Repair of divisional office Under Irrigation division Laxmipur jamui.

B. O. Q. for Repair of divisional office Under Irrigation division Laxmipur jamui.

(i) Estimated Cost (in Rs.) RS 1399745.00

(ii) Amount of B.O.Q (inRs.) RS 1391245.00

(iii) Cost of B.O.Q(in Rs.) RS 2500.00

(iv) Earnest Money (in Rs.) RS 28000.00

ITEM NO. ITEM OF WORK UNIT QUANTITY RATE AMOUNT

DISMANTLING WORK

1 Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. m2 79.83 26.30 2099.53

2 Desmantiling doors windows and clerestory windows (steel or wood) shutters including chowkhats, architrage, holdfasts etc. complete and stacking within 50 metres lead:Of area 3 sqm and below. m2 1.28 191.1 244.60

3 Removing white-or colour wash by scrapping and .sand paperin and preparing the surface smooth including necessary repair scratches etc. complete Details of cost for 10 sqm m2 750.09 9.1 6825.79

FOUNDATION WORK

4 Earth work in excavation in foundation trenches or drains(not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m . including getting out the excavted soil and disposal of surplus excavated soil as directed, within a lead of 50 m. m3 2.26 472.50 1068.19

5 Supplying and Filling in plinth with local sand and under floors including, watering, ramming consolidating and dressing complete. m³ 9.03 293.40 2649.40

6 Providing designation 100 A one brick flat soling joints filled with local sand including cost of watering, taxes, royalty all complete as per building specification and direction of E/l. m² 101.73 303.40 30864.80

7 Providing and laying in position cement concrete of specified grade exluding the cost of centring and shuttering-all work upto plinth level.(1:2:4),. m³ 25.71 5565.80 143096.72

8 Providing and laying in position specified grade of reinforcement cement concrete excluding the cost of centring and shuttering ,finishing and reinforcement all work upto plinth level 1:1:5:3(1 cement:1.5 coarse sand:3 graded stone aggregate 20 mm nominal size). m3 1.29 6298.6 8125.19

9 Centring and shuttering including strutting,propping etc. and removal of form for.Suspended floors, roots, landings, balconies…………. m2 12.79 457 5842.75

10 Thermo-Mechanically Treated bars (Fe500 ) 10mm dia bcd kg 25.30 85.30 2157.75

11 Thermo-Mechanically Treated bars (Fe500 ) 8 mm dia . kg 20.18 87.6 1767.99

12 Brick work with bricks of class designation 100A in foundations and plinth in : Cement mortar 1 .:4 (1 cement: 4 coarse sand ). m³ 3.8 5583.40 21105.25

13 Providing corrugated G.S. sheet rooing fixed with G.I. J hooks, bolts and nuts 8 mm diameter with bitumen and G. I. limpet washers or with G.I. limpet washers filled with white lead and including a coat of approved steel primer and two coats of approved paint on over lapping of sheets complete (upto a pitch of 60°) excluding the cost or purlins, rafters and trusses. m2 70.2 1675.9 117648.18

14 Steel work in built up tubular trusses including cutting, hoisting, fixing in position and applying a priming coar of approved steel primer, welded and bolted including special shaped washers etc. complete:. kg 432.225 119.5 51650.89

15 12 mm cement plaster of mix 1:4(1 cement :4 coarse sand). m² 397.72 189.20 75248.02

16 net cement punning . m2 4.26 49.20 209.59

FITTING WORK DOOR & WINDOW

17 Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately).Sal wood. m3 0.03 51946.20 1768.77

18 Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows, including ISI marked M.S.pressed butt hinges bright finished of required size with necessery screws, excluding panelling which will be paid for separately, all complete as per direction of Engineerin-charge.30 mm thick . m² 3.87 1790.30 6928.46

19 Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of shutters (overall area of door shutter to be measured). m² 0.14 362.60 50.76

20 Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete :250x16 mm. each 4.00 165.90 663.60

21 Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete250x10 mm. each 11.00 62.90 691.90

22 Providing and fixing ISI marked oxidised M.S. handles conforming to IS :4992 with necessary screws etc. complete:125 mm. each 10.00 29.41 294.10

23 Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm daimeter bolts ,nuts and wooden plugs and embedding in cement concrete block 30x10x15 cm 1:3:6 mix (1 cement:3 coarse sand :6 graded stone aggregate 20 mm nominal size ). each 4.00 148.90 595.60

24 Providing and fixing ISI marked ,IS:1341, MS heavy weight butt hings with necessary screws etc. complete.

25 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.Fixed to openings/ wooden frames with rawl plugs screws etc. kg 19.27 140.00 2697.80

26 Providing and fixing factory made P.V.C. door frame of size 50x47 mm with a wall thickness of 5 mm,made out of extruded 5 mm rigid PVC foam sheet, mitred at corners and joined with 2 Nos. of 150 mm long brackets of 15x15 mm M.S. square tube, the vertical door frame profiles to be reinforced with 19x19 mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100 mm size, complete as per manufacturer’s specification and direction of Engineer-in-Charge. m 4.87 461.20 2246.04

27 Providing and fixing factory made panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19 mm x 19 mm for styles and 15x15 mm for top & bottom rails. M.S.frame shall have a coat of steel primers of approved make and manufacture . M.S. frame covered with 5 mm thick heat moulded PVC ‘C’ channel of size 30 mm thickness, 70 mm width out of which 50 mm shall be flat and 20 mm shall be tapered in 45 degree angle on both side forming styles and 5 mm thick,95 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered in 45 degree on the inner side to form top and bottom rail and 115 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided both side of the panel. 10 mm (5 mm x 2 ) thick, 20 mm wide cross PVC sheet be provided as gap insert for top rail & bottom rail. paneling of 5 mm thick both side PVC sheet to be fitted in the M.S. frame welded/sealed to the styles & rails with 7 mm (5 mm+2 mm) thick x 15 mm wide PVC sheet beading on inner side, and joined together with solvent cement adhesive. An additional 5 mm thick PVC strip of 20 mm width is to be stuck on the interior side of the ‘C’ Channel using PVC solvent adhesive etc. complete as per direction of Engineer-in-charge, manufacturer’s specification & drawing.(9.120) m2 2.10 2051.90 4306.53

28 Providing and fixing 1 mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3mm MS gusset plates at the junction and corners.all necessary fittings complete.including applying a priming coat of approved steel primer. Using M.S. angle 40x40x6 mm for diagonal braces . m2 2.10 3453.4 7252.14

29 Providing and laying vitrifed floor tiles in different sizes {thicknessto be specified by the manufactruer) with water absorption's less than 0.08 % and conforming to IS : 15622 of approved make in all colours and shades, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand ) including grouting the joint with white cement and matching pigments etc., complete. Size of Tile 60x60 cm m2 149.24 1781.10 265815.99

30 Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS : 15622 (Thickness to be specified by the manufacture) of approved make in all colours, shades except burgundy , bottle green , black of any size as approved by Engineer-in-charge in skirting , risers of steps and dados over 12 mm thick bed of cement Motar 1:3(1 cement: 3 coarse sand ) and jointing with grey cement slurry @ 3.3 kg per sqm including pointing in white cement mixed with pigment of matching shade complete. m² 41.76 832.00 34736.00

31 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. m² 1014.68 111.00 112629.78

32 Applying one coat of cement primer of approved brand and manufacture on wall surface:Distemper primer . m² 1014.68 45.00 45660.72

33 Finishing walls with water proofing cement paint of approved brand and manufacture and of required shade to give an even shade New work (three or more coats) m² 1014.68 91.00 92336.13

34 Painting with ready mixed paint of approved brand and manufacture in all shades to give an even shade , (two or more coats). m² 62.68 89.10 5584.79

SANITARY FITTING ITEMS

35 Providing and fixing on wall face unplastidsed-PVC(working pressure 4 kgf per sqm) rain water pipes conforming to IS :4985 including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion. 75 mm diameter. m 6.00 157.10 942.60

36 Carriage of construction materials from source to work site

A Coarse Sand Cum 19.75 625.95 12362.51

B Stone Chips Cum 24.34 2974.86 72393.21

C Cement+steel MT 11.57 455.5 5270.59

E Local Sand Cum 10.56 238.10 2514.33

SUB TOTAL A 1159516.88

ADD LABOUR CESS @ 1% OF WORK 11595.17

Add S. Fee 7909.00

SUB TOTAL B 1179021.05

Grand Total 1391244.84

IRRIGATION SUB DIV-03 IRRIGATION SUB DIV-03 IRRIGATION DIVISION

LAXMIPUR LAXMIPUR LAXMIPUR

Name of Work Repair of divisional office Under Irrigation division Laxmipur jamui Cost of Work as per BOQ ₹1391245.00 Time of Completion 2 Month

Sl No. Items Requirement

Name of the contractor

Address of the contractor

1 Earnest Money As per NIT duly pledged in favour of Executive Engineer, Irrigation Division, Laxmipur, Jamui (Pay either online or Physical mode only)

Bid Security Amount - ₹28000.00 Bid Security Amount (in ₹)

2 Time of Completion

3 Registration No.

4 CHARACTER CERTIFICATE

5 Affidavit in required format (Should be after the publication date of the tender) as per letter no. 686 dated 19.08.2014)