SPECIAL REPAIRS TO TOILET OF ODTD, EXISTING CULVERTS NEAR JCO MESS, CONSTRUCTION OF OVER HEAD PROTECTION AND PCC ROAD AND CERTAIN REVENUE WORKS UNDER GE DEHU ROAD

Amount

Demolition of stone boulder masonery built in cement mortar in any position

Demolition of cement concrete in ground floors and pavings exceeding 15cm thickness below or above ground leve

Dismentling wall & floor tiles, incl cement mortar bedding (but not backing)

Dismentling plain or corrugated steel sheeting, any gauge, thickness, including nainital or simlar pattern roof covering.

Taking down steel tubing galvanised with connections of dia 15 mm.

-do- all as per item no 5 but 20mm.

Taking down chowkats or frame with shutter (w/o taking off shutter from the frame) of area not exc 1.5 Sq.m

-do- all as per item No. 7 above area exc 1.5 sqm but not exc 4.0 sqm

M&L for glazed coloured ceramic tiles 300mm & 450mm x6 to 7 mm thick as in vertical surfaces set & jointed in neat cement slurry & pointed in coloured cement incl backing coat 10mm thick in CM 1:4 finished even and fair to receive tiles all as direced.

M & L non skid coloured ceremic tles 7 to 8 mm thick area of each tiles exceeding 0.18 sq.m but not exc. 38 sq.m , in floors, etc.set and jointed in cement slurry and pointed in white or coloured cement to match. Including 15mm thick screed bed or bedding layer in cement mortar 1:6 complete.

M & L for polished 20-25 mm thick machine cut cudappa stone slab set jointed with grey cement & pointed with pigment with pigment to match the shade of slab including rubbing & polishing at any position,Including 15mm thick screed bed or bedding layer in cement mortar 1:6 complete.

M & L 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including rounding edges of sides, pointing in white cement (1:2) using marble dust with admixture of pigment to match the sahde of granite complete.

Rough excavation n.exc 1.5 m deep and and getting out in hard/dense soil.

Surface excavation not exceeding 30 cm deep and averaging 24 cm deep and getting out in hard /dense soil complete all as specified and directed.

Excavation over areas n.exc. 1.5 m deep and getting out in hard/dense soil complete all as specified and directed.

Excavation in trenches, not exceeding 1.5 mtr wide and not exceeding 1.5 m depth for foundation etc and getting out in hard/dense soil.

M & L for excavating in post holes in hard/dense soil (or similar holes) each n exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm,

Removing excavated material (soil) n.exc. 50 m and depositing where directed at a level n.exc. 1.5 m above the starting point complete all as specified and directed.

Removing surplus excavated material (SOIL) to distance exc. 250 m but not exc 500 m and depositing where directed at a level not exc. 1.50 m above the starting point complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc. 25 cm thick in each layer as in soil complete all as specified and directed.

M & L for Cement concrete in post holes filling type C-2 1:3:6 (40 mm graded aggregate) complete all as specifid and directed.

M & L for plain cement concrete type D2 1:4:8 (using 40 mm graded aggregate stone) in foundations, filling and mass concrete.

M&L for PCC solid block masonry of PCC (1:3:6) Type C-1 exc 10 cm width & set in CM (1:6) complete all as specified and directed.

M & L for Moorum/red bajri filling in floors or paving laid in layers n.exc. 15 cm thick spread levelled and rammed including watering complete all as specified and directed.

M & L 150 mm thk Hard core of broken stone or boulders, gauge n.exc. 63 mm deposited, spread and levelled in layers , watered and rammed to a true surface complete all as specified and directed.

M & L for providing 75 mm thick cement concrete 1:3:6 type C-2 (using 40 mm grade stone aggregate) as in sub floor, sub base of floor finished even and rough complete all as specified and directed.

M & L for 100 mm thick PCC 1:4:8 type D2 (using 40 mm graded stone aggregate) in sub base for hard standing complete all as specified and directed.

M & L for providing 100 mm thick cement concrete 1:2:4 type B-1 (using 20 mm grade stone aggregate) as floor finished even and rough complete all as specified and directed.

M&L for PCC 1:4:8 type D2 (40mm graded aggregate) in sub base of floor/pavement, 75 mm thick all as specified and directed.

M & L for providing reinforced cement concrete 1:1.5:3 (Nominal Mix) type A-1, using 20 mm graded stone aggregate,as in walls, retaining walls, basement walls, ballast walls and the like complete all as specified and directed.

M & L for providing reinforced cement concrete 1:1.5:3 (Nominal Mix) type A-1, using 20 mm graded stone aggregate,as in beams, cantilevers, bressummers, lintels over 1.50 m span and the like complete all as specified and directed.

M & L for TMT bars 10 mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

Ditto as per item No 33 above but 5 mm dia and over upto and including 10 mm dia in stirrups, spacers and binders

M & L for use and waste of form work to faces of walls, retaining walls walls, abutments, and similar work complete all as specified and directed.

M & L for use & waste of formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs etc. also splayes between floors and beams in rough finished surface of concrete complete all as specified and directed.

Taking down cement plaster in any description including racking out joints, hacking for key and scrubbing down with water etc., and M & L for 15 mm thick plastering in cement mortar 1:4 on external plaster finished the surfaces even and fair ( upto any height) complete all as specified and directed.

Taking down cement plaster in any description including racking out joints, hacking for key and scrubbing down with water etc., and M & L for 5 mm thick plastering in cement mortar 1:3 on ceiling complete all as specified and directed.

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water etc any type on any surfaces

Rolling and consolidating formation surfaces with power roller exc. 8 tonne but n. exc. 12 tonne including watering, consolidating to the required level, gradient, camber etc. in cutting, filling in hollows and depressions in the process complete all as specified and as directed.

M & L for cement concrete work in pavement/hard-standing of flexural strength 40 kg/per square centimetre in field using 400 kg of cement per cubic metre, thickness of concrete 25 cm or less completed all as specified

Finishing surface of concrete roads, pavements etc by brooming complete all as specified and directed.

M & L for forming 12 mm thick expansion joints 150 mm deep, filled with preformed bituminous filler and top 30 mm primed and sealed with sealing compound grade 'A' complete all as specified and directed.

M & L for forming construction joint 30mm deep x 10mm wide filled with sealing compound grade 'A' complete all as specified and directed.

M & L for forming contraction (Dummy) joints 65 mm deep x 10 mm wide, filled with sealing compound grade 'A' complete all as specified and directed.

S & F of mild steel work in hand rail, half round or other stock section or core for fixing of wooden hand rails, bluster, running bars, nosing of steps, wind ties, post and struts for fencing, flat iron fillets and the like including necessary cutting, drilling holes, notching etc. as required conforming to Fe-290 Grade E-165 complete all as specified and directed.

Rolled mild steel plates (plain or chequered) channels square cut or notched (ordinary and counter sunk) forming holes with out any attachment Fe 410 W Gde E 250 quality A.

M&L for pre painted galvalume aluminium zink coating GI based corrugated steel sheet 0.50 mm thick of any color having tensile strength of 550 Mpa as in roof covering /cladding to walls fixed with self tapping screws as specified.

M&L for preparation of new steel surfaces of any description, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide.

M&L for sand filling under floors or in foundations including watering and consolidation.

M & L for Machine pressed glossy finish,precast interlocking paver block with grey cement and pigment, rubber moulded factory made any shape and size confirming to IS 15658-2006 of 80 mm thickness M-40Grade over including 25mm thick curshed stone dust cushiong all as specified and directed.

Providing cement concrete 1:3:6 type C1 (20 mm graded aggregate) in coping filleting etc all as specified and directed.

M&L for PCC 1:2:4 type B-1 (20 mm graded stone aggregate copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating.

M&L for rendering 10mm thick in CM 1:4 on block wall complete all as specified and as directed by the Engr-in-charge.

M&L for rendering 15mm thick in CM 1:4 on external plaster finished the surfaces even & fair (upto any height) complete all as specified and directed.

M&L for rendring 10mm thick in CM 1:6 on fair faces of brick/ concrete surface is to be finished even and smooth (without using extra cement ) with thin layer of sagol

M&L for remdering 15mm thick in two layers (10+5mm) cement plaster on concrete/ brick surfaces in CM 1:4 and finished top surfaces even and smooth with using extra cement with water proofing compound

M & L for preparation of newly plastered surfaces of walls and applying two coats of cement pase paint over a coat of alkali resistant primer complete all as specified and directed.

M & L for preparation of newly plastered surfaces of ceiling and applying two coats of cement pase paint over a coat of alkali resistant primer complete all as specified and directed.

M/L for two coat of OBD over a coat of chalk whiting on new surfaces of wall including ncessary preparation of new surfaces etc

M/L for one coat of white washing on old wall surfacces with necessary preparation of surfaces etc on ceiling

S & F 15 mm dia GI pipes medium grade with all fitting & fixed to wall / floor

-ditto- all as per item No. 62 above but fixing only.

-ditto- all as per item No. 62 above but 20mm

-ditto- all as per item No. 62 above but fixing only.

S&F in repairs vitreous china squatting pan "Orissa pattern" size 580x 440mm white wash integral foot rest with provn of fime concrete bedding & jointing to flush pipe & socket of WC including 'P' or 'S' trap

S&F in repairs viterous china white wash basin flat back or size 550 x 400mm and incl brackets , wast coupling of PTMT (half or full threaded) 32mm dia and PVC connection 15mm dia x 450mm long with PVC down take pipe

S&F in repairs vitreous China urinals half stall urinal (back or corner wall type), complete inlcuding providing and fixing plugs, bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement including urinal spreader of PTMT any colour for fixing with 15mm dia pipe, PVC connection 15mm x 600mm long, waste coupling of PTMT (Half or full threaded) 40mm dia

S&F in repairs 15mm dia pillar taps cast copper alloy with capston head chromium plated screwed down high pressure wlth or without letter "Hot" or "cold" with long screwed shanks and flynuts

S & F in repairs 15 mm dia bib taps chromium plated fancy type , screwed down for iron pipes or for brass ferrule.

S & F in repairs 15 mm dia stop valves fancy type , chromium plated with long shank and cup (concealed type) ,screwed high pressure with crutch or butterfly handles screwed both ends for iron pipe. Etc.

S& F in repairs PVC flushing cistern white colour 10 ltr capacity with inlet, ball valve, lever & bracktes etc.

S&F in repair cabinate mirror cupboard pattern of size 450x350mm regular size with mirror and PVC shelves complete all as specified and directed by Engr-in-Charge

S & F in repairs chromium plasted brass tubular towel rail, 20 mm D type 60 cm long between flanges.

S & F in repairs 75 mm dia outlet long arm cast iron nahani trap with grating incl jointing to waste pipe fixed in cement concrete etc.

Taking down PVC (SWR) pipe 75/110mm dia including fitting

S & F of 110 mm bore PVC (SWR) pipe single socketed, in short length with rubber ring joint laid in trenches or in floors complete all as specified and directed.

-ditto- all as per item No.77 above but 75 mm dia

S&F PVC (SWR) bend 110mm dia with acess door

S&F PVC (SWR) bends 75mm dia with access door

S&F PVC (SWR) vent cowl 110mm dia

S & F solid PVC door frame of size 50mm x 47mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube.

S/F factory made solid PVC moulded door shutter thick (style) consisting of frame made out of MS ltubes for top and bottom rails, MS frame shall be covered with heat moulded plain coloured PVC 'C' chanel having a PVC sheet strips PVC sheets for top rail, lock rail & bottom rail on either side and as gap insert for top rail and bottom rail. Panelling and plain colour PVC sheet to be fitted in the MS frame welded/ sealed to the stiles and rails with suitable PVC sheet beading and jointed together with solvent cement, suppling and fixing in the frame at site as per specification and drawing

M&L for pressed steel frames for doors with one or more rebates incl necessary fixing lugs hinges lock strike plates exc size or grame 105 x 60mm

M&L for cement concrete 1:3:6 type C0 (using 12.5mm graded stone agg) as in door frame filling

S&F 30 mm thick flush shutter solid core construction with block board corre & plywood face pannels commercial type on both sides with 30mm thick

M&L for painting to wooden surfaces with two coats of synthetic enamel paints wlith pink primer and preparation of surfaces etc complete

S&F Aluminium alloy anodised sliding door bolt with hasp staple (bolt type) hand fixing clips of sheet cast or extruted section & fixing bolts & sliding blots of extruted sections of cast aluminium alloy & fixed 300mm long

S/F 200mm length Aluminium anodised barrel tower bolt

S & F aluminium anodised, barrel tower bolts of extruded section and fixed, length of bolt 75 mm all as specified and directed

S/F Aluminium handles fabricated type anodised 150mm

M&L bands, straps, supports or stays, for rainwatr ventilating pipes, including bolts, if required hooks (stay) heavy for large gates, hook and pintle hinges large haps and staples; chains; hand made sliding bolts; clamps ; hold fasts; wall ties; hooks for hanging fans' plain angle cleats for securing purlins to wood trusses or raftrs; knee piece inserts; two way and three way straps, plate washers and similar small article confiring to Fe-290 Gde E-165

S&F anodised aluminium frame powder (minimun thickness of powder coating 50 micron) coated for doors, window, ventilators powder coated with one or more rebates including joining cleat for fixing etc, complete all as specified

S&F anodised powder (minimun thickness of powder coating 50 micron) coated aluminium window and ventilator shutter, fixed type without sash bar, aluminium section weighting 0.55 kg/m including necessary joining cleats, glazing clips, ruber neorene packing, handle 2 Nos in each door, hinges, anodised aluminium snap beading screws etc, complete all as specified.

S & F 4.8 mm thick sheet glass ordinery quality nexc 0.50 sqm in each pane

Dismanling water tanks exc 250 & n exc 500mm

M&L rotational moulded polythelene water store tank, cylindrical vertical with closed top hoisted and fixed in position all as specified capacity of tank 500 ltrs

S&F ball brass valves, high pressure, with polythene float and flynut complete screwed for 20mm bor iron pipe or brass ferrule and fixed

M&L for cement concrete 1:3:6 type C2 (using 40mm graded stone agg) as in plinth protection 75mm thick finished top surface even and fair

M & L for 2nd class hard wood plain, solid, straight chowkhats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed.

S & F pre-laminated particle board 25mm thick exterior grade prelaminated one side with deocrative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete.

S & F Stainless Steel wire cloth ,0.36 mm nominal dia of wire and avg width of aperture 1.40 mm and fixed with tinned tacks or galv. Wire stapples.

S& F Continuous (piano) 40 mm width hinges,mild steel, bright finish or electrogalvanised all as specified and directed

S & F of 75 mm size brass hasp and staple safety type, with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed.

S&F mild steel drawer pulls, 4 screw plate with fixed dished pull; 80 mm to 100 long.

Taking out existing water proofing treatment including cement plaster(any no of layers) on roof surfaces, cleaning the surfaces and removing the debris outside MOD land complete all as specified and as directed.

M&L for rendering 10mm thick in CM 1:4 on concrete surfaces / slabs with admixture of integral water proofing compound as per manufacture instruction by weight of cement for filling depressions if any to receive water proofing treatment (WPC shall be measured & paid seperately) complete all as specified and as directed.

Supply only Liquid water proofing compound .

M&L for water proofing treatment using polymerised membrane to roof slab. Water proofing treatment shall be as under:- (a) Applying cold bitumenous oil based primer IS No 3383 @ 250 Gms/Sqm and laying APP Modified membrane with non woven polymer reinforcement / mat core (Centre core) not less than 3 mm thick and not less than 3.50 kg/sqm the overlap shall be 100 mm on length side and 100 mm on width side and all as per manufacturer instruction complete.The roof surface shall be thoroughly wire brushed, washed, dried up & cleaned to remove all foreign materials & dust to receive primer.Top surface shall be applied with 0.15 Kg/Sqm bitumenous aluminium paint complete all as specified and as directed.

E/M Portion

Taking down carefully copper/aluminium point wiring (light/exhaust fan) complete fittings such as switches, ceiling roses,pendants etc. removing materials to store for keeping in safe custody for reuse at site and making good disturbed surfaces of walls, floors, etc.

Taking down unserviceable main switches ,DBs alongwith teak wood boards etc and making good disturbed surfaces of walls/ floors to match the existing surfaces all as specified

M&L for point wiring complete including single core PVC insulated and unsheathed type flexible bright unsheathed multi stranded 1.5 sqmm copper conductor FRLS in and including PVC casing caping and surface/concealed PVC Conduit & accessories having ISI mark to be fixed with proper screws including all accessories/ fittings/ junction boxes /inspection covers etc including hard PVC board of required size fixed with wall surface including 1.5 sqmm 1100 V grade PVC insulated, unsheathed flexible muliti stranded copper conductor FRLS cable as continuous earthwire connected to metallic bodies of luminaries/fans etc. at one end and to common earth duly at other end for.

One light point controlled by one one way switch

One exhaust fan point controlled by one one way switch

S&F submain wiring with 2 single core PVC insulated multistranded flexible copper conductor 1100 Volts grade cables 4 Sqmm and 1 run 2.5 Sq mm Earth Wire PVC insulated multistrand cupper conductor cable (FRLS) drawn through PVC casing caping of suitable size and with all accessories all as directed and specified by Engr-In-charge.

S & F Switch piano flush type single pole one way 230V 6Amps

S & F ceiling rose surface three terminals ,230 Volts

S & F in repair Lamp holder ( angular type) , PVC/Polycarbonate type batten fittings insulated body with back plate Make :- Anchor or equivalent

S & F in repair LED lamp pin type 10 watt LED ADORE 10W E27 CDL 3 STAR LAMP Make : Bajaj /Philips / Crompton.

Supply & fix LED Neo Decorative ultra slim square profile LED 20 W lighting fixture with extruded polycarbonate, environmental friendly and all as directed and specified by Engr-In-charge.Make :- Havells Cat Part No LHEXBLP7PN1W020 and Eqavalant of HPL,Bajaj,Lukar, Crompton and Philips.

Supply & fix exhaust fans 300 mm sweep 1400 RPM, 220 volt including making connection using 3 core flexible cable and making hole in wall of proper size including making good surface of wall and all as directed. Make : Havells, Surya, and Orient.

M & L in repair MCB DB SPN sheet metal single door enclosure mounted on teak wood board of suitable size for mounting MCB 230 Volts , 4 way

S & F MCB SPN 10-40 amps, 240Volts 10KA

S & F MCB SP 10-40 amps, 240Volts 10KA

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10 sq mm 2 core.

M&l for HDPE pipe 50 mm dia for UG Cable protection through out from panel to all as specified and directed by Engr-in-charge.

Excavation in trenches in any type of soil n exc 1.5 mtr in width and n. exc 1.5 mtr in depth and getting out all as required for laying of cables,foundation of poles or stays etc:- Soft/loose soil

Removing excavated soils n exc. 50m and depositing where directed at a level n exc. 1.5m above the starting point complete all as specified and as directed by the Engineer-in-Charge.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in soft/loose soil, complete all as specified

M & L for earthing complete with galvanised steel earth plate electrode 60cm ×60cm.× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel,earth wire protected by GI pipe 15 mm dia 'light grade' including charcoal dust, common salt, excavation & earth work, PCC Pit with 1:3:6 type C-1, 40 mm thick RCC cover in 1:2:4 type B-1 reinforced with 8 mm dia TMT bars @ 75 mm c/c both ways with MS handles 12 mm dia, PGI funnel & GI watering pipe 'light grade' 20 mm bore all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion

H S TAKHI

D J Construction

RAMESH PATIL

Dinesh Constructions