Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹9.5 LAccepted-AOC WZ143 A 7 A S 4 43 GALI NO 2 OLD MAHABIR NAGAR NEW DELHI 110018 | NEW DELHI | NEW DELHI | DELHI | 110018 | L1 | Accepted-AOC DUE TO L1 | |
| 2 | L2₹11.0 L+₹1.1 L (11.5%)Rejected-AOC A SECTOR BHAGWATI BHAVAN VIJAY NAGAR LAL GHATI BHOPAL M P 462030 | BHOPAL | BHOPAL | MADHYA PRADESH | 462030 | L2 | Rejected-AOC HIGHER RATE | |
| 3 | L3₹15.4 L+₹5.6 L (56.4%)Rejected-AOC 112 AMBALA ROAD NARAINGARH AMBALA 134203 | NARAINGARH | AMBALA | HARYANA | 134203 | L3 | Rejected-AOC HIGHER RATE |
Tender Value
₹19.0 L
EMD Value
₹37,980
Closing Date
27 Jul 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE NEW DELHI
GE NEW DELHI, SP MARG NAR ABHM GATE NO 5
REPAIR/MAINT OF SEWAR LINE, MANHOLES, CLEANNG OF SEWAR APPURTENCE AND SEWAGE LINES AND WELCOME MAINT INCL CERTAIN E/M CONNECTED WORKS IN MD OFFRS ENCLAVE AT SP MARG UNDER GE NEW DELHI
2023_MES_607315_1
NIT No GE/ND-40/2023-24
Open Tender
Miscellaneous Works
Item Rate
270 days
GE NEW DELHI
Please refer Tender documents.
7 documents required · 7 mandatory
₹500
Yes
GE NEW DELHI
₹37,980
Yes
15 Jan 2024
30 Jun 2023
29 Jul 2023
30 Jun 2023
27 Jul 2023
14 Jul 2023
Amount
Excavating in trenches in any type of soil, not exceeding 1.5m wide and not exceeding 1.5 m in depth for foundation for manholes / shafts or sewer line etc and getting out all as specified.
Excavating in trenches in any type of soil, not exceeding 1.5m wide, exceeding 1.5m in depth but not exceeding 3.0 m in depth for foundation for manholes / shafts or sewer line etc and getting out all as specified.
Demolition and breaking up drain pipes (salt glazed ware, AC or reinforced concrete) set in cement mortar, bore of pipe 150mm.
Demolition and breaking up drain pipes (salt glazed ware, AC or reinforced concrete) set in cement mortar, bore of pipe 200mm.
M & L Salt glazed stone ware ( SGSW ) drain pipes, Grade ‘A’ 150 mm bore, laying level or to falls in trenches, on concrete bed or directly on hard grounds and making joints and testing complete.
M & L Salt glazed stone ware ( SGSW ) drain pipes, Grade ‘A’ 200 mm bore, laying level or to falls in trenches, on concrete bed or directly on hard grounds and making joints and testing complete.
M & L Cement concrete 1:3:6 type C-2 (using 40mm graded crushed stone aggregrate) in concrete bed to drain pipes including packing under and haunching against the sides of pipe of 150 mm bore after they are laid and tested.
M & L Cement concrete 1:3:6 type C-2 (using 40mm graded crushed stone aggregrate) in concrete bed to drain pipes including packing under and haunching against the sides of pipe of 200 mm bore after they are laid and tested.
Returning filling in including spreading levelling, watering and well ramming soil in layers n. exc. 25 cm thick complete all as specified.
Removing excavated materials/surplus soil out side of defence land up to a total distance of 1.5 Km complete all as directed by Engineer-in-charge.
Demolition of brickwork stone/boulder masonry built in cement mortar including all quoins, pillars etc by breaking up or down, separation of serviceable material from the unserviceable,incl removing the demolished material outside the MOD land.
M & L for brick work with sub class B bricks straight or curved on plan exc. 6 meter mean radius built in cement mortar 1:6 all as specified and directed.
M & L for PCC (1:2:4) type B-1 (using 20mm graded crushed stone aggragated) as in benchning, copings, channels, slightly chamfered or rounded on edge including necessary use of form work complete all as specified & directed at site.
M&L for 15mm thick reeady mix plaster READIPLAST RP of (Make Ultra tech) on any surfaces of brick/concrete includidng aapplication of bonding coat as Ultratech seal and Dry 5 Plus per manufacturers instruction including finished even and smooth complete all as specified and directed.
Taking down cement plaster on brock wall any description incl raking out joint, hacking for key, scrubbing down with water complete.
M&L cleaning, flushing of chocked and de-silting of outdoor sewage lines n.exc 300mm internal diameter of any depth upto three meter . The cleaning shall be carried out with mechanized operation by means of diesel/electric operated vehicle mounted hydraulic operated high pressure suction cum jetting machines fitted with pump of requisite capacity and the sludge sucked out with super succer machine of required capacity and sent to storage tanks for further disposal to the authorised disposal sites. The sludge deposited in the sewage line shall be fully cleaned and disposed off the same outside the MoD land at any distance and without any additional cost on the same day when it was taken out. The job shall be carried out with safety precaution equipments and with strict supervision complete all as directed. Note:- (a) The service provider/contractor during the mechanized operation shall be equiped with gas monitor, nylon rope ladder, torch light and compressor blower etc alonwith the sewage cleaning truck mounted suction/jetting machine. (b) Manual cleaning operation/scavenging is prohibited. (c) The unit rate quoted by the contractor shall interalia deem to include the cost of proviiding skilled driver and operator and supervising Engineer including provision of water for jetting and removal of sludge/silt/liquid/mud and sand (in foul position) etc (d) The effective length of pipe for the purpose of payment shall be excluding the length of manhole.
Desluding of existing chocked manholes of depth upto 2.5 m for liquid,solids and slurry material by machanical means using hydraulic operated high pressure suction cum jetting sewer cleaning machine having jetting tank capacity of minimum 5000 Ltr and suction tank capacity of 300 Ltrs and 260 LPM with minimum 145 bar suction flow of 10200 LPM including skilled driver and operator and supervising Engineer including provision of water for jetting and removal of sludge/silt/liquid/mud and sand (in foul position) etc outside the MOD land/premises at any distance all as directed by Engr-in-Charge including loading, unloading, digging out pit of any size in any type of soil, surring sludge/silt/spoil/mud etc into the pit and spraying bleaching powder over the entire surface complete including taking of the manhole cover for the entire process as above and replacing the manhole cover in its position. Note :- (a) The service provider/contractor during the mechanized operation shall be equiped with gas monitor, nylon rope ladder, torch light and compressor blower etc alonwith the sewage cleaning truck mounted suction/jetting machine. (b) The cleaning shall be carried out with mechanized operation by means of jetting machines and the sludge sucked out with super succer machine of required capacity and sent to storage tanks for further disposal to the authorised disposal sites. (c) Manual cleaning operation/scavenging is prohibited. (d) The unit rate shall deem to include for all material, labour (skilled/unskilled), tools and plants and requisite quantity of water for the entire operation and transportation arrangements. (e) The sludge so removed shall include the cost of dewatering also.
Demolition of RCC manhole cover slabs and similar suspended work incl(reinforcement cut as required to facilitate demolition)
MS framed brackets of angle iron or of flat iron with hold fasts etc as directed incl necessary welding etc complete for manholes and covers confirming to Fe-410-0 or Fe-310-0.
S&F precast polycrete plastic fibre reinforced concrete(PFRC) rectangular manhole cover (medium duty) with 60 to 75 mm thick, confirming to IS: 12592 and IS:1726, factory made area exc 0.50 sqm but n exc 0.75 sqm on any side complete all as specified and directed by Engr-in-charge.
S&F precast polycrete plastic fibre reinforced concrete(PFRC) circular/rectangular/square cover for gully traps (light duty) with frame of size 450 to 550mm, 40 to 50 mm thick conforming to IS: 12592 and IS:1726, factory made complete all as specified and directed by Engr-in-charge.
Cast iron floor trap of size 75mm, with grating including jointing to waste pipe fixed in cement concrete type B-1(1:2:4:), fixed in repair.
S&Fin reparis Salt glazed stoneware gully trap, rectangular mouthed, 180x150mm, type 'P' including necessar excavation and earth work in any kind of soil, set in Plain Cement Concrete 1:2:4 , type B-1 (using 20mm graded crushed stone aggregrate), cast iron grating and setting and jointing to drain with cement mortar 1:1
Dismantling of cast iron or reinforced concrete drain pipe 100&75mm bore,jointed in cement mottor and taking out of treanches if required
S&F Cast iron soil,waste and vent sand cast pipes pipes in any length with or without ears,with cement joints,laid in trenches or in floors of size 100 mm bore
S&F Cast iron soil,waste and vent sand cast pipes pipes in any length with or without ears,with cement joints,laid in trenches or in floors of size 75 mm bore
S&F Cast iron soil,waste and vent sand cast pipes pipes in any length with or without ears,with cement joints, fixed to wall, of size 100 mm bore
S&F Cast iron soil,waste and vent sand cast pipes pipes in any length with or without ears,with cement joints, fixed to wall, of size 75 mm bore
S&F Cast iron bends (any radius) with ducks foot or heel rest.of size 100mm bore of pipe.
S&F Cast iron bends (any radius) with ducks foot or heel rest.of size 75mm bore of pipe.
S&F PFRC circular manhole (medium duty) cover with frame of size 551 to 650 mm dia conforming to IS: 12592 and IS:1726, factory made complete all as directed and as approved by Engr-in-Charge
S&F cast iron branch piece, single ( equal or unequal) ordinary or inverted ( spigot or socket type) or with parallel branches, tee and similar items of 100 mm internal dia complete all as specified and directed.
S&F cast iron bends ( any radius) diminishing pieces or tapers ( larger bore measured) of 100 mm internal dia complete all as specified and directed.
Demolition of cement concrete (unreinforced) of any description as in ground floor / paving not exc 15 cm thick above or below ground level and removing rubbish off the premisses .
M&L cement concrete type C-2, 1:3:6 ( 20mm graded stone aggregate ) , 75 mm thick as in plinth protection , finished cement concrete surface even & smooth without using extra cement complete all as specified and directed .
S&F stack clamps size 50mm x 5mm, flat iron and 16mm dia round iron stays, including bolt and nut and securing ends of stay to wall or roof 75mm bore pipe complete all as specified and directed.( Fixed in repair)
S&F stack clamps size 50mm x 5mm, flat iron and 16mm dia round iron stays, including bolt and nut and securing ends of stay to wall or roof 100mm bore pipe complete all as specified and directed.( Fixed in repair)
M&L cutting into existing manholes for connecting new drains, making good to pipes and renderning, cutting out existing benching for and forming branch channel ( 1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1, smooth finished and reforming benching as required for 150 mm internal dia of pipes.
M&L cutting into existing manholes for connecting new drains, making good to pipes and renderning, cutting out existing benching for and forming branch channel ( 1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1, smooth finished and reforming benching as required for 200 mm internal dia of pipes.
Dismantling floor, hearth or wall tiling including cement mortar bedding ( but not backing), removing serviceable,incl removing the demolished material outside the MOD land.
M&L machine pressed pre cast cocrete interlocking decorative paver block PU coated of any size and shape confirming to IS 15658-2006 of 80 mm thickness M-40 grade with grey cement and no pigment, size and shape of paver as approved complete all as specified and directed.
Taking down copper/aluminium point wiring (fan, socket or power) complete including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, Light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors etc. complete all as specified and as directed.
M&L for point wiring with PVC FRLS insulated unsheathed multi-stranded copper conductor of size 1.5 Sqmm 1100 V grade including one run of PVC insulated unsheathed multi stranded copper conductor of size 1.5 sqmm as earth continuity conductor connected to common earth dolly, in existing conduits /PVC casing capping /PVC concealed conduit and its accessories, including replacement of factory made steel boxes suitable for modular switch/sockets including modular plates of suitable size as per site requirement for the following Note: Cutting & chasing, if required, shall be measured/paid under relevant items.
One light/ceiling fan/exhaust fan point controlled by one no ,one way switch 5/6 amps.
One bell / buzzer point controlled by one bell push.
One 3 pin 5 Amps socket outlet point controlled by one no. one way switch, 5/6 amp on independent board.
One 3 pin 5 Amps socket outlet point controlled by one no. one way switch, 5/6 amp on same board.
All as per item No 43 here-in-before but point wiring with 2.5 Sqmm single core copper cable and earth continuity wire with 2.5 Sqmm single core cable for one three pin 15 amp socket outlet point on independent board complete all as specified and as directed.
S&F Modular switch 6 amps 250 V AC one way with ISI mark including 6 amps switch frame complete all as specified and as directed.
S&F modular socket 6 A Multi socket for 2/ 3 pin, 240 volts complete all as specified and as directed.
S&F modular switch 16 A SP one way 240 volts complete all as specified and as directed.
S&F modular socket outlet 16 A-2/3 pin combined 240 volts complete all as specified and as directed.
S&F bell push, flush type 5 A 240 volts complete all as specified and as directed.
S&F modular bell push 6A with Neon 1 module 240 volts complete all as specified and as directed.
S&F electronic fan regulator modular type 100Watt step typer as per existing complete all as specified and as directed.
S&F switch piano flush button single pole one way 6 amps complete all as specified and as directed.
S&F switch piano flush type 15 amps single pole one way complete all as specified and as directed.
S&F socket outlet 5/6 amps 2 in 1, 3 pin flush type complete all as specified and as directed.
S&F socket outlet 2 in 1, 3 pin 5 and 15 amp, flush type complete all as specified and as directed.
S&F in repair electric bell Ding-Dong AC 230 Volt complete all as specified and as directed.
S&F ceiling rose, 3 phase/ PVC/ polycarbonate isolated body complete all as specified and as directed.
S&F sheet metal enclosures for DBs when MCB to be used, SPN double door 240 volt, 12 way with 200 amps rated bus bar complete including taking out oldunserviceable DBs and making good surface of existing distrubed area all as specified and as directed.
S&F sheet metal enclosures for DBs when MCB to be used, SPN double door 240 volt, 8 way with 200 amps rated bus bar complete including taking out oldunserviceable DBs and making good surface of existing distrubed areaall as specified and as directed.
S&F of MCB SPN 40 to 63 Amp 240 volt 10 kA rupture capacity, complete including taking out old unserviceable MCB all as specified and as directed.
S&F of MCB SPN 6 to 32 Amp 240 volt 10 kA rupture capacity, complete including taking out old unserviceable MCBall as specified and as directed.
S&F MCB SP 40 Amp to 63 Amp, 240 V, 10 kA rupture capacity,complete including taking out old unserviceable MCB all as specified and as directed.
S&F MCB SP 6 Amp to 32 Amp 240 volts 10 kA rupture capacity, complete including taking out old unserviceable MCB all as specified and as directed.
S&F sheet Metal enclosure with plug and socket, 10 Amp, 240 volts with one MCB single pole, complete including taking out old unserviceable sheet metal enclosure all as specified and as directed.
S&F sheet Metal enclosure with plug and socket 20 Amp 240 volts with one MCB single pole complete including taking out old unserviceable sheet metal enclosure all as specified and as directed.
S&F in replacement LED batten of 20 Watt 230Volt (size 4 ft), box type complete with LED Tube Light 20 Watt & all accessories internally prewired including connecting up with three core sheathed flexible copper conductor cable of suitable size complete all as specified and as directed.
S&F in replacement of Endura Linear LED batten of 10 W (2 ft.), extruded aluminium heat sink provided for efficient heat dissipation & integrated electronic driver in AC complete all as specified and as directed.
Supply & fix in replacement aesthetically designed Wall mounted decorative wall LED light of 6 W fixture with opal diffuser to give glare free light including suitable LED lamp of 6 W having Lamp base E27 complete all as specified and as directed.
Supply & fix in in replacement aesthetically designed Wall mounted decorative mirror LED light of 3.6 W fixture with opal diffuser to give glare free light including suitable LED lamp of 3.6 W having Lamp base E27 complete all as specified and as directed.
Supply & fix in replacement aesthetically designed recessed/surface mounted decorative downlighter LED light of 15 W fixture with opal diffuser to give glare free light including suitable LED lamp of 15 W complete all as specified and as directed.
Supply & fix in in replacement 2x2 Panel light surface mounted LED light of 36 W fixture with opal diffuser to give glare free light including suitable LED light of 36 W complete all as specified and as directed.
Supply and fix in replacement Metal clad plug top of capacity 20 Amp, 240 volts complete all as specified and as directed.
Supply and fix in replacement Metal clad socket of capacity 20 Amp, 240 volts complete all as specified and as directed.
Supply and fix only decorative laminated sheet 3mm thick of size 8'' X 12'' including necessary cutting of sheet for fixing switch / socket complete all as specified and as directed.
Supply and fix only decorative laminated sheet 3mm thick of size 8'' X 5'' including necessary cutting of sheet for fixing switch / socket complete all as specified and as directed.
Supply and fix only decorative laminated sheet 3mm thick of size 7'' X 4'' including necessary cutting of sheet for fixing switch / socket complete all as specified and as directed.
Supply and fix only decorative laminated T cover sheet 3mm thick of size 2/3 inch dia complete all as specified and as directed.
Supply and fix only fan capacitor of the following capacity :-
Supply and fix only non metallic rigid PVC conduit medium grade 20 mm dia, ISI Mark complete all as specified and as directed.
Supply and fix only non metallic rigid PVC casing caping, ISI Mark complete all as specified and as directed.
M&L for Rewinding of ceiling fan 1200 mm sweep by dismantling of fan motor cutting and removing of burnt windings, cleaning, winding with supper enamelled copper wire of superior quality, same gauge of wire, same Nos of turns, provn of insulation paper applying of varnish drying of varnish and assembling of fan including Taking down and dismantling of blades, transportation to workshop for carrying out rewinding, transportation to site, reinstallation and testing complete complete all as specified and as directed.
M&L for spray painting (white colour) with synthetic enamel paint to Ceiling fans/Exhaust fan of any capacity to reach upto satisfied finish of painting after cleaning and preparation of surface and marking MES No with black synthetic enamel paint complete all as specified and as directed.
Supply & fixing in replacement flat ceiling fan blade suitable for 1200mm sweep ceiling fan,12-15 degree tilted, having 3 Nos in each set complete all as specified and as directed.
Supply & fixing in replacement flat exhaust fan blade suitable for 230/300/400 mm sweep exhaust fan, 12-15 degree tilted, having 3 nos. in each set complete all as specified and as directed.
S&F in repair ventilation fan motor of size 230/250/300 mm including taking down of old ventilation fan motor complete all as specified and directed.
Taking down carefully Geysers 25/50 Ltr capacity, opening for inspection, cleaning, descaling, reassembling and refixing in position after carrying out repairs like soldering/ brazing etc including replacement of pressed rubber gasket, Nuts, bolts, neon indicator lamp 1 Amp etc. complete all as specified and as directed.
M&L for spray painting (white colour) with synthetic enamel paint to Geysers 25/50 Liters capacity to reach upto satisfied finish of painting after cleaning and preparation of surface and marking MES No with black paint complete all as specified and as directed.
M&L in repair for heating element of 2.0 kW (Circular) as required at site including rubber washers (ISI marked) etc complete all as specified and as directed.
M&L in repair for heating element of 2.0 kW (triangular) as required at site including rubber washers (ISI marked) etc complete all as specified and as directed.
S&F in repair storage tank made out of steel sheet of appropriate thickness and confirming to IS 208 (1974) for 25 litre capacity geysers with collar complete duly tested at required pressure complete all as specified and as directed.
M&L for replacement of insulating material (Glass wool) for 25/ 50 litre capacity Geysers complete all as specified and as directed.
M&L in repair for chromium plated copper connection pipe 600/1000 mm long with two brass adopters washers and connecting up complete all as specified and directed.
M&L two way straight pressure safety valve or electric water heater for high pressure release (As per sample).
S&F in repair thermostat (ISI Marked) for 25/50 Liters capacity Geyser complete all as specified and as directed.
S&F in repair indicator lamp (Red & Green) 230 volts suitable for Geyser (as per sample) complete all as specified and as directed.
Supply and fix in repair mild steel hole fastener 10mm dia, 100mm long including nut and washer complete all as specified and as directed.
S&F gang box with modular plate cover two module suitable for fitting one 5Aswitch /socket complete all as specified and as directed.
S&F gang box with modular plate cover four module suitable for fitting one 5A switch and one socket complete all as specified and as directed.
S&F gang box with modular plate cover four module suitable for fitting one 15A switch and one socket complete all as specified and as directed.
S&F gang box with modular plate cover six module suitable for fitting one 5Aswitch /socket complete all as specified and as directed.
S&Fgang box with modular plate cover eight module suitable for fitting one 5A switch and one socket complete all as specified and as directed.
S&F gang box with modular plate cover twelve module suitable for fitting one 15A switch and one socket complete all as specified and as directed.
M&L for taking down ceiling fan & taking out old unsv ceiling fan motor & replacement with new copper winding motor,with head cover by fixing nut bolts complete with accessories 230 volts 1200 mm sweep,300 RPM with air delivery 255/265 Cum/min including making arragement to hanging of fan to ceiling with proper hook nut bolts with approved make all as specified & directed all as specified and as directed by Engr-in-Charge.
S&F in replacement LED Bulb inverter type,9watt,including suitable lamp holder suitable for fitting in pendant holder complete all as specified and directed.
S&F bib tap 15mm bore of cast copper alloy (heavy duty) CP fancy type scrwed to iron pipe and fixed complete all as specified and directed.
S&F stop cock of 15 mm dia cast copper alloy (heavy duty) CP fancy type screwed for iron pipe and fixed complete all as specified and directed.
S&F non return valve for storage water heater(Geyser) complete all as specified and directed.
M& L Cutting chases for concealed water tubing or concealed conduct wiring etc and making good cutting n exc 10cm girth in brick wall complete all as specified and directed.
Supply and laying only Steel water tubings, galvanised, medium grade with all fittings, laid in trenches in old/new position, fixed complete to walls, ceiling, post or laid in floors etc with providing necessary fixing clamps, saddles etc as required in new/old positions, minor consumable spares like safeda, gland dori, soap water etc shall be included in the quoted rate complete as specified and as directed of following bore of size 15mm dia including taking out old unserviceable pipe and making good surface of the existing distrubed area all as directed by Engr-in-charge.
JYOTI ENTERPRISES
J S CONSTRUCTION CO
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .