cm wide or girth incl preparation of surface etc., compete all as specified and directed.
M&L for preparation of old steel/wooden surfaces of any description over 10 cm width & girth not otherwise described and applying two coats of synthetic enamel paint, complete all as specified and directed.
Taking up or down 15mm bore steel water tubing and connections incl cleaning for refixing or removal from site of 15mm bore complete all as specified and directed.
Taking up or down 20mm bore steel water tubing and connections incl cleaning for refixing or removal from site o complete all as specified and directed.
S & F 15mm bore galvanised steel water tubes medium grade with all fittings and fixed to walls and ceilings or laid in floor complete all as specified and directed.
Re-fixing old steel tubing 15 mm bore with new fittings and connections in new or old positions, complete all as specified and directed.
S & F 20mm bore galvanised steel water tubes medium grade with all fittings and fixed to walls and ceilings or laid in floor complete all as specified and directed.
Re-fixing old steel tubing 20 mm bore with new fittings and connections in new or old positions, complete all as specified and directed.
Supply and fixed in repair of vitreous china squatting pan ‘Orrisa pattern’ size 580 x 440 mm white with integral foot rest including replacement of ‘P’ or ‘S’ CI trap, lime concrete bedding and making good floor complete all as specified and directed.
S & F vitreous China wash down (EWC) water closet pan (pedestal pattern), white (excluding flushing cistern and flush pipe) but including plastic water closet seat cover closed pattern with flat bottom and cover with PVC hing devise, fixing bolt for pedestal pattern and cast iron 'P' or 'S' trap complete all as specfied and directed.
S & F in repair 10 ltr capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with intel, ball valve, float, flush pipe and handle including brackets complete all as specified and directed.
S&F vitreous China wash hand basin, white, flat back size 550 x 440mm including CP brass waste coupling, 600 mm long 32mm bore HDPE waste down pipe including CI brackets complete all as specified and directed.
S & F 15mm pillar tap CP cast copper alloy with capstan head screwed down high pressure with or without lettered hot or cold with long shank and fly nuts fancy type complete all as specified and directed.
S&F shelf of PTMT fixed with and including CP brass screws and wooden/plastic cleat (minimum wt-300gm) complete all as specified and directed.
S & F stop valve concealed of 15 mm bore cast copper alloy fancy type chromium plated screwed down high pressure with crtuch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified and directed.
S & F in repair brass chrominum plated shower rose 125mm size and 30cm long CP brass pipe with or without swivel joint incl fixing to steel pipe of size 15mm bore complete all as specified and directed.
S & F in repair 15mm bore bib tap brass long body fancy type chromoim plated long body cast copper alloy with crutch or butterfly handle screwed down secrewed for iron pipe or for brass ferrule complete all as specified and directed.
S&F 60 cm long (PVC connection) 15 mm bore with PTMT nut complete all as specified and directed.
S&F in repair PVC(SWR) pipes, 110mm dia single socketed in any length with rubber ring joints laid in trenches or in floor complete all as specified and directed
S&F in repair 110mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall with PVC clamp and holder bats complete all as per specified and directed .
S&F in repair 110 mm dia PVC (SWR) bends with access door complete all as specified and directed.
Disconnecting/ Refixing of rotational moulded polyethylene 1000 Ltrs capacity water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position on existing location, complete all as specified and directed.
S&F in repair 110 mm dia PVC (SWR) bends complete all as specified and directed.
S&F MS TMT bar 10mm dia & over, cut to length bent to shape required including cranking, bending spirally for hopping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.
S&F MS TMT bar 6mm to 8mm dia cut to length bent to shape required including cranking, bending spirally for hopping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.
Dismantling of brick tiles or terracing tiles, single layer on roofs, incl cleaning of bricks/ tiles and removal of unserviceable from site, incl wire brushing and cleaning the roof surface with water, incl flashings and junction of parapets, etc., complete all as specified and directed.
Demolition of mud in roofs, any thickness, including plastering and leeping (whether full thickness removed or only a part thereof) complete all as specified and directed.
M&L for PCC 1:2:4, type B-1, using 20mm graded crushed stone aggregate as in roof kerb or mud stops, padding on roof etc and the like complete all as specified and directed.
M&L for old brick tiles retrived from dismantling 40mm thick laid on 20mm thick screed bed of CM (1:6) and joints grouted flush in cement mortar (1:3) mixed with 5% of crude oil by weight of cement and pointed flush as the work proceeds complete all as specified and directed.
M&L for brick tiles 40mm thick laid on 20mm thick screed bed of CM (1:6) and joints grouted flush in cement mortar (1:3) mixed with 5% of crude oil by weight of cement and pointed flush as the work proceeds complete all as specified and directed.
M&L for screed bed for laying/ rendering 15mm thick in cement mortar 1:4 on concrete/ roof slab, surfaces finished even and smooth without using extra cement mixed with water proofing compound of approved make as per manufacturers instructions complete all as specified and directed.
Supply only integral water proofing compound complete all as specified and directed.
M&L for roof treatment by cleaning of roof slab surfaces including sweeping clean and washing down with water to remove dust & providing water proofing treatment with polymeric standard water proofing membrane complete all as specified and directed as under : (a) M&L preparation of plaster surfaces /RCC roof surfaces and applying one coat of oil bound bituminous primer @ 0.30 Ltr/sqm (b) Supplying and laying modified polymeric water proofing membrane super thermo 3mm thick of weight not less than 3kg /sqm reinforced with polyester non woven fabric weight not less than 150gm/sqm center core including coping on the surfaces with torch application of membrane with 10cm over laps as required. (c) Applying one coat of bitumen 85/25 @1.2 kg/sqm (d) Applying two coats of aluminium paint @ 0.20 kg/Sqm Note:- The work of water proofing treatment shall be got executed through expert team of manufacturers or authorised applicator of manufacturer.
M&L for pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws compete all as specified and directed.
M&L for mild steel as in framed work as in doors or gates of angle or other section with gusset plates, rails, braces,etc., complete, drilled for fixing of steel sheeting or other covering doors, etc., to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings and hanging; also fastening and fixing conforming to Fe-290 Gde E-165 complete all as specified and directed.
M&L 75mm thick PCC 1:4:8 type D-2 using 40 mm graded crushed stone aggregate as in sub base complete all as specified and directed.
M&L for rubber moulded coloured, chequered cement concrete tiles pre polished lacuqer and glossy finish 30cmx30cmx22-25mm thick, set , jointed and pointed in neat cement slurry with grey cement and pigment in floors fixed over and including 15mm thick screed bed in CM (1:6) as in sub base of floor complete all as specified and directed.
Taking down carefully aluminium point wiring (light, Socket or power) complete including fittings and fixtures such as switches, ceiling roses pendents, regulators, sockets etc for taking credit to be measured separetly including making good the disturbed portion/surface complete all as specified and directed
M&L for point wiring with colour coding multistranded copper conductor cable, PVC insulated (FRLS) and unsheathed size 1.5 sqmm with PVC Conduit with fixing accessories for one light /fan/bell point controlled by one switch with pressed steel concealed terminal boxes covered with 3mm thick laminated sheet incl. continuous earth wire of PVC insulated unsheathed multi stranded copper conductor cable size 1.5 Sqmm for earth wire connected to common earth dolly all as specified and directed.
All as per item No 107.00 here-in-before but for one 3/5 pin socket 5 Amp on same board with 1.5 Sqmm wire and 1.5 Sqmm earth wire, complete all as specified and directed
All as per item No 107.00 here-in-before but for one 3/5 pin socket 5 Amp on independent board with 1.5 Sqmm wire and 1.5 Sqmm earth wire, complete all as specified and directed
All as per item No 107.00 here-in-before but for 3 pins socket outlet 15A independent with 2.5 sq mm wire and 2.5 sqmm earth wire complete all as specified and directed.
S&F switch piano flush type, 5 Amps, single pole one way complete all as specified and directed
S&F Socket outlet 2 in 1, 3 pin, 5A (multi purpose) complete all as specified and directed
S&F Socket outlet 2 in 1, 3 pin, 5/15A (multi purpose) complete all as specified and directed
S&F switch piano flush type, 15 Amps, single pole one way complete all as specified and directed
S & F electronic fan regulator step type, 230V, AC, complete all as specified and directed.
S&F ceiling rose, PVC/ Polycarbonate isolated body, surface backlite, 65x50mm three terminals complete all as specified and directed
S&F batten holder PVC/ Polycarbonate type with base/ back plate suitable for LED Lamp, incl 9 watt LED bulb, B-22, pin type 230 Volts, complete all as specified and directed
S&F in replacement of sheet metal enclosures for MCB DB TPN 4 way double door type with 200 amp rated bus bar, complete all as specified and directed.
S & F single pole and neutral sheet steel powder coated distribution board for MCBs fitted with bus bar , neutral link, earth bar and din rail suitable for use on 240 V, 50 Hz supply double door SP&N DB system 8 ways concealed in wall including taking down old unserviceable DB's complete all as specified and directed.
S & F single pole and neutral sheet steel powder coated distribution board for MCBs fitted with bus bar , neutral link, earth bar and din rail suitable for use on 240 V, 50 Hz supply double door SP&N DB system 4 ways concealed in wall including taking down old unserviceable DB's complete all as specified and directed.
S&F MCB TPN 40 to 100 amp rating 415V, 10KA, B-Curve incl all terminals and fittings etc., complete as specified and all as directed.
S&F MCB SPN 40-63 amp rating 240V, 10KA incl all termnials, fitting etc incl taking down old complete all as specified and directed.
S&F MCB SP 6-40 amp rating 240V, 10KA incl all termnials, fitting etc incl taking down old complete all as specified and directed.
M & L for earthing complete with galvanised steel earth plate electrode 600 x 600 x 6.0 mm thick burried directly in gorund (earth pit not less than 2.25 Mtr normal ground level),and top edge of earth plate not less than 1.5 mtr below normal ground level, connected to galvanised means of earth wire 4 mm dia with bolts, nuts & check nuts, and washers of galvanised iron protection pipe light grade of 20 mm dia and watering pipe medium grade of 20 mm dia and filled with alternate layer of charcoal and common salt, watering funnel with wire mesh, earth pit chamber and cover CI frame PCC 1:3:6 type C-2 all as shown in electrical plate No-3 of SSR part-I of 2009 connected to earthing test point including all earth work excavation, returning filling and disposal of surplus soil and testing on completion all as specified and directed.
M&L for submain wiring with two run of single core 6 Sqmm PVC insulated FRLS sheathed copper cable connecting to common earth dolly drawn in and incl PVC rigid conduit 20mm dia with all necessary fittings and accessories and one run of PVC insulated and unsheathed single core cable with copper conductor of size 6 Sqmm as earth wire (green colour) incl taking down existing unserviceable wiring, with all accessories complete all as specified and directed. Note: Two run of 6sqmm cable and 1 Run of 6sqmm wire and one Run of PVC Conduit shall be measured as One RM
S&F LED bulkhead luminaire 10W decorative type as per sample complete and including taking down existing fittings complete all as specified and directed. Make : BAJAJ cat part no: BIBWP 10W LED/ Polycab cat part no:60 BHE 10W 60/ CG cat part no : LBHE-10-CDL/ Havells Cat Part No RUGBYNEONFT10WLED860SSYMTOPC or equivalent in Appx 'A' list of makes .
S&F in repair LED mirror light 10 watt with diffuser, decorative type with driver duly electrical connection from ceiling rose to fittings ccomplete all as specified and directed. Make : Havells cat part No ENDURALINEARNEOBS10WLED865SPCWH/ Polycab Cat Part No. LDO0103021/ Crompton Cat Part No. LCCLB-08-CDL or equivalent in Appx 'A' list of makes.
S & F in repairs LED tube light along with fixture, 20W(4 feet) wall mounted LED batten, extruded PVC, heat sink provided for efficient heat dissipation & integrated electronic driver, optics diffused, complete all as specified and directed. Make : BAJAJ cat part no:BCLSB 20 WH/ Polycab cat part no: INTENSO LXS LED BATTEN 4 FEET 18W/ CG cat part no : LCTL-18-CDL or equivalent in Appx 'A' list of makes .
S.R.SHARMA & SONS
JASWANT SINGH ANAND
R B TRADERS
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .