DEMOLITION AND RECONSTRUCTION OF SMQ AT SITE P AT AF STN THANE (PHASE-I)

Amount

NOTE: Schedule ‘A’ Part I to XV are under Ser No. 1.00 to 15.00. are Prepriced by MES. Bidders shall insert their lumpsum amount in the Green coloured field under Col-6 only.

Lump sum price worked out for BUILDINGS/ STRUCTURES as listed in Sch 'A' Part I.

Lump sum price worked out for DEMOLITION as listed in Sch 'A' Part II

Lump sum price worked out for EXCAVATION, EARTH WORK AND SITE CLEARANCE as listed in Sch 'A' Part III

Lump sum price worked out for INTERNAL ELECTRIFICATION as listed in Sch 'A' Part IV

Lump sum price worked out for INTERNAL WATER SUPPLY as listed in Sch 'A' Part V

Lump sum price worked out for SEWAGE DISPOSAL as listed in Sch 'A' Part VI

Lump sum price worked out for AREA DRAINAGE, DE-SILTING CHAMBER AND OIL/ GREASE SEPARATOR as listed in Sch 'A' Part VII

Lump sum price worked out for ROAD/ PATH/ HARDSTANDING as listed in Sch 'A' Part VIII

Lump sum price worked out for RETAINING WALL as listed in Sch 'A' Part IX

Lump sum price worked out for EXTERNAL ELECTRIFICATION as listed in Sch 'A' Part X

Lump sum price worked out for EXTERNAL WATER SUPPLY as listed in Sch 'A' Part XI

Lump sum price worked out for HOT WATER SUPPLY as listed in Sch 'A' Part XII

Lump sum price worked out for DG SET AND LIFT as listed in Sch 'A' Part XIII

Lump sum price worked out for FIRE FIGHTING SYSTEM as listed in Sch 'A' Part XIV

Lump sum price worked out for LIGHTENING PROTECTION as listed in Sch 'A' Part XV

SCHEDULE 'A' PART - XVI MISCELLANEOUS ITEMS is not prepriced by MES and prepriced rates indicates 0.0 under column 5 signifies this fact only. Bidder shall insert their rates in Green filed under Col-6.

DEMOLITION

Taking down submain wiring any type and any size complete all as specified and directed.

Taking down carefully geyser, electric meter of any make and type and depositing it to MES yard complete all as specified and as directed.

Taking down DB/ TPN (including MCCB/ MCB), main switch of any capacity complete all as specified and directed.

Taking down old unservicable LT XLPE cable any size complete all as specified and directed.

Taking down old unservicable RCC LT pole including light fititngs, GI clamps and looping box any size complete all as specified and directed.

Taking down old unservicable LT feeder box from foundation complete all as specified and directed.

Taking up or down GI tubing and connections of bore 80 mm complete all as specified and directed.

Material and labour for removing unservicable sluice valve of water supply lines by closing the openings with plug and preparation for new connection if required complete including demolition of valve pit chamber complete all as specified and directed.

INTERNAL ELECTRIFICATION

Material and labour for submain wiring with one run of three core PVC insulated and FR PVC sheathed copper cable of 10 sqmm multistranded copper coductor FRLSH cable, 1100 Volts drawn through and including PVC concealed conduits, heavy duty grade, ISI marked, 32 mm external dia with wall thickness not less than 1.8 mm with conduit accessories complete all as specified and as directed. Note: One run of cable and one run of conduit shall be measured and paid as one metre length of unit.

Material and labour for submain wiring with one run of three core PVC insulated and PVC sheathed copper cable of 10 sqmm multistranded copper coductor FRLSH cable, 1100 Volts drawn through cable tray of suitable size including saddle/ tightner and other fixtures required complete all as specified and as directed. Note: Cable tray shall be measured and paid separately.

Material and labour for submain wiring with one run of three core PVC insulated and FR PVC sheathed copper cable of 6 sqmm multistranded copper coductor FRLSH cable, 1100 Volts drawn through and including PVC concealed conduits, heavy duty grade, ISI marked, 25 mm external dia with wall thickness not less than 1.8 mm with conduit accessories complete all as specified and as directed. Note: One run of cable and one run of conduit shall be measured and paid as one metre length of unit.

Material and labour for submain wiring with one run of three core PVC insulated and FR PVC sheathed copper cable of 6 sqmm multistranded copper coductor FRLSH cable, 1100 Volts drawn through cable tray of suitable size including saddle/ tightner and other fixtures required complete all as specified and as directed. Note: Cable tray shall be measured and paid separately.

Material and labour for submain wiring with one run of three core PVC insulated and FR PVC sheathed copper cable of 4 sqmm multistranded copper coductor FRLSH cable, 1100 Volts drawn through and including PVC concealed conduits, heavy duty grade, ISI marked, 25 mm external dia with wall thickness not less than 1.8 mm with conduit accessories complete all as specified and as directed. Note: One run of cable and one run of conduit shall be measured and paid as one metre length of unit.

Material and labour for submain wiring with one run of three core PVC insulated and FR PVC sheathed copper cable of 4 sqmm multistranded copper coductor FRLSH cable, 1100 Volts drawn through cable tray of suitable size including saddle/ tightner and other fixtures required complete all as specified and as directed. Note: Cable tray shall be measured and paid separately.

Material and labour for submain wiring with one run of three core PVC insulated and FR PVC sheathed copper cable of 2.5 sqmm multistranded copper coductor FRLSH cable, 1100 Volts drawn through and including PVC concealed conduits, heavy duty grade, ISI marked, 25 mm external dia with wall thickness not less than 1.8 mm with conduit accessories complete all as specified and as directed. Note: One run of cable and one run of conduit shall be measured and paid as one metre length of unit.

Material and labour for submain wiring with one run of three core PVC insulated and FR PVC sheathed copper cable of 6 sqmm multistranded copper coductor FRLSH cable, 1100 Volts drawn through cable tray of suitable size including saddle/ tightner and other fixtures required complete all as specified and as directed. Note: Cable tray shall be measured and paid separately.

Material and labour for submain wiring with one run of three core PVC insulated and FR PVC sheathed copper cable of 1.5 sqmm multistranded copper coductor FRLSH cable, 1100 Volts drawn through and including PVC concealed conduits, heavy duty grade, ISI marked, 25 mm external dia with wall thickness not less than 1.8 mm with conduit accessories complete all as specified and as directed. Note: One run of cable and one run of conduit shall be measured and paid as one metre length of unit.

Material and labour for powder coated perforated type GI cable tray 14 SWG thick, height not less than 50 mm and width not less than 250 mm, along with cover of same width including tray joining accessories, clamps and fixtures etc. on OTS wall as mentioned in drawings complete all as specified and as directed.

Material and labour for TV socket along with non-metallic rigid PVC heavy duty conduit minimum 20 mm external dia concealed in wall from suitable entry point upto socket complete all as specified and as directed.

Supply, installation, commisioning and testing factory made and tested, CPRI test certified and approved, LT feeder pillar box (KIOSK) indoor type, platform mounted including suitable angle iron (4 No. legs) for 415 Volts 3 Phase 4 wire, 50 Hz AC supply system, all as specified and directed, having bus bar chamber with insulated copper bus bars 300 Amps rating installed on porcelain insulator. The panel shall be dust and vermin proof, made of 2 mm CRCA sheet 75 mm x 30 mm thick MS channel frame, duly powder coated finish, thimbling and cable entry boxes with cable gland including painting with two coat of synthetic enamel paint over a coat of red oxide primer, front and back opening type with aprons for cable entry with double door shutter and locking arrangement, danger plate and earthing terminal and suitable PCC work complete all as specified and approved and comprising following accessories: INCOMING: (i) MCCB 4 Pole 200 Amps, 36 KA, 415 V - 1 no. (from proposed commercial panel) (ii) Bus bar (copper strip) 300 Amp, 4 Nos (iii) Digital panel meter (Amp, Voltage meter) including CTs- 1 no. (iv) Digital indication lamp set- 1 no. OUTGOING: (i) MCB SPN 40 Amps, 230 V, 50 Hz- 30 no.s (ii) MCB TPN 32 Amps, 415 V, 50 Hz- 1 no. (spare) (iii) Slot for electronic energy meter- 26 no.s Note: Contractor shall submit GA drawing for approval of GE before procurement.

Supply and fix smart electronic meters tamper proof LCD display 240 Volt, 10-60 Amp capacity, atleast Class 1 with Class 1 CTs/ PTs and and having an active RS-485 port with industry standard Modbus protocol/ committable to energy management system with publically available maps complete all as specified and directed.

Supply and fix smart water meter accuracy class 1.0 IP67 with built in wireless Modbus/ LoRa/ RF with battery backup lasting atleast 7 years, including provision of two way communication from the meter to the data collector and enabling a meter to be read remotely through a communication system without the need for manual meter reading as well as enabling meter and/ or device control complete all as specified and directed.

INTERNAL WATER SUPPLY

Supply and fixing stop valve, angle valve 15 mm bore of pipe, minimum finished mass 0.575 kg each (ISI marked), fancy type, chromium plated with long shank and cup (concealed type) cast copper alloy screwed down, high pressure with crutch or butterfly handle screwed both ends for (externally threaded) for iron pipe or for union complete all as specified and directed. Note: Flow rate should not be more than 2.5 LPM as per GRIHA norms

Supply and fixing bib tap for 15 mm bore of pipe, minimum finished mass 0.575 kg each (ISI marked), fancy type, chromium plated with long shank and cup, cast copper alloy screwed down, high pressure with crutch or butterfly handle complete all as specified and directed. Note: Flow rate should not be more than 2.5 LPM as per GRIHA norms

Supply and fix two way bib cock, 15 mm dia (ISI marked), fancy type, chromium plated complete all as specified and directed. Note: Flow rate should not be more than 2.5 LPM as per GRIHA norms

Supply and fix pillar tap, cast copper alloy with capstan head, chromium plated with or without lettered HOT or COLD with long screwed for iron pipe and fixed to 15 mm bore pipe, complete all as specified and directed. Note: Flow rate should not be more than 2.5 LPM as per GRIHA norms

Supply and fix brass chromium plated shower rose with swivel joints, including fixing to steel pipe or union complete all as specified and directed. Note: Flow rate should not be more than 6.0 LPM as per GRIHA norms

Supply and fix forged brass pressure reducing valve screwed in bonnet spring loaded capable of handling maximum inlet pressure of 3.0 kg/cm2 and capable to deliver outlet pressure 0.5 to 1.5 kg/cm2 for diameter of pipe 80 mm bore complete all as specified and directed.

Supply and fix forged brass pressure reducing valve screwed in bonnet spring loaded capable of handling maximum inlet pressure of 3.0 kg/cm2 and capable to deliver outlet pressure 0.5 to 1.5 kg/cm2 for diameter of pipe 65 mm bore complete all as specified and directed.

Supply and fix forged brass pressure reducing valve screwed in bonnet spring loaded capable of handling maximum inlet pressure of 3.0 kg/cm2 and capable to deliver outlet pressure 0.5 to 1.5 kg/cm2 for diameter of pipe 50 mm bore complete all as specified and directed.

Supply and fix forged brass pressure reducing valve screwed in bonnet spring loaded capable of handling maximum inlet pressure of 3.0 kg/cm2 and capable to deliver outlet pressure 0.5 to 1.5 kg/cm2 for diameter of pipe 40 mm bore complete all as specified and directed.

Supply and fix forged brass pressure reducing valve screwed in bonnet spring loaded capable of handling maximum inlet pressure of 3.0 kg/cm2 and capable to deliver outlet pressure 0.5 to 1.5 kg/cm2 for diameter of pipe 25 mm bore complete all as specified and directed.

SEWAGE DISPOSAL AND AREA DRAINAGE

Material and labour for precast PCC solid block masonry walling 1:5:8, type C1 using 20 mm graded aggregate built in cement mortar 1:6, straight or curved on plan exceeding 6 m mean radius, exceeding 10 cm width and complete all as specified and directed.

ROAD/ PATH/ HARDSTANDING

Material and labour for machine pressed, coloured, precast concrete interlocking paver block with grey cement and no pigment, any shape and size conforming to IS 15658-2006 of 60 mm thickness, M-35 grade complete all as specified and as directed. Note:- Paver blocks should have solar reflective paint coating with SRI more than 50% and also contain minimum 10% C&D waste content by weight of block

Material and labour for machine pressed, coloured, precast concrete interlocking paver block with grey cement and no pigment, any shape and size conforming to IS 15658-2006 of 80 mm thickness, M-40 grade complete all as specified and as directed. Note:- Paver blocks should have solar reflective paint coating with SRI more than 50% and also contain minimum 10% C&D waste content by weight of block

Material and labour for providing and laying at or near ground level, factory made kerb stone of M-25 grade cement concrete, in position to the required line, level and curvature, jointed with cement mortar 1:3 ( 1 part cement : 3 parts coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not be more than 5 mm) including making drainage opening wherever required complete all as specified and as directed. Note:- Kerb stones should have solar reflective paint coating with SRI more than 50% and also contain minimum 10% C&D waste content by weight of block

EXTERNAL ELECTRIFICATION

Material and labour for boring of size 80 mm for road crossing in any kind of soil/ rock strata by using trench technology method complete all as specified and directed.

Material and labour for boring of size 100 mm for road crossing in any kind of soil/ rock strata by using trench technology method complete all as specified and directed.

“Supply &install ,testing and commissioning of transformer as per IS : 1180 part - I 2014 level-IIIOR Latest notification issued by BEE as on date of acceptance of tender, step down, copper wound 22KV/433 Volts (at no load) AC 3 phase 50 Hz 400 KVA capacity, core type, oil immersed naturally air cooled, oil natural air natural (ON/AN) , with external cooling tubes, delta connected on primary side (HV) and star connected on secondary side (LV) in accordance with vector group DYn-11 with neutral brought out on secondary side (LV) and having taping at +5% to 10% in steps of 2.5% on HV side to be changed by means of hand operated off load tap changer gear. The maximum temperature rise should not exceed 50 degree Celsius in oil and 55 degree Celsius in HV/LV winding when measured by resistance method after continuous full load run on an ambient temp of 40 degree Celsius transformer shall be of BOLTLESS core design. Transformer shall be double wound, core type with low loss, non ageing, high permeability prime grade CRGO with M4 grade or better, perfectly insulated and clamped to minimize noise and vibrations. The transformer shall be IS/IEC 60076and as per IS-1180 part - I of 2014 marked and shall comprise of the following :-

(a) One cable box on HT side (Primary side) consisting of three nos porcelain bushing with copper rods, complete with nuts and washer , with cable glands suitable for reception/taking out 3 core 95Sqmm, HT 22000 volts grade, XLPE insulated and PVC sheathed, heavy duty , armoured cables including jointing materials complete. (b) One cable box on LT side(secondary side) consisting of four nos porcelain bushing with copper rods, complete with nuts and washers, with cable glands suitable for reception/taking out 400 sqmm 3.5 core, LT 1100 volts grade, PVC/XLPE insulated and PVC sheathed, heavy duty, armoured cables including jointing materials complete. (c ) conservator with filter type drain valve and oil level gauge. (d) De-hydrating breather with first fill of dehydrating agent (Silica Gel). (e) Explosive vent, Thermometer pocket on tank cover, oil level gauge, Oil drain filter valve, Lifting ligs,oil filling hole with cap/plug with connection plate complete, Air releasevalve plug and four nos plain solid cast steel detachable rollers.

(f) One no 100 mm dia, dial type thermometer, vapour pressure type, having range 0-120 degree Celsius with metal guard having maximum perimeter temperature reading indicator with re-setting device. (g) Two earthing terminals on tank cover to facilitate fixing of 50x6mm galvanised iron earth strip for earthing of body. (h) Rating plate and terminal marking plate. (j) Extra bushing for neutral in the LT cable box for providing independent set of earthing for neutral. (k) First fill of new and unused transformer oil, IS-335 of 1986 marked, filtered and tested up to 50 KV dielectric strength at 2.5 mm air gap between testing electrodes, specific resistance at 27 Degree Celsius Ohm-om 500 x 10 the power12, water content 50 PPM, Dielectric dissipation factor (tan Deta at 90 degree Celsius) 0.005, Neutralisation value mg of KOH/gm of oil 0.03, Inter facial tension N/M at 27 Degree Celsius - 0.04, flash point 140 Degree Celsius and sluge 0.1 % by weight.

(l) Providing adequate size and nos of channels, embedded in floor, for movement of transformer. (m) Transformer losses shall not exceed the loses mentioned in IS: 1180 part-Iof 2014 Part - I with energy Efficiency level –IIIOR Latest notification issued by BEE as on date of acceptance of tender. (n) Oil temperature indicator. Note: (a) OEM should be BIS and BEE certified for all the ratings of the transformer that are to be submitted. (b) Rate quoted includes the cost of making and Testing of control wiring connection at the Transformer and RMU/VCB for the Temperature alarm/Trip, Gas alarm/Trip. And the Control cable shall be measured and paid separately under relevant item (c) Expenses / cost for FAT as nominated by the accepting Officer for FAT shall be included in the rate quoted. (d) The contractor should obtain warranty from OEM for minimum period of 5 years for all the transformer supplied.

Supply, laying and testing cable XLPE insulated, IS-7098 (Part-2), screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 22000 Volts grade with stranded aluminium conductor of size 95 sq mm 3core. Note:- Quantity mentioned are tentative. Cables are to be laid such that distribution losses not to be 1% as per requirement of GRIHA certificate (Ref ECBC 2017, Clause7.2.6).

Supply and fix cable jointing kit for 22 KV grade cable for outdoor termination heat shrink type joint complete with jointing material and accessories suitable for 3 core XLPE, armoured, Al conductor cable of size 70 to 95 sq mm complete all as specified and directed.

Supply and fix cable jointing kit for 22 KV grade cable for indoor termination heat shrink type joint (tapping point from existing VCB) complete with jointing material and accessories suitable for 3 core XLPE, armoured, Al conductor cable of size 70 to 95 sq mm complete all as specified and directed by Engineer-in-Charge.

Material and labour for platform for transformer of size 2000mm x 1500mm x 1200mm with brick masonry construction in cement mortar 1:4, PCC (1:4:8) type D-2, 150mm thick as in foundation, PCC (1:2:4) type B-1, 40mm thick as in floor over sub base PCC (1:4:8) type D-2, 75mm thick, brick masonry step on one side to make access to the top of platform including excavation and earth work in any type of soil including 15mm plastering to brick masonry in CM 1:4 and applying two coats of synthetic enamel paint over a coat of red oxide primer on steel surfaces and two coats of white wash on plastered surface complete all as specified and directed.

Supply and fix copper conductor cable 3 core of size 1.5 sqmm complete all as specified and directed.

Suppyling, installing, testing and commissioning of factory made outdoor type LT cubical panel board suitable for operation on 415 volts, 3 phase, 4 wire 50Hz supply system inlcluding bus bar chamber in centre (vertically) and cable alley either side, outer shell shall be made out of 3.15 mm thick CRCA sheet duly powder coated siemens gray shade and completely weather, vermin and dust proof, adequate air ventilation at sides and back, outer door shall be provided with double door fixed with hinges and locking arrangements etc. suitable to accomodate the following mentioned fittings and inner shell shall be made out of 2mm thick CRCA sheet duly powder coated and compartmentalized for each control gear including front openable single door with half knob type locking, inlcuding provision for taking out incoming and outgoing cables duly marked with reveted letter plated of appropriate size for each feeder/ block cable, danger board, detachable plate at bottom for cable entry etc. including double compression type cable gland with bottom frame made out of angle iron 40mm x 40mm x 5mm and 600mm long 4 legs duly painted with 2 coats of synthetic enamel paint over a coat of red oxide primer on exposed surfaces grouted in PCC 1:2:4 type B1 using 20mm graded stone aggregate blocks of size 30cm x 30cm x 60cm and 100mm thick PCC (1:2:4) type B1 floor over and including 100mm thick sub base of brick hardcore extended 100mm on all sides below panel body complete all as specified and directed with and including following accesories:-

INCOMING: (a) 1000 Amps Aluminium bus bar for phases and Neutral duly insulated with heat shrinkable PVC sleeves and colour coded mounted on heavy duty epoxy insulators in separate compartment and internally prewired - 01 Set (b) ACB 415 Volts, 630 Amp rating, 65 KA, 4 Pole microprocessor based - 01 No (c) ISI Marked Digital three phase multifunction meter with RS485 MODBUS Protocol, for parameter- voltage, current, frequency, PF, KW, kVA, kvar, kwh, kVAh,kVARh,MD,% THD up to 31stlevel,Accuracy Class-1 OUTGOING: (a) MCCB, 415 Volts, 630 Amp rating, 50 KA, 4 Pole microprocessor based - 01 No (b) MCCB,125 Amp, rating 4 Pole , 35 KA 415 Volts - 02 Nos (c) MCB SPN, 32 Amp, rating 2 Pole - 02 Nos (d) Infra red sensor based digital timer switch 16 Amp single phase - 01 No. (e) Internal all links and control cable and indicators - set of three

Suppyling, installing, testing and commissioning of factory made outdoor type LT cubical panel board suitable for operation on 415 volts, 3 phase, 4 wire 50Hz supply system inlcluding bus bar chamber in centre (vertically) and cable alley either side, outer shell shall be made out of 3.15 mm thick CRCA sheet duly powder coated siemens gray shade and completely weather, vermin and dust proof, adequate air ventilation at sides and back, outer door shall be provided with double door fixed with hinges and locking arrangements etc. suitable to accomodate the following mentioned fittings and inner shell shall be made out of 2mm thick CRCA sheet duly powder coated and compartmentalized for each control gear including front openable single door with half knob type locking, inlcuding provision for taking out incoming and outgoing cables duly marked with reveted letter plated of appropriate size for each feeder/ block cable, danger board, detachable plate at bottom for cable entry etc. including double compression type cable gland with bottom frame made out of angle iron 40mm x 40mm x 5mm and 600mm long 4 legs duly painted with 2 coats of synthetic enamel paint over a coat of red oxide primer on exposed surfaces grouted in PCC 1:2:4 type B1 using 20mm graded stone aggregate blocks of size 30cm x 30cm x 60cm and 100mm thick PCC (1:2:4) type B1 floor over and including 100mm thick sub base of brick hardcore extended 100mm on all sides below panel body complete all as specified and directed with and including following accesories:-

INCOMING: (a) 800 Amps Aluminium bus bar for phases and Neutral duly insulated with heat shrinkable PVC sleeves and colour coded mounted on heavy duty epoxy insulators in seprate compartment and internally prewired - 01 Set (b) MCCB 415 Volts, 500 Amp rating, 50KA, 4 Pole microprocessor based - 1 No (c) ISI Marked Digital three phase multifunction meter with RS485 MODBUS Protocol, for parameter- voltage, current, frequency, PF, KW, kVA, kvar, kwh, kVAh,kVARh,MD,% THD up to 31stlevel,Accuracy Class-1 OUTGOING: (a) MCCB, 415 Volts, 100 Amp rating, 25 KA TP - 06 Nos (b) MCCB, 63 Amp, rating 16KA TP, 415 Volts - 02 Nos (c) MCB SPN, 32 Amp, rating 2 Pole - 02 Nos (d) Infra red sensor based digital timer switch 16 Amp single phase - 01 No. (e) Internal all links and control cable and indicators - set of three

Suppyling, installing, testing and commissioning of factory made outdoor type LT cubical panel board suitable for operation on 415 volts, 3 phase, 4 wire 50Hz supply system inlcluding bus bar chamber in centre (vertically) and cable alley either side, outer shell shall be made out of 3.15 mm thick CRCA sheet duly powder coated siemens gray shade and completely weather, vermin and dust proof, adequate air ventilation at sides and back, outer door shall be provided with double door fixed with hinges and locking arrangements etc. suitable to accomodate the following mentioned fittings and inner shell shall be made out of 2mm thick CRCA sheet duly powder coated and compartmentalized for each control gear including front openable single door with half knob type locking, inlcuding provision for taking out incoming and outgoing cables duly marked with reveted letter plated of appropriate size for each feeder/ block cable, danger board, detachable plate at bottom for cable entry etc. including double compression type cable gland with bottom frame made out of angle iron 40mm x 40mm x 5mm and 600mm long 4 legs duly painted with 2 coats of synthetic enamel paint over a coat of red oxide primer on exposed surfaces grouted in PCC 1:2:4 type B1 using 20mm graded stone aggregate blocks of size 30cm x 30cm x 60cm and 100mm thick PCC (1:2:4) type B1 floor over and including 100mm thick sub base of brick hardcore extended 100mm on all sides below panel body complete all as specified and directed with and including following accesories:-

INCOMING: (a) 200 Amps copper bus bar for phases and Neutral duly insulated with heat shrinkable PVC sleeves and colour coded mounted on heavy duty epoxy insulators in seprate compartment and internally prewired - 01 Set (b) MCCB 415 Volts, 160 Amp rating, 35KA, 4 Pole microprocessor based - 1 No (c) ISI Marked Digital three phase multifunction meter with RS485 MODBUS Protocol, for parameter- voltage, current, frequency, PF, KW, kVA, kvar, kwh, kVAh,kVARh,MD,% THD up to 31stlevel,Accuracy Class-1 OUTGOING: (a) MCCB, 415 Volts, 100 Amp rating, 16KA TP - 01 No (b) MCCB, 40 Amp, rating 4 Pole, 25 KA, 415 Volts - 01 No (c) MCB SPN, 32 Amp, rating 2 Pole - 01 No (d) Infra red sensor based digital timer switch 16 Amp single phase - 01 No. (e) Internal all links and control cable and indicators - set of three

Note: For item Nos 61 to 63 Contractor shall submit GA drawing for approval Of GE before procurement.”

‘Supply and fix all in one LED solar street light complete with octagonal galvanished iron pole as per following specification including necessary earth work and PCC foundation and all as directed by Eng-in-charge. (a) Solar Street Light Specification (i)Wattage – 50W (ii)Solar Panel80 Watt mono crystalline 18v (iii)LED Life-50000 Hrs (iv) PIR Sensor (v) Protection- IP65 (vi)Battery LiFEpo4- 12.8V 36Ah (vii)Charge Controller – MPPT (viii)Hybrid(AC-DC) (ix)Full Load Working-6000LM (x)Lm/Watt- 120 lm (xi) Color Temp- 6000-6500K (b) Octagonal Pole (i) Pole Type- Octagonal (ii)Material – Aluminium (iii) Height- 07 mtr (iv)Feature- Galvanised Iron Pole (v) IP Rating- IP68 (vi)Surface Finish- Galvanised Iron (vii) Size- 135mm at Bottom & 70mm at Top (viii) Certification- ISI (ix) OEM warranty for 7 years.

EXTERNAL WATER SUPPLY

Supplying, laying, jointing, commissioning and testing 100 mm (4") bore centrifugally cast (spun) ductile iron pressure pipe with spigot and socketed ends class K-9, confirming to IS: 8329/ 2000 blast furnace slag cement with portland cement properties suitable for rubber gasket jointing/ tyton joints with inside cement mortar lining and black bitumen external coating, duly ISI marked and laid in trenches complete all as specified and directed. Note:- (i) DI fittings shall be measured and paid separately under respective items (ii) Excavation / earthwork shall be paid separately under respective item of schedule for excavation

Supplying, laying, jointing, commissioning and testing 150 mm (6") bore centrifugally cast (spun) ductile iron pressure pipe with spigot and socketed ends class K-9, confirming to IS: 8329/ 2000 blast furnace slag cement with portland cement properties suitable for rubber gasket jointing/ tyton joints with inside cement mortar lining and black bitumen external coating, duly ISI marked and laid in trenches complete all as specified and directed. Note:- (i) DI fittings shall be measured and paid separately under respective items (ii) Excavation / earthwork shall be paid separately under respective item of schedule for excavation

Supply and fix DI fitting confirming to IS upto 150 mm bore pipe line for reducing/ bends (any type radius and angle), tapers any type, straight, bend, increasing, decreasing or double socketed extra tee pieces, single branch Y junction, double branch, cross collars cap etc. complete all as specified and directed.

Supply and fix in replacement gun metal globe or gate valve 80 mm bore with iron wheel head, screwed both ends for iron pipes complete all as specified and directed.

Material and labour for construction of brick masonry valve pit of internal size 90cm x 90cm x 90cm including necessary excavation and earth work in soft/ loose soil, brick work, plastering, white wash, PCC coping, MS frame made out of angle iron of size 40mmx40mmx6mm, MS sheet cover of 3 mm thick fixed to angle iron frame by means of hinges welded to frame and painting with 2 coats of synthetic enamel paint over a coat of red oxide primer on steel surfaces and grouting the frame in PCC 1:2:4 type B-1 including handle and locking arrangement with one number 50 mm dia brass pad lock complete all as specified and directed. Note:- (i) Brick wall shall be 23 cm thick built in cement mortar (1:4) (ii) Internal plaster shall be 15 mm thick in cement mortar (1:4) and external plaster upto 450 mm from top shall be 20 mm thick in CM (1:6) and remaining external surface shall be flush pointing in CM (1:6) as the work proceeds (iii) PCC in foundation shall be 15 cm thick in cement concrete (1:4:8) type D2 using 40 mm graded stone aggregate extended 15 cm all around from the external face of the walls (iv) PCC coping shall be 15 cm thick in cement concrete (1:2:4) type B1 using 20 mm graded stone aggregate including grouting of angle iron frame in PCC (v) Three coats of white wash to internal surfaces of valve pit (vi) Depth of valve pit shall be reckoned from the top of PCC in foundation

Supplying, installation, commissioning and testing of centrifugal pump set BEE 5 Star rating, electic motor driven, not less than 7.43 LPS at 65 metre head in load, suitable for pumping raw water, complete all as specified and directed and comprising of the following specifications:- (i) Pump, centrifugal, horizontal, split type not less then 7.43 LPS discharge, at 65 metre head, 1440 RPM having bronze impeller and stainless steel shaft single stage directly coupled with electric motor through flexible copling (ii) Squirrel cage indication motor, TEFC, 3 phase 415 + 10 volts, 50 C/S AC supply 1440 RPM, not less then 12.5 HP directly coupled to centrifugal pump (iii) Common base foundation of ISMC - 100 suitable for installation of above pump set duly drilled holes and painted with two coats of synthetic enamel paint over a coat of red oxide primer (iv) Above ISMC foundation shall be grouted in PCC 1:3:6 type C-2 using 40mm graded aggregate, 30 cm above GL and 15 cm below GL and as per size of common base foundation/ standard Engg practice or as directed by Engineer-in-Charge. (v) Boudrons type pressure gauge 3" dia dial type Make :- Kirloskar Brothers Ltd / Beacon / KSB / Jyoti Note:- Sluice valve and reflux valve, DI pipe and fittings etc. required for suction and delivery and common header etc. shall be measured and paid separately in respective items.

Suppyling, installing, testing and commissioning of factory made indoor type LT cubical panel board suitable for operation on 415 volts, 3 phase, 4 wire 50Hz supply system inlcluding bus bar chamber in centre (vertically) and cable alley either side, outer shell shall be made out of 2 mm thick CRCA sheet duly powder coated siemens gray shade and completely weather, vermin and dust proof, adequate air ventilation at sides and back, outer door shall be provided with double door fixed with hinges and locking arrangements etc. suitable to accomodate the following mentioned fittings and inner shell shall be made out of 2mm thick CRCA sheet duly powder coated and compartmentalized for each control gear including front openable single door with half knob type locking, inlcuding provision for taking out incoming and outgoing cables duly marked with reveted letter plated of appropriate size for each feeder / block cable, danger board, detachable plate at bottom for cable entry etc including double compression type cable gland with bottom frame made out of angle iron 40mm x 40mm x 5mm and 600mm long 4 legs duly painted with 2 coats of synthetic enamel paint over a coat of red oxide primer on exposed surfaces grouted in PCC 1:2:4 type B1 using 20mm graded stone aggregate blocks of size 30cm x 30cm x 60cm and 100mm thick PCC (1:2:4) type B1 floor over and including 100mm thick sub base of brick hardcore extended 100mm on all sides below panel body complete all as specified and directed with and including following accesories:-

INCOMING: (a) 100 Amps copper bus bar for phases and neutral duly insulated with heat shrinkable PVC sleeves and colour coded mounted on heavy duty epoxy insulators in separate compartment and internally prewired - 01 Set (b) MCCB 40 Amps, 25 KA, 4 Pole, thermal magnetic release type - 01 No (c) ISI Marked Digital three phase multifunction meter with RS485 MODBUS Protocol, for parameter- voltage, current, frequency, PF, KW, kVA, kvar, kwh, kVAh,kVARh,MD,% THD up to 31stlevel,Accuracy Class-1 OUTGOING: (a) MCCB 32 Amps, 16 KA, TP, thermal magnetic release type - 02 No (b) MCB SPN 32 Amps - 02 Nos (c) Internal all links and control cable and indicators - set of three (d) Single phase preventer type SDz5, SPPR + Timer, 415 V - 01 No (e) Fully automatic star delta starter type ML1 FASD having relay of range 09 - 14 Amp - 02 No (f) Infra red sensor based digital timer switch 16 Amp single phase - 01 No. Note: Contractor shall submit GA drawing for approval Of GE before procurement.

Supply and fix copper conductor cable 3 core of size 10 sqmm complete all as specified and directed.

Supply and fix globe valve conforming to IS 9338, for 100 mm dia pipe complete all as specified and directed.

Supply and fix cast iron foot valve for 100 mm bore pipe, lift flanged type as per IS-4038 complete all as specified and directed.

Material and labour for boring of size 125 mm for road crossing in any kind of soil/ rock strata complete all as specified and directed.

Material and labour for boring of size 200 mm for road crossing in any kind of soil/ rock strata complete all as specified and directed.

DG SET AND LIFT

Supply, Installation and testing of ‘Silent with acoustic enclosure ’water cooled Diesel Engine driven Prime duty Generating Set of net capacity after all de-rating factors net of not less than 82.5 KVA/66 KW ,50Hz 415 volt 3 phase, 4 wire,0.8 lagg,turbo charged diesel engine as per IS-: BS5514/ISO3046 and alternator as per IS-13364 along with AMF system with Acoustic Enclosure exhaust silencer-residential in line , as per the noise emission standards laid down by MoEF / CPCB Norm along with emission control device as per latest pollution/Green Tribunal norms with necessary accessories.

A) Engine comprising of the following: Rugged engine natural liquid cooled (EG Complete 50:50) with radiator as secondary media with world class OEM such as Cummins/Perkins/Kohler/Greaves/Ashok Leyland Engines for powered diesel generator set along with these specifications of Advanced in-cylinder technology turbo charged , air cooled aspirated to meet latest emission norms without any after-treatment device. Class defining technology engine is designed to meet stringent exhaust emission tests as per revised MoEF norms, thus offering environment friendly power Compact in size with optimum power to weight ratio, 4 cylinder, In-line 4 stroke, radiator cooled engine Well designed air handling system with Dry type, heavy duty, replaceable paper element air cleaner with restriction indicator, Air to air after cooling, Optimised turbocharger for increased altitude capabilities, Best in class fuel economy with Inline fuel pump with A1 class Electro mechanical governing, Spin on fuel filter, Standard integral set-mounted radiator system, designed and tested for 50°C ambient temperature, Full flow spin on lube oil filter, First fill of lube oil and coolant, Electrical starter motor with soft start engagement feature, Battery charging alternator,1 x 12 V DC battery/Alternator

b) Alternator PMG type comprising of the following: Alternator Brushless type, Screen protected, Revolving field, Self excited alternator conforming to IS/IEC 60034-13 Phase re-connectable winding with 12 terminals brought out for connection Dedicated winding specially designed for 1 phase and 3 phase operation Better motor starting capability Best in class efficiency Compact design with sealed bearings for longer life and lesser maintenance Impregnation on all wound components for better mechanical strength with Alternator of IP 23, Voltage regulation (Max.)±1%, Class of Insulation H Class, Winding Pitch 2/3,Stator Winding Double layer lap Rotor Dynamically Balanced, Waveform distortion/ Total Harmonic Distortion No load < 1.5 %, Non distorting balanced linear load < 5 %,Maximum Unbalanced Load across phases less than or equal to 25%, Telephonic Harmonic factor < 2% alternator capacity output shall not be less than 82.5 KVA / 66KW ,50Hz 415 volt 3 phase, 4 wire,0.8 lagg. 114.3 Amp / phase

Control Panel comprising of the following: c) AMF / Control panel is manufactured with 14/16 gauge CRCA sheet and is powder coated for weather-proof and long lasting finish. The control panel consists of the following parts of makes as per OEM recommendation: microprocessor based generator set monitoring and control system. along with AMF Functionality is inbuilt and this control includes an intuitive operator interface that allows for complete generator set control as well as system metering, fault annunciation, configuration, and diagnostics, Copper bus bars with suitable capacity with incoming/outgoing terminals, Indicating lamps for ‘Load ON’ and ‘Set Running’, Instrument fuses / MCBs duly wired and ferruled, Circuit breakers of suitable rating with overload and short-circuit protections. with motorised change overs /on load power contactors with copper bus bars, cables and protective accessories with load / bypass arrangements

Residential type silencer Critical grade silencer suitably optimized to meet stringent noise emission standards laid down by MoEF / CPCBalong with MS supporting structures .along with thermal Insulation on horizontal pipe with Mineral Wool/ Asbestos Rope 50mm Thick wire mesh and 26 gauge aluminium cladding (12") d) Controller should be compatible to the following specifications: (i)AMF Functionality controllers of Makes from the OEM : Deep Sea/ Cummins/ Wood Ward/ Com Amp (II) Intuitive operator interface which includes LED backlit128X64 pixel graphic display with tactile feel soft-switches. Indications - Generator set, Utility Status Lamp. (iii)Remote start-stop with Engine Metering: Oil pressure, Engine temperature, Starting battery voltage, Engine running hours (iv)AC Alternator Metering: L-L Voltage and L-N Voltage, Current (phase and total), kVA (phase and total) and Frequency. kwh, Total & per phase (kw & kVA), PF, Utility Voltage and Freq. (v)Engine Protection: Low lube oil pressure, High/Low coolant temperature, Battery Over/Under/Weak Volts, Fail to Crank/Start, Sensor failure, Cranking lockout, Low fuel level. (vi)AC Alternator Protection: Over/Under Voltage, Over/Under Frequency, Loss of AC sensing. Over speed, Over Current. (vii)Data Logging: Engine hours, Control hours and up to 5 recent fault codes

(viii)Configurable glow plug control, Cycle Cranking (ix)12/24 Volt DC operation, Sleep mode,Modbus interface (RS485 RTU),In Power compatible (PC based service tool),Certifications - meets the requirement of relevant ISO, EN,Mil Std. and CE standards (e)Maintenance due alarm based on Engine Run Time and due date, Exerciser scheduler (f) Remote HMI, Digital electronic governor with temperature compensation and smooth starting, digital AVR for shunt of PMG exciter with Torque monitoring (e) All pipe line connections, valves etc. required for the lube oils, fuel and cooling system (f) Battery & Battery charger of rated capacity as per the alternator/ Engine compatibility (g) Mounting Arrangement shall be of the following: (i) Engine and alternator are mounted on a common MS fabricated base frame with AVM pads. (ii) Base frame with integral fuel tank is provided with drain plug, air vent, inlet and outlet connection, level indicator and provision for cleaning

(h) Fuel Tank of capacity 12 hrs running capacity along with Fuel pipe MS c class 25mm ID with bends , flanges , valves, tees and bends. (I) Residential type silencer with MS pipe as designed by the OEM horizontal Exhaust pipe complete with bends and flanges of adequate length not less than 10 Mtr.along with thermal Insulation on horizontal pipe with Mineral Wool/ Asbestos Rope 50mm Thick wire mesh and 26 gauge aluminium cladding (12") (j) Control / service cables shall be of 4cx 2.5 sqmm, 24 c x 2.5 sqmm , 2 c x 2.5 sqmm, and 8c x 0.75 sqmm shielded control cables ,pvc insulated copper armoured, control panel for auxiliaries with starters for pumps, heaters etc (k) RCC foundation with necessary earth work ,PCC 1:4:8 type D-2 (40mm graded stone aggregate) as in foundation, filling and mass concrete / RCC M-30 (20 mm graded aggregate) as in foundations, Plinth beam along with necessary form work / TMT bars of 10mm dia and over cut to length bend to shape required including cranking, bending, spirally for hooping for columns, hooking ends and bidning with and including MS wire (annealed) not less than 0.9mm dia securing with clips / 10 mm thick plastering on fair faces of brick work or concrete surface in CM (1:6),even and smooth without using extra cement / Sand filling in layers around the foundation including watering and consolidation as per OEM dimensions

(l) Acoustic Enclosure shall comprise of the following (i)Specially designed to meet stringent MoEF/ CPCB norms of75 dBA @ 1mtr at 75% load under free field conditions (ii) The Acoustic Enclosure as per Latest CPCB Norms is made of CRCA sheets in Munselgreen shade and a structural/ sheet metal base frame painted in black. or any other standard colour as specified by the OEM (iii) High quality noise absorbent and fire-retardant grade acoustic insulation material (P.U. Foam) complying to IS8183 designed to have optimum serviceability (iv) Air inlet louvers specially designed to operate at rated load, Made on special purpose CNC machines for consistency in quality and workmanship (v) 11 tank pre-treatment process and UV resistant powder coating of all parts to withstand extreme environment, Use of special hardware for longer life, Flush styling - no projections, Fluid drains for lube oil and fuel,Fuel filling arrangement inside the enclosure Note:- (i) DG losses shall meet ECBC 2017 norms and must be BEE 3 STAR Rated.

Suppy, installation, testing, commissioning, putting into operation and final testing of automatic lift of 8 passengers capacity (544 kg), MRL type, energy efficient complete in the shaft well and pit constructed including automatic rescue device (ARD), all standard equipments,accessories and control equipments as per manufacturer design, conforming to NBC/ local by laws and fulfilling the following requirements complete all as specified and directed:

(xv) Landing door: S.S(Stainless steel) Hairline finish centre/ Telescopic opening door with with vision panel. Lift landing doors shall have minimum fire resistance of two hours. (xvi) Door Operation: Automatic electric power operated door, full height infra red curtain with multiple criss/ cross light beams (xvii) Car interior: S.S (Stainless steel) panel with hair line finish on all sides. (xviii) Car floor: Anti skid PVC flooring on heavy duty MS (Mild steel) platform (xix) Car ceiling and lighting: S.S (Stainless steel) finish with aesthetic appearance with LED ceiling lights (xx) Car Ventilation: Pressure fan/ blower fan (Car fan with automatic sleep timer shall be provided) (xxi) Emergency lighting in car: Battery operated emergency lighting in the lift car (xxii) Intercom system: Battery operated Intercom system in lift car,machine room and ground floor/ control room (xxii) Emergency alarm: Battery operated alarm bell system in lift car and control room/ ground floor (xxiii) All car panel buttons and all floor switches must be with brail language and audio assistance in lift for visually impaired people as per GRIHA Norms and lift act. (xxiv) Audio visual indication in the lift car showing overloading shall be provided such that doors are kept open till excess load removed. (xxv) Spring buffer/hydraulic buffers shall be provided. (xxvi) Mechanical over speed governor, door key holes in the floor doors shall be provided. (xxvii) Lift machine hoisting arrangement in the head room and monkey ladder for lift pit should be provided by the lift agency, along with the other steel structure works, foundations for the machines etc.

(xxviii) In the hoist way fascia plate shall be provided. (xxix) Permanent lighting in the head room and lift well with proper no. of light point, with fixtures, exhaust fan, plug point and 3 phase 440V power supply shall be made available by the department in the lift shaft, head room or at desired level (xxx) Car top safety barricade shall be provided (xxxi) ARD (Automatic Rescue Device): Solid state inbuilt automatic rescue device (ARD) for automatic rescue of passengers trapped in the lift car in between floors in the event of power failure. Automatic operation and immediate action in the event of mains failure capable to move the lift to the nearest landing, opens the automatic door of the lift car and floor. Sealed maintenance free battery backup with automatic charging unit and auto changeover device on main failure

Note:- One lift of 8 passenger capacity is to be used as passenger lift and the other one to be used as firemen lift to be effective in fire fighting operation. The firemen lift shall have the following requirements. (i) The firemen's lift may be used by the occupants in normal times. (ii) The firemen's lift shall be provided with a firemen switch. The switch shall be a two position (ON/OFF) switch fixed at the evacuation floor (Normally main entrance floor) for enabling the lift to be put into firemen's mode. The switch shall be situated in a glass fronted box with suitable level and fixed adjacent to the lift at the entrance level. When the switch is on, landing call points shall become inoperative and the lift shall be on car control only or on a priority control device. When the switch is off, the lift will return to normal working. (iii) The firemen's lift shall be provided with an audio and visual signal in car. (iv) The firemen's lift shall have a floor area of minimum 1.43 sqm. It shall have loading capacity of not less than 544kg (8 person lift). (v) The firemen's lift shall be provided with power operated (automatic) doors of minimum 0.8 mtr width. (vi) The speed of firemen's lift shall be 1 m/s or more such that it can reach the top floor from main floor/ firefighter access level within 1 minute incase of building zoned, the firemen's lift shall operate from the lowest served landing to the top most served landing in 1 min. (vii)The words "Firemen lift" shall be conspicuously displayed in fluorecent paint on the lift landing (viii) All other operation requirements of firemen's lift (ix) Audio system and braille keypad for universal design

All as per item No. 78 above but lift of 13 passengers capacity (884 kg)

Suppyling, installing, testing and commissioning of factory made Indoor type LT cubical panel board suitable for operation on 415 volts, 3 phase, 4 wire 50Hz supply system inlcluding bus bar chamber in centre (vertically) and cable alley either side, outer shell shall be made out of 2 mm thick CRCA sheet duly powder coated siemens gray shade and completely weather, vermin and dust proof, adequate air ventilation at sides and back, outer door shall be provided with double door fix with hinges and locking arrangements etc. suitable to accomodate the following mentioned fittings and inner shell shall be made out of 2mm thick CRCA sheet duly powder coated and compartmentalized for each control gear including front openable single door with half knob type locking, inlcuding provision for taking out incoming and outgoing cables duly marked with reveted letter plated of appropriate size for each feeder/ block cable, danger board, detachable plate at bottom for cable entry etc. including double compression type cable gland with bottom frame made out of angle iron 40mm x 40mm x 5mm and 600mm long 4 legs duly painted with 2 coats of synthetic enamel paint over a coat of red oxide primer on exposed surfaces grouted in PCC 1:2:4 type B1 using 20mm graded stone aggregate blocks of size 30cm x 30cm x 60cm and 100mm thick PCC (1:2:4) type B1 floor over and including 100mm thick sub base of brick hardcore extended 100mm on all sides below panel body complete all as specified and directed with and including following accesories:-

INCOMING: (a) 200 Amps copper bus bar for phases and Neutral duly insulated with heat shrinkable PVC sleeves and colour coded mounted on heavy duty epoxy insulators in separate compartment and internally prewired - 01 Set (b) MCCB 100 Amps, 25 KA, 4 Pole, thermal magnetic release type - 01 No (c) ISI Marked Digital three phase multifunction meter with RS485 MODBUS Protocol, for parameter- voltage, current, frequency, PF, KW, kVA, kvar, kwh, kVAh, kVARh, MD,% THD up to 31stlevel,Accuracy Class-1 OUTGOING: (a) MCCB 32 Amps, 16 KA, 4 Pole, thermal magnetic release type - 05 No (b) MCB SPN 32 Amps - 03 Nos (c) Internal all links and control cable and indicators - set of three (d) Single phase preventer type SDz5, SPPR + Timer, 415 V - 01 No (e) Fully automatic star delta starter type ML1 FASD having relay of range 09 - 14 Amp - 05 No

Supply, installation, engineering commissioning and testing of Complaint cell/Maintenance/Energy Management/Electrical & Water Supply Installation level SCADA along with all software and hardware supplied and installed separately, essentially for monitoring and controlling of all the single phase/three phase energy meter up to 500 nos, Water Meters 104, LT Panels-10 Nos, Transformer-02 Nos, DG Sets-02 Nos along with provision for future expansion on IEC61850/latest platform via respective IED relays and capturing energy parameters on ModBus platform via respective Meters/ controllers all including required operator workstation, power-backup system and allied accessories, comprising of:

(I) SCADA Console: (i). Industrial grade, continuous duty, EMC compliant Remote Terminal Unit (RTU) / Data Concentrator Unit (DCU) /Energy Management system comprising of management of single phase/three phase energy meter up to 500 nos, Water Meters 104, LT Panels-10 Nos, Transformer-02 Nos, DG Sets-02 Nos unit (SMU) stand-alone function, combination of (a) gateway for interfacing with relays over IEC61850, meters on ModBus and upper-level SCADA/DCS on IEC-104 protocol, DT and panel data in analog format through AI converters as per site reqmnt (b)Online/Off line web-browser based, platform independent HMI for viewing Energy Management system comprising of management of single phase/three phase energy meter up to 500 nos, Water Meters 104, LT Panels-10 Nos, Transformer-02 Nos, DG Sets-02 Nos substation dynamic SLD. ON/OFF/TEST/ SERVICE position, energy parameters like line-current, line voltage, kVA, kW, kWh, PF,MD, Hz etc. Data event record of all parameter indicated,instant record of daily,weekly,monthly and yearly consumption of energy meters/water meters/DG sets/transformers,and fault record viewing, power ON/OFF control and as specified

(c) Life time licensed SCADA software suitable for display of data through suitable UI on HMI/server including integration and development of data base as per site reqmnt with reporting software and as directed (d) Data Historian for automatically downloading all disturbance recorder data and making it available for online view over analyser or off-line view via COMTRADE file. (i) Communication Protocols IEC 60870-5-104, DNP3, IEC 61850 and Modbus (ii) Ports 3 x RJ45 Ethernet, 2 x RS 485, and 1 x RS 232 (e) Minimum 32 DI, 16 DO (may be extended as per site reqmnt) (f) Operating Voltage Range 24 V DC, +/- 15% (g) Security Protocols IPsec, SSL and SRTP (h) Cyber Security as per IEC62351 & IEC62443 (j) Protection Degree IP 54

(l) Support two redundant physical channel communication to one control centre. (ii). Industrial grade managed type Ethernet networking switch (KEMA Certified) for star-coupler connection to all electrical and water supply energy management items mentioned above over IEC 61850 platform and upper level scada on IEC 104, suitable with 24 V DC supply and have minimum 16x10/100/1000 Base-T RJ45 and 2xFO ports. (iv) Cabinet with multi-tier-arrangement having suitable ventilation and cable-entry/routing arrangement to respective devices in a neat fashion (suitable for installation in dust-proof environment) of minimum dimension 1000x800x300mm, made of 2 mm CRCA sheet, glass on front door, IP 55, conforming to IEC 60529 and having following:- (a) Power Supply module 110-230/24V DC, 5A – 01 No (b) Power Supply redundancy module, 24V DC, 10A – 01 No (c) Door Limit Switch (d) Illumination Light (e) Control MCB (f) Space Heater with Thermostat (g) Air Filter Louver with Fan (h) Panel wiring & other accessories as per OEM recommendation

(v) LAN Cable (CAT5/CAT6) with sufficient number of RJ-45 terminals, suitably routed via substation trenches/ducts/walled-pipes including cable tray/conduit as per site conditions from 11 kV HT VCB Panel/UPS/other equipmentsup to Ethernet switch / RTU module and from existing 11KV Sub Station, old server room, new server room to SCADA console complete. (vi) PVC Shielded, three-core 4 sqmm wiring suitable for 230VAC supply routing from nearest 16Amp power-point upto UPS/Inverter and from inverter upto SCADA console and workstation, suitably laid via conduit pipes and jointed using recommended termination/socket arrangement in a neat fashion as per instruction of engineer-in-charge. (vii) PVC insulated and sheathed Copper control cable 1.0 Sqmm x 2 core for Modbus communication via daisy chain, with isolation MCBs and suitably routed via substation trenches/ducts/walled-pipes including cable tray/conduit as per site conditions from all Modubusequipments to SCADA console. (viii) Integration of all electrical and water supply energy management items mentioned above and MFMs with RTU module, tagging of data points as per requirement of upper level SCADA, integration with upper level SCADA control centre on IEC 104 complete all as specified and as directed.

(ix) Any other item/service required for complete system delivery of SAS is deemed to be included in the present scope of work and no extra claim shall be entertained in this regard. (II) Operator Workstation-01 Nos (1 No for MES Complaint Cell, comprising of the followings:- (i)Commercial grade desktop complete set including ups with 32" HD screen, 500GB HDD, 08GB DDR3 RAM, Intel Core i5, 02-USB port, Ethernet RJ45 port (Lenovo ThinkPad or equiv. in Dell/HP/Toshiba) with minimum 03-year OEM warranty (ii) Basic software incl. Windows OS, Antivirus of reputed make (Quick Heal/McAfee/Norton), MS-Office 2016/365, all having valid single-user commercial license with preferably unlimited but min. 03-years subscription (iii) Engineering software for all items as mention above, viewing Disturbance Recorder and Fault Analysis data and Gateway application for free lifetime. (iv) Ergonomic Table-chair arrangement for 01-user with suitable neatly hidden channels for routing of aux. and LAN cable for interfacing with Substation Management Unit. (v) Un-interrupted Power Supply/Inverter 230V AC regulated sine-wave inverter of 900VA capacity, minimum 100AH Lead-Acid battery, having advanced digital display, audio alarms on mains fail, charger fuse blown, battery-low and no-load shutdown, phase-reversal protection etc. as required

(vi) Communication and Power Wiring – including supply, laying and commissioning of:- (III) Supply, Designing, Engineering, Installation, Integration, Commissioning and Testing of communication equipment (E1 multiplexer) including cabinet, fibre optic cable termination and integration with OFC /dual sim based modem as per site and system requirement, all including connection to SCADA console and allied accessories, comprising of: (i) VCL-8EI over Multiplexer with IEEE1588(TDM over IP), 19-inch 3U HighRack mount version (max Two (2) slots meant for optional Ethernet Switch Cards). (ii) Supports :upto 8xE1(RJ45(F), 4x Ethernet Ports (1000Mbps, Gigabit) (4x Electrical ot Optical Ethernet port in any combination - User Configurable) , 4x Electrical Ethernet ports (RJ 45 (F), 4x Optical Ethernet ports (SFP based/without SFPs). (iii) IEEE1588v2 Time and Frequency Synchronization, Layer 2 swith, 1x IRIG-B Interfaces (Outputs), 1 x IPPS+NMEA interface (Input), High Stability Timing, GPS Synchronization, Management : SNMP, Telnet (RJ45 (F) Port), Serial Port (USB), DB-9 COM), EMS, Graphical User Interface (GUI), Installation Kit : System Core Cables, Mounting Hardware, Documentation, User Manual. (iv) 1.25 Gbps SFP Transceiver, uplex LC. 1310mm,15 Km, SMF,+3.3 V, MSA,RoHS - 02 Nos.

Supply, laying, jointing and testing of armoured optical fibre underground cable, 12 Pair (fibre) along with light interfacing unit laid in trenches/ducts/fixed on poles/walls, laid under/path or encased in HDPE pipe complete all as specified and directed.

M&L for high density polyethylene pipes of size 40 mm dia (HDPE) of pressure rating 10 kg/cm2 laid in trenches/ducts/ bore holes of road crossing/hard standing etc for laying of Cat cable /OFC cable complete all as specified and directed.

FIRE FIGHTING SYSTEM

Material and labour for PN 1.6 rated 150 mm NB cast iron (CI) sluice valve, conforming to IS 14846: 2000 with cast iron body and bonnet, SS spindle and stem conforming to IS 6603: 2001, cast iron stuffing box, carbon steel stud/ bolt/ nut and washer, hand wheel operated and flange end connection conforming to IS 1538: 1993 with necessary accessories complete all as specified and directed. Make: Leader, Sant, Venus, Tyco-Grinnell, Zoloto, RB or equivalent

Supply, installation, testing and commissioning of FM approved and UL listed Network Control Display (NCD)/ Repeater Panel capable of full supervision of all inputs and network integrity, having 10" high definition 1024 X 600 colour touchscreen display, environmental adjustment controls to maximize LCD legibility, LED status indicators (for power supply and off normal condition), network connection, three USB connections, trouble relay, tamper and trouble inputs, etc. and features viz. network-wide acknowledge silence, reset, lamp test, fully programmable node-mapping subsystem, colour coded icon based event notification, event vectoring, etc. along with UL listed non-resettable 24 VDC power source complete all as specified and directed. Make: Notifier NCD or equivalent model of JC, Esser

Supply, installation, testing and commissioning of UL listed (fire fighter's) addressable telephone jack mounted to a single-gang electrical back box with suitable interface module for two way communication with the Central Fire Fighter Telephone Console complete all as specified and directed. Make: Notifier FPJ + FCM-1 or equivalent model of JC, Esser

Supply, installation, testing and commissioning of UL listed Fire Fighter's Telephone Handset for two way communication with the Central Fire Fighter Telephone Console complete all as specified and directed. Make: Notifier FHS or equivalent model of JC, Esser

Supply, installation, testing and commissioning of UL listed all purpose 2 W Ceiling Speaker having crush and rust resistant design and fully ABS plastic & ABS grille with tap-setting range between 1/4 W and 2 W, rated (RMS) voltage 70.7 V, sound pressure level at 1 W (1 m & 1 kHz) 80 ± 4 dB, frequency response 125 Hz- 16 kHz, (-10 dB with reference to 1 kHz), complete all as specified and directed. Make: Notifier NF-SP100CI/UL or equivalent model of JC, Esser

Supply, installation, testing and commissioning of UL listed Digital Audio Amplifier capable of accessing and processing one of up to eight audio channels on the DVC audio loop, amplifying the signal and distributing it via eight Class B (speaker line) outputs having two wire digital audio ports to connect to wire DAL (digital audio loop) segments, Firefighter telephone riser supporting 7 active firefighter telephones, 300 W total output at 70 V (RMS) complete all as specified and directed. Make: Notifier DS-DB + DS-AMPE or equivalent of JC, Esser

Supply and fix plug-in Gas Leak Detector to provide an early warning for LPG or CNG / PNG gas leakage from cylinders or through pipelines calibrated to give an alarm at about 2000 ppm along with separate heat and gas sensors with LEDs, audible buzzer alarm, etc. complete all as specified and directed. Make: Honeywell, System Sensor, Agni

Material and labour for low smoke zero halogen (LS0H) flame retardant fire alarm cable 2 core, 1.5 mm², conforming to BS 7629-1, BS 6387 and BS EN 50200 and rated for 500 V, drawn through concealed PVC conduit and having plain annealed stranded copper conductor with primary insulation of glass mica fire resistant tape and secondary insulation of high performance silicone rubber, earth/drain wire of annealed tinned copper, electrostatic screen of aluminium fire barrier and type LTS3 outer sheath conforming to BS 7655, suitable for operating temperature range -30 ˚C to +70 ˚C and minimum bending radius being 6 times the overall cable diameter, RED in colour, including laying, termination and ferruling complete all as specified and directed. Make: RR Kabel, Polycab, Havells or equivalent

All as per item No. 92 above but for cable of 2 core, 2.5 mm² for supply to hooter / strobe complete all as specified and directed.

Material and labour for ASTM (UPVC) D 1785 / Sch 80 pipe of 32 mm nominal bore, conforming to IS 4985: 2000, with all fittings fixed to walls and ceilings or laid in floors complete as specified and directed. Notes:- [i] All hangers, clamps, brackets etc. shall be of galvanized iron. [ii] Welding of any kind on the galvanised support / hanger shall not be permitted. Make: Astral, Precision, Finolex or equivalent

All as per item No. 94 above but for pipe of 25 mm nominal bore complete all as specified and directed.telephone riser supporting 7 active firefighter telephones, 300 W total output at 70 V (RMS) complete all as specified and directed. Make: Notifier DS-DB + DS-AMPE or equivalent of JC, Esser

Material and labour for FM approved and UL listed, PN 1.6 rated lever operated, wafer type CI butterfly valve of nominal bore 100 mm, conforming to IS 13095: 1991,fitted with visual indicator and temper switch, having cast iron (CI) body with ductile iron EPDM coated disc, SS431 stub shaft, PTFE bushing, flange drilling standard end connection conforming to IS: 1538- 1993 along with necessary accessories for Zone control valve assembly complete as specified and directed. Make: Grinell-Tyco, Nibbco, BK valve, Kartar valves or equivalent

All as per item No. 96 above but for valve of 80 mm nominal bore complete all as specified and directed.

Material nd labor for FM approved and UL listed 25 mm NB compact 3 position ball valve with drain orifice (Test and Drain valve) to test and drain water flow through sprinkler systems having OFF-TEST-DRAIN position, integral sight glass, rated pressure 300 psi, orifice size 15 mm and K factor 5.6, conforming to NFPA 13, along with necessary accessories for Zone control valve assembly complete as specified and directed. Make: Tyco, HD, Viking

Material and labour for FM approved and UL listed 150 mm NB control valve (Alarm valve) of Cast iron (CI) body, Vertical or Horizontal mounting, shall meet the following technical/ operation requirements complete as specified and directed. Note: [i] Retarding device of approved design to obviate false alarms due to mains pressure variations where necessary or where indicated. [ii] Shall be complete with Water Motor Alarm Gong, all required auxiliary valves and drains and with pressure switch for wiring into the building fire alarm system [iii] Shall be iron body bronze trim for minimum 175psig(12bar) working pressure complete with electric pressure switches, test and alarm bell connections. Pressure gauges and all other ancillaries [iv] 15 mm test valve shall be installed on the installation side of each alarm valve [v] The orifice plate may form an integral part of the fitting but shall be manufactured from a non-ferrous material to prevent the hole from becoming blocked by corrosion or foreign matter. [vi] The pipe work and fittings used shall be MS. The pipe work shall be arranged to drain through a fitting having an orifice not exceeding 3 mm in diameter.

Material and labour for PN 1.6 rated cast iron (CI) sluice valve of 100 mm nominal bore, conforming to IS 14846: 2000 with cast iron body and bonnet, SS spindle and stem conforming to IS 6603: 2001, cast iron stuffing box, carbon steel stud/ bolt/ nut and washer, hand wheel operated and flange end connection conforming to IS 1538: 1993 with necessary accessories complete all as specified and directed.

Material and labour for PN 1.6 rated straight type 100 mm NB cast iron (CI) swing check type reflux (non return) valve, conforming to IS 5312-1: 2004 having CI body, bolted cover, integral / renewable seat, renewable disc, gunmetal trim with rubber seat ring with flange drilling standard end connection conforming to IS 1538: 1993 and necessary accessories complete all as specified and directed. Make: Leader, Sant, Venus,Tyco-Grinnell,Zoloto, RB or equivlant make mentioned in Appx

Supply and fix CL#150 rated two-piece design 25 mm NB cast iron (CI) straight pattern ball valve, conforming to IS 9890: 1981 and tested as per BS 6755-1, having cast iron body, stainless steel AISI 304 ball, renewable PTFE seat and gland packing, CS fastners and lever having screwed / socket weld end connection with accessories complete all as specified and directed. Make: Leader, Sant, Venus,Tyco-Grinnell,Zoloto, RB

Supply and fix orifice plate made out of 6 mm thick SS 304 with orifice of required size to be fitted between flange and landing valve of external and internal hydrants to reduce pressure at the outlet to the level of 3.5 kg/cm2 complete all as specified and directed. Make: Newage, AAAG, Minimax

Supply and fix 4 kg capacity dry chemical powder (ABC) type fire extinguisher (1 No. at entry/exit of each floor), conforming to IS 15683: 2006, with initial filling in brand new cylinder with powder coated finish, fitted in gunmetal union, high pressure CO2 gas cartridge, discharge hose, wall mounting bracket / floor trolley mounting accessories along with suitable signage, etc. complete all as specified and directed. Make: Kanex, Minimax, Aim-EX, Safeguard, coffco, Variex

Supply and fix 3 kg light-weight squeeze grip CO2 type fire extinguisher (2 Nos. at entry / exit of each floor & 1 No. in lift machine room), conforming to IS 15683: 2006, with CO2 gas filled in brand new seamless cylinder with powder coated finish, made out of Manganese steel with wheel type valve, discharge nozzle, bend & horn, wall mounting bracket / floor trolley mounting accessories along with suitable signage complete all as specified and directed by the engineer-in-charge. Make: Kanex, Minimax, Aim-EX, Safeguard, coffco, Variex

Supply and fix of 9 litre mechanical foam type fire extinguisher (in parking Area), conforming to IS 15683: 2006, with initial filling in brand new cylinder with powder coated finish, fitted with gunmetal union, high pressure CO2 gas cartridge, hose and ABS type branch pipe and wall mounting bracket / floor trolley mounting accessories along with suitable signage complete all as specified and directed. Make: Kanex, Minimax, Aim-EX, Safeguard, coffco, Variex

Supply and fix 9 kg capacity dry chemical powder (ABC) type fire extinguisher (1 No. at entry/exit of each floor), conforming to IS 15683: 2006, with initial filling in brand new cylinder with powder coated finish, fitted in gunmetal union, high pressure CO2 gas cartridge, discharge hose, wall mounting bracket / floor trolley mounting accessories along with suitable signage, etc. complete all as specified and directed. Make: Kanex, Minimax, Aim-EX, Safeguard, coffco, Variex

Supply and fix galvanized mild steel Fire bucket (filled with dry sand) conforming to IS 2546: 1974 round bottom type enamel painted, white inside and red outside and letters "FIRE" in black outside and handle with mounting bracket complete all as specified and directed. Make: Star safety solution, Mark safety appliances

Supply and fix following type of signages made out of 3 mm thick opaque PVC foam board with computer cut, PVC non-reflective self adhesive vinyl painted foam board, complete with mirror fasteners complete all as specified and directed. Make: Star safety solution, Mark safety appliances

(a) Sign of size 300 mm X 150 mm reading "EXIT" in 12.5 mm block letters in Green and white background, properly spaced to provide good legibility located directly in corridor near to each staircase and squarely attached to the wall or partition in a way that the top of the sign is not above 2 m from the finished floor level. Make: Variex, Mr safe, Matrix sign lab

(b) Sign of size 150 mm X 600 mm, posted and maintained within each stair enclosure on every floor, indicating the "Floor Number" in bold type and at 75 mm high numerals in red and white background, securely attached to the stair side of the door in a way that the bottom of the sign is not above 1.5 m from the finished floor level.

(c) Sign of size 450 MM X 150 MM reading "FIRE EXTINGUISHER" in 12.5 mm block letters in White and Red background, properly spaced to provide good legibility located directly in corridor near to each Manual call point/ Fire Extinguisher and squarely attached to the wall or partition in a way that the top of the sign is not above 2 m from the finished floor level.

(d) Sign of size 150 mm X 600 mm, posted and maintained at each lift landing and on the side of the stairway door from which egress is to be made on every floor, indicating the "STAIRCASE" by an alphabetical letter in bold type and at 75 mm high letters in red and white background, securely attached to the side of the stairway door from which egress is to be made in a way that the bottom of the sign is not above 1.5 m from the finished floor level

Material and labour for construction of brick masonry valve chamber of size 1000 mm X 800 mm X 1000 mm (internal dimensions) with PCC foundation 1:4:8 type D2 using 40 mm graded stone aggregate, 150 mm thick and 150 mm wide offsets around over 100 mm thick hardcore, 200 mm thick fly-ash brick masonry walls built in CM 1:6, 100 mm thick PCC 1:2:4 type B1 coping finished even and smooth, rendering 10 mm thick in cement mortar (1:6) finished even and smooth, without using extra cement internally including top of floor including excavation earth work in hard/ dense soil 6 mm thick MS sheet cover fixed on 25 mm X 25 mm X 6 mm thick angle iron frame with hold fasts embedded in PCC coping with locking arrangement, mild steel handle and painting to steel surfaces with two coats of synthetic enamel paint over one coat of primer including disposal of surplus soil to a distance not exceeding 50 m etc. complete as specified and directed.

LIGHTENING PROTECTION

Supply and fix epoxy earthing strip insulator, for electrical installation of size 25 mm X 3 mm with every one meter gap from above earth pit to roof of shed complete all as specified and directed.

Supply and fix In-Vessel organic composting machine (capacity- 150 kg) consisting of In-Vessel Reactor with geared motor, heating system, provision for aeration- blower, manual feeding door, sliding gate for outlet, temperature controller, control panel complete all as specified and directed.

NOTE : Amount of credit of Rs. 5170978.00 for retrieved materials is mentioned in schedule of credit on Srl Page No. 79 (R) of tender documents in pdf form which will be deducted offline while acceptance of tender.

Som Projects Pvt. Ltd.

SOOD ASSOCIATES PVT LTD

R AND B INFRA PROJECT LIMITED

RAMDEV CONSTRUCTION CO.

Varindera Constructions Limited

Hariom Projects Pvt Ltd

Aalaya Engineering Project Private Limited

SARAOGI BUILDERS LIMITED

Pooja Singla Builders And Engineers Pvt Ltd

GEMINI PROMOTERS AND BUILDERS PVT. LTD.