REPAIR TO LEAKAGE/ SEEPAGE, GALVAUME SHEETS, CLEANING OF WATER TANK IN SOUTH CAMP, 4 AFSR AND REPAIR TO JOINERY, CUP BOARD ETC AT SANGAM VIHAR UNDER AGE B/R-II AT AF STN BAMRAULI

Amount

Demoliton of cement concrete (un reinforced) of any description and in any position not other wise specifically provided for complete all as specified and directed.

Taking down cement plaster or cement lime plaster of any description including racking out joints, haking for key , scrubbing down with water etc and prepare to receive new plaster complete all as specified and directed.

M&L for dismantling of plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings

M&L for dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed

Demolition of brick work or stone masonry built in cement mortar including all quoins, pillars etc from parapete etc and removal unserviceable brick/brick bats complete all as specified and directed.

M&L for brick work with sub class 'B' bricks using old size bricks, straight or curved on plan exc 6 M mean radius built in CM 1:6 as in parapets etc complete all as specifed and directed.

M&L for rendering 15mm thick in cement mortar (1:6), on fair faces or brick work or concrete surfaces, finished even and fair etc complete all as specified and directed

M&L for rendering 15mm thick in cement mortar (1:4), on fair faces or brick work or concrete surfaces, finished even and fair and mixed with water proofing compound @ 200ml per 50 Kg weight of cement (1 Bag). (Note: WPC will be measured and paid separately).

M&L for 10 mm thick rendering in CM (1:3) on fair faces of brick work or concrete surface of Chajja, roof Projection & slab etc ceiling surfaces finished even and fair complete all as specified and directed

M&L for 5mm thick rendering in CM (1:3) on fair faces of brick work or concrete ceiling surfaces finished even and fair complete all as specified and directed

M&L for two coats of cement base paint over cement wash with white cement including preparation of new surfaces of walls complete all as specified and directed by Engr-in-Charge.

M&L for preparing newly plastered surfaces of wall and applying three coat of white wash etc complete all as specified and directed

M&L for preparing newly plastered surfaces of ceiling surfaces and applying three coats of white wash etc complete all as specified and directed.

M&L for pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick coloured having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

All as per item No 14 but plain sheet as in walls,ridges etc complete all as specified and directed.

Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 complete all as specified and directed

Mild steel screw bolts(machine made)with hexagonal or square heads at one ends and screwed the other ,or screwed both ends each ends to be fitted with washers and one hexagonal or square nut nexc 5cm long and 12mm dia complete all as specified and directed

Demolition of Mud/mud puska in roofs, any thickness, including plastering and leeping (whether full thickness removed or only a part thereof) complete all as specified and directed.

Removing building materials etc to a distance of 1000 m or under, beyond the lead included in the rates, including loading, unloading and stacking at the destination complete all as specified and directed

Dismantling of brick tiles laid bedded and pointed in any morter or brick tiles on roof , floors, channels, kerbs, aprons etc,cement concrete of any description & in any position not otherwise specifically provided for complete all as specified and directed.

M&L for 25mm thick PCC 1:2:4 type B-0 (using 12.5mm graded stone aggregate) as in roof padding, benching existing roof slab to slope as per existing or as sirected including 10mm thick plaster in (1:4) finished surface even and fair complete all as specified and directed.

M&L for screed bed of 10mm thick in cement mortar (1:4) cover concrete surfaces of roof, mixed with @ 200ml liquid water proofing compound by 50Kg weight of cement (1 bag) as per manufacturerrs instruction inclduing finishing surfaces even and smooth without using extra cement complete all as specified and directed. (WPC shall be measured and paid separately). (Note: WPC will be measured and paid separately).

M&L for cleaning the roof surfcae from dust /dirt and any other foreign materials and applying a coat of bituminius primer @ 0.30 liters per square meter uniformity after the surfaces fully dried complete all as specified and directed.

M&L for applying a coat of hot blown bitumen of grade 85/25 conforming to IS 702 over APP Membrane @ 1.20 Kg/Sqm complete all as specified and directed.

M&L for APP based polymeric water proofing membrane minimum weight 3 Kg/ Sqm and minimum 3mm thick reinforced with polyster non wove fabrick (Weight not less than 150gms/Sqm or as per IS), laid over hot bitumen surface by torched application with the strict supervision of manufacturers technical supervisor. Membrane shall be laid with 100mm side/end lap on prepared surface as per manufacturer instruction work shall be carried out strictly with the technical tradesmen and supervision of technical staff of manufacturer, complete all as specified and directed

S&F Heat Resistant Terrace Tiles (300mm x 300mm x 20mm) with SRI (Solar Refractive Index) > 78, solar refection > 0.70 and initial emittance >0.75 on water proof and looped surface of terrace, laid on 20mm thick cement sand mortar in the ratio of 1:4 (1 cement : 4 coarse sand) and grouting the joints with mix of white cement & marble powder in ratio of 1:1, including rubbing and polishing of the surface upto 3 cuts complete, including providing skirting coomplete all as specified and directed.

M&L for cutting out cracks to V section in existing roofs or terrace, cleaning out and filling solidly with a hot mixture of bitumen and clen dry sand (1:1) (by weight) complete all as specified and directed.

Supply only liquid integral water proofing compund.

M&L for plain cement concrete (1:2:4) type B-1 (using 20mm graded crushed stone aggregate) as in cills bencing and other similar bands, plinth courses, parapets, coping bed plates and the like inclduing weathering, slightly rounded or chamfered angles and throating finishing surface even and smooth as directed inclduing use and waste of form work complete all as specified and directed.

S&F in repairs of stack clamps for 110mm bore of pipe made out of 50mmx5mm flat iron and 16mm dia round iron stays including bolts and nuts and securing ends of stay to wall or roof etc with PCC (1:2:4) type B-1 of 100x100x100mm complete all as specified and directed

S&F in repair of 0.63 mm th plain galvanised sheeting fixed on crumple joints fixed with screw on wall/ roof as required complete all as specified and directed

Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning etc and hoisting if required reconnecting and re-fixing in position exc 250 ltr n.exc 500 ltr cap etc complete all as specified and directed.

Demolition of RCC 500/1000 ltr water tank of any description and in any position not otherwise specifically provided for all as specified and directed

S&F 500 litres capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified and directed

S&F Rotational moulded polythene water storage tanks, hoisted and fixed in position 500ltrs capacity including GI union, checked nut and 20mm PTMT float Valve, complete all as specified and directed including taking down old PVC tank and removing to store

S&F Rotational moulded polythene water storage tanks , hoisted and fixed in position 1000ltrs capacity includin GI union, checked nut and 20mm PTMT float Valve, complete all as specified and directed including taking down old PVC tank and removing to store

S&F 20mm dia ball valves high pressure of with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and complete all as specified and directed

S&F in repair of 20mm dia ball valves high pressure of with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and complete all as specified and directed

S&F 20mm dia Gun-metal, globe or gate valves,with iron wheel screwed both ends for iron pipe or for unions and fixed in repair.

Taking up or down steel water tubing galvanised and removing to store 15 mm dia

Taking up or down steel water tubing galvanised and removing to store 20 mm dia

S&F 15mm dia medium grade galvanized water tubing with all necessary fittings and fixed complete walls all as specified and directed

S&F 20mm dia medium grade galvanized water tubing with all necessary fittings and fixed complete walls all as specified and directed

Refixing old steel tubing 15mm bore and connections in new or old position (Walls, ceiling, floors, etc.) and complete all as specified and directed

Refixing old steel tubing 20mm bore and connections in new or old position (Walls, ceiling, floors, etc.) and complete all as specified and directed

S&F in repair of PVC tank cover for 500 to 1000 Ltr capacity matching with PVC tank cover with existing tank at the site complete all as specified and directed

Cleaning of overhead tank by removing all scale and dirt etc from RCC/PVC tank from mouth of circulating pipe etc to the entire satisfaction of engineer in charge ( Capacity exceeding 250 ltr and not exceeding 500 Ltr including writing date of cleaning of each tank complete all as specified and directed

All as per item No. 47 but exceeding 500 L not exceeding 1000 Ltr capacity complete all as specified and directed.

S&F repair ball valve of 25mm dia high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screw for iron pipe and fixed complete all as specified and directed.

M&L for water proofing treatment for existing sunken portion by complete demolition of existing leakage sunken portion area exc 1 Sqm but n. exc 1.5 Sqm and cleaning the surface and applying cement slurry and 10mm thick cement plaster in CM 1:3 mixing with liquid water proofing compound after surface is fully dried, cleaned free from dust and painting with a coat of bituminous primer@ 0.3 liter / Sqm after primer the entire surface, applying with hot blown bitumen grade 85/25 conforming to IS 702 @ 1.2Kg / Sqm, over hot bitumen, providing polymeric water proofing membrance consisting of 90 to 100 micron thick central core of HMHDPE fill with standard weight not less than 3Kg/Sqm provide with 100mm side lap/end lap after that fixing P trap and filling sunken portion in PCC 1:5:10 type E-2 appox 30cm high and PCC 1:2:4 type B-1 using 20mm graded stone aggregate including demolition, supply & fixing new vitrious china Wated Closet pan orrisa pattern, size 580x440mm with integral foot rest excluding flushing cistern & flush pipe complete all as specified and directed. Note : (i) Rate quoted by the contractor shall deemed to be included for testing of treatment as directed by Engr-in-Charge.

M&L for taking down cement plaster incl tiles etc and removing the material out side MD land.& hacking out and racking out the joints with the wire brush to dry and apply one coat of URP and cement in ratio 1:1 @ 1liter per Sqm. After the drying of this process two coat of pidifin2K @ 01 liter on each coat min 4 hour gap is required and 15 mm thick rendering in CM 1:4 in roof/ wall complete incl finished even & smooth without using extra cement all as directed.

Dismantling floor hearth or wall tilling including cement mortar bedding , removing unserviceable tiles and rubbish off the premises for minor repair to floor tiles/ nahani traps / concealed stop cock and GI tubing in wall etc in patches.

S&F non skid ceramic coloured tiles 300mmx300mmx 8 to 10 mm thick in floor set and jointed less neat cement slurry and pointed in coloured cement to match over and including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and directed.

M&L for glazed ceramic coloured/ designer tiles including highlighter on verticle surface of size 300X450X 8 to 10 mm thick set and jointed with cement slurry and pointing in white cement to match over and including 10mm thick backing in cement mortar 1:4 in skirting / dado complete all as specified and directed.

Taking down soil, waste and rain water pipes (any size or pattern) including all fittings, heads, shoes, bends, swan-necks, bends etc.

S&F in repairs of 110mm bore PVC (SWR) pipe single socketed in any length with rubber ring joints fixed to walls .

S&F PVC (SWR) 75mm bore pipes single socketed in any length with rubber ring joints laid in trenches or in floors.

S&F in repairs of 110mm bore PVC (SWR) bends any radius.

S&F in repairs of 75mm bore PVC (SWR) bends any radius.

S&F in repair of PVC (SWR) Junction single (Single T) equal or unequal of 110mm with access doors etc

S&F in repair of PVC (SWR) Junction single (Single T) equal or unequal of 110mm.

M&L for PVC (SWR) floor trap 75 mm dia of outlet with stainless steel grating including jointing to waste pipe in run led joint complete all as specified and directed (fixed in replacement)

S&F in reapir of PVC (SWR) vent cowl of size 110mm dia.

S&F in repair of vitreous china squatting pan Orissa Pattern size 580x440mm white with integal foot rest (excluding flushing cistern and flush pipe) including connection to trap and flushing pipe complete including trap, set with cement concrete complete all as specified and directed.

S&F in repair of vitreous china wash down water closet (pedestal pattern) white (excluding flushing cistern and flush pipe) and P or S trap including connection to drain (or outgoing pipe) and to flushing pipe anti-syphonage pipe etc complete all as specified and directed including plastic water closetseat closed pattern with flat bottom and cover and mild steel chromiunm plated or aluminum hinging device.

S&F in repair of Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed

S&F in repair of 10 litres capacity PVC valve less, symphonic action type flushing cistern; low level, white, with inlet, ball valve, float and handle including bracket

S&F in repair of 15 mm bore stop/angle valve ISI marked, cast copper alloy, screwed down, high pressure,CP fancy type handle screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S&F in repair of CP 15 mm dia bib tap cast copper alloy with fancy type handle screwed down, screwed for iron pipe complete all as specified and directed.

S&F PVC connection 600 mm long with brass coupling on both end suitable for 15 mm bore of pipe complete all as specified and directed.

Taking down Chowkats or frames with shutter not exceeding 1.5 Sqm each (without taking off shutters from the frames)

Taking down Chowkats or frames with shutter exceeding1.5 Sqm but not exceeding 4 Sqm each (Without taking off shutters from the frames)

Taking down shutters of any description not exceeding 1 Sqm each.

Taking down shutters of any description exceeding 1 Sqm but not exceeding 2 Sqm each

Refixing of shutter in the same opening of any description n exceeding 1 sqm each.

Refixing of shutter in the same opening of any description exceeding 2 sqm Each

S&F pressed steel frames of size 125mm x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc complete all as specified and directed.

S&F pressed steel frames of size 105mm x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc complete all as specified and directed.

S&F 2nd Hard wood, Plain, solid, straight chowkats and frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue painted at joints.

S&F 35 mm thick 2nd class Hard wood of Glazed and skelton shutters, open rebated and prepared to receive glass, gauze,etc., divided in to squares with plain, chamfered or rounded mitred and rebated sash bars any numbers, edges of framing plain, chamfered or rounded, fitted with cut mitred beads for securing class etc, size of me-mbers of shutters as specified in SSR Part-I

S&F 35 mm thick factory made shutters, 2nd class Hard woodwood rail and style, plain framed,panelled shutter with out interloking rail with one panel of 9mm BWP Commercial ply or 12mm veneered particle board with commercial face veneers on both faces. The size of rail and stileas per SSR Part-I, kiln seasoned and chemically pressure treated complete all as specified and directed.

S&F 35 mm Flush shutters, solid construction, with block board core and playwood face panels, commercial type on both side complete all as specified and directed

S&F framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging of Fe-410-W(Gde-E250 quality B) also fastening and fixing complete all as specified and directed

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm single side prelam PVC sheet & edges will be painted to match with prelam sheet, reinforced with M.S. square tube and fixing in opening as per specification & drawing complete all as specified and directed by Engr-in-Charge

S&F factory made solid panel pvc door shutter 30 mm thick (style) consisting of frame made out of M. S. tubes for top & bottom rails. M. S. frame shall be covered with heat moulded plain colour PVC `C` channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M. S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supply & fixing in the frame at site as per specification & drawing complete all as specified and directed by Engr-in-Charge.

S&F steel window with side hung shutters including projecting type hinges with steel handle and steel peg stay complete with glazing bars dovetailed or welded etc complete all as specifed and directed.

S&F steel ventilator with top hung shutter including hinges, steel peg stay etc, complete all as specified and directed.

M&L for mild steel work in bands straps,including bolts as in holdfasts and similar articles conforming to Fe-310-0,Fe-410-0 complete all as specified and directed .

M&L for framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410-0 or Fe 310-0. (in Repair)

S&F 100mm Stainless steel Butt hinges ,

S&F 100 mm But Hinges, medium weight cold rolled mild steel and Fixed.

S&F 250 mm long Aluminium alloy, anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded sections or cast Aluminium alloy.

S&F 150mm long Aluminium, anodised, barrel tower bolts of extruded section.

S&F 200 mm long Aluminium, anodised, barrel tower bolts of extruded section

S&F 150 mm long Extruded Aluminium alloy handles, fabricated type, anodised.

S&F 100 mm long Extruded Aluminium alloy handles, fabricated type, anodised.

S&F 18-19 mm thick block board grade 2 quality interior grade quality, decorative type with decorative face veneer on one face as in cupboard shutters,shelves and pelmet boxes fixed with screw to timber frame work complete all as specified and directed.

S&F 12 mm thick block board grade 2 quality interior grade quality, decorative type with as in cupboard shutters,shelves and pelmet boxes fixed with screw to timber frame work complete all as specified and directed.

S&F 125 mm Hasp and staple,aluminum anodised and fixed with screw

S&F Continous (piano) hinges, mild steel bright finished or electro qalvanized, width of flaps (When open) 30mm

S&F 0.56 mm thick plain aluminium sheeting alloy 31000 H4 ridges hips, valley gutter, drip, and straight flashing fixed to doors.

S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples etc complete all as specified and directed.

S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples etc complete all as specified and directed.(In Repair)

Hacking out old broken glass (any thickness and size or quality) from any frames glazed with putty or fixed with beads .

Supply only 3mm thick sheet glass ordinary quality glazing with oil putty in metal or wooden beads in square n exc 0.5 Sqm in each pane complete all as specified and directed.

Supply only 3mm thick figured glass pin head type glazing with oil putty on metal frame or wooden beads in square n exc 0.5 Sqm in each pane complete all as specified and directed.

S&F 3mm thick sheet glass ordinary quality glazing with oil putty on metal frame or wooden beads in square n exc 0.5 Sqm in each pane complete all as specified and directed.

S&F 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed

S&F 140mm Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor

M&L for plain cement concrete 1:2:4 type B-1 using 20 mm graded crushed stone aggregate for fixing holdfast including all necessary form work complete all as specified and directed.

M&L for preparing new or previously untreated surfaces of wood or wood based materials of any description exc 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L for preparing old surfaces of wood or wood based materials of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint etc complete all as specified and directed.

M&L for preparing new or previously untreated steel surfaces of any description not otherwise described over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L for preparing old or previously untreated steel surfaces of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint etc complete all as specified and directed.

S&F 20 mm Harrision rails, anodised aluminum alloy chromium plated with fixing brackets stops, rollers etc.

Rendering 15 mm thick on fair faces or brick work or concrete surfaces in cement mortar (1:4) and finished fair and even without using extra cement.

M&L for preparing newly plastered surfaces of walls and applying two coasts distemper oil-emulsion over a coat of chalk whiting complete all as specified and directed.

S&F PVC cabinet frame of size 18mm x75mm made out of 18mm thick PVC board wood grain colour and frame shall be fixed with 50mm long steel screw inside using drilling machine and plastic fasteners Make : Rajshree or equivalent as approved complete all as specified and directed.

S&F of PVC cabinet box and shutter made out of 18 mm thick one side PVC prelaminated wood grain board and shutter will be fixed on the PVC frame with auto hinges and steel screw including fancy type stainless steel handles,magenetic catcher etc complete all as specified and directed. Size of cabinet not more than 90 cm wide.

S&F 30 mm thick 2nd class Hard wood of Glazed and skelton shutters, open rebated and prepared to receive glass, gauze,etc., divided in to squares with plain, chamfered or rounded mitred and rebated sash bars any numbers, edges of framing plain, chamfered or rounded, fitted with cut mitred beads for securing class etc, size of me-mbers of shutters as specified in SSR Part-I

S&F 75 mm But Hinges, medium weight cold rolled mild steel and Fixed.

S&F powder coating aluminium frame for doors, windows, ventilators ,partion etc with one or more rebates including joining cleat for fixing etc. complete all as specified and directed (minimum thickness of powder coating 50 micron).

Supply 4.8mm thick sheet glass ordinary quality any size and in any type of frame and glazing with rubber beading in square n.exc 0.5 Sqm in each pane complete all as specified and directed.

All as per item No 123 above but 4.8mm thick glass in square exc 0.5 Sqm in each pane

S&F in repair of 3 mm thick Aluminium composite panel cladding using aluminium composite panel sheet 3mm thick (Vita 25mm aluminium foil with PVDF coating) at ht of 4-5 mtr (ACP will be fixed over aluminum framed works) and filling the gap with silicon, sealant and other materials of approved quality etc complete all as specified and directed.

Taking down existing aluminium windows and re-fixing the same after minor repairs replacement of rubber beading , aluminium strips and windows shutter side locking arrangement etc complete all as specified and directed.

M&L for double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover,governing pivot made of brass, other parts made of mild steel heavy duty and fixed including Taking down existing floor spring if required complete all as specified and directed

S&F in repair of Aluminium (die cast body)Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed

M&L for in reapair of rubber bead/seal 40mm wide and 3-4mm thick to cover doors/window gap fixed with nails and make good to doors as in repair complete all as specified and directed.

Note :- Credit shown in credit schedule of tender document shall be considered by the tenderer while quoting the rates of various items. The same shall be recovered from various payment to contractor before handing over old material

M/S V K MEHROTRA (BID ID -3335698)

R K CONSTRUCTION COMPANY (BID ID -3336454)