Improvement to the existing AE OM South Perambalur Office building by Replacing Doors Windows and Providing Water Supply Arrangements to the both existing AEO MSouthPerambalur and AEEOM RuralPerambalur

Dismantling the existing Doors and Windows including removal of frames, hinges and fastenings disposing the wooden scrap materials 1 Km away from the site including cost of all labour charges , lead, lift, T&Ps etc., complete and as directed by the Engineer incharge of the work .

Supplying Mild steel Grills for windows, ventilators, etc., including cost of all materials, labour, lead, lift, T&Ps , priming coat and transport etc., complete and as directed by the Engineer incharge of the work.

Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) windows of casement type (open) from the profile the size of outer frame 60mm x 58mm and shutter profile are reinforcement with GI/1mm 125GSM and 100% corrosion free, the profiles are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with over all the edges of frame and shutter the shutter will be provided with Espag multi power point locks and also it operates as handle. The corners and joints should be welded and cleaned. Radiations free pin headed plain or brown colour glass 4mm thick should be provided to the shutter and it should not allow leakage of water even at most ranging storms and should have key lockable action, security protective hinges, strong locking systems and as per size for arresting noise and energy loss. The connecting mechanism between sash and outer frame that enables opening of the window. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The window should be got approved from the ExecutiveEngineer before use on work

Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Louvered Ventilators of from the profile the size of outer frame 60mm x 58mm and shutter profile size of 60 x 78mm both profiles are reinforced with GI/1mm 125GSM and 100% corrosion free, the profile are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with all over the edges of frame and shutter. The corners and joints should be welded and cleaned. Radiations pin headed glass 4mm thick should be provided in the louvers. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The ventilator should be got approved from the Executive Engineer before use on work

Supplying and fixing of New Solid PVC Door Shutters using 19 Gauge 19mm MS square tubes for styles and outer frames. 15mm MS square tubes for top, lock and bottom rails. The steel tubes shall be covered with 5mm thick solid PVC Sheets. Shutter using 5mm thick solid PVC Sheets for panelling shall rigidly fixed in position including necessary furniture and fittings. The over all size of styles shall be 50mm x 30mm. The over all size of top rail, lock rail and bottom rail shall be 75mm x 30mm. The over all size of frames shall be 50mm x 45mm with suitable rabate for housing the shutter and including cost of all materials, labour, lead, lift, T&Ps etc., complete as directed by Board Engineer at site.

Supplying and fixing of wash hand basin of size 550mm x 400mm with all accessories such as cast iron brackets , 32mm dia C.P. waste coupling, rubber plug and chain, 32mm dia “ B “ class G.I. waste pipe, 15mm dia G.M. wheel valve , 15 mm dia nylon connection, 15 mm dia brass nipples, 15 mm C.P. pillar tap etc., including cost of all materials, labour lead, lift, etc., complete.

Supplying and fixing best quality of mirror of size 600x450mm mirror with SS soap tray, 600 mm SS towel rod, screws and fixing near the wash basin teak wood round block including cost of all materials, labour, lead, lift, T&Ps etc., complete and as directed by the Engineer incharge of the work.

Supplying and fixing of PVC pipe of 110 mm dia, 6 kg / cm2 with necessary, leads, lift, T&Ps etc complete and as directed by the Engineer incharge of the work.

Supplying and fixing in position of 25mm dia UPVC pipes (schedule-40) with ISI monogram with necessary clamps and adhesive solution, etc., including cost of materials,labour, lead, lift, T&Ps etc. Complete and as directed by the Engineer incharge of the work.

Supplying and fixing in position of 20mm dia UPVC pipes (schedule-40) with ISI monogram with necessary clamps and adhesive solution, etc., including cost of materials,labour, lead, lift,T&Ps etc. Complete and as directed by the Engineer incharge of the work.