Development of Hill view Guest House under the work of Various Civil Electrical Water Supply Horticulture Hospitality jobs required for Hockey

B Total Amount i/c GST (DSR + Non-DSR):- 45,576,661

BILL OF QUANTITY

“Development of Hill view Guest House,under the work of Various Civil, Electrical, Water Supply, Horticulture, Hospitality jobs required

for Hockey World Cup-2023 and other jobs in Steel Township at Rourkela (Odisha)".

SL No DSR/MR ITEM DESCRIPTION Unit Qty RATE

1 2.8 Earth work in excavation by mechanical means (Hydraulic excavator) / manual

means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on

plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including

getting out the excavated soil and disposal of surplus excavated soil as directed,

within a lead of 50 m.

2.8.1 All kinds of soil Cum 478.00 302.22 144459.71

2 2.25 Filling available excavated earth (excluding rock) in trenches, plinth, sides of

foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited Cum 160.00 267.55 42808.71

layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.

3 MR-1 Supplying and filling in plinth with sand under floors, including watering, ramming, 115,522

consolidating and dressing complete.

4 1.0 CARRIAGE OF MATERIAL

1.1 By Mechanical Transport including loading, unloading and stacking

5 15.7 Demolishing brick work manually/ by mechanical means including stacking of

serviceable material and disposal of unserviceable material within 50 metres lead as

per direction of Engineer-in-charge.

15.7.4 In cement mortar Cum 23.00 1789.44 41157.08

6 15.2 Demolishing cement concrete manually/ by mechanical means including disposal of

material within 50 metres lead as per direction of Engineer - in - charge.

15.2.2 Nominal concrete 1:4:8 or leaner mix (i/c equivalent design mix) Cum 5.00 1306.01 6530.04

7 15.18 Dismantling steel work in built up sections in angles, tees, flats and channels

including all gusset plates, bolts, nuts, cutting rivets, welding etc. including KG 3200.00 4.90 15677.14

dismembering and stacking within 50 metres lead.

8 15.28 Dismantling roofing including ridges, hips, valleys and gutters etc., and stacking the

material within 50 metres lead of:

9 15.3 Demolishing R.C.C. work manually/ by mechanical means including stacking of steel

bars and disposal of unserviceable material within 50 metres lead as per direction of Cum 5.00 3084.96 15424.81

Engineer - in- charge.

10 6.36 Brick work with modular extruded brunt fly ash clay sewer bricks (Conforming to IS:

4885 ) in cement mortar 1:4 (1 cement : 4 Coarse sand) in foundation and plinth :

6.36.1 Cement Mortar 1:4 ( 1 cement : 4 coarse sand) Cum 39.00 6878.45 268259.62

11 6.32 Brick work with clay flyash F.P.S. (non modular) brick of class designation 7.5 in

superstructure above plinth level up to floor five level in :

6.32.2 Cement mortar 1:6 (1 cement : 6 coarse sand) Cum 48.00 8629.70 414225.51

12 6.45 Half brick masonry with non modular fly ash bricks of class designation 10,

conformingio IS :12894, in super structure above plinth and upto floor V level.

6.45.2 Cement mortar 1 : 4 (1 cement : 4 coarse sand) Sqm 218.00 1021.60 222707.83

13 4.1 Providing and laying in position cement concrete of specified grade excluding the

cost of centering and shuttering - All work up to plinth level :

4.1.3 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded

stone aggregate 20 mm nominal size derived from natural sources)

14 5.1 Providing and laying in position specified grade of reinforced cement concrete,

excluding the cost of centering, shuttering, finishing and reinforcement - All work up

to plinth level :

5.1.2 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3

graded stone aggregate 20 mm nominal size derived from natural sources)

15 5.2 Reinforced cement concrete work in walls (any thickness), including attached

pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers,

abutments, posts and struts etc. above plinth level up to floor five level, excluding

cost of centering, shuttering, finishing and reinforcement :

5.2.1 1:1½:3 (1 cement : 1½ coarse sand (zone-III) derived from natural sources : 3

graded stone aggregate 20 mm nominal size derived from natural sources).

16 4.1 Providing and laying in position cement concrete of specified grade excluding the

cost of centering and shuttering - All work up to plinth level :

4.1.8 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded

stone aggregate 40 mm nominal size derived from natural sources)

5.9 Centering and shuttering including strutting, propping etc. and removal of form for

17 5.9.1 Foundations, footings, bases of columns, etc. for mass concrete Sqm 100.00 324.45 32444.73

18 5.9.3 Suspended floors, roofs, landings, balconies and access

19 5.9.4 Shelves (Cast in situ) Sqm 1.00 807.62 807.62

BILL OF QUANTITY

“Development of Hill view Guest House,under the work of Various Civil, Electrical, Water Supply, Horticulture, Hospitality jobs required

for Hockey World Cup-2023 and other jobs in Steel Township at Rourkela (Odisha)".

5.9.5 ITEM bressumers

Lintels, beams, plinth beams, girders, DESCRIPTIONand Unit Qty RATE

21 5.9.6 Columns, Pillars, Piers, Abutments, Posts and Struts Sqm 8.00 847.33 6778.68

22 5.22/5.22A Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing

in position and binding all complete upto plinth level./ Steel reinforcement for R.C.C.

work including straightening, cutting, bending, placing in position and binding all

complete above plinth level

5.22.6/5.22A.6 Thermo-Mechanically Treated bars of grade Fe-500D or more. Kg 400.00 94.45 37781.07

23 15.56 Dismantling old plaster or skirting raking out joints and cleaning the surface for

plaster including disposal of rubbish to the dumping ground within 50 metres lead. sqm 666.00 47.46 31610.62

24 13.4 12 mm cement plaster of mix :

25 13.6 20 mm cement plaster of mix :

26 13.18 Neat cement punning. Sqm 50.00 71.43 3571.61

27 11.3 Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone

aggregate) finished with a floating coat of neat cement, including cement slurry, but

excluding the cost of nosing of steps etc. complete.

11.3.1 40 mm thick with 20 mm nominal size stone aggregate Sqm 357.00 574.20 204988.13

28 11.39 Providing and laying rectified Glazed Ceramic floor tiles of size 300x300mm or more

(thickness to be specified by the manufacturer), of 1st quality conforming to IS :

15622, of approved make, in colours White, Ivory, Grey, Fume Red Brown, laid on

20 mm thick cement mortar 1:4 (1 Cement: 4 Coarse sand), jointing with grey Sqm 634.00 1204.02 763349.59

cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and

matching pigments etc., complete.

29 8.31 Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622

(thickness to be specified by the manufacturer), of approved make, in all colours,

shades except burgundy, bottle green, black of any size as approved by Engineer-in-

Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement Sqm 808.00 1120.42 905299.79

mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg

per sqm, including pointing in white cement mixed with pigment of matching shade

30 13.43 Applying one coat of water thinnable cement primer of approved brand and

manufacture on wall surface :

13.43.1 Water thinnable cement primer Sqm 8943.00 67.90 607253.65

13.81 Distempering with 1st quality acrylic distemper, having VOC (Volatile Organic

Compound ) content less than 50 grams/ litre, of approved brand and manufacture,

including applying additional coats wherever required, to achieve even shade and

33 13.50 Applying priming coat:

13.50.1 With ready mixed pink or Grey primer of approved brand and manufacture on wood

work (hard and soft wood)

34 13.61 Painting with synthetic enamel paint of approved brand and manufacture to give an

13.61.1 Two or more coats on new work Sqm 411.00 138.49 56920.20

35 13.80 Providing and applying white cement based putty of average thickness 1 mm, of

approved brand and manufacturer, over the plastered wall surface to prepare the Sqm 8155.00 130.48 1064103.72

surface even and smooth complete.

18.8 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal

stability for hot & cold water supply, including all CPVC plain & brass threaded

fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of

pipes & fittings with one step CPVC solvent cement and the cost of cutting chases

and making good the same including testing of joints complete as per direction of

Engineer in Charge. Concealed work, including cutting chases and making good the

36 18.8.1 15 mm nominal dia Pipes Metre 145.00 464.78 67393.54

37 18.8.2 20 mm nominal dia Pipes Metre 174.00 541.27 94181.38

38 17.1 Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm

sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including

flush pipe, with manually controlled device (handle lever) conforming to IS : 7231,

with all fittings and fixtures complete, ncluding cutting and making good the walls and

floors wherever required:

17.1.1 White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type

BILL OF QUANTITY

“Development of Hill view Guest House,under the work of Various Civil, Electrical, Water Supply, Horticulture, Hospitality jobs required

for Hockey World Cup-2023 and other jobs in Steel Township at Rourkela (Odisha)".

17.4 ITEMchina

Providing and fixing white vitreous DESCRIPTION

flat back or wall corner type lipped front Unit Qty RATE

urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with

automatic flushing cistern with standard flush pipe and C.P. brass spreaders with

brass unions and G.I clamps complete, including painting of fittings and brackets,

cutting and making good the walls and floors wherever required :

17.4.1 One urinal basin with 5 litre white P.V.C. automatic flushing cistern Each 5.00 5551.11 27755.55

40 17.10 Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983

with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and

brackets, cutting and making good the walls wherever required :

17.10.2 Kitchen sink without drain board

41 18.21 Providing and fixing uplasticised PVC connection pipe with brass unions :

18.21.2 45 cm length

42 17.28 Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste

fittings complete.

17.28.2 Flexible pipe

43 10.2 Structural steel work riveted, bolted or welded in built up sections, trusses and

framed work, including cutting, hoisting, fixing in position and applying a priming coat Kg 3197.00 117.95 377077.59

of approved steel primer all complete.

44 MR-3 Fabricating and erecting structural steel like joist/ channel/ angle in trusses/ posts/ 112,100

rafter/ purlins in true to line and level including cutting required length. drilling holes

and welding etc complete as per the direction of the Engr-In-charge. (Excluding cost Kg 2800.00 40.04

of structural steel).

45 MR-2 Demolishing granolithic flooring, cement flooring and DPC 25 mm thick by chisel 64,479

without disturbing the bottom concrete/ brick work including removal of debris upto Sqm 1224.00 52.68

50.00 mtr as per direction of Engr In-Charge.

46 26.6 Water proofing treatment of RCC sunshade with Zycosil/equivalent water proofing

Solution (1 litre of Zycosil/equivalent & 20 litres of water stirred first & 2 litres of

Zycoprime/equivalent added and stirred (total 23 litres)) till it meets the saturation Sqm 50.00 143.08 7153.75

level and testing as per RILEM or by water drops test in which water drops do not

absorb but drops remain or rolls.

47 MR-71 Cleaning the surface by chipping of lose materials etc. and provide two coat of Sika 531,074

Topseal 107(Two pack acrylic cementitious water proofing coating system) with glass

fiber on the surface (3kg per sqm for two coats) or equivalent and as per direction of Sqm 1330.00 399.30

Engg-In-Charge.

48 MR-52 Providing & mixing chemical admixture such as "SIKA LATEX" or equivalent in 12,617

cement concrete / mortar and bonding work as per manufacturer's specification and Lit 25.00 504.66

as directed by Engineer- in - Charge.

49 22.5 Providing and laying water proofing treatment in sunken portion of WCs, bathroom

etc., by applying cement slurry mixed with water proofing cement compound

consisting of applying :

a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement

compound @ 0.253 kg/ sqm. This layer will be allowed to air cure for 4 hours.

(b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing Sqm 50.00 544.28 27213.75

cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours

followed with water curing for 48 hours.

The rate includes preparation of surface, treatment and sealing of all joints, corners,

junctions of pipes and masonry with polymer mixed slurry.

50 11.23 Marble stone flooring with 18 mm thick marble stone, as per sample of marble

approved by Engineer-in-charge, over 20 mm (average) thick base of cement mortar

1:4 (1 cement : 4 coarse sand) laid and jointed with grey cement slurry, including

rubbing and polishing complete with :

51 11.41A Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified

by the manufacturer) with water absorption less than 0.08% and conforming to

IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20

mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement

slurry @3.3 kg/sqm including grouting the joints with white cement and matching

pigments etc. The tiles must be cut with the zero chipping diamond cutter only .

Laying of tiles will be done with the notch trowel, plier, wedge, clips of required

thickness, leveling system and rubber mallet for placing the tiles gently and easily.

11.41A.1 Double charge vitrified tile polished finish of size

BILL OF QUANTITY

“Development of Hill view Guest House,under the work of Various Civil, Electrical, Water Supply, Horticulture, Hospitality jobs required

for Hockey World Cup-2023 and other jobs in Steel Township at Rourkela (Odisha)".

11.56 ITEM DESCRIPTION

Providing and laying Polished Granite stone flooring in required design and patterns, Unit Qty RATE

in linear as well as curvilinear portions of the building all complete as per the

architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base

of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry

and pointing with white cement slurry admixed with pigment of matching shade

including rubbing, curing and polishing etc. all complete as specified and as directed

by the Engineer-in-Charge

11.56.1 Polished Granite stone slab colour of Black, Cherry/Ruby Red or equivalent Sqm 27.00 4118.20 111191.40

53 14.85 Taking out existing wooden door shutter, repair by cutting, painting etc. and refixing

of repaired door shutters to existing door frames, including replacement of hinges

with screws, etc. as required, all complete as per the direction of the Engineer-in- Each 116.00 343.41 39835.75

54 15.13 Taking out doors, windows and clerestory window shutters (steel or wood) including

stacking within 50 metres lead :

15.13.1 Of area 3 sq. metres and below Each 250.00 124.64 31159.38

55 26.86 Providing and fixing factory made single extruded WPC (Wood Polymer Composite)

solid door/window/clerestory windows & desertory other Frames/Chowkhat

comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium

carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic

additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after

applying PVC solvent cement and screwed with full body threaded star headed SS

screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of

2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2,

modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A

category with property of being termite/borer proof, water/moisture proof and fire

retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required

dia and length complete as per direction of Engineer-In- Charge. (M.S hold fast/lugs

or SS dash fasteners shall be paid for separately).

Note: For WPC solid door/window frames, minus 5mm tolerance in dimensions i.e

depth and width of profile shall be acceptable. Variation in profile dimensions on plus

side shall be acceptable but no extra payment on this account shall be made.

56 26.87 Providing and fixing factory made single extruded WPC (Wood Polymer Composite)

solid plain flush door shutter of required size comprising of virgin polymer of K value

58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice

husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms)

having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N

(Face) & 900 N (Edge), minimum compressive strength 50 N/mm2,

modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A

category with property of being termite/borer proof, water/moisture proof and fire

retardant and fixing with stainless steel butt hinges of required size with necessary

full body threaded star headed counter sunk S.S screws, all as per direction of

Engineer-In- Charge. (Note: stainless steel butt hinges and necessary S.S screws

shall be paid separately)

57 9.119 Providing and fixing factory made P.V.C. door frame of size 50x47 mm with awall

thickness of 5 mm, made out of extruded 5mm rigid PVC foam sheet, mitred at

corners and joined with 2 Nos of 150 mm long brackets of 15x15 mm M.S. square

tube, the vertical door frame profiles to be reinforced with 19x19 mm M.S. square

tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the RM 180.00 430.12 77421.70

frame. The door frame to be fixed to the wall using M.S. screws of 65/100 mm size,

complete as per manufacturer’s specification and direction of Engineer in-Charge.

BILL OF QUANTITY

“Development of Hill view Guest House,under the work of Various Civil, Electrical, Water Supply, Horticulture, Hospitality jobs required

for Hockey World Cup-2023 and other jobs in Steel Township at Rourkela (Odisha)".

9.120 Providing and fixing factory made ITEM DESCRIPTION

panel PVC door shutter consisting of frame made Unit Qty RATE

out of M.S. tubes of 19 gauge thickness and size of 19 mm x 19 mm for styles and

15x15 mm for top & bottom rails. M.S. frame shall have a coat of steel primers of

approved make and manufacture. M.S. frame covered with 5 mm thick heat moulded

PVC 'C' channel of size 30 mm thickness, 70 mm width out of which 50 mm shall be

flat and 20 mm shall be tapered in 45 degree angle on both side forming styles and 5

mm thick, 95 mm wide PVC sheet out of which 75mm shall be flat and 20 mm shall

be tapered in 45 degree on the inner side to form top and bottom rail and 115 mm

wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered on

both sides to form lock rail. Top, bottom and lock rails shall be provided both side of

the panel. 10 mm (5 mm x 2 ) thick, 20 mm wide cross PVC sheet be provided as

gap insert for top rail & bottom rail, paneling of 5 mm thick both side PVC sheet to be

fitted in the M.S. frame welded/ sealed to the styles & rails with 7 mm (5 mm+2 mm)

thick x 15 mm wide PVC sheet beading on inner side, and joined together with

solvent cement adhesive. An An additional 5 mm thick PVC strip of 20 mm width is

to be stuck on the interior side of the 'C' Channel using PVC solvent adhesive etc.

complete as per direction of Engineer-in-charge, manufacturer's specification &

9.120.1 30 mm thick plain PVC door shutters Sqm 60.00 2586.62 155197.39

59 21.1 Providing and fixing aluminium work for doors, windows, ventilators and partitions

with extruded built up standard tubular sections/ appropriate Z sections and other

sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash

fasteners of required dia and size, including necessary filling up the gaps at

junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket

etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed

mechanically wherever required including cleat angle, Aluminium snap beading for

glazing / paneling, C.P. brass / stainless steel screws, all complete as per

architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling

and dash fasteners to be paid for separately) :

21.1.1 For fixed portion

21.1.1.2 Powder coated aluminium (minimum thickness of powder coating 50 micron) kg 100.00 491.28 49128.04

60 21.1.2 For shutters of doors, windows & ventilators including providing and fixing hinges/

pivots and making provision for fixing of fittings wherever required including the cost

of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately)

21.1.2.2 Powder coated aluminium (minimum thickness of powder coating 50 micron) kg 1750.00 595.06 1041350.00

61 21.2 Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer

or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling

fixed in aluminum doors, windows shutters and partition frames with C.P. brass /

stainless steel screws etc. complete as per architectural drawings and directions of

engineer in-charge.

21.2.2 Pre-laminated particle board with decorative lamination on both sides sqm 25.00 1002.00 25049.98

62 21.3 Providing and fixing glazing in aluminium door, window, ventilator shutters and

partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the

architectural drawings and the directions of engineer-in-charge . (Cost of aluminium

snap beading shall be paid in basic item):

21.3.2 With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm) Sqm 175.00 1396.56 244398.28

63 9.97 Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not

less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or

shade, with necessary screws etc. complete :

64 9.100 Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not

less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or

shade, with necessary screws etc. complete :

BILL OF QUANTITY

“Development of Hill view Guest House,under the work of Various Civil, Electrical, Water Supply, Horticulture, Hospitality jobs required

for Hockey World Cup-2023 and other jobs in Steel Township at Rourkela (Odisha)".

9.57 Providing and fixing ISI markedITEM

IS : DESCRIPTION

1341 oxidised M.S. pressed butt hinges with Unit Qty RATE

necessary screws etc. complete. (copper oxidized as per IS: 1378)

66 9.96 Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic

coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required

colour or shade, with nuts and screws etc. complete :

67 9.101 Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised

(anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to

required colour and shade, with necessary screws etc. complete.

9.101.2 Twin rubber stopper Each 108.00 65.58 7083.16

68 13.91 Removing dry or oil bound distemper, water proofing cement paint and the like by

scrapping, sand papering and preparing the surface smooth including necessary Sqm 8943.00 21.97 196450.56

repairs to scratches etc. complete.

69 17.31 Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved

quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. EACH 40.00 1486.75 59469.89

brass screws and washers complete

70 18.58 Providing and fixing PTMT grating of approved quality and colour.

18.58.2 Rectangular type with openable circular lid

18.58.2.1 150 mm nominal size square 100 mm

diameter of the inner hinged round grating

71 18.48 Providing and placing on terrace (at all floor levels) polyethylene water storage tank,

IS : 12701 marked, with cover and suitable locking arrangement and making

necessary holes for inlet, outlet and overflow pipes but without fittings and the base per liter 30000.00 10.22 306589.29

support for tank

72 14.79 Disconnecting damaged overhead/terrace PVC water storage tank of any size from

water supply line and removing from the terrace including shifting at ground level as Each 30.00 376.70 11301.13

per direction of Engineer-in-charge

73 14.75 Repair to plaster of thickness 12mm to 20 mm in patches of area 2.5 sqm and under,

including cutting the patch in proper shape, raking out joints and preparing plastering

the wall surface with white cement based polymer modified self curing mortar, Sqm 25.00 569.30 14232.43

including disposal of rubbish, all complete as per the direction of Engineer-In-Charge.

74 MR-56 Supplying and providing Expansion joint treatment with SIKADUR-COMBIFLEX SG 32,408

system of Sika (200 mm wide strip) or equivalent at all levels by cleaning the surface

completely from loose dust, dirt, bitumen etc, making groove and sealing the joints RM 20.00 1620.39

complete including all labours, tools, tackles etc. as per specification and direction of

Engineer-in-charge.

75 14.91 Providing and laying APP (Atactic Polypropylene Polymer) modified prefabricated

five layer 3 mm thick water proofing membrane, black finished reinforced with non-

woven polyester matt consisting of a coat of bitumen primer for bitumen membrane

@ 0.40 litre/sqm by the same membrane manufacture of density at 25°C, 0.87-0.89

kg/ litre and viscocity 70-160 cps. Over the primer coat the layer of membrane shall

be laid using Butane Torch and sealing all joints etc, and preparing the surface

complete. The vital physical and chemical parameters of the membrane shall be as

under : Joint strength in longitudinal and transverse direction at 23°C as 650/ 450N/

5cm. Tear strength in longitudinal and transverse direction as 300/ 250N. Softening

point of membrane not less than 150°C. Cold flexibility shall be upto -2°C when

tested in accordance with ASTM, D - 5147. The laying of membrane shall be got

done through the authorised applicator of the manufacturer of membrane :

76 14.91.1 Providing and laying APP (Atactic Polypropylene Polymer) modified prefabricated

five layer 3 mm thick water proofing membrane, black finished reinforced with non-

woven polyester matt consisting of a coat of bitumen primer for bitumen membrane

@ 0.40 litre/sqm by the same membrane manufacture of density at 25°C, 0.87-0.89

kg/ litre and viscocity 70-160 cps. Over the primer coat the layer of membrane shall

be laid using Butane Torch and sealing all joints etc, and preparing the surface

complete. The vital physical and chemical parameters of the membrane shall be as

under : Joint strength in longitudinal and transverse direction at 23°C as 650/ 450N/

5cm. Tear strength in longitudinal and transverse direction as 300/ 250N. Softening

point of membrane not less than 150°C. Cold flexibility shall be upto -2°C when

tested in accordance with ASTM, D - 5147. The laying of membrane shall be got

done through the authorised applicator of the manufacturer of membrane :

77 9.71 Providing and fixing IS : 12817 marked stainless steel butt hinges (heavy weight)

with stainless steel screws etc. complete :

BILL OF QUANTITY

“Development of Hill view Guest House,under the work of Various Civil, Electrical, Water Supply, Horticulture, Hospitality jobs required

for Hockey World Cup-2023 and other jobs in Steel Township at Rourkela (Odisha)".

17.7A Providing and fixing wash basinITEM DESCRIPTION

with C.I. brackets, 15 mm dia CP Brass single hole Unit Qty RATE

basin mixer of approved quality and make, including painting of fittings and brackets,

cutting and making good the walls wherever required:-

a) White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single 105,686

hole basin mixer

79 MR Providing and fixing Pillar Cock (Rocket Type) with Aerator of make ESSCO of 13,975

JAGUAR (SQT-ESS-507KN) all complete as per direction of Engr. in-Charge.

80 MR Providing and fixing Pillar Cock (Super Delux) with Aerator of make ESSCO of 13,731

JAGUAR (SQT-ESS-508KN) all complete as per direction of Engr. in-Charge.

81 MR Providing and fixing Angle Cock with wall flange of make ESSCO of JAGUAR (SQT- 35,523

ESS-526NKN) all complete as per direction of Engr. in-Charge.

82 MR Providing and fixing Two in One Bib Cock (Long Body) with wall flange of make 18,026

ESSCO of JAGUAR (SQT-ESS-512AKN) all complete as per direction of Engr. in- Each 15.00 1201.76

83 MR Providing and fixing Two in One Bib Cock with wall flange of make ESSCO of 15,449

JAGUAR (SQT-ESS-512ANKN) all complete as per direction of Engr. in-Charge.

84 MR Providing and fixing 80mm dia Single Flow Overhead Shower (ABS Body Chrome 28,442

Plated with Gray Face with Rubit Cleaning System) of make ESSCO of JAGUAR (EOS-

ESS-541RB) including 240mm long Round Shape Shower Arm with wall flange of Each 29.00 980.77

make ESSCO of JAGUAR (ALE-ESS-536A) all complete as per direction of Engr. in-

85 MR Providing and fixing Hand Shower/Health Faucet (ABS Body) with 1.20Mtr long 26,978

PVC tube & wall hook of make ESSCO of JAGUAR (ALE-ESS-583) all complete as per Each 29.00 930.28

direction of Engr. in-Charge.

86 MR Providing and fixing Stainless Steel Towel Rail 600mm long of make ESSCO of 28,402

JAGUAR (AEC-ESS-1111N) all complete as per direction of Engr. in-Charge.

87 MR Providing and fixing Wall Mixer with aerator including 115mm long bend pipe for 101,032

connection to overhead shower (with bush & piston diverter fitting) and wall

flange of make ESSCO of JAGUAR (MQT-ESS-5178KN) all complete as per direction

of Engr. in-Charge.

88 MR Providing and fixing European type WC with cistern for coupled WC of size 95,326

385x675x765mm including PP soft close seat cover, fixing accessories of make

ESSCO of JAGUAR (ECS-WHT-751P180SPPZ) all complete as per direction of Engr.

89 MR Providing and fixing European type WC of size 355x545x385mm with wall hung 57,896

cistern including drainage L bend pipe, gasket, close seat cover, hinges, fixing

accessories of make ESSCO of JAGUAR (ECS-WHT-551PNPP183NLZ) all complete as

per direction of Engr. in-Charge.

90 MR Providing and fixing Basin (Wall Hung) of size 455x350x165mm of make ESSCO of 53,581

JAGUAR (ECS-WHT-803) including fixing accessories and waste coupling of make

ESSCO of JAGUAR (ALE-ESS-544NFT) all complete as per direction of Engr. in-

91 18.52 Providing and fixing C.P. brass stop cock (concealed) of standard design and of

approved make conforming to IS:8931.

92 18.65 Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth

102mm, height of 75mm with concealed fitting arrangements, weighing not less Each 29.00 101.93 2956.06

93 17.33 Providing and fixing 600x120x5 mm glass shelf with edges round off, supported on

anodised aluminium angle frame with C.P. brass brackets and guard rail complete Each 29.00 992.62 28786.05

fixed with 40 mm long screws, rawl plugs etc., complete.

94 17.31 Providing and fixing 600x450 mm beveled edge mirror of superior glass (of

approved quality) complete with 6 mm thick hard board ground fixed to wooden Each 29.00 1486.75 43115.67

cleats with C.P. brass screws and washers complete.

95 17.22A Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make

and as per the direction of Engineer-in-charge.

96 17.35 Providing and fixing soil, waste and vent pipes :

17.35.1.2 Centrifugally cast (spun) iron socket & spigot (S&S) pipe as per IS: 3989 RM 105.00 1135.12 119187.38

97 17.38 Providing and fixing bend of required degree with access door, insertion rubber

washer 3 mm thick, bolts and nuts complete.

17.38.1.2 Sand cast iron S&S as per IS - 3989 Each 8.00 629.61 5036.91

98 17.39 Providing and fixing plain bend of required degree.

BILL OF QUANTITY

“Development of Hill view Guest House,under the work of Various Civil, Electrical, Water Supply, Horticulture, Hospitality jobs required

for Hockey World Cup-2023 and other jobs in Steel Township at Rourkela (Odisha)".

17.39.1.2 ITEM DESCRIPTION

Sand cast iron S&S as per IS - 3989 Unit

99 17.43 Providing and fixing single equal plain junction of required degree with access door,

insertion rubber washer 3 mm thick, bolts and nuts complete.

17.43.1.2 Sand cast iron S&S as per IS - 3989 Each 6.00 770.58 4623.49

100 MR-57 Lettering sign board, prohibitary board, maps etc. with multi-colour Asian (Apcolite) / 6,669

Nerolac brand paints in any language (Hindi, Oriya, English) over a coat of base Sqm 10.00 666.91

painting with all lead and lift as per instruction of Engr-In-Charge.

101 14.72 Providing and fixing double scaffolding system (cup lock type) on the exterior side,

up to seven story height made with 40 mm dia M.S. tube 1.5 m centre to centre,

horizontal & vertical tubes joining with cup & lock system with M.S. tubes, M.S. tube

challies, M.S. clamps and M.S. staircase system in the scaffolding for working

platform etc. and maintaining it in a serviceable condition for the required duration as

approved and removing it there after .The scaffolding system shall be stiffened with

bracings, runners, connection with the building etc wherever required for inspection

of work at required locations with essential safety features for the workmen etc. Sqm 432.00 300.27 129715.71

complete as per directions and approval of Engineer in-charge .The elevational

area of the scaffolding shall be measured for payment purpose .The payment will be

made once irrespective of duration of scaffolding. sqm 285.00

Note: - This item to be used for maintenance work judicially, necessary deduction for

scaffolding in the existing item to be done.

102 12.45 Providing and fixing false ceiling at all height including providing and fixing of frame

work made of special sections, power pressed from M.S. sheets and galvanized with

zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of

angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at

1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm

dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers

of 25x10x0.50 mm of required length with nuts & bolts of required size and other end

of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the

spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick

bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm,

at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I.

intermediate channel

with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every

junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges

of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help

of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval,

including fixing of gypsum board to ceiling section and perimeter channel with the

help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and

finishing to a flush finish of tapered and square edges of the board with

recommended jointing compound , jointing tapes , finishing with jointing compound in

3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable

for board, all as per manufacturer's specification and also including the cost of

making openings for light fittings, grills, diffusers, cutouts made with frame of

perimeter channels suitably fixed, all complete as per drawings, specification and

direction of the Engineer in Charge but excluding the cost of painting with :

12.45.1 12.5 mm thick tapered edge gypsum plain board

conforming to IS: 2095- (Part I) :2011 (Board with BIS certification marks)

103 12.45.4 Fully Perforated Gypsum Plaster Board of size 1200 x2400x12.5 mm having approx.

15 % perforated area with perforation size and pattern as approved by the

Engineer in-charge and as per manufacturer's specification, with all 4 side tapered Sqm 110.00 1562.60 171886.49

and backed by acoustical tissue with NRC value not less than 0.60

104 MR-49 Lettering sign board/ display board/ border/ symbol etc. with single or multi colour 11,970

fluorescent sticker in any language ( hindi, odiya,english) on a prepared base

/surface. the measurement will be paid as per the length/width of

sentence/symbol/border and height of stickers with complete all lead & lift as per Sqft 70.00 170.99

instruction of engr.-in-charge. where there will be difference of height of letters in

sentence, the height of small letter shall be considered for measurement.

BILL OF QUANTITY

“Development of Hill view Guest House,under the work of Various Civil, Electrical, Water Supply, Horticulture, Hospitality jobs required

for Hockey World Cup-2023 and other jobs in Steel Township at Rourkela (Odisha)".

12.5 Providing and fixing precoated ITEM DESCRIPTION

galvanised iron profile sheets (size, shape and pitch Unit Qty RATE

of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated

thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel

grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-

18 microns. Sheet should have protective guard film of 25 microns minimum to avoid

scratches during transportation and should be supplied in single length upto 12 metre

or as desired by Engineer in-charge. The sheet shall be fixed using self drilling /self

tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in

horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and

trusses and including cutting to size and shape wherever required

106 Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm

(+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in

240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and

polyester top coat 15-18 microns using self drilling/ self tapping screws complete :

107 8.32 Designing, fabricating, testing, installing and fixing in position Curtain Wall with

Aluminium Composite Panel Cladding, with open grooves for linear as well as

curvilinear portions of the building , for all heights and all levels etc. including:

(a) Structural analysis & design and preparation of shop drawings for pressure

equalisation or rain screen principle as required, proper drainage of water to make it

watertight including checking of all the structural and functional design.

(b) Providing, fabricating and supplying and fixing panels of aluminium composite

panel cladding in pan shape in metalic colour of approved shades made out of 4mm

thick aluminium composite panel material consisting of 3mm thick FR grade mineral

core sandwiched between two Aluminium sheets (each 0.5mm thick). The aluminium

composite panel cladding sheet shall be coil coated, with Kynar 500 based PVDF /

Lumiflon based fluoropolymer resin coating of approved colour and shade on face #

1 and polymer (Service) coating on face # 2 as specified using stainless steel

screws, nuts, bolts, washers, cleats, weather silicone sealant, backer rods etc.

(c) The fastening brackets of Aluminium alloy 6005 T5 / MS with Hot Dip Galvanised

with serrations and serrated washers to arrest the wind load movement, fasteners,

SS 316 Pins and anchor bolts of approved make in SS 316, Nylon separators to Sqm 48.00 4713.89 226266.69

prevent bi-metallic contacts all complete required to perform as per specification and

drawing The item includes cost of all material & labour component, the cost of all

mock ups at site, cost of all samples of the individual components for testing in an

approved laboratory, field tests on the assembled working curtain wall with

aluminium composite panel cladding, cleaning and protection of the curtain wall with

aluminium composite panel cladding till the handing over of the building for

occupation. Base frame work for ACP cladding is payable under the relevant

aluminium item.s The Contractor shall provide curtain wall with aluminium composite

panel cladding, having all the performance characteristics all complete , as per the

Architectural drawings, as per item description, as specified, as per the approved

shop drawings and as directed by the Engineer-in-Charge. However, for the purpose

of payment, only the actual area on the external face of the curtain wall with

Aluminum Composite Panel Cladding (including width of groove) shall be measured

in sqm. up to two decimal places.

108 10.28 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes,

channels, plates etc., including welding, grinding, buffing, polishing and making

curvature (wherever required) and fitting the same with necessary stainless steel

nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless

steel dash fasteners , stainless steel bolts etc., of required size, on the top of the KG 1116.00 645.05 719874.80

floor or the side of waist slab with suitable arrangement as per approval of Engineer-

in charge, (for payment purpose only weight of stainless steel members shall be

considered excluding fixing accessories such as nuts, bolts, fasteners etc.).

109 16.17 Fencing with R.C.C. post placed at required distance, embedded in cement concrete

blocks, every 15th post, last but one end post and corner post shall be strutted on

both sides and end post one side only, provided with horizontal lines and two

diagonals of barbed wire weighing 9.38 kg per 100 metres (minimum), between the

two posts fitted and fixed with G.I. staples on wooden plugs or G.I. binding wire tied

to 6 mm bar nibs fixed while casting the post (cost of R.C.C. posts, struts, earth work

and concrete to be paid for separately) :- Payment to be made per metre cost of total

length of barbed wire used.

BILL OF QUANTITY

“Development of Hill view Guest House,under the work of Various Civil, Electrical, Water Supply, Horticulture, Hospitality jobs required

for Hockey World Cup-2023 and other jobs in Steel Township at Rourkela (Odisha)".

16.17.1 ITEMofDESCRIPTION

Providing and fixing of barbed wire thickest barb two ply, four points @4" c/c for Unit Qty RATE

fencing with the existing R.C.C./angle iron/wooden fence posts true to line and as per RM 480.00 13.12 6296.14

the direction of the Engr-In-charge.

Total Amount (Civil) (A):- 18140791.62 1480886.32

Total Amount (Civil) (A):- 18140791.62 1480886.32