Complete development of Power Department Complex in Choglamsar Leh which includes landscaping

Amount

Earthwork in excavation by Mechanical means (Hydraulic excavator) in trenches for foundation, drians, pipes, cables etc., not exceeding 1.5m in width and for shafts wells, cesspits and the like not exceeding 10sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5m, including getting out excavated earth and disposal of surplus excavated earth as directed, within lead of 50meters

Surface dressing of the ground including removing vegetation and inequalities not exceeding 15cm deep and disposal of rubbish lead up to 50m and lift upto 1.5m

Providing and laying in position soling of 100mm filling and spreading with required level including consolidation watering etc complete job all as directed by Engineer in charge

Laying, spreading and compacting stone aggregate of specified sizes to WBM specifications in uniform thickness, hand picking, rolling with 3 wheeled road/ vibratory roller 8-10 tonne capacity in stages to proper grade and camber, applying and brooming requisite type of screening / binding material to fill up interstices of coarse aggregate, watering and compacting to the required density (including loading unloading and haulage complete job including carriage complete

Providing and laying in position cement, concrete of specified grade excluding the cost of centering, shuttering finishing with 1:4:8(1cement:4coarse sand:8graded stone aggregate 20 mm nominal size)

Providing and laying in position specified grade of reinforced cement, concrete of excluding the cost of centering, shuttering finishing with 1:1.5:3(1cement: 1.5coarse sand: 3graded stone aggregate 20 mm nominal size)

Reinforcement for RCC work including straightening, cutting, bending, placing in position and binding all complete, thermo mechanically treated bars.

Centering and shuttering including strutting propping etc and removal of form for

Fabrication, installation, painting and fixing of basketball post and accessories (1 pair - 2 Nos) complete job Each no consisting of : 1. Acrylic fibre board = size = 1.80m x 1.22m of 30mm thickness 2. Board supporting frame =L angle size of 20mm x 30mmx3mm thickness 3. MS ring with net = 0.45m dia and thickness of ring is 20mm 4. Acrylic board fixed with MS plate size of 200mm x200mm x3mm thick with supporting 4 no. of anchor bolts 5. Basket ball hoop (post) of SHS of size 200mmx200mmx4mm thick with supporting MS plate size of 400mm x400mm x12mm with 4 no of anchor bolts 16mm dia with length 600mm (drawing enclosed) 6. M20 grade Cement concrete anchors for fixing of posts

Forming groove for construction joints with uniform size in the top layer of concrete as per approved pattern of panels and finishing the groove complete as per specification (panel size :3x3m and groove size 6mm X20mm)

Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete. On concrete work

Carriage of materials By Mechanical Transport including loading, unloading and stacking. Cement avg by MT 5Km

Carriage of materials By Mechanical Transport including loading, unloading and stacking. Sand and aggregates avg by MT 10 Km

Carriage of materials By Mechanical Transport including loading, unloading and stacking by MT for an avg of 15 Km a) stones

M/S MH ENETERPRISES (BID ID -160188)